Simulation and improvement of temperature distributions of a framed mould during the autoclave composite curing process View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2013-01

AUTHORS

G. N. Xie, J. Liu, W. H. Zang, G. Lorenzini, C. Biserni

ABSTRACT

It is recognized that the uniformity of mould temperature fields during the composite curing process has a vital important effect on the component and, thereby, the product quality. Previous studies mainly considered the temperature along the thickness direction of the mould or composite component, or under a rather simple external environment, leading to some deviations from the actual composite autoclave curing process. In this paper, taking into consideration some factors such as auxiliaries, framed mould and forced convection phenomenon inside an autoclave, a simulation model has been established on the mould curing temperature field in an autoclave. On this basis, simulation and thermal analysis of the framed mould temperature fields with regard to composite structure and material system in the aviation industry have been performed. Besides, the influences of the time of heat preservation, heating rate have been also investigated, and two nondimensional factors are introduced for evaluating temperature uniformity and heating quality. It is found that increasing the time of heat preservation and the number of periods could improve the uniformity significantly, and, thus, the improvements of heating efficiency and uniformity of temperature field are achieved, and that a smaller heating rate would give much better heating quality. More... »

PAGES

43-61

Identifiers

URI

http://scigraph.springernature.com/pub.10.1134/s1810232813010062

DOI

http://dx.doi.org/10.1134/s1810232813010062

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1019675274


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Northwestern Polytechnical University", 
          "id": "https://www.grid.ac/institutes/grid.440588.5", 
          "name": [
            "Engineering Simulation and Aerospace Computing (ESAC), Northwestern Polytechnical University, P.O. Box 552, 710072, Xi\u2019an, Shaanxi, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Xie", 
        "givenName": "G. N.", 
        "id": "sg:person.016632013735.48", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016632013735.48"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Northwestern Polytechnical University", 
          "id": "https://www.grid.ac/institutes/grid.440588.5", 
          "name": [
            "Engineering Simulation and Aerospace Computing (ESAC), Northwestern Polytechnical University, P.O. Box 552, 710072, Xi\u2019an, Shaanxi, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Liu", 
        "givenName": "J.", 
        "id": "sg:person.07530437757.33", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07530437757.33"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Northwestern Polytechnical University", 
          "id": "https://www.grid.ac/institutes/grid.440588.5", 
          "name": [
            "Engineering Simulation and Aerospace Computing (ESAC), Northwestern Polytechnical University, P.O. Box 552, 710072, Xi\u2019an, Shaanxi, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Zang", 
        "givenName": "W. H.", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "University of Parma", 
          "id": "https://www.grid.ac/institutes/grid.10383.39", 
          "name": [
            "Department of Industrial Engineering, University of Parma, Parco Area delle Scienze, 181/A, 43124, Parma, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Lorenzini", 
        "givenName": "G.", 
        "id": "sg:person.013714140501.81", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013714140501.81"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "University of Bologna", 
          "id": "https://www.grid.ac/institutes/grid.6292.f", 
          "name": [
            "Department of Industrial Engineering, University of Bologna, viale Risorgimento 2, 40136, Bologna, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Biserni", 
        "givenName": "C.", 
        "id": "sg:person.016104462101.46", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016104462101.46"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/s1359-835x(99)00032-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1004448170"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0956-7143(94)90025-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1008858915"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/0021998302036001300", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016737221"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/0021998302036001300", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016737221"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0009-2509(91)80005-j", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1050329498"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839302700301", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051628164"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839302700301", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051628164"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199801772662217", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063621143"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199801772662217", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063621143"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199838301700204", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063624224"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199838301700204", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063624224"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839202600106", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063624631"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839202600106", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063624631"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839703102203", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063625118"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839703102203", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063625118"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839102500302", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1090719910"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839102500302", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1090719910"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2013-01", 
    "datePublishedReg": "2013-01-01", 
    "description": "It is recognized that the uniformity of mould temperature fields during the composite curing process has a vital important effect on the component and, thereby, the product quality. Previous studies mainly considered the temperature along the thickness direction of the mould or composite component, or under a rather simple external environment, leading to some deviations from the actual composite autoclave curing process. In this paper, taking into consideration some factors such as auxiliaries, framed mould and forced convection phenomenon inside an autoclave, a simulation model has been established on the mould curing temperature field in an autoclave. On this basis, simulation and thermal analysis of the framed mould temperature fields with regard to composite structure and material system in the aviation industry have been performed. Besides, the influences of the time of heat preservation, heating rate have been also investigated, and two nondimensional factors are introduced for evaluating temperature uniformity and heating quality. It is found that increasing the time of heat preservation and the number of periods could improve the uniformity significantly, and, thus, the improvements of heating efficiency and uniformity of temperature field are achieved, and that a smaller heating rate would give much better heating quality.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1134/s1810232813010062", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1136561", 
        "issn": [
          "1810-2328", 
          "1990-5432"
        ], 
        "name": "Journal of Engineering Thermophysics", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "1", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "22"
      }
    ], 
    "name": "Simulation and improvement of temperature distributions of a framed mould during the autoclave composite curing process", 
    "pagination": "43-61", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "5dbe6e05b800dc2f2e0efa5e991bdef5a204f612e0ed1d937876b9ea9b47ead5"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1134/s1810232813010062"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1019675274"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1134/s1810232813010062", 
      "https://app.dimensions.ai/details/publication/pub.1019675274"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T01:05", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8697_00000504.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1134%2FS1810232813010062"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1134/s1810232813010062'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1134/s1810232813010062'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1134/s1810232813010062'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1134/s1810232813010062'


 

This table displays all metadata directly associated to this object as RDF triples.

124 TRIPLES      21 PREDICATES      37 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1134/s1810232813010062 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author N2e4e6d36315f4e20b6999fbab8ee1dd1
4 schema:citation https://doi.org/10.1016/0009-2509(91)80005-j
5 https://doi.org/10.1016/0956-7143(94)90025-6
6 https://doi.org/10.1016/s1359-835x(99)00032-9
7 https://doi.org/10.1177/002199801772662217
8 https://doi.org/10.1177/0021998302036001300
9 https://doi.org/10.1177/002199838301700204
10 https://doi.org/10.1177/002199839102500302
11 https://doi.org/10.1177/002199839202600106
12 https://doi.org/10.1177/002199839302700301
13 https://doi.org/10.1177/002199839703102203
14 schema:datePublished 2013-01
15 schema:datePublishedReg 2013-01-01
16 schema:description It is recognized that the uniformity of mould temperature fields during the composite curing process has a vital important effect on the component and, thereby, the product quality. Previous studies mainly considered the temperature along the thickness direction of the mould or composite component, or under a rather simple external environment, leading to some deviations from the actual composite autoclave curing process. In this paper, taking into consideration some factors such as auxiliaries, framed mould and forced convection phenomenon inside an autoclave, a simulation model has been established on the mould curing temperature field in an autoclave. On this basis, simulation and thermal analysis of the framed mould temperature fields with regard to composite structure and material system in the aviation industry have been performed. Besides, the influences of the time of heat preservation, heating rate have been also investigated, and two nondimensional factors are introduced for evaluating temperature uniformity and heating quality. It is found that increasing the time of heat preservation and the number of periods could improve the uniformity significantly, and, thus, the improvements of heating efficiency and uniformity of temperature field are achieved, and that a smaller heating rate would give much better heating quality.
17 schema:genre research_article
18 schema:inLanguage en
19 schema:isAccessibleForFree false
20 schema:isPartOf N34891518b80149c8be9e7314694ccc1c
21 N85771b03000f407cbcc1da86c189b1be
22 sg:journal.1136561
23 schema:name Simulation and improvement of temperature distributions of a framed mould during the autoclave composite curing process
24 schema:pagination 43-61
25 schema:productId N04f4cf69d5d44df39d0e5c867376e620
26 N368885b413e54ee09af6e3e97de72759
27 Nd6ce4e66855f4e7da58a423024975062
28 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019675274
29 https://doi.org/10.1134/s1810232813010062
30 schema:sdDatePublished 2019-04-11T01:05
31 schema:sdLicense https://scigraph.springernature.com/explorer/license/
32 schema:sdPublisher N00db7e6dcbda43e7ba8ee5e3634cbc8d
33 schema:url http://link.springer.com/10.1134%2FS1810232813010062
34 sgo:license sg:explorer/license/
35 sgo:sdDataset articles
36 rdf:type schema:ScholarlyArticle
37 N00db7e6dcbda43e7ba8ee5e3634cbc8d schema:name Springer Nature - SN SciGraph project
38 rdf:type schema:Organization
39 N04f4cf69d5d44df39d0e5c867376e620 schema:name doi
40 schema:value 10.1134/s1810232813010062
41 rdf:type schema:PropertyValue
42 N13f38e38b2b843f28bb54ace53c743fb rdf:first Na59bf0090ee84341852a5e0792cb5ca0
43 rdf:rest Nc51a9905a3bb4045b9ae5acb434a76bc
44 N2e1b1c97bf1b4e40b92ca9ab0a463c13 rdf:first sg:person.016104462101.46
45 rdf:rest rdf:nil
46 N2e4e6d36315f4e20b6999fbab8ee1dd1 rdf:first sg:person.016632013735.48
47 rdf:rest Na3868a7986c3419d8356854ce5c2b91d
48 N34891518b80149c8be9e7314694ccc1c schema:volumeNumber 22
49 rdf:type schema:PublicationVolume
50 N368885b413e54ee09af6e3e97de72759 schema:name readcube_id
51 schema:value 5dbe6e05b800dc2f2e0efa5e991bdef5a204f612e0ed1d937876b9ea9b47ead5
52 rdf:type schema:PropertyValue
53 N85771b03000f407cbcc1da86c189b1be schema:issueNumber 1
54 rdf:type schema:PublicationIssue
55 Na3868a7986c3419d8356854ce5c2b91d rdf:first sg:person.07530437757.33
56 rdf:rest N13f38e38b2b843f28bb54ace53c743fb
57 Na59bf0090ee84341852a5e0792cb5ca0 schema:affiliation https://www.grid.ac/institutes/grid.440588.5
58 schema:familyName Zang
59 schema:givenName W. H.
60 rdf:type schema:Person
61 Nc51a9905a3bb4045b9ae5acb434a76bc rdf:first sg:person.013714140501.81
62 rdf:rest N2e1b1c97bf1b4e40b92ca9ab0a463c13
63 Nd6ce4e66855f4e7da58a423024975062 schema:name dimensions_id
64 schema:value pub.1019675274
65 rdf:type schema:PropertyValue
66 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
67 schema:name Engineering
68 rdf:type schema:DefinedTerm
69 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
70 schema:name Materials Engineering
71 rdf:type schema:DefinedTerm
72 sg:journal.1136561 schema:issn 1810-2328
73 1990-5432
74 schema:name Journal of Engineering Thermophysics
75 rdf:type schema:Periodical
76 sg:person.013714140501.81 schema:affiliation https://www.grid.ac/institutes/grid.10383.39
77 schema:familyName Lorenzini
78 schema:givenName G.
79 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013714140501.81
80 rdf:type schema:Person
81 sg:person.016104462101.46 schema:affiliation https://www.grid.ac/institutes/grid.6292.f
82 schema:familyName Biserni
83 schema:givenName C.
84 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016104462101.46
85 rdf:type schema:Person
86 sg:person.016632013735.48 schema:affiliation https://www.grid.ac/institutes/grid.440588.5
87 schema:familyName Xie
88 schema:givenName G. N.
89 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016632013735.48
90 rdf:type schema:Person
91 sg:person.07530437757.33 schema:affiliation https://www.grid.ac/institutes/grid.440588.5
92 schema:familyName Liu
93 schema:givenName J.
94 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07530437757.33
95 rdf:type schema:Person
96 https://doi.org/10.1016/0009-2509(91)80005-j schema:sameAs https://app.dimensions.ai/details/publication/pub.1050329498
97 rdf:type schema:CreativeWork
98 https://doi.org/10.1016/0956-7143(94)90025-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008858915
99 rdf:type schema:CreativeWork
100 https://doi.org/10.1016/s1359-835x(99)00032-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004448170
101 rdf:type schema:CreativeWork
102 https://doi.org/10.1177/002199801772662217 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063621143
103 rdf:type schema:CreativeWork
104 https://doi.org/10.1177/0021998302036001300 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016737221
105 rdf:type schema:CreativeWork
106 https://doi.org/10.1177/002199838301700204 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063624224
107 rdf:type schema:CreativeWork
108 https://doi.org/10.1177/002199839102500302 schema:sameAs https://app.dimensions.ai/details/publication/pub.1090719910
109 rdf:type schema:CreativeWork
110 https://doi.org/10.1177/002199839202600106 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063624631
111 rdf:type schema:CreativeWork
112 https://doi.org/10.1177/002199839302700301 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051628164
113 rdf:type schema:CreativeWork
114 https://doi.org/10.1177/002199839703102203 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063625118
115 rdf:type schema:CreativeWork
116 https://www.grid.ac/institutes/grid.10383.39 schema:alternateName University of Parma
117 schema:name Department of Industrial Engineering, University of Parma, Parco Area delle Scienze, 181/A, 43124, Parma, Italy
118 rdf:type schema:Organization
119 https://www.grid.ac/institutes/grid.440588.5 schema:alternateName Northwestern Polytechnical University
120 schema:name Engineering Simulation and Aerospace Computing (ESAC), Northwestern Polytechnical University, P.O. Box 552, 710072, Xi’an, Shaanxi, China
121 rdf:type schema:Organization
122 https://www.grid.ac/institutes/grid.6292.f schema:alternateName University of Bologna
123 schema:name Department of Industrial Engineering, University of Bologna, viale Risorgimento 2, 40136, Bologna, Italy
124 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...