Distribution Characteristics and Reinforcing Behavior of (Ti, Nb)C Reinforced Particle in the Coating Fabricated by Laser Rapid Cladding View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2016-02-01

AUTHORS

Qing-tang LI, Yong-ping LEI, Han-guang FU, Zhong-wei WU, LIN Jian

ABSTRACT

(Ti, Nb)C reinforced Fe-based laser coatings were prepared with normal and high scanning velocities of the laser beam. The distribution characteristics of reinforced particles in the coatings were investigated. The mechanical properties of coatings were tested. The results showed that the morphologies of the microstructure and the reinforced particle changed dramatically at high solidification rate due to rapid laser processing compared with that prepared by normal processing. Two kinds of particles were observed in the coating. One was (Ti, Nb)C multiple carbide particle with the size of micron and sub-micron scales, in which a mass of dislocations were found. Another was nano-sized particle including α-Fe and (Ti, Nb) C obtained by rapid solidification. The microstructure of the coatings was highly refined and a large number of twin crystals were found in matrix. The results of mechanical properties test revealed that the wear resistance of the coating was improved by rapid laser processing, compared with that of the coating prepared with normal speeds. The above-mentioned conclusion indicated that rapid laser cladding can promote not only the processing efficiency but also the mechanical properties of the coating. More... »

PAGES

124-129

References to SciGraph publications

  • 2009-04-01. Effect of Co on Microstructure and Interfacial Properties of Fe-Based Laser Cladding in JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
  • 2012-07-01. Microstructure and Impact Wear Resistance of TiN Reinforced High Manganese Steel Matrix in JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1016/s1006-706x(16)30023-1

    DOI

    http://dx.doi.org/10.1016/s1006-706x(16)30023-1

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1033319513


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China", 
              "id": "http://www.grid.ac/institutes/grid.28703.3e", 
              "name": [
                "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "LI", 
            "givenName": "Qing-tang", 
            "id": "sg:person.012434331443.13", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012434331443.13"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China", 
              "id": "http://www.grid.ac/institutes/grid.28703.3e", 
              "name": [
                "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "LEI", 
            "givenName": "Yong-ping", 
            "id": "sg:person.012521025203.12", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012521025203.12"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China", 
              "id": "http://www.grid.ac/institutes/grid.28703.3e", 
              "name": [
                "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "FU", 
            "givenName": "Han-guang", 
            "id": "sg:person.016117416053.11", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016117416053.11"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China", 
              "id": "http://www.grid.ac/institutes/grid.28703.3e", 
              "name": [
                "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "WU", 
            "givenName": "Zhong-wei", 
            "id": "sg:person.013014274511.04", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013014274511.04"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China", 
              "id": "http://www.grid.ac/institutes/grid.28703.3e", 
              "name": [
                "School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Jian", 
            "givenName": "LIN", 
            "id": "sg:person.012212050143.54", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012212050143.54"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1016/s1006-706x(12)60114-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1003461298", 
              "https://doi.org/10.1016/s1006-706x(12)60114-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1016/s1006-706x(09)60066-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044590997", 
              "https://doi.org/10.1016/s1006-706x(09)60066-2"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2016-02-01", 
        "datePublishedReg": "2016-02-01", 
        "description": "(Ti, Nb)C reinforced Fe-based laser coatings were prepared with normal and high scanning velocities of the laser beam. The distribution characteristics of reinforced particles in the coatings were investigated. The mechanical properties of coatings were tested. The results showed that the morphologies of the microstructure and the reinforced particle changed dramatically at high solidification rate due to rapid laser processing compared with that prepared by normal processing. Two kinds of particles were observed in the coating. One was (Ti, Nb)C multiple carbide particle with the size of micron and sub-micron scales, in which a mass of dislocations were found. Another was nano-sized particle including \u03b1-Fe and (Ti, Nb) C obtained by rapid solidification. The microstructure of the coatings was highly refined and a large number of twin crystals were found in matrix. The results of mechanical properties test revealed that the wear resistance of the coating was improved by rapid laser processing, compared with that of the coating prepared with normal speeds. The above-mentioned conclusion indicated that rapid laser cladding can promote not only the processing efficiency but also the mechanical properties of the coating.", 
        "genre": "article", 
        "id": "sg:pub.10.1016/s1006-706x(16)30023-1", 
        "inLanguage": "en", 
        "isAccessibleForFree": false, 
        "isFundedItemOf": [
          {
            "id": "sg:grant.7191105", 
            "type": "MonetaryGrant"
          }, 
          {
            "id": "sg:grant.7208413", 
            "type": "MonetaryGrant"
          }
        ], 
        "isPartOf": [
          {
            "id": "sg:journal.1037242", 
            "issn": [
              "1001-0963", 
              "2210-3988"
            ], 
            "name": "Journal of Iron and Steel Research International", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "2", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "23"
          }
        ], 
        "keywords": [
          "laser processing", 
          "mechanical properties", 
          "multiple carbide particle", 
          "mass of dislocations", 
          "mechanical property tests", 
          "high solidification rate", 
          "higher scanning velocity", 
          "nano-sized particles", 
          "size of microns", 
          "sub-micron scale", 
          "reinforced particle", 
          "laser cladding", 
          "carbide particles", 
          "wear resistance", 
          "laser coating", 
          "rapid cladding", 
          "distribution characteristics", 
          "rapid solidification", 
          "solidification rate", 
          "property tests", 
          "scanning velocity", 
          "coatings", 
          "kinds of particles", 
          "microstructure", 
          "cladding", 
          "laser beam", 
          "particles", 
          "twin crystals", 
          "processing efficiency", 
          "Ti", 
          "solidification", 
          "processing", 
          "properties", 
          "normal speed", 
          "velocity", 
          "Fe", 
          "speed", 
          "characteristics", 
          "beam", 
          "dislocations", 
          "efficiency", 
          "microns", 
          "morphology", 
          "matrix", 
          "resistance", 
          "behavior", 
          "results", 
          "size", 
          "test", 
          "crystals", 
          "kind", 
          "large number", 
          "scale", 
          "rate", 
          "mass", 
          "number", 
          "normal processing", 
          "conclusion", 
          "rapid laser processing", 
          "rapid laser cladding", 
          "Reinforcing Behavior", 
          "Laser Rapid Cladding"
        ], 
        "name": "Distribution Characteristics and Reinforcing Behavior of (Ti, Nb)C Reinforced Particle in the Coating Fabricated by Laser Rapid Cladding", 
        "pagination": "124-129", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1033319513"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1016/s1006-706x(16)30023-1"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1016/s1006-706x(16)30023-1", 
          "https://app.dimensions.ai/details/publication/pub.1033319513"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2021-11-01T18:28", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20211101/entities/gbq_results/article/article_718.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1016/s1006-706x(16)30023-1"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1016/s1006-706x(16)30023-1'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1016/s1006-706x(16)30023-1'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1016/s1006-706x(16)30023-1'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1016/s1006-706x(16)30023-1'


     

    This table displays all metadata directly associated to this object as RDF triples.

    160 TRIPLES      22 PREDICATES      89 URIs      79 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1016/s1006-706x(16)30023-1 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N526db700e5fb4b47bfedef3d2b2ab45f
    4 schema:citation sg:pub.10.1016/s1006-706x(09)60066-2
    5 sg:pub.10.1016/s1006-706x(12)60114-9
    6 schema:datePublished 2016-02-01
    7 schema:datePublishedReg 2016-02-01
    8 schema:description (Ti, Nb)C reinforced Fe-based laser coatings were prepared with normal and high scanning velocities of the laser beam. The distribution characteristics of reinforced particles in the coatings were investigated. The mechanical properties of coatings were tested. The results showed that the morphologies of the microstructure and the reinforced particle changed dramatically at high solidification rate due to rapid laser processing compared with that prepared by normal processing. Two kinds of particles were observed in the coating. One was (Ti, Nb)C multiple carbide particle with the size of micron and sub-micron scales, in which a mass of dislocations were found. Another was nano-sized particle including α-Fe and (Ti, Nb) C obtained by rapid solidification. The microstructure of the coatings was highly refined and a large number of twin crystals were found in matrix. The results of mechanical properties test revealed that the wear resistance of the coating was improved by rapid laser processing, compared with that of the coating prepared with normal speeds. The above-mentioned conclusion indicated that rapid laser cladding can promote not only the processing efficiency but also the mechanical properties of the coating.
    9 schema:genre article
    10 schema:inLanguage en
    11 schema:isAccessibleForFree false
    12 schema:isPartOf N39e4b8ce67b64186beb952faa4bc2763
    13 Ne37e196defb94272a5ee89444db6b583
    14 sg:journal.1037242
    15 schema:keywords Fe
    16 Laser Rapid Cladding
    17 Reinforcing Behavior
    18 Ti
    19 beam
    20 behavior
    21 carbide particles
    22 characteristics
    23 cladding
    24 coatings
    25 conclusion
    26 crystals
    27 dislocations
    28 distribution characteristics
    29 efficiency
    30 high solidification rate
    31 higher scanning velocity
    32 kind
    33 kinds of particles
    34 large number
    35 laser beam
    36 laser cladding
    37 laser coating
    38 laser processing
    39 mass
    40 mass of dislocations
    41 matrix
    42 mechanical properties
    43 mechanical property tests
    44 microns
    45 microstructure
    46 morphology
    47 multiple carbide particle
    48 nano-sized particles
    49 normal processing
    50 normal speed
    51 number
    52 particles
    53 processing
    54 processing efficiency
    55 properties
    56 property tests
    57 rapid cladding
    58 rapid laser cladding
    59 rapid laser processing
    60 rapid solidification
    61 rate
    62 reinforced particle
    63 resistance
    64 results
    65 scale
    66 scanning velocity
    67 size
    68 size of microns
    69 solidification
    70 solidification rate
    71 speed
    72 sub-micron scale
    73 test
    74 twin crystals
    75 velocity
    76 wear resistance
    77 schema:name Distribution Characteristics and Reinforcing Behavior of (Ti, Nb)C Reinforced Particle in the Coating Fabricated by Laser Rapid Cladding
    78 schema:pagination 124-129
    79 schema:productId N304bfc1168484c6cbb5e65b89a4d042e
    80 N3da10121e2164f6a8df4a08fe0102e24
    81 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033319513
    82 https://doi.org/10.1016/s1006-706x(16)30023-1
    83 schema:sdDatePublished 2021-11-01T18:28
    84 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    85 schema:sdPublisher Na2e9e82282fb44b7be09dbc4f00f5fa1
    86 schema:url https://doi.org/10.1016/s1006-706x(16)30023-1
    87 sgo:license sg:explorer/license/
    88 sgo:sdDataset articles
    89 rdf:type schema:ScholarlyArticle
    90 N304bfc1168484c6cbb5e65b89a4d042e schema:name doi
    91 schema:value 10.1016/s1006-706x(16)30023-1
    92 rdf:type schema:PropertyValue
    93 N39e4b8ce67b64186beb952faa4bc2763 schema:issueNumber 2
    94 rdf:type schema:PublicationIssue
    95 N3afd87fd8d3b467c9484a3c2dc521e54 rdf:first sg:person.016117416053.11
    96 rdf:rest Nfe93bfa588a04fb684f279a14fdc25e5
    97 N3da10121e2164f6a8df4a08fe0102e24 schema:name dimensions_id
    98 schema:value pub.1033319513
    99 rdf:type schema:PropertyValue
    100 N526db700e5fb4b47bfedef3d2b2ab45f rdf:first sg:person.012434331443.13
    101 rdf:rest Naf817670e9e24169b9bbf9a8d123f804
    102 Na2e9e82282fb44b7be09dbc4f00f5fa1 schema:name Springer Nature - SN SciGraph project
    103 rdf:type schema:Organization
    104 Naf817670e9e24169b9bbf9a8d123f804 rdf:first sg:person.012521025203.12
    105 rdf:rest N3afd87fd8d3b467c9484a3c2dc521e54
    106 Ne37e196defb94272a5ee89444db6b583 schema:volumeNumber 23
    107 rdf:type schema:PublicationVolume
    108 Nfe93bfa588a04fb684f279a14fdc25e5 rdf:first sg:person.013014274511.04
    109 rdf:rest Nfff9502bb18f435a971ca6a8611db05f
    110 Nfff9502bb18f435a971ca6a8611db05f rdf:first sg:person.012212050143.54
    111 rdf:rest rdf:nil
    112 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    113 schema:name Engineering
    114 rdf:type schema:DefinedTerm
    115 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    116 schema:name Materials Engineering
    117 rdf:type schema:DefinedTerm
    118 sg:grant.7191105 http://pending.schema.org/fundedItem sg:pub.10.1016/s1006-706x(16)30023-1
    119 rdf:type schema:MonetaryGrant
    120 sg:grant.7208413 http://pending.schema.org/fundedItem sg:pub.10.1016/s1006-706x(16)30023-1
    121 rdf:type schema:MonetaryGrant
    122 sg:journal.1037242 schema:issn 1001-0963
    123 2210-3988
    124 schema:name Journal of Iron and Steel Research International
    125 schema:publisher Springer Nature
    126 rdf:type schema:Periodical
    127 sg:person.012212050143.54 schema:affiliation grid-institutes:grid.28703.3e
    128 schema:familyName Jian
    129 schema:givenName LIN
    130 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012212050143.54
    131 rdf:type schema:Person
    132 sg:person.012434331443.13 schema:affiliation grid-institutes:grid.28703.3e
    133 schema:familyName LI
    134 schema:givenName Qing-tang
    135 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012434331443.13
    136 rdf:type schema:Person
    137 sg:person.012521025203.12 schema:affiliation grid-institutes:grid.28703.3e
    138 schema:familyName LEI
    139 schema:givenName Yong-ping
    140 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012521025203.12
    141 rdf:type schema:Person
    142 sg:person.013014274511.04 schema:affiliation grid-institutes:grid.28703.3e
    143 schema:familyName WU
    144 schema:givenName Zhong-wei
    145 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013014274511.04
    146 rdf:type schema:Person
    147 sg:person.016117416053.11 schema:affiliation grid-institutes:grid.28703.3e
    148 schema:familyName FU
    149 schema:givenName Han-guang
    150 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016117416053.11
    151 rdf:type schema:Person
    152 sg:pub.10.1016/s1006-706x(09)60066-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044590997
    153 https://doi.org/10.1016/s1006-706x(09)60066-2
    154 rdf:type schema:CreativeWork
    155 sg:pub.10.1016/s1006-706x(12)60114-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003461298
    156 https://doi.org/10.1016/s1006-706x(12)60114-9
    157 rdf:type schema:CreativeWork
    158 grid-institutes:grid.28703.3e schema:alternateName School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China
    159 schema:name School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China
    160 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...