Hobbing Manufacturing of New Type of Involute-Helix Gears for Wind Turbine Gearbox View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2019-04

AUTHORS

Dong Liang, Bingkui Chen, Yane Gao

ABSTRACT

The involute gears are widely used in the gearbox for wind turbine. To satisfy the requirements of reduction of noise and increase of the endurance of the gear drive, the new type of involute-helix gears, which have the advantages of involute gears and circular arc gears, had been proposed. In this paper, the hobbing cutters of involute-helix gears are designed utilizing the normal section of convex and concave tooth profiles, respectively. Mathematical models of hobbing cutters are established and general products are also manufactured. Using the developed hobbing cutters, the proposed gear pair is manufactured based on the numerical control technology. Combining with the measure method of gear measuring center and the characteristic of the investigated gears, the method of error measurement of special tooth profiles is provided. The further development of special detection software for the gears will be carried out. The results will lay the foundations for the large-scale industrial practice and production applications of gear drive. More... »

PAGES

305-313

References to SciGraph publications

  • 2017-11. System dynamic modelling of three different wind turbine gearbox designs under transient loading conditions in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • 2016-03. Nonlinear vibration of the bevel gear with teeth profile modification in NONLINEAR DYNAMICS
  • 2009-03. CAD-based simulation of the hobbing process for the manufacturing of spur and helical gears in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-08. High Precision Reducers for Industrial Robots Driving 4th Industrial Revolution: State of Arts, Analysis, Design, Performance Evaluation and Perspective in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
  • 2017-10. Design and manufacture of small-scale wind turbine simulator to emulate torque response of MW wind turbine in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
  • 2016-01. Effects of bearing characteristics on load distribution and sharing of pitch reducer for wind turbine in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
  • 2015-09. Theoretical and experimental investigations on parallel-axis gear transmission with tubular meshing surfaces in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • 2015-01. Design of rotor profile of internal gear pump for improving fuel efficiency in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • 2014-01. Sustainable production of helical pinion gears: Environmental effects and product quality in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
  • 2018-06. An Approximate Solution Method of Dynamic Reliability for Wind Turbine Gear Transmission with Parameters of Uncertain Distribution Type in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s40684-019-00087-4

    DOI

    http://dx.doi.org/10.1007/s40684-019-00087-4

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1112434943


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0102", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Applied Mathematics", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/01", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Mathematical Sciences", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Chongqing University", 
              "id": "https://www.grid.ac/institutes/grid.190737.b", 
              "name": [
                "School of Mechanotronics & Vehicle Engineering, Chongqing Jiaotong University, No. 66 Xuefu Street, Nan\u2019an District, 400074, Chongqing, China", 
                "The State Key Laboratory of Mechanical Transmission, Chongqing University, No. 174 Shazheng Street, Shapingba District, 400030, Chongqing, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Liang", 
            "givenName": "Dong", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Chongqing University", 
              "id": "https://www.grid.ac/institutes/grid.190737.b", 
              "name": [
                "The State Key Laboratory of Mechanical Transmission, Chongqing University, No. 174 Shazheng Street, Shapingba District, 400030, Chongqing, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Chen", 
            "givenName": "Bingkui", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Chongqing University", 
              "id": "https://www.grid.ac/institutes/grid.190737.b", 
              "name": [
                "The State Key Laboratory of Mechanical Transmission, Chongqing University, No. 174 Shazheng Street, Shapingba District, 400030, Chongqing, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Gao", 
            "givenName": "Yane", 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/j.finel.2010.12.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1011645990"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.mechmachtheory.2015.02.006", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013037210"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11071-015-2452-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013866640", 
              "https://doi.org/10.1007/s11071-015-2452-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.mechmachtheory.2016.03.010", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024193868"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40684-014-0006-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1026224375", 
              "https://doi.org/10.1007/s40684-014-0006-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-015-0277-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1026874071", 
              "https://doi.org/10.1007/s12541-015-0277-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.mechmachtheory.2014.03.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027933670"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.wear.2015.03.008", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1034286056"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-015-0014-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1034605556", 
              "https://doi.org/10.1007/s12541-015-0014-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-008-1465-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037397804", 
              "https://doi.org/10.1007/s00170-008-1465-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-008-1465-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037397804", 
              "https://doi.org/10.1007/s00170-008-1465-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40684-016-0008-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051882665", 
              "https://doi.org/10.1007/s40684-016-0008-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0954406213478869", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063884386"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0954406213478869", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063884386"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40684-017-0046-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1092113307", 
              "https://doi.org/10.1007/s40684-017-0046-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-017-0194-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1092615599", 
              "https://doi.org/10.1007/s12541-017-0194-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-018-0101-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1105310800", 
              "https://doi.org/10.1007/s12541-018-0101-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-018-0101-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1105310800", 
              "https://doi.org/10.1007/s12541-018-0101-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40684-018-0058-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1106287667", 
              "https://doi.org/10.1007/s40684-018-0058-x"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2019-04", 
        "datePublishedReg": "2019-04-01", 
        "description": "The involute gears are widely used in the gearbox for wind turbine. To satisfy the requirements of reduction of noise and increase of the endurance of the gear drive, the new type of involute-helix gears, which have the advantages of involute gears and circular arc gears, had been proposed. In this paper, the hobbing cutters of involute-helix gears are designed utilizing the normal section of convex and concave tooth profiles, respectively. Mathematical models of hobbing cutters are established and general products are also manufactured. Using the developed hobbing cutters, the proposed gear pair is manufactured based on the numerical control technology. Combining with the measure method of gear measuring center and the characteristic of the investigated gears, the method of error measurement of special tooth profiles is provided. The further development of special detection software for the gears will be carried out. The results will lay the foundations for the large-scale industrial practice and production applications of gear drive.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s40684-019-00087-4", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136729", 
            "issn": [
              "2288-6206", 
              "2198-0810"
            ], 
            "name": "International Journal of Precision Engineering and Manufacturing-Green Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "2", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "6"
          }
        ], 
        "name": "Hobbing Manufacturing of New Type of Involute-Helix Gears for Wind Turbine Gearbox", 
        "pagination": "305-313", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "389d1d28d750d2bf098f511d6f27249333838ddd5c43d06e0c3160fb02aca145"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s40684-019-00087-4"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1112434943"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s40684-019-00087-4", 
          "https://app.dimensions.ai/details/publication/pub.1112434943"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T14:03", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000371_0000000371/records_130831_00000006.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://link.springer.com/10.1007%2Fs40684-019-00087-4"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00087-4'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00087-4'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00087-4'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00087-4'


     

    This table displays all metadata directly associated to this object as RDF triples.

    131 TRIPLES      21 PREDICATES      43 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s40684-019-00087-4 schema:about anzsrc-for:01
    2 anzsrc-for:0102
    3 schema:author Nded6d6e80aaf4ccf951ec5a1c7c9ad3b
    4 schema:citation sg:pub.10.1007/s00170-008-1465-x
    5 sg:pub.10.1007/s11071-015-2452-z
    6 sg:pub.10.1007/s12541-015-0014-4
    7 sg:pub.10.1007/s12541-015-0277-9
    8 sg:pub.10.1007/s12541-017-0194-1
    9 sg:pub.10.1007/s12541-018-0101-4
    10 sg:pub.10.1007/s40684-014-0006-3
    11 sg:pub.10.1007/s40684-016-0008-4
    12 sg:pub.10.1007/s40684-017-0046-6
    13 sg:pub.10.1007/s40684-018-0058-x
    14 https://doi.org/10.1016/j.finel.2010.12.005
    15 https://doi.org/10.1016/j.mechmachtheory.2014.03.001
    16 https://doi.org/10.1016/j.mechmachtheory.2015.02.006
    17 https://doi.org/10.1016/j.mechmachtheory.2016.03.010
    18 https://doi.org/10.1016/j.wear.2015.03.008
    19 https://doi.org/10.1177/0954406213478869
    20 schema:datePublished 2019-04
    21 schema:datePublishedReg 2019-04-01
    22 schema:description The involute gears are widely used in the gearbox for wind turbine. To satisfy the requirements of reduction of noise and increase of the endurance of the gear drive, the new type of involute-helix gears, which have the advantages of involute gears and circular arc gears, had been proposed. In this paper, the hobbing cutters of involute-helix gears are designed utilizing the normal section of convex and concave tooth profiles, respectively. Mathematical models of hobbing cutters are established and general products are also manufactured. Using the developed hobbing cutters, the proposed gear pair is manufactured based on the numerical control technology. Combining with the measure method of gear measuring center and the characteristic of the investigated gears, the method of error measurement of special tooth profiles is provided. The further development of special detection software for the gears will be carried out. The results will lay the foundations for the large-scale industrial practice and production applications of gear drive.
    23 schema:genre research_article
    24 schema:inLanguage en
    25 schema:isAccessibleForFree false
    26 schema:isPartOf N04f75086f9c649ed9e921d88352fa19f
    27 N589c3f250728482bb270df1fd9383a51
    28 sg:journal.1136729
    29 schema:name Hobbing Manufacturing of New Type of Involute-Helix Gears for Wind Turbine Gearbox
    30 schema:pagination 305-313
    31 schema:productId N915ef40b099b46fe8ab50f8f8bdc985a
    32 N990b04dcc75c4a6c9f7503d49954105e
    33 Nbe5f39600dd043e982ffcd0e8dc83a19
    34 schema:sameAs https://app.dimensions.ai/details/publication/pub.1112434943
    35 https://doi.org/10.1007/s40684-019-00087-4
    36 schema:sdDatePublished 2019-04-11T14:03
    37 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    38 schema:sdPublisher N5f68c96c21eb46fb865fd73ab2475028
    39 schema:url https://link.springer.com/10.1007%2Fs40684-019-00087-4
    40 sgo:license sg:explorer/license/
    41 sgo:sdDataset articles
    42 rdf:type schema:ScholarlyArticle
    43 N04f75086f9c649ed9e921d88352fa19f schema:volumeNumber 6
    44 rdf:type schema:PublicationVolume
    45 N17b51e30b5f74458ae2b57a880bdef1e rdf:first N4d64b19691fe443dbf1233b34dc0f1ac
    46 rdf:rest rdf:nil
    47 N1ea7bf019b31464aa1d23e8f75976413 schema:affiliation https://www.grid.ac/institutes/grid.190737.b
    48 schema:familyName Chen
    49 schema:givenName Bingkui
    50 rdf:type schema:Person
    51 N425298133e314edcb021de8ecb9e8690 rdf:first N1ea7bf019b31464aa1d23e8f75976413
    52 rdf:rest N17b51e30b5f74458ae2b57a880bdef1e
    53 N4d64b19691fe443dbf1233b34dc0f1ac schema:affiliation https://www.grid.ac/institutes/grid.190737.b
    54 schema:familyName Gao
    55 schema:givenName Yane
    56 rdf:type schema:Person
    57 N589c3f250728482bb270df1fd9383a51 schema:issueNumber 2
    58 rdf:type schema:PublicationIssue
    59 N5f68c96c21eb46fb865fd73ab2475028 schema:name Springer Nature - SN SciGraph project
    60 rdf:type schema:Organization
    61 N915ef40b099b46fe8ab50f8f8bdc985a schema:name dimensions_id
    62 schema:value pub.1112434943
    63 rdf:type schema:PropertyValue
    64 N990b04dcc75c4a6c9f7503d49954105e schema:name doi
    65 schema:value 10.1007/s40684-019-00087-4
    66 rdf:type schema:PropertyValue
    67 Nbe5f39600dd043e982ffcd0e8dc83a19 schema:name readcube_id
    68 schema:value 389d1d28d750d2bf098f511d6f27249333838ddd5c43d06e0c3160fb02aca145
    69 rdf:type schema:PropertyValue
    70 Nd91fd6054bdf477491d613939beb9935 schema:affiliation https://www.grid.ac/institutes/grid.190737.b
    71 schema:familyName Liang
    72 schema:givenName Dong
    73 rdf:type schema:Person
    74 Nded6d6e80aaf4ccf951ec5a1c7c9ad3b rdf:first Nd91fd6054bdf477491d613939beb9935
    75 rdf:rest N425298133e314edcb021de8ecb9e8690
    76 anzsrc-for:01 schema:inDefinedTermSet anzsrc-for:
    77 schema:name Mathematical Sciences
    78 rdf:type schema:DefinedTerm
    79 anzsrc-for:0102 schema:inDefinedTermSet anzsrc-for:
    80 schema:name Applied Mathematics
    81 rdf:type schema:DefinedTerm
    82 sg:journal.1136729 schema:issn 2198-0810
    83 2288-6206
    84 schema:name International Journal of Precision Engineering and Manufacturing-Green Technology
    85 rdf:type schema:Periodical
    86 sg:pub.10.1007/s00170-008-1465-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1037397804
    87 https://doi.org/10.1007/s00170-008-1465-x
    88 rdf:type schema:CreativeWork
    89 sg:pub.10.1007/s11071-015-2452-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1013866640
    90 https://doi.org/10.1007/s11071-015-2452-z
    91 rdf:type schema:CreativeWork
    92 sg:pub.10.1007/s12541-015-0014-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034605556
    93 https://doi.org/10.1007/s12541-015-0014-4
    94 rdf:type schema:CreativeWork
    95 sg:pub.10.1007/s12541-015-0277-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026874071
    96 https://doi.org/10.1007/s12541-015-0277-9
    97 rdf:type schema:CreativeWork
    98 sg:pub.10.1007/s12541-017-0194-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1092615599
    99 https://doi.org/10.1007/s12541-017-0194-1
    100 rdf:type schema:CreativeWork
    101 sg:pub.10.1007/s12541-018-0101-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1105310800
    102 https://doi.org/10.1007/s12541-018-0101-4
    103 rdf:type schema:CreativeWork
    104 sg:pub.10.1007/s40684-014-0006-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026224375
    105 https://doi.org/10.1007/s40684-014-0006-3
    106 rdf:type schema:CreativeWork
    107 sg:pub.10.1007/s40684-016-0008-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051882665
    108 https://doi.org/10.1007/s40684-016-0008-4
    109 rdf:type schema:CreativeWork
    110 sg:pub.10.1007/s40684-017-0046-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1092113307
    111 https://doi.org/10.1007/s40684-017-0046-6
    112 rdf:type schema:CreativeWork
    113 sg:pub.10.1007/s40684-018-0058-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1106287667
    114 https://doi.org/10.1007/s40684-018-0058-x
    115 rdf:type schema:CreativeWork
    116 https://doi.org/10.1016/j.finel.2010.12.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011645990
    117 rdf:type schema:CreativeWork
    118 https://doi.org/10.1016/j.mechmachtheory.2014.03.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027933670
    119 rdf:type schema:CreativeWork
    120 https://doi.org/10.1016/j.mechmachtheory.2015.02.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013037210
    121 rdf:type schema:CreativeWork
    122 https://doi.org/10.1016/j.mechmachtheory.2016.03.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024193868
    123 rdf:type schema:CreativeWork
    124 https://doi.org/10.1016/j.wear.2015.03.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034286056
    125 rdf:type schema:CreativeWork
    126 https://doi.org/10.1177/0954406213478869 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063884386
    127 rdf:type schema:CreativeWork
    128 https://www.grid.ac/institutes/grid.190737.b schema:alternateName Chongqing University
    129 schema:name School of Mechanotronics & Vehicle Engineering, Chongqing Jiaotong University, No. 66 Xuefu Street, Nan’an District, 400074, Chongqing, China
    130 The State Key Laboratory of Mechanical Transmission, Chongqing University, No. 174 Shazheng Street, Shapingba District, 400030, Chongqing, China
    131 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...