Ontology type: schema:ScholarlyArticle
2017-11
AUTHORSYeoh Chin Ean, Jong-Hyoung Kim, Si-Geun Choi, Willey Liew Yun Hsien, Nancy Julius Siambun, Seock-Sam Kim
ABSTRACTThe influence of nanopowder on the tribological properties of ta-C films were examined under the lubrication condition. The addition of the tungsten disulphide, WS2 nanopowder in the synthetic oil, polyalpha- olefin, PAO4 was used as the base lubricant in this experiment. The weight percentages of the additive used are 0, 3.0, 4.0, and 5.0 wt % to understand the concentration effect on the tribological behavior of ta- C films in this study. For the sliding test, the result has shown it is not much different in the friction coefficient results for all cases. Whereas, the wear rate result has shown the obvious trend of which the weight percentage of additives changes the wear resistivity. In this study, 3.0 wt % shows the lower wear rate result at 0.1494 × 10–6; 0.1819 × 10–6 mm3/mN for 4.0 and 5.0 wt % shows the highest wear rate result at 0.2393 × 10–6 mm3/mN. These results were due to the changes in surface roughness due to the different amounts of the additive that have been added. More... »
PAGES450-454
http://scigraph.springernature.com/pub.10.3103/s1068366617060034
DOIhttp://dx.doi.org/10.3103/s1068366617060034
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1101336889
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "Universiti of Malaysia Sabah",
"id": "https://www.grid.ac/institutes/grid.265727.3",
"name": [
"Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaysia Sabah, 88450, Sabah, Kota Kinabalu, Malaysia"
],
"type": "Organization"
},
"familyName": "Ean",
"givenName": "Yeoh Chin",
"id": "sg:person.013220105226.57",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013220105226.57"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Korea Institute of Industrial Technology",
"id": "https://www.grid.ac/institutes/grid.454135.2",
"name": [
"Extreme Fabrication Technology Group, Korea Institute of Industrial Technology (KITECH), 711800, Daegu, Korea"
],
"type": "Organization"
},
"familyName": "Kim",
"givenName": "Jong-Hyoung",
"id": "sg:person.010671075513.19",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010671075513.19"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Korea Institute of Industrial Technology",
"id": "https://www.grid.ac/institutes/grid.454135.2",
"name": [
"Extreme Fabrication Technology Group, Korea Institute of Industrial Technology (KITECH), 711800, Daegu, Korea"
],
"type": "Organization"
},
"familyName": "Choi",
"givenName": "Si-Geun",
"id": "sg:person.016230771361.72",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016230771361.72"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Universiti of Malaysia Sabah",
"id": "https://www.grid.ac/institutes/grid.265727.3",
"name": [
"Material and Mineral Research Unit (MMRU), Faculty of Engineering, Universiti Malaysia Sabah, 88450, Sabah, Kota Kinabalu, Malaysia"
],
"type": "Organization"
},
"familyName": "Hsien",
"givenName": "Willey Liew Yun",
"id": "sg:person.015116100761.21",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015116100761.21"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Universiti of Malaysia Sabah",
"id": "https://www.grid.ac/institutes/grid.265727.3",
"name": [
"Material and Mineral Research Unit (MMRU), Faculty of Engineering, Universiti Malaysia Sabah, 88450, Sabah, Kota Kinabalu, Malaysia"
],
"type": "Organization"
},
"familyName": "Siambun",
"givenName": "Nancy Julius",
"id": "sg:person.07677012571.84",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07677012571.84"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Universiti of Malaysia Sabah",
"id": "https://www.grid.ac/institutes/grid.265727.3",
"name": [
"Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaysia Sabah, 88450, Sabah, Kota Kinabalu, Malaysia",
"Material and Mineral Research Unit (MMRU), Faculty of Engineering, Universiti Malaysia Sabah, 88450, Sabah, Kota Kinabalu, Malaysia"
],
"type": "Organization"
},
"familyName": "Kim",
"givenName": "Seock-Sam",
"id": "sg:person.016546540243.09",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016546540243.09"
],
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.1016/j.surfcoat.2016.09.055",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1001046730"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.surfcoat.2012.11.065",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1011758556"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matlet.2014.12.024",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014412636"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1155/2015/983505",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1034651589"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/978-0-387-49891-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1037885650",
"https://doi.org/10.1007/978-0-387-49891-1"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/978-0-387-49891-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1037885650",
"https://doi.org/10.1007/978-0-387-49891-1"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2016.03.015",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1038559306"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2009.08.018",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050275955"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0043-1648(01)00561-0",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050851022"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1021/j100155a009",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1055655367"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1021/ja011477t",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1055773519"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1021/ja011477t",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1055773519"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1021/la00040a006",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1056138939"
],
"type": "CreativeWork"
}
],
"datePublished": "2017-11",
"datePublishedReg": "2017-11-01",
"description": "The influence of nanopowder on the tribological properties of ta-C films were examined under the lubrication condition. The addition of the tungsten disulphide, WS2 nanopowder in the synthetic oil, polyalpha- olefin, PAO4 was used as the base lubricant in this experiment. The weight percentages of the additive used are 0, 3.0, 4.0, and 5.0 wt % to understand the concentration effect on the tribological behavior of ta- C films in this study. For the sliding test, the result has shown it is not much different in the friction coefficient results for all cases. Whereas, the wear rate result has shown the obvious trend of which the weight percentage of additives changes the wear resistivity. In this study, 3.0 wt % shows the lower wear rate result at 0.1494 \u00d7 10\u20136; 0.1819 \u00d7 10\u20136 mm3/mN for 4.0 and 5.0 wt % shows the highest wear rate result at 0.2393 \u00d7 10\u20136 mm3/mN. These results were due to the changes in surface roughness due to the different amounts of the additive that have been added.",
"genre": "research_article",
"id": "sg:pub.10.3103/s1068366617060034",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1136092",
"issn": [
"1068-3666",
"1934-9386"
],
"name": "Journal of Friction and Wear",
"type": "Periodical"
},
{
"issueNumber": "6",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "38"
}
],
"name": "The Effect of WS2 Powder Added Lubricant on Friction and Wear of Tetrahedral Amorphous Carbon Coating Films",
"pagination": "450-454",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"ad2e22635f15aa7f8b2a4630d138b9c1ae11888a7e5fc0ec35fd7716f73c8aef"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.3103/s1068366617060034"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1101336889"
]
}
],
"sameAs": [
"https://doi.org/10.3103/s1068366617060034",
"https://app.dimensions.ai/details/publication/pub.1101336889"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-11T11:04",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000352_0000000352/records_60366_00000003.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.3103%2FS1068366617060034"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.3103/s1068366617060034'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.3103/s1068366617060034'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.3103/s1068366617060034'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.3103/s1068366617060034'
This table displays all metadata directly associated to this object as RDF triples.
134 TRIPLES
21 PREDICATES
38 URIs
19 LITERALS
7 BLANK NODES