Pneumatic-type surgical robot end-effector for laparoscopic surgical-operation-by-wire View Full Text


Ontology type: schema:ScholarlyArticle      Open Access: True


Article Info

DATE

2014-12

AUTHORS

Chiwon Lee, Woo Jung Park, Myungjoon Kim, Seungwoo Noh, Chiyul Yoon, Choonghee Lee, Youdan Kim, Hyeon Hoe Kim, Hee Chan Kim, Sungwan Kim

ABSTRACT

BACKGROUND: Although minimally invasive surgery (MIS) affords several advantages compared to conventional open surgery, robotic MIS systems still have many limitations. One of the limitations is the non-uniform gripping force due to mechanical strings of the existing systems. To overcome this limitation, a surgical instrument with a pneumatic gripping system consisting of a compressor, catheter balloon, micro motor, and other parts is developed. METHOD: This study aims to implement a surgical instrument with a pneumatic gripping system and pitching/yawing joints using micro motors and without mechanical strings based on the surgical-operation-by-wire (SOBW) concept. A 6-axis external arm for increasing degrees of freedom (DOFs) is integrated with the surgical instrument using LabVIEW® for laparoscopic procedures. The gripping force is measured over a wide range of pressures and compared with the simulated ideal step function. Furthermore, a kinematic analysis is conducted. To validate and evaluate the system's clinical applicability, a simple peg task experiment and workspace identification experiment are performed with five novice volunteers using the fundamentals of laparoscopic surgery (FLS) board kit. The master interface of the proposed system employs the hands-on-throttle-and-stick (HOTAS) controller used in aerospace engineering. To develop an improved HOTAS (iHOTAS) controller, 6-axis force/torque sensor was integrated in the special housing. RESULTS: The mean gripping force (after 1,000 repetitions) at a pressure of 0.3 MPa was measured to be 5.8 N. The reaction time was found to be 0.4 s, which is almost real-time. All novice volunteers could complete the simple peg task within a mean time of 176 s, and none of them exceeded the 300 s cut-off time. The system's workspace was calculated to be 11,157.0 cm3. CONCLUSIONS: The proposed pneumatic gripping system provides a force consistent with that of other robotic MIS systems. It provides near real-time control. It is more durable than the existing other surgical robot systems. Its workspace is sufficient for clinical surgery. Therefore, the proposed system is expected to be widely used for laparoscopic robotic surgery. This research using iHOTAS will be applied to the tactile force feedback system for surgeon's safe operation. More... »

PAGES

130

Identifiers

URI

http://scigraph.springernature.com/pub.10.1186/1475-925x-13-130

DOI

http://dx.doi.org/10.1186/1475-925x-13-130

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1051742241

PUBMED

https://www.ncbi.nlm.nih.gov/pubmed/25189221


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0801", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Artificial Intelligence and Image Processing", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/08", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Information and Computing Sciences", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Equipment Design", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Humans", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Laparoscopy", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Minimally Invasive Surgical Procedures", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Robotic Surgical Procedures", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Interdisciplinary Program for Bioengineering, Graduate School, Seoul National University, 110-744, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Lee", 
        "givenName": "Chiwon", 
        "id": "sg:person.010766162171.19", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010766162171.19"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Interdisciplinary Program for Bioengineering, Graduate School, Seoul National University, 110-744, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Park", 
        "givenName": "Woo Jung", 
        "id": "sg:person.01171304100.47", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01171304100.47"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Interdisciplinary Program for Bioengineering, Graduate School, Seoul National University, 110-744, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kim", 
        "givenName": "Myungjoon", 
        "id": "sg:person.010476312253.40", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010476312253.40"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Interdisciplinary Program for Bioengineering, Graduate School, Seoul National University, 110-744, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Noh", 
        "givenName": "Seungwoo", 
        "id": "sg:person.01244373076.78", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01244373076.78"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Interdisciplinary Program for Bioengineering, Graduate School, Seoul National University, 110-744, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Yoon", 
        "givenName": "Chiyul", 
        "id": "sg:person.01176257676.57", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01176257676.57"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Interdisciplinary Program for Bioengineering, Graduate School, Seoul National University, 110-744, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Lee", 
        "givenName": "Choonghee", 
        "id": "sg:person.0630241600.59", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0630241600.59"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Department of Mechanical & Aerospace Engineering, Seoul National University College of Engineering, 151-742, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kim", 
        "givenName": "Youdan", 
        "id": "sg:person.01061442601.36", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01061442601.36"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University Hospital", 
          "id": "https://www.grid.ac/institutes/grid.412484.f", 
          "name": [
            "Department of Urology, Seoul National University Hospital, 110-744, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kim", 
        "givenName": "Hyeon Hoe", 
        "id": "sg:person.01333213171.37", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01333213171.37"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Department of Biomedical Engineering, Seoul National University College of Medicine, 110-799, Seoul, South Korea", 
            "Institute of Medical and Biological Engineering, Seoul National University, 151-742, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kim", 
        "givenName": "Hee Chan", 
        "id": "sg:person.01100214455.87", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01100214455.87"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Seoul National University", 
          "id": "https://www.grid.ac/institutes/grid.31501.36", 
          "name": [
            "Department of Biomedical Engineering, Seoul National University College of Medicine, 110-799, Seoul, South Korea", 
            "Institute of Medical and Biological Engineering, Seoul National University, 151-742, Seoul, South Korea"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kim", 
        "givenName": "Sungwan", 
        "id": "sg:person.01112430375.19", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01112430375.19"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/s0090-4295(01)01423-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000119266"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0164-1212(94)90061-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007352407"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0164-1212(94)90061-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007352407"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.5772/5015", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012908555"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1097/01.sla.0000103020.19595.7d", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1013048580"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1097/01.sla.0000103020.19595.7d", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1013048580"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.5194/ms-3-85-2012", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014940061"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.surg.2012.07.028", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016846821"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1108/eb035424", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027757909"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/rcs.33", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1028568542"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/rcs.33", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1028568542"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00464-004-9004-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1030704778", 
          "https://doi.org/10.1007/s00464-004-9004-9"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1186/1475-925x-7-23", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034670970", 
          "https://doi.org/10.1186/1475-925x-7-23"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1108/eb034928", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038806475"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00464-009-0769-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048787832", 
          "https://doi.org/10.1007/s00464-009-0769-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00464-009-0769-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048787832", 
          "https://doi.org/10.1007/s00464-009-0769-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.5230/jgc.2012.12.3.156", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1049126073"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.sigpro.2014.04.016", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1050172644"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00464-013-3306-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1053248185", 
          "https://doi.org/10.1007/s00464-013-3306-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/ac00234a011", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1054983100"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1089/end.2010.0306", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1059259048"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/tbme.2012.2226884", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1061529026"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/tbme.2012.2228858", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1061529056"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/tbme.2013.2242070", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1061529148"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/tim.2006.884393", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1061636798"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1115/1.4027043", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1062152356"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1115/1.4027782", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1062153093"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/naecon.1992.220573", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1086315577"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/iros.2007.4399536", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1093173851"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/iembs.1994.415315", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1093257099"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/robot.2010.5509244", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1093638859"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/itime.2011.6130913", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1094244551"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/iembs.1996.656926", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1095786838"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2014-12", 
    "datePublishedReg": "2014-12-01", 
    "description": "BACKGROUND: Although minimally invasive surgery (MIS) affords several advantages compared to conventional open surgery, robotic MIS systems still have many limitations. One of the limitations is the non-uniform gripping force due to mechanical strings of the existing systems. To overcome this limitation, a surgical instrument with a pneumatic gripping system consisting of a compressor, catheter balloon, micro motor, and other parts is developed.\nMETHOD: This study aims to implement a surgical instrument with a pneumatic gripping system and pitching/yawing joints using micro motors and without mechanical strings based on the surgical-operation-by-wire (SOBW) concept. A 6-axis external arm for increasing degrees of freedom (DOFs) is integrated with the surgical instrument using LabVIEW\u00ae for laparoscopic procedures. The gripping force is measured over a wide range of pressures and compared with the simulated ideal step function. Furthermore, a kinematic analysis is conducted. To validate and evaluate the system's clinical applicability, a simple peg task experiment and workspace identification experiment are performed with five novice volunteers using the fundamentals of laparoscopic surgery (FLS) board kit. The master interface of the proposed system employs the hands-on-throttle-and-stick (HOTAS) controller used in aerospace engineering. To develop an improved HOTAS (iHOTAS) controller, 6-axis force/torque sensor was integrated in the special housing.\nRESULTS: The mean gripping force (after 1,000 repetitions) at a pressure of 0.3\u00a0MPa was measured to be 5.8\u00a0N. The reaction time was found to be 0.4\u00a0s, which is almost real-time. All novice volunteers could complete the simple peg task within a mean time of 176\u00a0s, and none of them exceeded the 300\u00a0s cut-off time. The system's workspace was calculated to be 11,157.0\u00a0cm3.\nCONCLUSIONS: The proposed pneumatic gripping system provides a force consistent with that of other robotic MIS systems. It provides near real-time control. It is more durable than the existing other surgical robot systems. Its workspace is sufficient for clinical surgery. Therefore, the proposed system is expected to be widely used for laparoscopic robotic surgery. This research using iHOTAS will be applied to the tactile force feedback system for surgeon's safe operation.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1186/1475-925x-13-130", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": true, 
    "isFundedItemOf": [
      {
        "id": "sg:grant.7455223", 
        "type": "MonetaryGrant"
      }
    ], 
    "isPartOf": [
      {
        "id": "sg:journal.1031014", 
        "issn": [
          "1475-925X"
        ], 
        "name": "BioMedical Engineering OnLine", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "1", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "13"
      }
    ], 
    "name": "Pneumatic-type surgical robot end-effector for laparoscopic surgical-operation-by-wire", 
    "pagination": "130", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "f6790939655cb56fec30daeb1be0eabbaef429dabcde4dfc2c4a50300032f045"
        ]
      }, 
      {
        "name": "pubmed_id", 
        "type": "PropertyValue", 
        "value": [
          "25189221"
        ]
      }, 
      {
        "name": "nlm_unique_id", 
        "type": "PropertyValue", 
        "value": [
          "101147518"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1186/1475-925x-13-130"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1051742241"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1186/1475-925x-13-130", 
      "https://app.dimensions.ai/details/publication/pub.1051742241"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-10T16:35", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8669_00000483.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1186/1475-925X-13-130"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1186/1475-925x-13-130'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1186/1475-925x-13-130'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1186/1475-925x-13-130'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1186/1475-925x-13-130'


 

This table displays all metadata directly associated to this object as RDF triples.

250 TRIPLES      21 PREDICATES      63 URIs      26 LITERALS      14 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1186/1475-925x-13-130 schema:about N75c6f46b211f4f0abb562a706b369c51
2 N8450942036f74396bfe831ae1a37b9ff
3 Naf972abdf41c4777bb116e2b8b23ea1b
4 Ncfa15c4706c84fd59e8920ab0fe022bd
5 Nd29839da6a0846cc817250b7da766972
6 anzsrc-for:08
7 anzsrc-for:0801
8 schema:author N2fc7d30c0c2345cd94e59b2eb04b8d06
9 schema:citation sg:pub.10.1007/s00464-004-9004-9
10 sg:pub.10.1007/s00464-009-0769-8
11 sg:pub.10.1007/s00464-013-3306-8
12 sg:pub.10.1186/1475-925x-7-23
13 https://doi.org/10.1002/rcs.33
14 https://doi.org/10.1016/0164-1212(94)90061-2
15 https://doi.org/10.1016/j.sigpro.2014.04.016
16 https://doi.org/10.1016/j.surg.2012.07.028
17 https://doi.org/10.1016/s0090-4295(01)01423-6
18 https://doi.org/10.1021/ac00234a011
19 https://doi.org/10.1089/end.2010.0306
20 https://doi.org/10.1097/01.sla.0000103020.19595.7d
21 https://doi.org/10.1108/eb034928
22 https://doi.org/10.1108/eb035424
23 https://doi.org/10.1109/iembs.1994.415315
24 https://doi.org/10.1109/iembs.1996.656926
25 https://doi.org/10.1109/iros.2007.4399536
26 https://doi.org/10.1109/itime.2011.6130913
27 https://doi.org/10.1109/naecon.1992.220573
28 https://doi.org/10.1109/robot.2010.5509244
29 https://doi.org/10.1109/tbme.2012.2226884
30 https://doi.org/10.1109/tbme.2012.2228858
31 https://doi.org/10.1109/tbme.2013.2242070
32 https://doi.org/10.1109/tim.2006.884393
33 https://doi.org/10.1115/1.4027043
34 https://doi.org/10.1115/1.4027782
35 https://doi.org/10.5194/ms-3-85-2012
36 https://doi.org/10.5230/jgc.2012.12.3.156
37 https://doi.org/10.5772/5015
38 schema:datePublished 2014-12
39 schema:datePublishedReg 2014-12-01
40 schema:description BACKGROUND: Although minimally invasive surgery (MIS) affords several advantages compared to conventional open surgery, robotic MIS systems still have many limitations. One of the limitations is the non-uniform gripping force due to mechanical strings of the existing systems. To overcome this limitation, a surgical instrument with a pneumatic gripping system consisting of a compressor, catheter balloon, micro motor, and other parts is developed. METHOD: This study aims to implement a surgical instrument with a pneumatic gripping system and pitching/yawing joints using micro motors and without mechanical strings based on the surgical-operation-by-wire (SOBW) concept. A 6-axis external arm for increasing degrees of freedom (DOFs) is integrated with the surgical instrument using LabVIEW® for laparoscopic procedures. The gripping force is measured over a wide range of pressures and compared with the simulated ideal step function. Furthermore, a kinematic analysis is conducted. To validate and evaluate the system's clinical applicability, a simple peg task experiment and workspace identification experiment are performed with five novice volunteers using the fundamentals of laparoscopic surgery (FLS) board kit. The master interface of the proposed system employs the hands-on-throttle-and-stick (HOTAS) controller used in aerospace engineering. To develop an improved HOTAS (iHOTAS) controller, 6-axis force/torque sensor was integrated in the special housing. RESULTS: The mean gripping force (after 1,000 repetitions) at a pressure of 0.3 MPa was measured to be 5.8 N. The reaction time was found to be 0.4 s, which is almost real-time. All novice volunteers could complete the simple peg task within a mean time of 176 s, and none of them exceeded the 300 s cut-off time. The system's workspace was calculated to be 11,157.0 cm3. CONCLUSIONS: The proposed pneumatic gripping system provides a force consistent with that of other robotic MIS systems. It provides near real-time control. It is more durable than the existing other surgical robot systems. Its workspace is sufficient for clinical surgery. Therefore, the proposed system is expected to be widely used for laparoscopic robotic surgery. This research using iHOTAS will be applied to the tactile force feedback system for surgeon's safe operation.
41 schema:genre research_article
42 schema:inLanguage en
43 schema:isAccessibleForFree true
44 schema:isPartOf N156982bd446b4b7fba5d8c30d7ad6667
45 N43abe5a5e295432a860e6952296adfad
46 sg:journal.1031014
47 schema:name Pneumatic-type surgical robot end-effector for laparoscopic surgical-operation-by-wire
48 schema:pagination 130
49 schema:productId N0eb7bda1c45d4c6ea2ce4a089e516114
50 N27823a948ffe41859d006d0cd2476851
51 N5822855ba2054530bafc00355440f454
52 N625450d6baa84ab48fd10e4f6793e4a7
53 Nb7abac60011e4ce997b05717b633c21d
54 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051742241
55 https://doi.org/10.1186/1475-925x-13-130
56 schema:sdDatePublished 2019-04-10T16:35
57 schema:sdLicense https://scigraph.springernature.com/explorer/license/
58 schema:sdPublisher N2505be0ec1a04f628869ead2272a5848
59 schema:url http://link.springer.com/10.1186/1475-925X-13-130
60 sgo:license sg:explorer/license/
61 sgo:sdDataset articles
62 rdf:type schema:ScholarlyArticle
63 N0eb7bda1c45d4c6ea2ce4a089e516114 schema:name doi
64 schema:value 10.1186/1475-925x-13-130
65 rdf:type schema:PropertyValue
66 N156982bd446b4b7fba5d8c30d7ad6667 schema:issueNumber 1
67 rdf:type schema:PublicationIssue
68 N2505be0ec1a04f628869ead2272a5848 schema:name Springer Nature - SN SciGraph project
69 rdf:type schema:Organization
70 N27823a948ffe41859d006d0cd2476851 schema:name nlm_unique_id
71 schema:value 101147518
72 rdf:type schema:PropertyValue
73 N2fc7d30c0c2345cd94e59b2eb04b8d06 rdf:first sg:person.010766162171.19
74 rdf:rest N4544325082694230888fb611d6b2c5ef
75 N43abe5a5e295432a860e6952296adfad schema:volumeNumber 13
76 rdf:type schema:PublicationVolume
77 N4544325082694230888fb611d6b2c5ef rdf:first sg:person.01171304100.47
78 rdf:rest Nc2790f784351470cb8a60c4306ff49ef
79 N4abf533134a241178cf9bf307cd4a909 rdf:first sg:person.01100214455.87
80 rdf:rest Nbdda6635a03547eab7272b99efdd6454
81 N5822855ba2054530bafc00355440f454 schema:name readcube_id
82 schema:value f6790939655cb56fec30daeb1be0eabbaef429dabcde4dfc2c4a50300032f045
83 rdf:type schema:PropertyValue
84 N625450d6baa84ab48fd10e4f6793e4a7 schema:name pubmed_id
85 schema:value 25189221
86 rdf:type schema:PropertyValue
87 N6f70606315134015b9b6da0d4db9004e rdf:first sg:person.01244373076.78
88 rdf:rest N890864caddf5487bb454335e7557296e
89 N75c6f46b211f4f0abb562a706b369c51 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
90 schema:name Laparoscopy
91 rdf:type schema:DefinedTerm
92 N8450942036f74396bfe831ae1a37b9ff schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
93 schema:name Humans
94 rdf:type schema:DefinedTerm
95 N890864caddf5487bb454335e7557296e rdf:first sg:person.01176257676.57
96 rdf:rest Nfd9a5f6ae19441339a6fd3cbd92d8290
97 Naf972abdf41c4777bb116e2b8b23ea1b schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
98 schema:name Robotic Surgical Procedures
99 rdf:type schema:DefinedTerm
100 Nb71cfcf9f4d94adfa8960bf5e0207c95 rdf:first sg:person.01061442601.36
101 rdf:rest Nc3dbfdbb54064bb190198f800d8e7547
102 Nb7abac60011e4ce997b05717b633c21d schema:name dimensions_id
103 schema:value pub.1051742241
104 rdf:type schema:PropertyValue
105 Nbdda6635a03547eab7272b99efdd6454 rdf:first sg:person.01112430375.19
106 rdf:rest rdf:nil
107 Nc2790f784351470cb8a60c4306ff49ef rdf:first sg:person.010476312253.40
108 rdf:rest N6f70606315134015b9b6da0d4db9004e
109 Nc3dbfdbb54064bb190198f800d8e7547 rdf:first sg:person.01333213171.37
110 rdf:rest N4abf533134a241178cf9bf307cd4a909
111 Ncfa15c4706c84fd59e8920ab0fe022bd schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
112 schema:name Minimally Invasive Surgical Procedures
113 rdf:type schema:DefinedTerm
114 Nd29839da6a0846cc817250b7da766972 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
115 schema:name Equipment Design
116 rdf:type schema:DefinedTerm
117 Nfd9a5f6ae19441339a6fd3cbd92d8290 rdf:first sg:person.0630241600.59
118 rdf:rest Nb71cfcf9f4d94adfa8960bf5e0207c95
119 anzsrc-for:08 schema:inDefinedTermSet anzsrc-for:
120 schema:name Information and Computing Sciences
121 rdf:type schema:DefinedTerm
122 anzsrc-for:0801 schema:inDefinedTermSet anzsrc-for:
123 schema:name Artificial Intelligence and Image Processing
124 rdf:type schema:DefinedTerm
125 sg:grant.7455223 http://pending.schema.org/fundedItem sg:pub.10.1186/1475-925x-13-130
126 rdf:type schema:MonetaryGrant
127 sg:journal.1031014 schema:issn 1475-925X
128 schema:name BioMedical Engineering OnLine
129 rdf:type schema:Periodical
130 sg:person.010476312253.40 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
131 schema:familyName Kim
132 schema:givenName Myungjoon
133 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010476312253.40
134 rdf:type schema:Person
135 sg:person.01061442601.36 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
136 schema:familyName Kim
137 schema:givenName Youdan
138 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01061442601.36
139 rdf:type schema:Person
140 sg:person.010766162171.19 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
141 schema:familyName Lee
142 schema:givenName Chiwon
143 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010766162171.19
144 rdf:type schema:Person
145 sg:person.01100214455.87 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
146 schema:familyName Kim
147 schema:givenName Hee Chan
148 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01100214455.87
149 rdf:type schema:Person
150 sg:person.01112430375.19 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
151 schema:familyName Kim
152 schema:givenName Sungwan
153 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01112430375.19
154 rdf:type schema:Person
155 sg:person.01171304100.47 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
156 schema:familyName Park
157 schema:givenName Woo Jung
158 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01171304100.47
159 rdf:type schema:Person
160 sg:person.01176257676.57 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
161 schema:familyName Yoon
162 schema:givenName Chiyul
163 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01176257676.57
164 rdf:type schema:Person
165 sg:person.01244373076.78 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
166 schema:familyName Noh
167 schema:givenName Seungwoo
168 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01244373076.78
169 rdf:type schema:Person
170 sg:person.01333213171.37 schema:affiliation https://www.grid.ac/institutes/grid.412484.f
171 schema:familyName Kim
172 schema:givenName Hyeon Hoe
173 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01333213171.37
174 rdf:type schema:Person
175 sg:person.0630241600.59 schema:affiliation https://www.grid.ac/institutes/grid.31501.36
176 schema:familyName Lee
177 schema:givenName Choonghee
178 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0630241600.59
179 rdf:type schema:Person
180 sg:pub.10.1007/s00464-004-9004-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030704778
181 https://doi.org/10.1007/s00464-004-9004-9
182 rdf:type schema:CreativeWork
183 sg:pub.10.1007/s00464-009-0769-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048787832
184 https://doi.org/10.1007/s00464-009-0769-8
185 rdf:type schema:CreativeWork
186 sg:pub.10.1007/s00464-013-3306-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053248185
187 https://doi.org/10.1007/s00464-013-3306-8
188 rdf:type schema:CreativeWork
189 sg:pub.10.1186/1475-925x-7-23 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034670970
190 https://doi.org/10.1186/1475-925x-7-23
191 rdf:type schema:CreativeWork
192 https://doi.org/10.1002/rcs.33 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028568542
193 rdf:type schema:CreativeWork
194 https://doi.org/10.1016/0164-1212(94)90061-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007352407
195 rdf:type schema:CreativeWork
196 https://doi.org/10.1016/j.sigpro.2014.04.016 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050172644
197 rdf:type schema:CreativeWork
198 https://doi.org/10.1016/j.surg.2012.07.028 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016846821
199 rdf:type schema:CreativeWork
200 https://doi.org/10.1016/s0090-4295(01)01423-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000119266
201 rdf:type schema:CreativeWork
202 https://doi.org/10.1021/ac00234a011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1054983100
203 rdf:type schema:CreativeWork
204 https://doi.org/10.1089/end.2010.0306 schema:sameAs https://app.dimensions.ai/details/publication/pub.1059259048
205 rdf:type schema:CreativeWork
206 https://doi.org/10.1097/01.sla.0000103020.19595.7d schema:sameAs https://app.dimensions.ai/details/publication/pub.1013048580
207 rdf:type schema:CreativeWork
208 https://doi.org/10.1108/eb034928 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038806475
209 rdf:type schema:CreativeWork
210 https://doi.org/10.1108/eb035424 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027757909
211 rdf:type schema:CreativeWork
212 https://doi.org/10.1109/iembs.1994.415315 schema:sameAs https://app.dimensions.ai/details/publication/pub.1093257099
213 rdf:type schema:CreativeWork
214 https://doi.org/10.1109/iembs.1996.656926 schema:sameAs https://app.dimensions.ai/details/publication/pub.1095786838
215 rdf:type schema:CreativeWork
216 https://doi.org/10.1109/iros.2007.4399536 schema:sameAs https://app.dimensions.ai/details/publication/pub.1093173851
217 rdf:type schema:CreativeWork
218 https://doi.org/10.1109/itime.2011.6130913 schema:sameAs https://app.dimensions.ai/details/publication/pub.1094244551
219 rdf:type schema:CreativeWork
220 https://doi.org/10.1109/naecon.1992.220573 schema:sameAs https://app.dimensions.ai/details/publication/pub.1086315577
221 rdf:type schema:CreativeWork
222 https://doi.org/10.1109/robot.2010.5509244 schema:sameAs https://app.dimensions.ai/details/publication/pub.1093638859
223 rdf:type schema:CreativeWork
224 https://doi.org/10.1109/tbme.2012.2226884 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061529026
225 rdf:type schema:CreativeWork
226 https://doi.org/10.1109/tbme.2012.2228858 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061529056
227 rdf:type schema:CreativeWork
228 https://doi.org/10.1109/tbme.2013.2242070 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061529148
229 rdf:type schema:CreativeWork
230 https://doi.org/10.1109/tim.2006.884393 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061636798
231 rdf:type schema:CreativeWork
232 https://doi.org/10.1115/1.4027043 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062152356
233 rdf:type schema:CreativeWork
234 https://doi.org/10.1115/1.4027782 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062153093
235 rdf:type schema:CreativeWork
236 https://doi.org/10.5194/ms-3-85-2012 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014940061
237 rdf:type schema:CreativeWork
238 https://doi.org/10.5230/jgc.2012.12.3.156 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049126073
239 rdf:type schema:CreativeWork
240 https://doi.org/10.5772/5015 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012908555
241 rdf:type schema:CreativeWork
242 https://www.grid.ac/institutes/grid.31501.36 schema:alternateName Seoul National University
243 schema:name Department of Biomedical Engineering, Seoul National University College of Medicine, 110-799, Seoul, South Korea
244 Department of Mechanical & Aerospace Engineering, Seoul National University College of Engineering, 151-742, Seoul, South Korea
245 Institute of Medical and Biological Engineering, Seoul National University, 151-742, Seoul, South Korea
246 Interdisciplinary Program for Bioengineering, Graduate School, Seoul National University, 110-744, Seoul, South Korea
247 rdf:type schema:Organization
248 https://www.grid.ac/institutes/grid.412484.f schema:alternateName Seoul National University Hospital
249 schema:name Department of Urology, Seoul National University Hospital, 110-744, Seoul, South Korea
250 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...