Optimization of the preparation conditions of polygranular carbons from mesophase View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2003-02

AUTHORS

F. Fanjul, M. Granda, R. Santamaría, R. Menéndez

ABSTRACT

Polygranular carbons were prepared from a coal-tar pitch based mesophase by sintering, using different experimental conditions. The temperature and time of mesophase stabilization, the pressure applied during moulding, and the sintering heating rate were investigated in order to obtain materials with optimum properties. Oxidative stabilization with air between 225 and 250°C causes a significant reduction in the plasticity of the coal-tar pitch based mesophase, allowing moulding and sintering to be performed. An increase in the moulding pressure results in an increase in the bulk density of the green materials. However, sintering must be carried out at low heating rates in order to control the release of gases and thus avoid damage to the sintered material. Higher sintering heating rates are compatible with low moulding pressures and a high degree of stabilization. Whenever the materials do not distort during sintering, a common feature observed is that mechanical and electrical properties improve with increasing moulding pressure, while an increase in sintering heating rate only serves to improve the strength of the materials. More... »

PAGES

427-435

Identifiers

URI

http://scigraph.springernature.com/pub.10.1023/a:1021859329162

DOI

http://dx.doi.org/10.1023/a:1021859329162

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1024556328


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Instituto Nacional del Carb\u00f3n", 
          "id": "https://www.grid.ac/institutes/grid.425217.7", 
          "name": [
            "Instituto Nacional del Carb\u00f3n, CSIC. C/Francisco Pintado Fe, 26, 33011-, Oviedo, Spain"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Fanjul", 
        "givenName": "F.", 
        "id": "sg:person.010055307524.46", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010055307524.46"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Instituto Nacional del Carb\u00f3n", 
          "id": "https://www.grid.ac/institutes/grid.425217.7", 
          "name": [
            "Instituto Nacional del Carb\u00f3n, CSIC. C/Francisco Pintado Fe, 26, 33011-, Oviedo, Spain"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Granda", 
        "givenName": "M.", 
        "id": "sg:person.010367445326.14", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010367445326.14"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Instituto Nacional del Carb\u00f3n", 
          "id": "https://www.grid.ac/institutes/grid.425217.7", 
          "name": [
            "Instituto Nacional del Carb\u00f3n, CSIC. C/Francisco Pintado Fe, 26, 33011-, Oviedo, Spain"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Santamar\u00eda", 
        "givenName": "R.", 
        "id": "sg:person.0732302000.54", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0732302000.54"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Instituto Nacional del Carb\u00f3n", 
          "id": "https://www.grid.ac/institutes/grid.425217.7", 
          "name": [
            "Instituto Nacional del Carb\u00f3n, CSIC. C/Francisco Pintado Fe, 26, 33011-, Oviedo, Spain"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Men\u00e9ndez", 
        "givenName": "R.", 
        "id": "sg:person.01046530400.76", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01046530400.76"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/0008-6223(94)90218-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007326912"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0008-6223(94)90218-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007326912"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0008-6223(94)90219-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1010427320"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0008-6223(94)90219-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1010427320"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0165-2370(00)00132-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012432283"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0008-6223(94)00134-l", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1019543396"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0016-2361(02)00189-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1019679966"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(98)00292-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1020159506"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0008-6223(88)90163-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021403965"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0008-6223(88)90163-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021403965"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(98)00299-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023641294"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1023/a:1018587418496", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1025856870", 
          "https://doi.org/10.1023/a:1018587418496"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(96)00118-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026144085"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1023/a:1004672117361", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026837524", 
          "https://doi.org/10.1023/a:1004672117361"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(98)00081-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1028304427"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(99)00169-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036024505"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(02)00185-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036594091"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(99)00243-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1037031027"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(97)84651-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1037157198"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0165-2370(01)00158-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038063041"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0008-6223(98)00298-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1043841449"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0008-6223(87)90123-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1044468210"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0008-6223(87)90123-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1044468210"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2003-02", 
    "datePublishedReg": "2003-02-01", 
    "description": "Polygranular carbons were prepared from a coal-tar pitch based mesophase by sintering, using different experimental conditions. The temperature and time of mesophase stabilization, the pressure applied during moulding, and the sintering heating rate were investigated in order to obtain materials with optimum properties. Oxidative stabilization with air between 225 and 250\u00b0C causes a significant reduction in the plasticity of the coal-tar pitch based mesophase, allowing moulding and sintering to be performed. An increase in the moulding pressure results in an increase in the bulk density of the green materials. However, sintering must be carried out at low heating rates in order to control the release of gases and thus avoid damage to the sintered material. Higher sintering heating rates are compatible with low moulding pressures and a high degree of stabilization. Whenever the materials do not distort during sintering, a common feature observed is that mechanical and electrical properties improve with increasing moulding pressure, while an increase in sintering heating rate only serves to improve the strength of the materials.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1023/a:1021859329162", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1312116", 
        "issn": [
          "0022-2461", 
          "1573-4811"
        ], 
        "name": "Journal of Materials Science", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "3", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "38"
      }
    ], 
    "name": "Optimization of the preparation conditions of polygranular carbons from mesophase", 
    "pagination": "427-435", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "74fc799dceed479f4a5e43a4814ced2f632dd5ddcf051be0071faf4a5ea767fe"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1023/a:1021859329162"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1024556328"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1023/a:1021859329162", 
      "https://app.dimensions.ai/details/publication/pub.1024556328"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-10T20:45", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8684_00000505.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1023%2FA%3A1021859329162"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1023/a:1021859329162'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1023/a:1021859329162'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1023/a:1021859329162'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1023/a:1021859329162'


 

This table displays all metadata directly associated to this object as RDF triples.

141 TRIPLES      21 PREDICATES      46 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1023/a:1021859329162 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author N8fd05fb05e78424f981dc0c4429ca100
4 schema:citation sg:pub.10.1023/a:1004672117361
5 sg:pub.10.1023/a:1018587418496
6 https://doi.org/10.1016/0008-6223(87)90123-0
7 https://doi.org/10.1016/0008-6223(88)90163-7
8 https://doi.org/10.1016/0008-6223(94)00134-l
9 https://doi.org/10.1016/0008-6223(94)90218-6
10 https://doi.org/10.1016/0008-6223(94)90219-4
11 https://doi.org/10.1016/s0008-6223(02)00185-9
12 https://doi.org/10.1016/s0008-6223(96)00118-2
13 https://doi.org/10.1016/s0008-6223(97)84651-9
14 https://doi.org/10.1016/s0008-6223(98)00081-5
15 https://doi.org/10.1016/s0008-6223(98)00292-9
16 https://doi.org/10.1016/s0008-6223(98)00298-x
17 https://doi.org/10.1016/s0008-6223(98)00299-1
18 https://doi.org/10.1016/s0008-6223(99)00169-4
19 https://doi.org/10.1016/s0008-6223(99)00243-2
20 https://doi.org/10.1016/s0016-2361(02)00189-8
21 https://doi.org/10.1016/s0165-2370(00)00132-7
22 https://doi.org/10.1016/s0165-2370(01)00158-9
23 schema:datePublished 2003-02
24 schema:datePublishedReg 2003-02-01
25 schema:description Polygranular carbons were prepared from a coal-tar pitch based mesophase by sintering, using different experimental conditions. The temperature and time of mesophase stabilization, the pressure applied during moulding, and the sintering heating rate were investigated in order to obtain materials with optimum properties. Oxidative stabilization with air between 225 and 250°C causes a significant reduction in the plasticity of the coal-tar pitch based mesophase, allowing moulding and sintering to be performed. An increase in the moulding pressure results in an increase in the bulk density of the green materials. However, sintering must be carried out at low heating rates in order to control the release of gases and thus avoid damage to the sintered material. Higher sintering heating rates are compatible with low moulding pressures and a high degree of stabilization. Whenever the materials do not distort during sintering, a common feature observed is that mechanical and electrical properties improve with increasing moulding pressure, while an increase in sintering heating rate only serves to improve the strength of the materials.
26 schema:genre research_article
27 schema:inLanguage en
28 schema:isAccessibleForFree false
29 schema:isPartOf N9a9d2bf4d7f84c34b3304a36ae1464b2
30 Na640d67685c9402d87df8c433984bb60
31 sg:journal.1312116
32 schema:name Optimization of the preparation conditions of polygranular carbons from mesophase
33 schema:pagination 427-435
34 schema:productId N7372d04801744d7babf9e77a2516bc1e
35 Na9ccf608d30b43c4ab633c916d5c655c
36 Nb2eece8e227547019cde0ff4ed5664ce
37 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024556328
38 https://doi.org/10.1023/a:1021859329162
39 schema:sdDatePublished 2019-04-10T20:45
40 schema:sdLicense https://scigraph.springernature.com/explorer/license/
41 schema:sdPublisher Nbc631c02630941cca446af17fc147835
42 schema:url http://link.springer.com/10.1023%2FA%3A1021859329162
43 sgo:license sg:explorer/license/
44 sgo:sdDataset articles
45 rdf:type schema:ScholarlyArticle
46 N09b81e1ed15f46c3bf45e839c6f58a0b rdf:first sg:person.01046530400.76
47 rdf:rest rdf:nil
48 N55b0546714be46f2abdd4979ccf01817 rdf:first sg:person.010367445326.14
49 rdf:rest N9714b2e49d0344e682aeea31502f3a61
50 N7372d04801744d7babf9e77a2516bc1e schema:name readcube_id
51 schema:value 74fc799dceed479f4a5e43a4814ced2f632dd5ddcf051be0071faf4a5ea767fe
52 rdf:type schema:PropertyValue
53 N8fd05fb05e78424f981dc0c4429ca100 rdf:first sg:person.010055307524.46
54 rdf:rest N55b0546714be46f2abdd4979ccf01817
55 N9714b2e49d0344e682aeea31502f3a61 rdf:first sg:person.0732302000.54
56 rdf:rest N09b81e1ed15f46c3bf45e839c6f58a0b
57 N9a9d2bf4d7f84c34b3304a36ae1464b2 schema:issueNumber 3
58 rdf:type schema:PublicationIssue
59 Na640d67685c9402d87df8c433984bb60 schema:volumeNumber 38
60 rdf:type schema:PublicationVolume
61 Na9ccf608d30b43c4ab633c916d5c655c schema:name dimensions_id
62 schema:value pub.1024556328
63 rdf:type schema:PropertyValue
64 Nb2eece8e227547019cde0ff4ed5664ce schema:name doi
65 schema:value 10.1023/a:1021859329162
66 rdf:type schema:PropertyValue
67 Nbc631c02630941cca446af17fc147835 schema:name Springer Nature - SN SciGraph project
68 rdf:type schema:Organization
69 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
70 schema:name Engineering
71 rdf:type schema:DefinedTerm
72 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
73 schema:name Materials Engineering
74 rdf:type schema:DefinedTerm
75 sg:journal.1312116 schema:issn 0022-2461
76 1573-4811
77 schema:name Journal of Materials Science
78 rdf:type schema:Periodical
79 sg:person.010055307524.46 schema:affiliation https://www.grid.ac/institutes/grid.425217.7
80 schema:familyName Fanjul
81 schema:givenName F.
82 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010055307524.46
83 rdf:type schema:Person
84 sg:person.010367445326.14 schema:affiliation https://www.grid.ac/institutes/grid.425217.7
85 schema:familyName Granda
86 schema:givenName M.
87 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010367445326.14
88 rdf:type schema:Person
89 sg:person.01046530400.76 schema:affiliation https://www.grid.ac/institutes/grid.425217.7
90 schema:familyName Menéndez
91 schema:givenName R.
92 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01046530400.76
93 rdf:type schema:Person
94 sg:person.0732302000.54 schema:affiliation https://www.grid.ac/institutes/grid.425217.7
95 schema:familyName Santamaría
96 schema:givenName R.
97 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0732302000.54
98 rdf:type schema:Person
99 sg:pub.10.1023/a:1004672117361 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026837524
100 https://doi.org/10.1023/a:1004672117361
101 rdf:type schema:CreativeWork
102 sg:pub.10.1023/a:1018587418496 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025856870
103 https://doi.org/10.1023/a:1018587418496
104 rdf:type schema:CreativeWork
105 https://doi.org/10.1016/0008-6223(87)90123-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044468210
106 rdf:type schema:CreativeWork
107 https://doi.org/10.1016/0008-6223(88)90163-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021403965
108 rdf:type schema:CreativeWork
109 https://doi.org/10.1016/0008-6223(94)00134-l schema:sameAs https://app.dimensions.ai/details/publication/pub.1019543396
110 rdf:type schema:CreativeWork
111 https://doi.org/10.1016/0008-6223(94)90218-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007326912
112 rdf:type schema:CreativeWork
113 https://doi.org/10.1016/0008-6223(94)90219-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010427320
114 rdf:type schema:CreativeWork
115 https://doi.org/10.1016/s0008-6223(02)00185-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036594091
116 rdf:type schema:CreativeWork
117 https://doi.org/10.1016/s0008-6223(96)00118-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026144085
118 rdf:type schema:CreativeWork
119 https://doi.org/10.1016/s0008-6223(97)84651-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037157198
120 rdf:type schema:CreativeWork
121 https://doi.org/10.1016/s0008-6223(98)00081-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028304427
122 rdf:type schema:CreativeWork
123 https://doi.org/10.1016/s0008-6223(98)00292-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020159506
124 rdf:type schema:CreativeWork
125 https://doi.org/10.1016/s0008-6223(98)00298-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1043841449
126 rdf:type schema:CreativeWork
127 https://doi.org/10.1016/s0008-6223(98)00299-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023641294
128 rdf:type schema:CreativeWork
129 https://doi.org/10.1016/s0008-6223(99)00169-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036024505
130 rdf:type schema:CreativeWork
131 https://doi.org/10.1016/s0008-6223(99)00243-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037031027
132 rdf:type schema:CreativeWork
133 https://doi.org/10.1016/s0016-2361(02)00189-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019679966
134 rdf:type schema:CreativeWork
135 https://doi.org/10.1016/s0165-2370(00)00132-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012432283
136 rdf:type schema:CreativeWork
137 https://doi.org/10.1016/s0165-2370(01)00158-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038063041
138 rdf:type schema:CreativeWork
139 https://www.grid.ac/institutes/grid.425217.7 schema:alternateName Instituto Nacional del Carbón
140 schema:name Instituto Nacional del Carbón, CSIC. C/Francisco Pintado Fe, 26, 33011-, Oviedo, Spain
141 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...