Heat Treatment and Lubrication Analysis of the Surface Integrity of Cold Extruded Metals View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2019-03-01

AUTHORS

Thiago Luiz Lara Oliveira, Frederico Ozanan Neves, Thalita Cristina De Paula, Antonio Carlos Ancelotti Junior

ABSTRACT

Cold forming is a process which is largely employed in industry. Thisprocess may have impacts on mechanical properties and surface integrity. This paper presents a study on Surface Integrity (SI) within the context of cold extruded billets with two different materials, steel and aluminium alloys. Different lubricant oils were used in this study, and heat treatment was employed after cold processing. Typical surface alterations such as micro-hardness and roughness were analysed, and a FEM analysis was used to predict the areas with increasing hardness. An analysis of test variance (ANOVA) was conducted, aiming to determine the influence factors of the experiments. Thus, influence factors like oil performance and extrusion load were investigated. The performance and influence of oils on cold extrusion processing for different materials were analysed. Due to the effects of lubricants on surface integrity in terms of hardness and roughness, a comparison was given with projections forsubstituting mineral oils for vegetable oils without losing functional performance. More... »

PAGES

1-8

References to SciGraph publications

  • 2016-07. Influence of micro-pits indentation and palm based-oil on taper die sliding contact surface in cold extrusion process in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • 2006-03. Recent advances in the meshless simulation of aluminium extrusion and other related forming processes in ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING
  • 2012-07. Friction and wear of self-mated SiC and Si3N4 in green water-based lubricant in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • 2010. Surface Integrity – Definition and Importance in Functional Performance in SURFACE INTEGRITY IN MACHINING
  • 2012-01. Experimental evaluation on the tribological properties of coconut oil by the addition of CuO nanoparticles in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s40684-019-00091-8

    DOI

    http://dx.doi.org/10.1007/s40684-019-00091-8

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1112472504


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Federal University of S\u00e3o Jo\u00e3o del-Rei", 
              "id": "https://www.grid.ac/institutes/grid.428481.3", 
              "name": [
                "Departamento de Engenharia Mec\u00e2nica, Universidade Federal de S\u00e3o Jo\u00e3o del Rei, Pra\u00e7a Frei Orlando, 170-Centro, 36307-334, S\u00e3o Jo\u00e3o Del Rei, MG, Brazil"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Luiz Lara Oliveira", 
            "givenName": "Thiago", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Federal University of S\u00e3o Jo\u00e3o del-Rei", 
              "id": "https://www.grid.ac/institutes/grid.428481.3", 
              "name": [
                "Departamento de Engenharia Mec\u00e2nica, Universidade Federal de S\u00e3o Jo\u00e3o del Rei, Pra\u00e7a Frei Orlando, 170-Centro, 36307-334, S\u00e3o Jo\u00e3o Del Rei, MG, Brazil"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Neves", 
            "givenName": "Frederico Ozanan", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Federal University of S\u00e3o Jo\u00e3o del-Rei", 
              "id": "https://www.grid.ac/institutes/grid.428481.3", 
              "name": [
                "Departamento de Engenharia Mec\u00e2nica, Universidade Federal de S\u00e3o Jo\u00e3o del Rei, Pra\u00e7a Frei Orlando, 170-Centro, 36307-334, S\u00e3o Jo\u00e3o Del Rei, MG, Brazil"
              ], 
              "type": "Organization"
            }, 
            "familyName": "De Paula", 
            "givenName": "Thalita Cristina", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Federal University of Itajub\u00e1", 
              "id": "https://www.grid.ac/institutes/grid.440561.2", 
              "name": [
                "Instituto de Engenharia Mec\u00e2nica, Universidade Federal de Itajub\u00e1, Av. B P S, 1303-Pinheirinho, 37500 903, Itajub\u00e1, MG, Brazil"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ancelotti Junior", 
            "givenName": "Antonio Carlos", 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/s0045-6535(00)00328-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006720807"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-012-0015-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008180046", 
              "https://doi.org/10.1007/s12541-012-0015-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.proeng.2014.10.250", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010822688"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-012-0139-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012639740", 
              "https://doi.org/10.1007/s12541-012-0139-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0926-860x(01)00891-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013068880"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02905930", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023423932", 
              "https://doi.org/10.1007/bf02905930"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02905930", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023423932", 
              "https://doi.org/10.1007/bf02905930"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.triboint.2015.04.021", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028249874"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-016-0112-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045301151", 
              "https://doi.org/10.1007/s12541-016-0112-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-016-0112-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045301151", 
              "https://doi.org/10.1007/s12541-016-0112-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2005.11.013", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1046668448"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0142-1123(03)00127-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047373464"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0142-1123(03)00127-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047373464"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/10402004.2011.648826", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048541186"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actamat.2008.08.029", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051668406"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-1-84882-874-2_1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052659316", 
              "https://doi.org/10.1007/978-1-84882-874-2_1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-1-84882-874-2_1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052659316", 
              "https://doi.org/10.1007/978-1-84882-874-2_1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msea.2011.03.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053443647"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.11113/jt.v66.2692", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062046847"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1504/ijmmm.2008.020909", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1067475462"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1504/ijmmm.2008.020961", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1067475469"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/1350650117712344", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085642610"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/1350650117712344", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085642610"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2019-03-01", 
        "datePublishedReg": "2019-03-01", 
        "description": "Cold forming is a process which is largely employed in industry. Thisprocess may have impacts on mechanical properties and surface integrity. This paper presents a study on Surface Integrity (SI) within the context of cold extruded billets with two different materials, steel and aluminium alloys. Different lubricant oils were used in this study, and heat treatment was employed after cold processing. Typical surface alterations such as micro-hardness and roughness were analysed, and a FEM analysis was used to predict the areas with increasing hardness. An analysis of test variance (ANOVA) was conducted, aiming to determine the influence factors of the experiments. Thus, influence factors like oil performance and extrusion load were investigated. The performance and influence of oils on cold extrusion processing for different materials were analysed. Due to the effects of lubricants on surface integrity in terms of hardness and roughness, a comparison was given with projections forsubstituting mineral oils for vegetable oils without losing functional performance.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s40684-019-00091-8", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136729", 
            "issn": [
              "2288-6206", 
              "2198-0810"
            ], 
            "name": "International Journal of Precision Engineering and Manufacturing-Green Technology", 
            "type": "Periodical"
          }
        ], 
        "name": "Heat Treatment and Lubrication Analysis of the Surface Integrity of Cold Extruded Metals", 
        "pagination": "1-8", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "a5edaeee07a4fdd680e46dec205ac38d80b2967d835f597b093d1cd41ecddb09"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s40684-019-00091-8"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1112472504"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s40684-019-00091-8", 
          "https://app.dimensions.ai/details/publication/pub.1112472504"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T10:34", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000349_0000000349/records_113661_00000005.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://link.springer.com/10.1007%2Fs40684-019-00091-8"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00091-8'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00091-8'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00091-8'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00091-8'


     

    This table displays all metadata directly associated to this object as RDF triples.

    134 TRIPLES      21 PREDICATES      42 URIs      16 LITERALS      5 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s40684-019-00091-8 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author Nef7b5bf992fa4b519c70fc41ba814358
    4 schema:citation sg:pub.10.1007/978-1-84882-874-2_1
    5 sg:pub.10.1007/bf02905930
    6 sg:pub.10.1007/s12541-012-0015-5
    7 sg:pub.10.1007/s12541-012-0139-7
    8 sg:pub.10.1007/s12541-016-0112-y
    9 https://doi.org/10.1016/j.actamat.2008.08.029
    10 https://doi.org/10.1016/j.ijmachtools.2005.11.013
    11 https://doi.org/10.1016/j.msea.2011.03.004
    12 https://doi.org/10.1016/j.proeng.2014.10.250
    13 https://doi.org/10.1016/j.triboint.2015.04.021
    14 https://doi.org/10.1016/s0045-6535(00)00328-3
    15 https://doi.org/10.1016/s0142-1123(03)00127-0
    16 https://doi.org/10.1016/s0926-860x(01)00891-2
    17 https://doi.org/10.1080/10402004.2011.648826
    18 https://doi.org/10.11113/jt.v66.2692
    19 https://doi.org/10.1177/1350650117712344
    20 https://doi.org/10.1504/ijmmm.2008.020909
    21 https://doi.org/10.1504/ijmmm.2008.020961
    22 schema:datePublished 2019-03-01
    23 schema:datePublishedReg 2019-03-01
    24 schema:description Cold forming is a process which is largely employed in industry. Thisprocess may have impacts on mechanical properties and surface integrity. This paper presents a study on Surface Integrity (SI) within the context of cold extruded billets with two different materials, steel and aluminium alloys. Different lubricant oils were used in this study, and heat treatment was employed after cold processing. Typical surface alterations such as micro-hardness and roughness were analysed, and a FEM analysis was used to predict the areas with increasing hardness. An analysis of test variance (ANOVA) was conducted, aiming to determine the influence factors of the experiments. Thus, influence factors like oil performance and extrusion load were investigated. The performance and influence of oils on cold extrusion processing for different materials were analysed. Due to the effects of lubricants on surface integrity in terms of hardness and roughness, a comparison was given with projections forsubstituting mineral oils for vegetable oils without losing functional performance.
    25 schema:genre research_article
    26 schema:inLanguage en
    27 schema:isAccessibleForFree false
    28 schema:isPartOf sg:journal.1136729
    29 schema:name Heat Treatment and Lubrication Analysis of the Surface Integrity of Cold Extruded Metals
    30 schema:pagination 1-8
    31 schema:productId N541d258ff1444d66859a3fafa157a4f7
    32 N65c876396cfe444983637fe1db7434b0
    33 Nc9633778bf7b4c3684d55b4ac9327e1a
    34 schema:sameAs https://app.dimensions.ai/details/publication/pub.1112472504
    35 https://doi.org/10.1007/s40684-019-00091-8
    36 schema:sdDatePublished 2019-04-11T10:34
    37 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    38 schema:sdPublisher N043d6e51af9246daaa65683ca82b58ef
    39 schema:url https://link.springer.com/10.1007%2Fs40684-019-00091-8
    40 sgo:license sg:explorer/license/
    41 sgo:sdDataset articles
    42 rdf:type schema:ScholarlyArticle
    43 N043d6e51af9246daaa65683ca82b58ef schema:name Springer Nature - SN SciGraph project
    44 rdf:type schema:Organization
    45 N2937a24b79ca48e1b55a6966c2c7e242 rdf:first N69de949fea6c4853aa33b70336716670
    46 rdf:rest N4e7760e4fa6b48718516052595aad8ba
    47 N46e4066edf6d45f19ab5816e2ae2e949 schema:affiliation https://www.grid.ac/institutes/grid.428481.3
    48 schema:familyName Neves
    49 schema:givenName Frederico Ozanan
    50 rdf:type schema:Person
    51 N4e7760e4fa6b48718516052595aad8ba rdf:first N5dc63de387a14d1ba041e2a1fff861da
    52 rdf:rest rdf:nil
    53 N541d258ff1444d66859a3fafa157a4f7 schema:name dimensions_id
    54 schema:value pub.1112472504
    55 rdf:type schema:PropertyValue
    56 N5dc63de387a14d1ba041e2a1fff861da schema:affiliation https://www.grid.ac/institutes/grid.440561.2
    57 schema:familyName Ancelotti Junior
    58 schema:givenName Antonio Carlos
    59 rdf:type schema:Person
    60 N65c876396cfe444983637fe1db7434b0 schema:name readcube_id
    61 schema:value a5edaeee07a4fdd680e46dec205ac38d80b2967d835f597b093d1cd41ecddb09
    62 rdf:type schema:PropertyValue
    63 N69de949fea6c4853aa33b70336716670 schema:affiliation https://www.grid.ac/institutes/grid.428481.3
    64 schema:familyName De Paula
    65 schema:givenName Thalita Cristina
    66 rdf:type schema:Person
    67 Nc9633778bf7b4c3684d55b4ac9327e1a schema:name doi
    68 schema:value 10.1007/s40684-019-00091-8
    69 rdf:type schema:PropertyValue
    70 Nd6784050efa045a98d67536e8c079a05 rdf:first N46e4066edf6d45f19ab5816e2ae2e949
    71 rdf:rest N2937a24b79ca48e1b55a6966c2c7e242
    72 Nef7b5bf992fa4b519c70fc41ba814358 rdf:first Nf1d7240837154efea60b2570f9acf751
    73 rdf:rest Nd6784050efa045a98d67536e8c079a05
    74 Nf1d7240837154efea60b2570f9acf751 schema:affiliation https://www.grid.ac/institutes/grid.428481.3
    75 schema:familyName Luiz Lara Oliveira
    76 schema:givenName Thiago
    77 rdf:type schema:Person
    78 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    79 schema:name Engineering
    80 rdf:type schema:DefinedTerm
    81 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    82 schema:name Materials Engineering
    83 rdf:type schema:DefinedTerm
    84 sg:journal.1136729 schema:issn 2198-0810
    85 2288-6206
    86 schema:name International Journal of Precision Engineering and Manufacturing-Green Technology
    87 rdf:type schema:Periodical
    88 sg:pub.10.1007/978-1-84882-874-2_1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052659316
    89 https://doi.org/10.1007/978-1-84882-874-2_1
    90 rdf:type schema:CreativeWork
    91 sg:pub.10.1007/bf02905930 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023423932
    92 https://doi.org/10.1007/bf02905930
    93 rdf:type schema:CreativeWork
    94 sg:pub.10.1007/s12541-012-0015-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008180046
    95 https://doi.org/10.1007/s12541-012-0015-5
    96 rdf:type schema:CreativeWork
    97 sg:pub.10.1007/s12541-012-0139-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012639740
    98 https://doi.org/10.1007/s12541-012-0139-7
    99 rdf:type schema:CreativeWork
    100 sg:pub.10.1007/s12541-016-0112-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1045301151
    101 https://doi.org/10.1007/s12541-016-0112-y
    102 rdf:type schema:CreativeWork
    103 https://doi.org/10.1016/j.actamat.2008.08.029 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051668406
    104 rdf:type schema:CreativeWork
    105 https://doi.org/10.1016/j.ijmachtools.2005.11.013 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046668448
    106 rdf:type schema:CreativeWork
    107 https://doi.org/10.1016/j.msea.2011.03.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053443647
    108 rdf:type schema:CreativeWork
    109 https://doi.org/10.1016/j.proeng.2014.10.250 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010822688
    110 rdf:type schema:CreativeWork
    111 https://doi.org/10.1016/j.triboint.2015.04.021 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028249874
    112 rdf:type schema:CreativeWork
    113 https://doi.org/10.1016/s0045-6535(00)00328-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006720807
    114 rdf:type schema:CreativeWork
    115 https://doi.org/10.1016/s0142-1123(03)00127-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047373464
    116 rdf:type schema:CreativeWork
    117 https://doi.org/10.1016/s0926-860x(01)00891-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013068880
    118 rdf:type schema:CreativeWork
    119 https://doi.org/10.1080/10402004.2011.648826 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048541186
    120 rdf:type schema:CreativeWork
    121 https://doi.org/10.11113/jt.v66.2692 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062046847
    122 rdf:type schema:CreativeWork
    123 https://doi.org/10.1177/1350650117712344 schema:sameAs https://app.dimensions.ai/details/publication/pub.1085642610
    124 rdf:type schema:CreativeWork
    125 https://doi.org/10.1504/ijmmm.2008.020909 schema:sameAs https://app.dimensions.ai/details/publication/pub.1067475462
    126 rdf:type schema:CreativeWork
    127 https://doi.org/10.1504/ijmmm.2008.020961 schema:sameAs https://app.dimensions.ai/details/publication/pub.1067475469
    128 rdf:type schema:CreativeWork
    129 https://www.grid.ac/institutes/grid.428481.3 schema:alternateName Federal University of São João del-Rei
    130 schema:name Departamento de Engenharia Mecânica, Universidade Federal de São João del Rei, Praça Frei Orlando, 170-Centro, 36307-334, São João Del Rei, MG, Brazil
    131 rdf:type schema:Organization
    132 https://www.grid.ac/institutes/grid.440561.2 schema:alternateName Federal University of Itajubá
    133 schema:name Instituto de Engenharia Mecânica, Universidade Federal de Itajubá, Av. B P S, 1303-Pinheirinho, 37500 903, Itajubá, MG, Brazil
    134 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...