Two-phase sink vortex suction mechanism and penetration dynamic characteristics in ladle teeming process View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2017-07

AUTHORS

Da-peng Tan, Ye-sha Ni, Li-bin Zhang

ABSTRACT

At the late stage of continuous casting (CC) ladle teeming, sink vortex can suck the liquid slag into tundish, and cause negative influences on the cleanliness of molten steel. To address this issue, a two-phase fluid mechanical modeling method for ladle teeming was proposed. Firstly, a dynamic model for vortex suction process was built, and the profiles of vortex flow field were acquired. Then, based on the level set method (LSM), a two-phase 3D interface coupling model for slag entrapment was built. Finally, in combination with high-order essentially non-oscillatory (ENO) and total variation diminishing (TVD) methods, a LSM-based numerical solution method was proposed to obtain the 3D coupling evolution regularities in vortex suction process. Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity; there is a pressure oscillation phenomenon at the vortex penetration state, which is caused by the energy shock of two-phase vortex penetration coupling. More... »

PAGES

669-677

References to SciGraph publications

  • 2006-02. Mathematical simulation of fluid dynamics during steel draining operations from a ladle in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • 2013-12. Softness consolidation abrasives material removal characteristic oriented to laser hardening surface in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2009-01. Application of Improved HMM Algorithm in Slag Detection System in JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
  • 2013-07. Parameters optimization of a novel 5-DOF gasbag polishing machine tool in CHINESE JOURNAL OF MECHANICAL ENGINEERING
  • 2007-02. Flow of Steel in Mold Region During Continuous Casting in JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
  • 2012-08. Softness abrasive flow method oriented to tiny scale mold structural surface in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2010-10. Analytical method for softness abrasive flow field based on discrete phase model in SCIENCE CHINA TECHNOLOGICAL SCIENCES
  • 2010-09. Development of vibration style ladle slag detection methods and the key technologies in SCIENCE CHINA TECHNOLOGICAL SCIENCES
  • 2016-07. An improved soft abrasive flow finishing method based on fluid collision theory in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2016-02. Research on dynamic characteristic of softness consolidation abrasives in machining process in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2006-05. Solid Reference Electrode of Metallurgical Oxygen Sensor in JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
  • 2016-04. Solidification structure of continuous casting large round billets under mold electromagnetic stirring in JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
  • 2014-10. Investigation on machining characteristic of pneumatic wheel based on softness consolidation abrasives in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1016/s1006-706x(17)30101-2

    DOI

    http://dx.doi.org/10.1016/s1006-706x(17)30101-2

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1090374670


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0915", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Interdisciplinary Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Zhejiang University of Technology", 
              "id": "https://www.grid.ac/institutes/grid.469325.f", 
              "name": [
                "Key Laboratory of E & M, Ministry of Education & Zhejiang Province, Zhejiang University of Technology, 310014, Hangzhou, Zhejiang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Tan", 
            "givenName": "Da-peng", 
            "id": "sg:person.012130642732.30", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012130642732.30"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Zhejiang University of Technology", 
              "id": "https://www.grid.ac/institutes/grid.469325.f", 
              "name": [
                "Key Laboratory of E & M, Ministry of Education & Zhejiang Province, Zhejiang University of Technology, 310014, Hangzhou, Zhejiang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ni", 
            "givenName": "Ye-sha", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Zhejiang University of Technology", 
              "id": "https://www.grid.ac/institutes/grid.469325.f", 
              "name": [
                "Key Laboratory of E & M, Ministry of Education & Zhejiang Province, Zhejiang University of Technology, 310014, Hangzhou, Zhejiang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zhang", 
            "givenName": "Li-bin", 
            "id": "sg:person.01105215205.06", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01105215205.06"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/j.apenergy.2014.12.026", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000199237"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2355/isijinternational.isijint-2015-096", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001551419"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/srin.199400919", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002750948"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0020-7403(96)00052-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1003517979"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2355/isijinternational.50.26", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004583538"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2355/isijinternational.50.26", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004583538"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-013-4985-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005653280", 
              "https://doi.org/10.1007/s00170-013-4985-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2355/isijinternational.53.782", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007323299"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-015-7392-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009557646", 
              "https://doi.org/10.1007/s00170-015-7392-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1034/j.1600-0692.2001.300207.x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014878607"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.snb.2014.06.014", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018652605"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-015-8044-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020352508", 
              "https://doi.org/10.1007/s00170-015-8044-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11431-010-4046-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024609296", 
              "https://doi.org/10.1007/s11431-010-4046-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11431-010-4046-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024609296", 
              "https://doi.org/10.1007/s11431-010-4046-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/030192304225019315", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025953573"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msea.2005.09.071", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027233226"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11431-010-4073-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027615861", 
              "https://doi.org/10.1007/s11431-010-4073-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11431-010-4073-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027615861", 
              "https://doi.org/10.1007/s11431-010-4073-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1016/s1006-706x(07)60023-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038749715", 
              "https://doi.org/10.1016/s1006-706x(07)60023-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1016/s1006-706x(09)60001-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039298208", 
              "https://doi.org/10.1016/s1006-706x(09)60001-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-014-0560-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040116655", 
              "https://doi.org/10.1007/s12541-014-0560-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-014-0560-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040116655", 
              "https://doi.org/10.1007/s12541-014-0560-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11663-006-0087-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045355393", 
              "https://doi.org/10.1007/s11663-006-0087-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11663-006-0087-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045355393", 
              "https://doi.org/10.1007/s11663-006-0087-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1016/s1006-706x(06)60088-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047857528", 
              "https://doi.org/10.1016/s1006-706x(06)60088-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1016/s1006-706x(16)30053-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051541325", 
              "https://doi.org/10.1016/s1006-706x(16)30053-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-011-3621-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052942639", 
              "https://doi.org/10.1007/s00170-011-3621-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-011-3621-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052942639", 
              "https://doi.org/10.1007/s00170-011-3621-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1109/te.2012.2212707", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1061587821"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1109/tie.2012.2213559", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1061625762"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1109/tpel.2012.2188043", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1061758079"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.3901/cjme.2013.04.680", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1071546867", 
              "https://doi.org/10.3901/cjme.2013.04.680"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/kem.353-358.3067", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1072073665"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2017-07", 
        "datePublishedReg": "2017-07-01", 
        "description": "At the late stage of continuous casting (CC) ladle teeming, sink vortex can suck the liquid slag into tundish, and cause negative influences on the cleanliness of molten steel. To address this issue, a two-phase fluid mechanical modeling method for ladle teeming was proposed. Firstly, a dynamic model for vortex suction process was built, and the profiles of vortex flow field were acquired. Then, based on the level set method (LSM), a two-phase 3D interface coupling model for slag entrapment was built. Finally, in combination with high-order essentially non-oscillatory (ENO) and total variation diminishing (TVD) methods, a LSM-based numerical solution method was proposed to obtain the 3D coupling evolution regularities in vortex suction process. Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity; there is a pressure oscillation phenomenon at the vortex penetration state, which is caused by the energy shock of two-phase vortex penetration coupling.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1016/s1006-706x(17)30101-2", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1037242", 
            "issn": [
              "1001-0963", 
              "2210-3988"
            ], 
            "name": "Journal of Iron and Steel Research International", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "7", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "24"
          }
        ], 
        "name": "Two-phase sink vortex suction mechanism and penetration dynamic characteristics in ladle teeming process", 
        "pagination": "669-677", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "2f047d29388a3e8ddbf576013597d16a80e5a74aed4caffe3699d15402e97d2f"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1016/s1006-706x(17)30101-2"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1090374670"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1016/s1006-706x(17)30101-2", 
          "https://app.dimensions.ai/details/publication/pub.1090374670"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T01:55", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8700_00000493.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1016/S1006-706X(17)30101-2"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1016/s1006-706x(17)30101-2'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1016/s1006-706x(17)30101-2'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1016/s1006-706x(17)30101-2'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1016/s1006-706x(17)30101-2'


     

    This table displays all metadata directly associated to this object as RDF triples.

    168 TRIPLES      21 PREDICATES      54 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1016/s1006-706x(17)30101-2 schema:about anzsrc-for:09
    2 anzsrc-for:0915
    3 schema:author N8d55b34b84cd4ae2bd7c28ec8246c3cd
    4 schema:citation sg:pub.10.1007/s00170-011-3621-y
    5 sg:pub.10.1007/s00170-013-4985-y
    6 sg:pub.10.1007/s00170-015-7392-8
    7 sg:pub.10.1007/s00170-015-8044-8
    8 sg:pub.10.1007/s11431-010-4046-9
    9 sg:pub.10.1007/s11431-010-4073-6
    10 sg:pub.10.1007/s11663-006-0087-7
    11 sg:pub.10.1007/s12541-014-0560-1
    12 sg:pub.10.1016/s1006-706x(06)60088-5
    13 sg:pub.10.1016/s1006-706x(07)60023-5
    14 sg:pub.10.1016/s1006-706x(09)60001-7
    15 sg:pub.10.1016/s1006-706x(16)30053-x
    16 sg:pub.10.3901/cjme.2013.04.680
    17 https://doi.org/10.1002/srin.199400919
    18 https://doi.org/10.1016/0020-7403(96)00052-5
    19 https://doi.org/10.1016/j.apenergy.2014.12.026
    20 https://doi.org/10.1016/j.msea.2005.09.071
    21 https://doi.org/10.1016/j.snb.2014.06.014
    22 https://doi.org/10.1034/j.1600-0692.2001.300207.x
    23 https://doi.org/10.1109/te.2012.2212707
    24 https://doi.org/10.1109/tie.2012.2213559
    25 https://doi.org/10.1109/tpel.2012.2188043
    26 https://doi.org/10.1179/030192304225019315
    27 https://doi.org/10.2355/isijinternational.50.26
    28 https://doi.org/10.2355/isijinternational.53.782
    29 https://doi.org/10.2355/isijinternational.isijint-2015-096
    30 https://doi.org/10.4028/www.scientific.net/kem.353-358.3067
    31 schema:datePublished 2017-07
    32 schema:datePublishedReg 2017-07-01
    33 schema:description At the late stage of continuous casting (CC) ladle teeming, sink vortex can suck the liquid slag into tundish, and cause negative influences on the cleanliness of molten steel. To address this issue, a two-phase fluid mechanical modeling method for ladle teeming was proposed. Firstly, a dynamic model for vortex suction process was built, and the profiles of vortex flow field were acquired. Then, based on the level set method (LSM), a two-phase 3D interface coupling model for slag entrapment was built. Finally, in combination with high-order essentially non-oscillatory (ENO) and total variation diminishing (TVD) methods, a LSM-based numerical solution method was proposed to obtain the 3D coupling evolution regularities in vortex suction process. Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity; there is a pressure oscillation phenomenon at the vortex penetration state, which is caused by the energy shock of two-phase vortex penetration coupling.
    34 schema:genre research_article
    35 schema:inLanguage en
    36 schema:isAccessibleForFree false
    37 schema:isPartOf N880ef8ce2f0f453b8274df7206d1763c
    38 Ne1fdcdfe4fef43628692bc78dab652c2
    39 sg:journal.1037242
    40 schema:name Two-phase sink vortex suction mechanism and penetration dynamic characteristics in ladle teeming process
    41 schema:pagination 669-677
    42 schema:productId N9dd29f5d5d4b45fea18f16840b20df93
    43 Naef54faa44eb41fba8de00e50161e090
    44 Nc15b5734fecd4a249acb1d9de9e5cb05
    45 schema:sameAs https://app.dimensions.ai/details/publication/pub.1090374670
    46 https://doi.org/10.1016/s1006-706x(17)30101-2
    47 schema:sdDatePublished 2019-04-11T01:55
    48 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    49 schema:sdPublisher N9ad6ff425a4a43e4b689b6e117ee8f2b
    50 schema:url http://link.springer.com/10.1016/S1006-706X(17)30101-2
    51 sgo:license sg:explorer/license/
    52 sgo:sdDataset articles
    53 rdf:type schema:ScholarlyArticle
    54 N04bd057faddb4447a664124a76317b06 rdf:first N78f6b75d01b74f46835b9d982c0c9423
    55 rdf:rest Nd7f90a35dc7d4e33984bdfd402841309
    56 N78f6b75d01b74f46835b9d982c0c9423 schema:affiliation https://www.grid.ac/institutes/grid.469325.f
    57 schema:familyName Ni
    58 schema:givenName Ye-sha
    59 rdf:type schema:Person
    60 N880ef8ce2f0f453b8274df7206d1763c schema:volumeNumber 24
    61 rdf:type schema:PublicationVolume
    62 N8d55b34b84cd4ae2bd7c28ec8246c3cd rdf:first sg:person.012130642732.30
    63 rdf:rest N04bd057faddb4447a664124a76317b06
    64 N9ad6ff425a4a43e4b689b6e117ee8f2b schema:name Springer Nature - SN SciGraph project
    65 rdf:type schema:Organization
    66 N9dd29f5d5d4b45fea18f16840b20df93 schema:name dimensions_id
    67 schema:value pub.1090374670
    68 rdf:type schema:PropertyValue
    69 Naef54faa44eb41fba8de00e50161e090 schema:name doi
    70 schema:value 10.1016/s1006-706x(17)30101-2
    71 rdf:type schema:PropertyValue
    72 Nc15b5734fecd4a249acb1d9de9e5cb05 schema:name readcube_id
    73 schema:value 2f047d29388a3e8ddbf576013597d16a80e5a74aed4caffe3699d15402e97d2f
    74 rdf:type schema:PropertyValue
    75 Nd7f90a35dc7d4e33984bdfd402841309 rdf:first sg:person.01105215205.06
    76 rdf:rest rdf:nil
    77 Ne1fdcdfe4fef43628692bc78dab652c2 schema:issueNumber 7
    78 rdf:type schema:PublicationIssue
    79 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    80 schema:name Engineering
    81 rdf:type schema:DefinedTerm
    82 anzsrc-for:0915 schema:inDefinedTermSet anzsrc-for:
    83 schema:name Interdisciplinary Engineering
    84 rdf:type schema:DefinedTerm
    85 sg:journal.1037242 schema:issn 1001-0963
    86 2210-3988
    87 schema:name Journal of Iron and Steel Research International
    88 rdf:type schema:Periodical
    89 sg:person.01105215205.06 schema:affiliation https://www.grid.ac/institutes/grid.469325.f
    90 schema:familyName Zhang
    91 schema:givenName Li-bin
    92 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01105215205.06
    93 rdf:type schema:Person
    94 sg:person.012130642732.30 schema:affiliation https://www.grid.ac/institutes/grid.469325.f
    95 schema:familyName Tan
    96 schema:givenName Da-peng
    97 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012130642732.30
    98 rdf:type schema:Person
    99 sg:pub.10.1007/s00170-011-3621-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1052942639
    100 https://doi.org/10.1007/s00170-011-3621-y
    101 rdf:type schema:CreativeWork
    102 sg:pub.10.1007/s00170-013-4985-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1005653280
    103 https://doi.org/10.1007/s00170-013-4985-y
    104 rdf:type schema:CreativeWork
    105 sg:pub.10.1007/s00170-015-7392-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009557646
    106 https://doi.org/10.1007/s00170-015-7392-8
    107 rdf:type schema:CreativeWork
    108 sg:pub.10.1007/s00170-015-8044-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020352508
    109 https://doi.org/10.1007/s00170-015-8044-8
    110 rdf:type schema:CreativeWork
    111 sg:pub.10.1007/s11431-010-4046-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024609296
    112 https://doi.org/10.1007/s11431-010-4046-9
    113 rdf:type schema:CreativeWork
    114 sg:pub.10.1007/s11431-010-4073-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027615861
    115 https://doi.org/10.1007/s11431-010-4073-6
    116 rdf:type schema:CreativeWork
    117 sg:pub.10.1007/s11663-006-0087-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045355393
    118 https://doi.org/10.1007/s11663-006-0087-7
    119 rdf:type schema:CreativeWork
    120 sg:pub.10.1007/s12541-014-0560-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040116655
    121 https://doi.org/10.1007/s12541-014-0560-1
    122 rdf:type schema:CreativeWork
    123 sg:pub.10.1016/s1006-706x(06)60088-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047857528
    124 https://doi.org/10.1016/s1006-706x(06)60088-5
    125 rdf:type schema:CreativeWork
    126 sg:pub.10.1016/s1006-706x(07)60023-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038749715
    127 https://doi.org/10.1016/s1006-706x(07)60023-5
    128 rdf:type schema:CreativeWork
    129 sg:pub.10.1016/s1006-706x(09)60001-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039298208
    130 https://doi.org/10.1016/s1006-706x(09)60001-7
    131 rdf:type schema:CreativeWork
    132 sg:pub.10.1016/s1006-706x(16)30053-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1051541325
    133 https://doi.org/10.1016/s1006-706x(16)30053-x
    134 rdf:type schema:CreativeWork
    135 sg:pub.10.3901/cjme.2013.04.680 schema:sameAs https://app.dimensions.ai/details/publication/pub.1071546867
    136 https://doi.org/10.3901/cjme.2013.04.680
    137 rdf:type schema:CreativeWork
    138 https://doi.org/10.1002/srin.199400919 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002750948
    139 rdf:type schema:CreativeWork
    140 https://doi.org/10.1016/0020-7403(96)00052-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003517979
    141 rdf:type schema:CreativeWork
    142 https://doi.org/10.1016/j.apenergy.2014.12.026 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000199237
    143 rdf:type schema:CreativeWork
    144 https://doi.org/10.1016/j.msea.2005.09.071 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027233226
    145 rdf:type schema:CreativeWork
    146 https://doi.org/10.1016/j.snb.2014.06.014 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018652605
    147 rdf:type schema:CreativeWork
    148 https://doi.org/10.1034/j.1600-0692.2001.300207.x schema:sameAs https://app.dimensions.ai/details/publication/pub.1014878607
    149 rdf:type schema:CreativeWork
    150 https://doi.org/10.1109/te.2012.2212707 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061587821
    151 rdf:type schema:CreativeWork
    152 https://doi.org/10.1109/tie.2012.2213559 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061625762
    153 rdf:type schema:CreativeWork
    154 https://doi.org/10.1109/tpel.2012.2188043 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061758079
    155 rdf:type schema:CreativeWork
    156 https://doi.org/10.1179/030192304225019315 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025953573
    157 rdf:type schema:CreativeWork
    158 https://doi.org/10.2355/isijinternational.50.26 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004583538
    159 rdf:type schema:CreativeWork
    160 https://doi.org/10.2355/isijinternational.53.782 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007323299
    161 rdf:type schema:CreativeWork
    162 https://doi.org/10.2355/isijinternational.isijint-2015-096 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001551419
    163 rdf:type schema:CreativeWork
    164 https://doi.org/10.4028/www.scientific.net/kem.353-358.3067 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072073665
    165 rdf:type schema:CreativeWork
    166 https://www.grid.ac/institutes/grid.469325.f schema:alternateName Zhejiang University of Technology
    167 schema:name Key Laboratory of E & M, Ministry of Education & Zhejiang Province, Zhejiang University of Technology, 310014, Hangzhou, Zhejiang, China
    168 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...