Effect of the degree of deformation on the structure and thermal stability of nanocrystalline niobium produced by high-pressure torsion View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2007-04

AUTHORS

E. N. Popova, V. V. Popov, E. P. Romanov, V. P. Pilyugin

ABSTRACT

The effect of the degree of deformation by high-pressure torsion (using five and ten revolutions of anvils) on the structure of niobium and its thermal stability under annealing has been studied using transmission electron microscopy. By deformation with five revolutions, nanocrystalline niobium with a grain size of about 100 nm has been produced, but increasing degree of deformation (using ten revolutions of anvils) has not resulted in a further structure refinement. Besides, the structure obtained at the higher degree of deformation is more imperfect and exhibits lower thermal stability. In the first case (deformation with 5 revolutions of anvils), structure recovery processes have been observed in niobium at 400–600°C, and only at 700°C intense recrystallization accompanied by an increase in the grain size by an order of magnitude occurred; after deformation with ten revolutions of anvils, the structure is thermally unstable already at 500°C, and after annealing at 600–700°C it becomes completely recrystallized. Along with studying structure evolution, changes in the micro-hardness have been investigated and a correlation between this parameter and specific features of the structure has been established. More... »

PAGES

407-413

Identifiers

URI

http://scigraph.springernature.com/pub.10.1134/s0031918x0704014x

DOI

http://dx.doi.org/10.1134/s0031918x0704014x

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1016694926


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/02", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Physical Sciences", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0204", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Condensed Matter Physics", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0914", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Resources Engineering and Extractive Metallurgy", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia", 
          "id": "http://www.grid.ac/institutes/grid.466027.1", 
          "name": [
            "Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Popova", 
        "givenName": "E. N.", 
        "id": "sg:person.011460314734.10", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011460314734.10"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia", 
          "id": "http://www.grid.ac/institutes/grid.466027.1", 
          "name": [
            "Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Popov", 
        "givenName": "V. V.", 
        "id": "sg:person.010722352102.67", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010722352102.67"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia", 
          "id": "http://www.grid.ac/institutes/grid.466027.1", 
          "name": [
            "Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Romanov", 
        "givenName": "E. P.", 
        "id": "sg:person.015545075235.55", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015545075235.55"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia", 
          "id": "http://www.grid.ac/institutes/grid.466027.1", 
          "name": [
            "Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Pilyugin", 
        "givenName": "V. P.", 
        "id": "sg:person.014166747441.69", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014166747441.69"
        ], 
        "type": "Person"
      }
    ], 
    "datePublished": "2007-04", 
    "datePublishedReg": "2007-04-01", 
    "description": "The effect of the degree of deformation by high-pressure torsion (using five and ten revolutions of anvils) on the structure of niobium and its thermal stability under annealing has been studied using transmission electron microscopy. By deformation with five revolutions, nanocrystalline niobium with a grain size of about 100 nm has been produced, but increasing degree of deformation (using ten revolutions of anvils) has not resulted in a further structure refinement. Besides, the structure obtained at the higher degree of deformation is more imperfect and exhibits lower thermal stability. In the first case (deformation with 5 revolutions of anvils), structure recovery processes have been observed in niobium at 400\u2013600\u00b0C, and only at 700\u00b0C intense recrystallization accompanied by an increase in the grain size by an order of magnitude occurred; after deformation with ten revolutions of anvils, the structure is thermally unstable already at 500\u00b0C, and after annealing at 600\u2013700\u00b0C it becomes completely recrystallized. Along with studying structure evolution, changes in the micro-hardness have been investigated and a correlation between this parameter and specific features of the structure has been established.", 
    "genre": "article", 
    "id": "sg:pub.10.1134/s0031918x0704014x", 
    "inLanguage": "en", 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1295452", 
        "issn": [
          "0015-3230", 
          "0031-918X"
        ], 
        "name": "Physics of Metals and Metallography", 
        "publisher": "Pleiades Publishing", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "4", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "103"
      }
    ], 
    "keywords": [
      "high-pressure torsion", 
      "degree of deformation", 
      "nanocrystalline niobium", 
      "thermal stability", 
      "grain size", 
      "low thermal stability", 
      "deformation", 
      "further structure refinement", 
      "transmission electron microscopy", 
      "niobium", 
      "structure evolution", 
      "electron microscopy", 
      "orders of magnitude", 
      "intense recrystallization", 
      "Structures of niobium", 
      "recovery process", 
      "stability", 
      "recrystallization", 
      "annealing", 
      "structure", 
      "torsion", 
      "anvil", 
      "size", 
      "microscopy", 
      "specific features", 
      "parameters", 
      "process", 
      "high degree", 
      "refinement", 
      "effect", 
      "degree", 
      "order", 
      "magnitude", 
      "structure refinement", 
      "increase", 
      "evolution", 
      "revolution", 
      "features", 
      "first case", 
      "cases", 
      "changes", 
      "correlation", 
      "structure recovery processes", 
      "revolutions of anvils"
    ], 
    "name": "Effect of the degree of deformation on the structure and thermal stability of nanocrystalline niobium produced by high-pressure torsion", 
    "pagination": "407-413", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1016694926"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1134/s0031918x0704014x"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1134/s0031918x0704014x", 
      "https://app.dimensions.ai/details/publication/pub.1016694926"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2021-12-01T19:18", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20211201/entities/gbq_results/article/article_446.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1134/s0031918x0704014x"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1134/s0031918x0704014x'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1134/s0031918x0704014x'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1134/s0031918x0704014x'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1134/s0031918x0704014x'


 

This table displays all metadata directly associated to this object as RDF triples.

135 TRIPLES      21 PREDICATES      73 URIs      62 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1134/s0031918x0704014x schema:about anzsrc-for:02
2 anzsrc-for:0204
3 anzsrc-for:09
4 anzsrc-for:0912
5 anzsrc-for:0914
6 schema:author N75c6792593944f5abc0b1e466179bcfb
7 schema:datePublished 2007-04
8 schema:datePublishedReg 2007-04-01
9 schema:description The effect of the degree of deformation by high-pressure torsion (using five and ten revolutions of anvils) on the structure of niobium and its thermal stability under annealing has been studied using transmission electron microscopy. By deformation with five revolutions, nanocrystalline niobium with a grain size of about 100 nm has been produced, but increasing degree of deformation (using ten revolutions of anvils) has not resulted in a further structure refinement. Besides, the structure obtained at the higher degree of deformation is more imperfect and exhibits lower thermal stability. In the first case (deformation with 5 revolutions of anvils), structure recovery processes have been observed in niobium at 400–600°C, and only at 700°C intense recrystallization accompanied by an increase in the grain size by an order of magnitude occurred; after deformation with ten revolutions of anvils, the structure is thermally unstable already at 500°C, and after annealing at 600–700°C it becomes completely recrystallized. Along with studying structure evolution, changes in the micro-hardness have been investigated and a correlation between this parameter and specific features of the structure has been established.
10 schema:genre article
11 schema:inLanguage en
12 schema:isAccessibleForFree false
13 schema:isPartOf N9720dd70a0fe45c4998b8d728cee5cee
14 Nd3fb103f945b44a691042dce487f9cd1
15 sg:journal.1295452
16 schema:keywords Structures of niobium
17 annealing
18 anvil
19 cases
20 changes
21 correlation
22 deformation
23 degree
24 degree of deformation
25 effect
26 electron microscopy
27 evolution
28 features
29 first case
30 further structure refinement
31 grain size
32 high degree
33 high-pressure torsion
34 increase
35 intense recrystallization
36 low thermal stability
37 magnitude
38 microscopy
39 nanocrystalline niobium
40 niobium
41 order
42 orders of magnitude
43 parameters
44 process
45 recovery process
46 recrystallization
47 refinement
48 revolution
49 revolutions of anvils
50 size
51 specific features
52 stability
53 structure
54 structure evolution
55 structure recovery processes
56 structure refinement
57 thermal stability
58 torsion
59 transmission electron microscopy
60 schema:name Effect of the degree of deformation on the structure and thermal stability of nanocrystalline niobium produced by high-pressure torsion
61 schema:pagination 407-413
62 schema:productId Nd95aecad269b496f83bba780c7a0b3fc
63 Nff0e0be80ad34d3b9163466e0882146a
64 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016694926
65 https://doi.org/10.1134/s0031918x0704014x
66 schema:sdDatePublished 2021-12-01T19:18
67 schema:sdLicense https://scigraph.springernature.com/explorer/license/
68 schema:sdPublisher N31d131d3d0bf49f39eef07c8a0c854ea
69 schema:url https://doi.org/10.1134/s0031918x0704014x
70 sgo:license sg:explorer/license/
71 sgo:sdDataset articles
72 rdf:type schema:ScholarlyArticle
73 N31d131d3d0bf49f39eef07c8a0c854ea schema:name Springer Nature - SN SciGraph project
74 rdf:type schema:Organization
75 N3e2bccdabbdc45e197bcf5e4314e8054 rdf:first sg:person.010722352102.67
76 rdf:rest Nda9ee8a13ff84ce8a8da1b9e0907e9fc
77 N7314f20b7f4f4dff901aecbcec1dfdbf rdf:first sg:person.014166747441.69
78 rdf:rest rdf:nil
79 N75c6792593944f5abc0b1e466179bcfb rdf:first sg:person.011460314734.10
80 rdf:rest N3e2bccdabbdc45e197bcf5e4314e8054
81 N9720dd70a0fe45c4998b8d728cee5cee schema:issueNumber 4
82 rdf:type schema:PublicationIssue
83 Nd3fb103f945b44a691042dce487f9cd1 schema:volumeNumber 103
84 rdf:type schema:PublicationVolume
85 Nd95aecad269b496f83bba780c7a0b3fc schema:name doi
86 schema:value 10.1134/s0031918x0704014x
87 rdf:type schema:PropertyValue
88 Nda9ee8a13ff84ce8a8da1b9e0907e9fc rdf:first sg:person.015545075235.55
89 rdf:rest N7314f20b7f4f4dff901aecbcec1dfdbf
90 Nff0e0be80ad34d3b9163466e0882146a schema:name dimensions_id
91 schema:value pub.1016694926
92 rdf:type schema:PropertyValue
93 anzsrc-for:02 schema:inDefinedTermSet anzsrc-for:
94 schema:name Physical Sciences
95 rdf:type schema:DefinedTerm
96 anzsrc-for:0204 schema:inDefinedTermSet anzsrc-for:
97 schema:name Condensed Matter Physics
98 rdf:type schema:DefinedTerm
99 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
100 schema:name Engineering
101 rdf:type schema:DefinedTerm
102 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
103 schema:name Materials Engineering
104 rdf:type schema:DefinedTerm
105 anzsrc-for:0914 schema:inDefinedTermSet anzsrc-for:
106 schema:name Resources Engineering and Extractive Metallurgy
107 rdf:type schema:DefinedTerm
108 sg:journal.1295452 schema:issn 0015-3230
109 0031-918X
110 schema:name Physics of Metals and Metallography
111 schema:publisher Pleiades Publishing
112 rdf:type schema:Periodical
113 sg:person.010722352102.67 schema:affiliation grid-institutes:grid.466027.1
114 schema:familyName Popov
115 schema:givenName V. V.
116 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010722352102.67
117 rdf:type schema:Person
118 sg:person.011460314734.10 schema:affiliation grid-institutes:grid.466027.1
119 schema:familyName Popova
120 schema:givenName E. N.
121 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011460314734.10
122 rdf:type schema:Person
123 sg:person.014166747441.69 schema:affiliation grid-institutes:grid.466027.1
124 schema:familyName Pilyugin
125 schema:givenName V. P.
126 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014166747441.69
127 rdf:type schema:Person
128 sg:person.015545075235.55 schema:affiliation grid-institutes:grid.466027.1
129 schema:familyName Romanov
130 schema:givenName E. P.
131 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015545075235.55
132 rdf:type schema:Person
133 grid-institutes:grid.466027.1 schema:alternateName Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia
134 schema:name Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. S. Kovalevskoi 18, 620041, Ekaterinburg, Russia
135 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...