Foamy phase change materials based on linear low-density polyethylene and paraffin wax blends View Full Text


Ontology type: schema:ScholarlyArticle      Open Access: True


Article Info

DATE

2018-06

AUTHORS

Anton Popelka, Patrik Sobolčiak, Miroslav Mrlík, Zuzana Nogellova, Ivan Chodák, Mabrouk Ouederni, Mariam A. Al-Maadeed, Igor Krupa

ABSTRACT

Foamy phase-change materials (FPCMs) based on linear low-density polyethylene (LLDPE) blended with 30 wt.% of paraffin wax (W) were successfully prepared for the first time. The advantage of these materials is their double functionality. First, they serve as standard thermal insulators, and second, the paraffin wax acts as a phase change component that absorbs thermal energy (the latent heat) during melting if the temperature increases above its melting point, which ensures better heat protection of buildings, for instance, against overheating. The density of the porous fabricated FPCM was 0.2898 g/cm3 with pore content 69 vol.% and gel portion achieved 27.5 wt.%. The thermal conductivity of the LLDPE/W foam was 0.09 W/m.K, whereas the thermal conductivity of the neat LLDPE foam prepared under the same conditions was 0.06 W/m.K, which caused a higher porosity of approximately 92 vol.%. The FPCM absorbed or released approximately 22–23 J/g during melting or cooling, respectively, and the material was stable under thermal and mechanical cycling. More... »

PAGES

47-54

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s42247-018-0003-3

DOI

http://dx.doi.org/10.1007/s42247-018-0003-3

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1106279269


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Qatar University", 
          "id": "https://www.grid.ac/institutes/grid.412603.2", 
          "name": [
            "Center for Advanced Materials, Qatar University, P. O. Box 2713, Doha, Qatar"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Popelka", 
        "givenName": "Anton", 
        "id": "sg:person.01275306743.00", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01275306743.00"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Qatar University", 
          "id": "https://www.grid.ac/institutes/grid.412603.2", 
          "name": [
            "Center for Advanced Materials, Qatar University, P. O. Box 2713, Doha, Qatar"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Sobol\u010diak", 
        "givenName": "Patrik", 
        "id": "sg:person.01061126402.64", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01061126402.64"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Tomas Bata University in Zl\u00edn", 
          "id": "https://www.grid.ac/institutes/grid.21678.3a", 
          "name": [
            "Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin, Trida T. Bati 5678, 760 01, Zlin, Czech Republic"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Mrl\u00edk", 
        "givenName": "Miroslav", 
        "id": "sg:person.01301457657.88", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01301457657.88"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Polymer Institute", 
          "id": "https://www.grid.ac/institutes/grid.429924.0", 
          "name": [
            "Polymer Institute, Slovak Academy of Sciences, Dubravska cesta 9, 845 41, Bratislava 45, Slovakia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Nogellova", 
        "givenName": "Zuzana", 
        "id": "sg:person.0612174031.63", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0612174031.63"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Polymer Institute", 
          "id": "https://www.grid.ac/institutes/grid.429924.0", 
          "name": [
            "Polymer Institute, Slovak Academy of Sciences, Dubravska cesta 9, 845 41, Bratislava 45, Slovakia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Chod\u00e1k", 
        "givenName": "Ivan", 
        "id": "sg:person.0666131243.47", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0666131243.47"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Qatar Petroleum (Qatar)", 
          "id": "https://www.grid.ac/institutes/grid.468088.a", 
          "name": [
            "Qatar Petrochemical Company (QAPCO), 756, Doha, Qatar"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Ouederni", 
        "givenName": "Mabrouk", 
        "id": "sg:person.013672332403.50", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013672332403.50"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Qatar University", 
          "id": "https://www.grid.ac/institutes/grid.412603.2", 
          "name": [
            "Center for Advanced Materials, Qatar University, P. O. Box 2713, Doha, Qatar"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Al-Maadeed", 
        "givenName": "Mariam A.", 
        "id": "sg:person.015234432523.13", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015234432523.13"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Qatar University", 
          "id": "https://www.grid.ac/institutes/grid.412603.2", 
          "name": [
            "QAPCO Polymer Chair, Center for Advanced Materials, Qatar University, P. O. Box 2713, Doha, Qatar"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Krupa", 
        "givenName": "Igor", 
        "id": "sg:person.01267464731.85", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01267464731.85"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/s10853-010-4529-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000282699", 
          "https://doi.org/10.1007/s10853-010-4529-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10853-010-4529-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000282699", 
          "https://doi.org/10.1007/s10853-010-4529-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.enconman.2012.12.015", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1001205267"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.tca.2008.03.006", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003241749"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0141-3910(00)00097-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1004252971"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.tca.2006.02.008", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005413704"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.tca.2006.12.024", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007892495"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.rser.2012.10.034", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007970536"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10853-009-3418-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007996509", 
          "https://doi.org/10.1007/s10853-009-3418-7"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/978-94-011-1256-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1013152750", 
          "https://doi.org/10.1007/978-94-011-1256-7"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/978-94-011-1256-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1013152750", 
          "https://doi.org/10.1007/978-94-011-1256-7"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.tca.2004.11.025", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014284575"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0196-8904(03)00131-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1015216096"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0196-8904(03)00131-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1015216096"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.solener.2014.05.001", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1019202225"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s002310050126", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1020029150", 
          "https://doi.org/10.1007/s002310050126"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0196-8904(98)00025-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1020896480"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/app.38226", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026706931"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.polymertesting.2006.05.014", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027056719"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.eurpolymj.2007.08.022", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027433564"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0032-3861(01)00172-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032255798"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.enconman.2003.10.022", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035444012"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.rser.2006.05.005", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036062742"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/pen.21464", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036965589"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/pen.21464", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036965589"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.enbuild.2014.10.075", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038403123"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0927-0248(00)00041-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1040794955"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/app.20578", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1040861885"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.matchemphys.2004.06.043", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042572082"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1359-4311(02)00192-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1044929489"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1359-4311(02)00192-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1044929489"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.eurpolymj.2013.09.027", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1046098923"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10853-010-4824-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1046256283", 
          "https://doi.org/10.1007/s10853-010-4824-6"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10853-010-4824-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1046256283", 
          "https://doi.org/10.1007/s10853-010-4824-6"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0079-6700(98)00006-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052124131"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.polymertesting.2017.04.011", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1084534131"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2018-06", 
    "datePublishedReg": "2018-06-01", 
    "description": "Foamy phase-change materials (FPCMs) based on linear low-density polyethylene (LLDPE) blended with 30 wt.% of paraffin wax (W) were successfully prepared for the first time. The advantage of these materials is their double functionality. First, they serve as standard thermal insulators, and second, the paraffin wax acts as a phase change component that absorbs thermal energy (the latent heat) during melting if the temperature increases above its melting point, which ensures better heat protection of buildings, for instance, against overheating. The density of the porous fabricated FPCM was 0.2898 g/cm3 with pore content 69 vol.% and gel portion achieved 27.5 wt.%. The thermal conductivity of the LLDPE/W foam was 0.09 W/m.K, whereas the thermal conductivity of the neat LLDPE foam prepared under the same conditions was 0.06 W/m.K, which caused a higher porosity of approximately 92 vol.%. The FPCM absorbed or released approximately 22\u201323 J/g during melting or cooling, respectively, and the material was stable under thermal and mechanical cycling.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s42247-018-0003-3", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": true, 
    "isFundedItemOf": [
      {
        "id": "sg:grant.4187004", 
        "type": "MonetaryGrant"
      }
    ], 
    "isPartOf": [
      {
        "id": "sg:journal.1320448", 
        "issn": [
          "2522-5731", 
          "2522-574X"
        ], 
        "name": "Emergent Materials", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "1-2", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "1"
      }
    ], 
    "name": "Foamy phase change materials based on linear low-density polyethylene and paraffin wax blends", 
    "pagination": "47-54", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "aac67f7d5f3bde0428a6bb755ffef1c7241db193ae1eea25e4066f596a8fd9ed"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s42247-018-0003-3"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1106279269"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s42247-018-0003-3", 
      "https://app.dimensions.ai/details/publication/pub.1106279269"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-10T15:06", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8663_00000541.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://link.springer.com/10.1007%2Fs42247-018-0003-3"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s42247-018-0003-3'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s42247-018-0003-3'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s42247-018-0003-3'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s42247-018-0003-3'


 

This table displays all metadata directly associated to this object as RDF triples.

217 TRIPLES      21 PREDICATES      57 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s42247-018-0003-3 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author N71569c15921b46ebaa1281e0b8a2729d
4 schema:citation sg:pub.10.1007/978-94-011-1256-7
5 sg:pub.10.1007/s002310050126
6 sg:pub.10.1007/s10853-009-3418-7
7 sg:pub.10.1007/s10853-010-4529-x
8 sg:pub.10.1007/s10853-010-4824-6
9 https://doi.org/10.1002/app.20578
10 https://doi.org/10.1002/app.38226
11 https://doi.org/10.1002/pen.21464
12 https://doi.org/10.1016/j.enbuild.2014.10.075
13 https://doi.org/10.1016/j.enconman.2003.10.022
14 https://doi.org/10.1016/j.enconman.2012.12.015
15 https://doi.org/10.1016/j.eurpolymj.2007.08.022
16 https://doi.org/10.1016/j.eurpolymj.2013.09.027
17 https://doi.org/10.1016/j.matchemphys.2004.06.043
18 https://doi.org/10.1016/j.polymertesting.2006.05.014
19 https://doi.org/10.1016/j.polymertesting.2017.04.011
20 https://doi.org/10.1016/j.rser.2006.05.005
21 https://doi.org/10.1016/j.rser.2012.10.034
22 https://doi.org/10.1016/j.solener.2014.05.001
23 https://doi.org/10.1016/j.tca.2004.11.025
24 https://doi.org/10.1016/j.tca.2006.02.008
25 https://doi.org/10.1016/j.tca.2006.12.024
26 https://doi.org/10.1016/j.tca.2008.03.006
27 https://doi.org/10.1016/s0032-3861(01)00172-0
28 https://doi.org/10.1016/s0079-6700(98)00006-9
29 https://doi.org/10.1016/s0141-3910(00)00097-5
30 https://doi.org/10.1016/s0196-8904(03)00131-6
31 https://doi.org/10.1016/s0196-8904(98)00025-9
32 https://doi.org/10.1016/s0927-0248(00)00041-6
33 https://doi.org/10.1016/s1359-4311(02)00192-8
34 schema:datePublished 2018-06
35 schema:datePublishedReg 2018-06-01
36 schema:description Foamy phase-change materials (FPCMs) based on linear low-density polyethylene (LLDPE) blended with 30 wt.% of paraffin wax (W) were successfully prepared for the first time. The advantage of these materials is their double functionality. First, they serve as standard thermal insulators, and second, the paraffin wax acts as a phase change component that absorbs thermal energy (the latent heat) during melting if the temperature increases above its melting point, which ensures better heat protection of buildings, for instance, against overheating. The density of the porous fabricated FPCM was 0.2898 g/cm3 with pore content 69 vol.% and gel portion achieved 27.5 wt.%. The thermal conductivity of the LLDPE/W foam was 0.09 W/m.K, whereas the thermal conductivity of the neat LLDPE foam prepared under the same conditions was 0.06 W/m.K, which caused a higher porosity of approximately 92 vol.%. The FPCM absorbed or released approximately 22–23 J/g during melting or cooling, respectively, and the material was stable under thermal and mechanical cycling.
37 schema:genre research_article
38 schema:inLanguage en
39 schema:isAccessibleForFree true
40 schema:isPartOf N17cd7a8bdcdf40459e5ca0366b3201cf
41 N5de5c46bc8974a049e64e110cb198ff5
42 sg:journal.1320448
43 schema:name Foamy phase change materials based on linear low-density polyethylene and paraffin wax blends
44 schema:pagination 47-54
45 schema:productId N42d6371bd7314928a78b723643dc2113
46 Nad25921090b9459094d57e485b356834
47 Neea7aaf9f8704217b7e83601a06bfb57
48 schema:sameAs https://app.dimensions.ai/details/publication/pub.1106279269
49 https://doi.org/10.1007/s42247-018-0003-3
50 schema:sdDatePublished 2019-04-10T15:06
51 schema:sdLicense https://scigraph.springernature.com/explorer/license/
52 schema:sdPublisher Nc820bb51b4404405a250702fe5b1f23d
53 schema:url https://link.springer.com/10.1007%2Fs42247-018-0003-3
54 sgo:license sg:explorer/license/
55 sgo:sdDataset articles
56 rdf:type schema:ScholarlyArticle
57 N17cd7a8bdcdf40459e5ca0366b3201cf schema:volumeNumber 1
58 rdf:type schema:PublicationVolume
59 N42d6371bd7314928a78b723643dc2113 schema:name dimensions_id
60 schema:value pub.1106279269
61 rdf:type schema:PropertyValue
62 N55d1af4b86004d789ffe6d6a7f9e8f57 rdf:first sg:person.01061126402.64
63 rdf:rest Na63b138d24064a09bf2554a7e3e92808
64 N5de5c46bc8974a049e64e110cb198ff5 schema:issueNumber 1-2
65 rdf:type schema:PublicationIssue
66 N6343035c6a9244f6997cf8c88062c336 rdf:first sg:person.0612174031.63
67 rdf:rest Nfbf0572a041a4953812e01b557d5a345
68 N71569c15921b46ebaa1281e0b8a2729d rdf:first sg:person.01275306743.00
69 rdf:rest N55d1af4b86004d789ffe6d6a7f9e8f57
70 Na63b138d24064a09bf2554a7e3e92808 rdf:first sg:person.01301457657.88
71 rdf:rest N6343035c6a9244f6997cf8c88062c336
72 Nad25921090b9459094d57e485b356834 schema:name doi
73 schema:value 10.1007/s42247-018-0003-3
74 rdf:type schema:PropertyValue
75 Nb4bd478d079f4a4ab9055d2e4c369181 rdf:first sg:person.015234432523.13
76 rdf:rest Nc9cad3046e0e474c8f26a0501dc8de44
77 Nc4a33f0e358e4d07b05987095ed835e1 rdf:first sg:person.013672332403.50
78 rdf:rest Nb4bd478d079f4a4ab9055d2e4c369181
79 Nc820bb51b4404405a250702fe5b1f23d schema:name Springer Nature - SN SciGraph project
80 rdf:type schema:Organization
81 Nc9cad3046e0e474c8f26a0501dc8de44 rdf:first sg:person.01267464731.85
82 rdf:rest rdf:nil
83 Neea7aaf9f8704217b7e83601a06bfb57 schema:name readcube_id
84 schema:value aac67f7d5f3bde0428a6bb755ffef1c7241db193ae1eea25e4066f596a8fd9ed
85 rdf:type schema:PropertyValue
86 Nfbf0572a041a4953812e01b557d5a345 rdf:first sg:person.0666131243.47
87 rdf:rest Nc4a33f0e358e4d07b05987095ed835e1
88 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
89 schema:name Engineering
90 rdf:type schema:DefinedTerm
91 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
92 schema:name Materials Engineering
93 rdf:type schema:DefinedTerm
94 sg:grant.4187004 http://pending.schema.org/fundedItem sg:pub.10.1007/s42247-018-0003-3
95 rdf:type schema:MonetaryGrant
96 sg:journal.1320448 schema:issn 2522-5731
97 2522-574X
98 schema:name Emergent Materials
99 rdf:type schema:Periodical
100 sg:person.01061126402.64 schema:affiliation https://www.grid.ac/institutes/grid.412603.2
101 schema:familyName Sobolčiak
102 schema:givenName Patrik
103 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01061126402.64
104 rdf:type schema:Person
105 sg:person.01267464731.85 schema:affiliation https://www.grid.ac/institutes/grid.412603.2
106 schema:familyName Krupa
107 schema:givenName Igor
108 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01267464731.85
109 rdf:type schema:Person
110 sg:person.01275306743.00 schema:affiliation https://www.grid.ac/institutes/grid.412603.2
111 schema:familyName Popelka
112 schema:givenName Anton
113 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01275306743.00
114 rdf:type schema:Person
115 sg:person.01301457657.88 schema:affiliation https://www.grid.ac/institutes/grid.21678.3a
116 schema:familyName Mrlík
117 schema:givenName Miroslav
118 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01301457657.88
119 rdf:type schema:Person
120 sg:person.013672332403.50 schema:affiliation https://www.grid.ac/institutes/grid.468088.a
121 schema:familyName Ouederni
122 schema:givenName Mabrouk
123 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013672332403.50
124 rdf:type schema:Person
125 sg:person.015234432523.13 schema:affiliation https://www.grid.ac/institutes/grid.412603.2
126 schema:familyName Al-Maadeed
127 schema:givenName Mariam A.
128 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015234432523.13
129 rdf:type schema:Person
130 sg:person.0612174031.63 schema:affiliation https://www.grid.ac/institutes/grid.429924.0
131 schema:familyName Nogellova
132 schema:givenName Zuzana
133 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0612174031.63
134 rdf:type schema:Person
135 sg:person.0666131243.47 schema:affiliation https://www.grid.ac/institutes/grid.429924.0
136 schema:familyName Chodák
137 schema:givenName Ivan
138 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0666131243.47
139 rdf:type schema:Person
140 sg:pub.10.1007/978-94-011-1256-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013152750
141 https://doi.org/10.1007/978-94-011-1256-7
142 rdf:type schema:CreativeWork
143 sg:pub.10.1007/s002310050126 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020029150
144 https://doi.org/10.1007/s002310050126
145 rdf:type schema:CreativeWork
146 sg:pub.10.1007/s10853-009-3418-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007996509
147 https://doi.org/10.1007/s10853-009-3418-7
148 rdf:type schema:CreativeWork
149 sg:pub.10.1007/s10853-010-4529-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1000282699
150 https://doi.org/10.1007/s10853-010-4529-x
151 rdf:type schema:CreativeWork
152 sg:pub.10.1007/s10853-010-4824-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046256283
153 https://doi.org/10.1007/s10853-010-4824-6
154 rdf:type schema:CreativeWork
155 https://doi.org/10.1002/app.20578 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040861885
156 rdf:type schema:CreativeWork
157 https://doi.org/10.1002/app.38226 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026706931
158 rdf:type schema:CreativeWork
159 https://doi.org/10.1002/pen.21464 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036965589
160 rdf:type schema:CreativeWork
161 https://doi.org/10.1016/j.enbuild.2014.10.075 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038403123
162 rdf:type schema:CreativeWork
163 https://doi.org/10.1016/j.enconman.2003.10.022 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035444012
164 rdf:type schema:CreativeWork
165 https://doi.org/10.1016/j.enconman.2012.12.015 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001205267
166 rdf:type schema:CreativeWork
167 https://doi.org/10.1016/j.eurpolymj.2007.08.022 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027433564
168 rdf:type schema:CreativeWork
169 https://doi.org/10.1016/j.eurpolymj.2013.09.027 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046098923
170 rdf:type schema:CreativeWork
171 https://doi.org/10.1016/j.matchemphys.2004.06.043 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042572082
172 rdf:type schema:CreativeWork
173 https://doi.org/10.1016/j.polymertesting.2006.05.014 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027056719
174 rdf:type schema:CreativeWork
175 https://doi.org/10.1016/j.polymertesting.2017.04.011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084534131
176 rdf:type schema:CreativeWork
177 https://doi.org/10.1016/j.rser.2006.05.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036062742
178 rdf:type schema:CreativeWork
179 https://doi.org/10.1016/j.rser.2012.10.034 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007970536
180 rdf:type schema:CreativeWork
181 https://doi.org/10.1016/j.solener.2014.05.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019202225
182 rdf:type schema:CreativeWork
183 https://doi.org/10.1016/j.tca.2004.11.025 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014284575
184 rdf:type schema:CreativeWork
185 https://doi.org/10.1016/j.tca.2006.02.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005413704
186 rdf:type schema:CreativeWork
187 https://doi.org/10.1016/j.tca.2006.12.024 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007892495
188 rdf:type schema:CreativeWork
189 https://doi.org/10.1016/j.tca.2008.03.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003241749
190 rdf:type schema:CreativeWork
191 https://doi.org/10.1016/s0032-3861(01)00172-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032255798
192 rdf:type schema:CreativeWork
193 https://doi.org/10.1016/s0079-6700(98)00006-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052124131
194 rdf:type schema:CreativeWork
195 https://doi.org/10.1016/s0141-3910(00)00097-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004252971
196 rdf:type schema:CreativeWork
197 https://doi.org/10.1016/s0196-8904(03)00131-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015216096
198 rdf:type schema:CreativeWork
199 https://doi.org/10.1016/s0196-8904(98)00025-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020896480
200 rdf:type schema:CreativeWork
201 https://doi.org/10.1016/s0927-0248(00)00041-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040794955
202 rdf:type schema:CreativeWork
203 https://doi.org/10.1016/s1359-4311(02)00192-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044929489
204 rdf:type schema:CreativeWork
205 https://www.grid.ac/institutes/grid.21678.3a schema:alternateName Tomas Bata University in Zlín
206 schema:name Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin, Trida T. Bati 5678, 760 01, Zlin, Czech Republic
207 rdf:type schema:Organization
208 https://www.grid.ac/institutes/grid.412603.2 schema:alternateName Qatar University
209 schema:name Center for Advanced Materials, Qatar University, P. O. Box 2713, Doha, Qatar
210 QAPCO Polymer Chair, Center for Advanced Materials, Qatar University, P. O. Box 2713, Doha, Qatar
211 rdf:type schema:Organization
212 https://www.grid.ac/institutes/grid.429924.0 schema:alternateName Polymer Institute
213 schema:name Polymer Institute, Slovak Academy of Sciences, Dubravska cesta 9, 845 41, Bratislava 45, Slovakia
214 rdf:type schema:Organization
215 https://www.grid.ac/institutes/grid.468088.a schema:alternateName Qatar Petroleum (Qatar)
216 schema:name Qatar Petrochemical Company (QAPCO), 756, Doha, Qatar
217 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...