Substrate roughness and thickness effects on cold spray nanocrystalline Al−Mg coatings View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2006-06

AUTHORS

P. Richer, B. Jodoin, L. Ajdelsztajn

ABSTRACT

Nanocrystalline Al−Mg coatings were produced using the cold gas dynamic-spraying technique. Unsieved Al−Mg powder of average nanocrystalline grain size in the range of 10 to 30 nm and with a particle size distribution from 10 to >100 μm was used as the feedstock powder. The resulting coatings were evaluated using scanning electron microscopy (SEM), transmission electron microscopy, as well as microhardness and nanoindentation measurements. Coating observations suggest that the wide particle size distribution of the feedstock powder has a detrimental effect on the coating quality but that it can be successfully mitigated by optimizing the spraying parameters. Nanohardness values close to 3.6 GPa were observed in both the feedstock powder and coatings, suggesting the absence of cold-working hardening effects during the process. The effects of the substrate surface roughness and thickness on coating quality were investigated. The deposited mass measurements performed on the coatings showed that the effect of using different grit sizes for the substrate preparation is limited to small changes in the deposition efficiency of only the first few layers of deposited material. The SEM observation showed that the substrate surface roughness has no significant effect on the macrostructures and microstructures of the coating. The ability to use the cold gas dynamic spraying process to produce coatings on thin parts without noticeable substrate damage and with the same quality as coatings produced on thicker substrates was demonstrated in this work. More... »

PAGES

246-254

References to SciGraph publications

  • 2005-03. Synthesis and oxidation behavior of nanocrystalline MCrAlY bond coatings in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2005-03. Cold spray deposition of nanocrystalline aluminum alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2002-12. Cold spray nozzle mach number limitation in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2002-03. Synthesis and nanoindentation study of high-velocity oxygen fuel thermal-sprayed nanocrystalline and near-nanocrystalline Ni coatings in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2002-12. An analysis of the cold spray process and its coatings in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2005-03. A systematic approach to material eligibility for the cold-spray process in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 1999-12. Impact of high velocity cold spray particles in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2000-01. Specific features of microparticle deformation upon impact on a rigid barrier in JOURNAL OF APPLIED MECHANICS AND TECHNICAL PHYSICS
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1361/105996306x108174

    DOI

    http://dx.doi.org/10.1361/105996306x108174

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1049988416


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "University of Ottawa", 
              "id": "https://www.grid.ac/institutes/grid.28046.38", 
              "name": [
                "Department of Mechanical of Engineering, University of Ottawa, ON, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Richer", 
            "givenName": "P.", 
            "id": "sg:person.01173340036.89", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01173340036.89"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Ottawa", 
              "id": "https://www.grid.ac/institutes/grid.28046.38", 
              "name": [
                "Department of Mechanical of Engineering, University of Ottawa, ON, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Jodoin", 
            "givenName": "B.", 
            "id": "sg:person.01260234472.39", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01260234472.39"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of California, Davis", 
              "id": "https://www.grid.ac/institutes/grid.27860.3b", 
              "name": [
                "Department of Chemical Engineering and Materials Science, University of California, 95616-5294, Davis, CA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ajdelsztajn", 
            "givenName": "L.", 
            "id": "sg:person.013773174127.49", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013773174127.49"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1361/105996302770348682", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005405738", 
              "https://doi.org/10.1361/105996302770348682"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actamat.2005.10.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007253959"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0257-8972(02)00919-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007737993"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0257-8972(02)00919-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007737993"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/10599630522693", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012706740", 
              "https://doi.org/10.1361/10599630522693"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0925-8388(93)90020-n", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016349909"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0925-8388(93)90020-n", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016349909"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0169-4332(03)00643-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016534198"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0169-4332(03)00643-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016534198"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00274-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020725941"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00274-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020725941"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996399770350250", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020972880", 
              "https://doi.org/10.1361/105996399770350250"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matlet.2003.09.048", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021872231"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-002-0126-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023417578", 
              "https://doi.org/10.1007/s11661-002-0126-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-002-0126-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023417578", 
              "https://doi.org/10.1007/s11661-002-0126-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/imr.1995.40.2.41", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1031018206"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/10599630522738", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1032520970", 
              "https://doi.org/10.1361/10599630522738"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0040-6090(02)00631-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035282566"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0040-6090(02)00631-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035282566"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0257-8972(02)00018-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036346971"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-005-0182-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039498242", 
              "https://doi.org/10.1007/s11661-005-0182-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-005-0182-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039498242", 
              "https://doi.org/10.1007/s11661-005-0182-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996302770348628", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040726265", 
              "https://doi.org/10.1361/105996302770348628"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00083-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043381722"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00083-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043381722"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02465255", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045272422", 
              "https://doi.org/10.1007/bf02465255"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0043-1648(80)90085-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047168087"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0043-1648(80)90085-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047168087"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2005.02.209", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052778246"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1063/1.1573740", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1057721806"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/kem.197.59", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1072060027"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2006-06", 
        "datePublishedReg": "2006-06-01", 
        "description": "Nanocrystalline Al\u2212Mg coatings were produced using the cold gas dynamic-spraying technique. Unsieved Al\u2212Mg powder of average nanocrystalline grain size in the range of 10 to 30 nm and with a particle size distribution from 10 to >100 \u03bcm was used as the feedstock powder. The resulting coatings were evaluated using scanning electron microscopy (SEM), transmission electron microscopy, as well as microhardness and nanoindentation measurements. Coating observations suggest that the wide particle size distribution of the feedstock powder has a detrimental effect on the coating quality but that it can be successfully mitigated by optimizing the spraying parameters. Nanohardness values close to 3.6 GPa were observed in both the feedstock powder and coatings, suggesting the absence of cold-working hardening effects during the process. The effects of the substrate surface roughness and thickness on coating quality were investigated. The deposited mass measurements performed on the coatings showed that the effect of using different grit sizes for the substrate preparation is limited to small changes in the deposition efficiency of only the first few layers of deposited material. The SEM observation showed that the substrate surface roughness has no significant effect on the macrostructures and microstructures of the coating. The ability to use the cold gas dynamic spraying process to produce coatings on thin parts without noticeable substrate damage and with the same quality as coatings produced on thicker substrates was demonstrated in this work.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1361/105996306x108174", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136229", 
            "issn": [
              "1059-9630", 
              "1544-1016"
            ], 
            "name": "Journal of Thermal Spray Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "2", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "15"
          }
        ], 
        "name": "Substrate roughness and thickness effects on cold spray nanocrystalline Al\u2212Mg coatings", 
        "pagination": "246-254", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "ee20d1b6604591e746b9b5cfb9eb9296a62ae559950fac38a84cfaf1d2d39630"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1361/105996306x108174"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1049988416"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1361/105996306x108174", 
          "https://app.dimensions.ai/details/publication/pub.1049988416"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-10T16:39", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8669_00000501.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1361/105996306X108174"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1361/105996306x108174'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1361/105996306x108174'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1361/105996306x108174'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1361/105996306x108174'


     

    This table displays all metadata directly associated to this object as RDF triples.

    152 TRIPLES      21 PREDICATES      49 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1361/105996306x108174 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N5d5f46faa093462bb48f4dcc3372a35e
    4 schema:citation sg:pub.10.1007/bf02465255
    5 sg:pub.10.1007/s11661-002-0126-1
    6 sg:pub.10.1007/s11661-005-0182-4
    7 sg:pub.10.1361/105996302770348628
    8 sg:pub.10.1361/105996302770348682
    9 sg:pub.10.1361/10599630522693
    10 sg:pub.10.1361/10599630522738
    11 sg:pub.10.1361/105996399770350250
    12 https://doi.org/10.1016/0043-1648(80)90085-x
    13 https://doi.org/10.1016/0925-8388(93)90020-n
    14 https://doi.org/10.1016/j.actamat.2005.10.005
    15 https://doi.org/10.1016/j.matlet.2003.09.048
    16 https://doi.org/10.1016/j.surfcoat.2005.02.209
    17 https://doi.org/10.1016/s0040-6090(02)00631-4
    18 https://doi.org/10.1016/s0169-4332(03)00643-3
    19 https://doi.org/10.1016/s0257-8972(02)00018-x
    20 https://doi.org/10.1016/s0257-8972(02)00919-2
    21 https://doi.org/10.1016/s1359-6454(03)00083-1
    22 https://doi.org/10.1016/s1359-6454(03)00274-x
    23 https://doi.org/10.1063/1.1573740
    24 https://doi.org/10.1179/imr.1995.40.2.41
    25 https://doi.org/10.4028/www.scientific.net/kem.197.59
    26 schema:datePublished 2006-06
    27 schema:datePublishedReg 2006-06-01
    28 schema:description Nanocrystalline Al−Mg coatings were produced using the cold gas dynamic-spraying technique. Unsieved Al−Mg powder of average nanocrystalline grain size in the range of 10 to 30 nm and with a particle size distribution from 10 to >100 μm was used as the feedstock powder. The resulting coatings were evaluated using scanning electron microscopy (SEM), transmission electron microscopy, as well as microhardness and nanoindentation measurements. Coating observations suggest that the wide particle size distribution of the feedstock powder has a detrimental effect on the coating quality but that it can be successfully mitigated by optimizing the spraying parameters. Nanohardness values close to 3.6 GPa were observed in both the feedstock powder and coatings, suggesting the absence of cold-working hardening effects during the process. The effects of the substrate surface roughness and thickness on coating quality were investigated. The deposited mass measurements performed on the coatings showed that the effect of using different grit sizes for the substrate preparation is limited to small changes in the deposition efficiency of only the first few layers of deposited material. The SEM observation showed that the substrate surface roughness has no significant effect on the macrostructures and microstructures of the coating. The ability to use the cold gas dynamic spraying process to produce coatings on thin parts without noticeable substrate damage and with the same quality as coatings produced on thicker substrates was demonstrated in this work.
    29 schema:genre research_article
    30 schema:inLanguage en
    31 schema:isAccessibleForFree false
    32 schema:isPartOf N7c968dcae0f549f883979e7f8892735c
    33 Nf7d932e9a35846f2a31624339a92f90f
    34 sg:journal.1136229
    35 schema:name Substrate roughness and thickness effects on cold spray nanocrystalline Al−Mg coatings
    36 schema:pagination 246-254
    37 schema:productId N1df2fade16c1430586f91e274d1fb235
    38 N5720624cfc1e4b0cad4ff5984ac9f7fe
    39 Nc2952ecb82a145b9bd46db06b9f4b8e0
    40 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049988416
    41 https://doi.org/10.1361/105996306x108174
    42 schema:sdDatePublished 2019-04-10T16:39
    43 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    44 schema:sdPublisher Nc9477ba15f89471f83c54e69c4cb30a3
    45 schema:url http://link.springer.com/10.1361/105996306X108174
    46 sgo:license sg:explorer/license/
    47 sgo:sdDataset articles
    48 rdf:type schema:ScholarlyArticle
    49 N08ce8d5ef1f342849e1be28085d2e026 rdf:first sg:person.013773174127.49
    50 rdf:rest rdf:nil
    51 N1df2fade16c1430586f91e274d1fb235 schema:name doi
    52 schema:value 10.1361/105996306x108174
    53 rdf:type schema:PropertyValue
    54 N5720624cfc1e4b0cad4ff5984ac9f7fe schema:name readcube_id
    55 schema:value ee20d1b6604591e746b9b5cfb9eb9296a62ae559950fac38a84cfaf1d2d39630
    56 rdf:type schema:PropertyValue
    57 N5d5f46faa093462bb48f4dcc3372a35e rdf:first sg:person.01173340036.89
    58 rdf:rest N9db727331cc24cb4b6bc11fa4e15d6c0
    59 N7c968dcae0f549f883979e7f8892735c schema:volumeNumber 15
    60 rdf:type schema:PublicationVolume
    61 N9db727331cc24cb4b6bc11fa4e15d6c0 rdf:first sg:person.01260234472.39
    62 rdf:rest N08ce8d5ef1f342849e1be28085d2e026
    63 Nc2952ecb82a145b9bd46db06b9f4b8e0 schema:name dimensions_id
    64 schema:value pub.1049988416
    65 rdf:type schema:PropertyValue
    66 Nc9477ba15f89471f83c54e69c4cb30a3 schema:name Springer Nature - SN SciGraph project
    67 rdf:type schema:Organization
    68 Nf7d932e9a35846f2a31624339a92f90f schema:issueNumber 2
    69 rdf:type schema:PublicationIssue
    70 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    71 schema:name Engineering
    72 rdf:type schema:DefinedTerm
    73 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    74 schema:name Materials Engineering
    75 rdf:type schema:DefinedTerm
    76 sg:journal.1136229 schema:issn 1059-9630
    77 1544-1016
    78 schema:name Journal of Thermal Spray Technology
    79 rdf:type schema:Periodical
    80 sg:person.01173340036.89 schema:affiliation https://www.grid.ac/institutes/grid.28046.38
    81 schema:familyName Richer
    82 schema:givenName P.
    83 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01173340036.89
    84 rdf:type schema:Person
    85 sg:person.01260234472.39 schema:affiliation https://www.grid.ac/institutes/grid.28046.38
    86 schema:familyName Jodoin
    87 schema:givenName B.
    88 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01260234472.39
    89 rdf:type schema:Person
    90 sg:person.013773174127.49 schema:affiliation https://www.grid.ac/institutes/grid.27860.3b
    91 schema:familyName Ajdelsztajn
    92 schema:givenName L.
    93 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013773174127.49
    94 rdf:type schema:Person
    95 sg:pub.10.1007/bf02465255 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045272422
    96 https://doi.org/10.1007/bf02465255
    97 rdf:type schema:CreativeWork
    98 sg:pub.10.1007/s11661-002-0126-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023417578
    99 https://doi.org/10.1007/s11661-002-0126-1
    100 rdf:type schema:CreativeWork
    101 sg:pub.10.1007/s11661-005-0182-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039498242
    102 https://doi.org/10.1007/s11661-005-0182-4
    103 rdf:type schema:CreativeWork
    104 sg:pub.10.1361/105996302770348628 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040726265
    105 https://doi.org/10.1361/105996302770348628
    106 rdf:type schema:CreativeWork
    107 sg:pub.10.1361/105996302770348682 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005405738
    108 https://doi.org/10.1361/105996302770348682
    109 rdf:type schema:CreativeWork
    110 sg:pub.10.1361/10599630522693 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012706740
    111 https://doi.org/10.1361/10599630522693
    112 rdf:type schema:CreativeWork
    113 sg:pub.10.1361/10599630522738 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032520970
    114 https://doi.org/10.1361/10599630522738
    115 rdf:type schema:CreativeWork
    116 sg:pub.10.1361/105996399770350250 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020972880
    117 https://doi.org/10.1361/105996399770350250
    118 rdf:type schema:CreativeWork
    119 https://doi.org/10.1016/0043-1648(80)90085-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1047168087
    120 rdf:type schema:CreativeWork
    121 https://doi.org/10.1016/0925-8388(93)90020-n schema:sameAs https://app.dimensions.ai/details/publication/pub.1016349909
    122 rdf:type schema:CreativeWork
    123 https://doi.org/10.1016/j.actamat.2005.10.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007253959
    124 rdf:type schema:CreativeWork
    125 https://doi.org/10.1016/j.matlet.2003.09.048 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021872231
    126 rdf:type schema:CreativeWork
    127 https://doi.org/10.1016/j.surfcoat.2005.02.209 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052778246
    128 rdf:type schema:CreativeWork
    129 https://doi.org/10.1016/s0040-6090(02)00631-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035282566
    130 rdf:type schema:CreativeWork
    131 https://doi.org/10.1016/s0169-4332(03)00643-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016534198
    132 rdf:type schema:CreativeWork
    133 https://doi.org/10.1016/s0257-8972(02)00018-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1036346971
    134 rdf:type schema:CreativeWork
    135 https://doi.org/10.1016/s0257-8972(02)00919-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007737993
    136 rdf:type schema:CreativeWork
    137 https://doi.org/10.1016/s1359-6454(03)00083-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043381722
    138 rdf:type schema:CreativeWork
    139 https://doi.org/10.1016/s1359-6454(03)00274-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1020725941
    140 rdf:type schema:CreativeWork
    141 https://doi.org/10.1063/1.1573740 schema:sameAs https://app.dimensions.ai/details/publication/pub.1057721806
    142 rdf:type schema:CreativeWork
    143 https://doi.org/10.1179/imr.1995.40.2.41 schema:sameAs https://app.dimensions.ai/details/publication/pub.1031018206
    144 rdf:type schema:CreativeWork
    145 https://doi.org/10.4028/www.scientific.net/kem.197.59 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072060027
    146 rdf:type schema:CreativeWork
    147 https://www.grid.ac/institutes/grid.27860.3b schema:alternateName University of California, Davis
    148 schema:name Department of Chemical Engineering and Materials Science, University of California, 95616-5294, Davis, CA
    149 rdf:type schema:Organization
    150 https://www.grid.ac/institutes/grid.28046.38 schema:alternateName University of Ottawa
    151 schema:name Department of Mechanical of Engineering, University of Ottawa, ON, Canada
    152 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...