Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2019-04

AUTHORS

Jaime A. Mesa, Iván Esparragoza, Heriberto Maury

ABSTRACT

The purpose of this paper is to perform the analysis of literature review regarding the design of open architecture products (OAP) and their potential benefits within the circular economy (CE) model. The analysis involved studying more than 80 research articles during the last two decades in engineering journals. The articles were gathered through a bibliometric analysis using the most relevant keywords concerning product design, sustainability, OAP, and CE. Main trends, challenges and future scopes of research opportunities and development were identified. The study provides a framework to designers and researchers involved in the design of OAP to enhance their sustainability performance for a CE model, which integrates lifecycle considerations (reuse, remanufacturing, repair, and recycle), resource optimization, and emissions reduction. The findings include the need for design methods focused on the design of OAP to guarantee an effective circularity of resources during the whole lifecycle of products and the need of integrating manufacturing processes and material analysis to design products capable of adapting to the CE model. More... »

PAGES

377-391

References to SciGraph publications

  • 2012-07. A decision support system to estimate the carbon emission and cost of product designs in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • 2015-10. A methodology for optimizing modular design considering product end of life strategies in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • 2013-10. A systematic approach for green design in modular product development in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-04. Design method for developing a product recovery management system based on life cycle information in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
  • 2014-01. Moving towards green and sustainable manufacturing in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
  • 2014-04. Integrating axiomatic design principles into sustainable product development in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
  • 2012-07. Review of sustainable product design from life cycle perspectives in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
  • 2016-01. Trends and research challenges in remanufacturing in INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s40684-019-00052-1

    DOI

    http://dx.doi.org/10.1007/s40684-019-00052-1

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1112459926


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0905", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Civil Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Universidad Tecnol\u00f3gica de Bol\u00edvar", 
              "id": "https://www.grid.ac/institutes/grid.441684.b", 
              "name": [
                "Department of Mechanical Engineering, Universidad del Norte, Km 5\u00a0V\u00eda Puerto Colombia, 081007, Barranquilla, Colombia", 
                "Department of Mechanical Engineering, Faculty of Engineering, Universidad Tecnol\u00f3gica de Bolivar, Km 1 V\u00eda Turbaco, 131001, Cartagena\nde Indias, Colombia"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Mesa", 
            "givenName": "Jaime A.", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "name": [
                "Department of Engineering, PennState University-Brandywine, 25 Yearsley Mill Road, 19063, Media, PA, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Esparragoza", 
            "givenName": "Iv\u00e1n", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Universidad del Norte", 
              "id": "https://www.grid.ac/institutes/grid.412188.6", 
              "name": [
                "Department of Mechanical Engineering, Universidad del Norte, Km 5\u00a0V\u00eda Puerto Colombia, 081007, Barranquilla, Colombia"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Maury", 
            "givenName": "Heriberto", 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/j.jclepro.2014.07.036", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001733259"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2013.11.037", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002051846"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.procir.2015.03.104", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004531592"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2014.01.028", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004570623"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.destud.2016.09.002", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005889858"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2016.12.073", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008941010"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2006.02.007", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010827313"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-015-0304-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013445435", 
              "https://doi.org/10.1007/s12541-015-0304-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40684-014-0015-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014520751", 
              "https://doi.org/10.1007/s40684-014-0015-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/09544828.2014.974523", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015049982"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2005.09.006", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016100524"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/00207540701450179", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020758480"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compind.2009.02.003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020876982"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0959-6526(02)00164-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020880527"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0959-6526(02)00164-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020880527"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.procir.2014.06.025", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021614540"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/19397031003606494", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023168518"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/21681015.2016.1172124", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024527872"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1108/02656710310453836", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025610199"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40684-014-0010-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025781760", 
              "https://doi.org/10.1007/s40684-014-0010-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/00207540701472678", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028160006"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40684-016-0016-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028180222", 
              "https://doi.org/10.1007/s40684-016-0016-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40684-015-0022-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028666832", 
              "https://doi.org/10.1007/s40684-015-0022-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0959-6526(02)00194-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1029101309"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.procir.2015.03.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030156610"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2014.10.037", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1032089542"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2005.11.028", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033291084"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-013-4865-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037385168", 
              "https://doi.org/10.1007/s00170-013-4865-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2014.07.021", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037488420"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0007-8506(07)60028-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038881660"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/1063293x09343337", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039840552"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/1063293x09343337", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039840552"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2016.09.195", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041096351"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2013.07.030", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042208752"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0007-8506(07)62078-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043388306"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.destud.2010.08.002", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043626384"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.cirp.2013.06.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043838856"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2016.04.051", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043882677"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2016.12.048", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044207996"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2015.09.028", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049045797"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2011.07.012", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049507523"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-012-0135-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052700426", 
              "https://doi.org/10.1007/s12541-012-0135-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12541-012-0169-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053646397", 
              "https://doi.org/10.1007/s12541-012-0169-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1017/s0890060405050122", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053872731"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1017/s0890060405050122", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053872731"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1017/s0890060405050122", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053872731"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/19397038.2016.1270369", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1058413244"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.2829858", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062086629"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.2829858", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062086629"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.4002308", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062142658"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.4002308", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062142658"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1504/ijplm.2011.043186", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1067485946"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.3846/20294913.2013.876685", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1071468225"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jclepro.2017.02.011", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1083699766"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0954406217704007", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084826156"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0954406217704007", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084826156"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.resconrec.2017.06.022", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1090671542"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/14606925.2017.1352686", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1091628947"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/detc2008-49379", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1093022003"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1109/ice.2014.6871560", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1093309139"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/16258312.2013.11517316", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1100189031"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2019-04", 
        "datePublishedReg": "2019-04-01", 
        "description": "The purpose of this paper is to perform the analysis of literature review regarding the design of open architecture products (OAP) and their potential benefits within the circular economy (CE) model. The analysis involved studying more than 80 research articles during the last two decades in engineering journals. The articles were gathered through a bibliometric analysis using the most relevant keywords concerning product design, sustainability, OAP, and CE. Main trends, challenges and future scopes of research opportunities and development were identified. The study provides a framework to designers and researchers involved in the design of OAP to enhance their sustainability performance for a CE model, which integrates lifecycle considerations (reuse, remanufacturing, repair, and recycle), resource optimization, and emissions reduction. The findings include the need for design methods focused on the design of OAP to guarantee an effective circularity of resources during the whole lifecycle of products and the need of integrating manufacturing processes and material analysis to design products capable of adapting to the CE model.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s40684-019-00052-1", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136729", 
            "issn": [
              "2288-6206", 
              "2198-0810"
            ], 
            "name": "International Journal of Precision Engineering and Manufacturing-Green Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "2", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "6"
          }
        ], 
        "name": "Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model", 
        "pagination": "377-391", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "57177159a7d0e961c857ceeff569ef4f7988ff6f120ab1d4c2a8a4c23f5ad437"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s40684-019-00052-1"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1112459926"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s40684-019-00052-1", 
          "https://app.dimensions.ai/details/publication/pub.1112459926"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T13:48", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000371_0000000371/records_130792_00000006.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://link.springer.com/10.1007%2Fs40684-019-00052-1"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00052-1'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00052-1'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00052-1'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s40684-019-00052-1'


     

    This table displays all metadata directly associated to this object as RDF triples.

    248 TRIPLES      21 PREDICATES      81 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s40684-019-00052-1 schema:about anzsrc-for:09
    2 anzsrc-for:0905
    3 schema:author N95b9a63c5ed94d56980795acdeb77fc0
    4 schema:citation sg:pub.10.1007/s00170-013-4865-5
    5 sg:pub.10.1007/s12541-012-0135-y
    6 sg:pub.10.1007/s12541-012-0169-1
    7 sg:pub.10.1007/s12541-015-0304-x
    8 sg:pub.10.1007/s40684-014-0010-7
    9 sg:pub.10.1007/s40684-014-0015-2
    10 sg:pub.10.1007/s40684-015-0022-y
    11 sg:pub.10.1007/s40684-016-0016-4
    12 https://doi.org/10.1016/j.cirp.2013.06.001
    13 https://doi.org/10.1016/j.compind.2009.02.003
    14 https://doi.org/10.1016/j.destud.2010.08.002
    15 https://doi.org/10.1016/j.destud.2016.09.002
    16 https://doi.org/10.1016/j.jclepro.2005.11.028
    17 https://doi.org/10.1016/j.jclepro.2006.02.007
    18 https://doi.org/10.1016/j.jclepro.2011.07.012
    19 https://doi.org/10.1016/j.jclepro.2013.07.030
    20 https://doi.org/10.1016/j.jclepro.2013.11.037
    21 https://doi.org/10.1016/j.jclepro.2014.01.028
    22 https://doi.org/10.1016/j.jclepro.2014.07.021
    23 https://doi.org/10.1016/j.jclepro.2014.07.036
    24 https://doi.org/10.1016/j.jclepro.2014.10.037
    25 https://doi.org/10.1016/j.jclepro.2015.09.028
    26 https://doi.org/10.1016/j.jclepro.2016.04.051
    27 https://doi.org/10.1016/j.jclepro.2016.09.195
    28 https://doi.org/10.1016/j.jclepro.2016.12.048
    29 https://doi.org/10.1016/j.jclepro.2016.12.073
    30 https://doi.org/10.1016/j.jclepro.2017.02.011
    31 https://doi.org/10.1016/j.matdes.2005.09.006
    32 https://doi.org/10.1016/j.procir.2014.06.025
    33 https://doi.org/10.1016/j.procir.2015.03.004
    34 https://doi.org/10.1016/j.procir.2015.03.104
    35 https://doi.org/10.1016/j.resconrec.2017.06.022
    36 https://doi.org/10.1016/s0007-8506(07)60028-6
    37 https://doi.org/10.1016/s0007-8506(07)62078-2
    38 https://doi.org/10.1016/s0959-6526(02)00164-6
    39 https://doi.org/10.1016/s0959-6526(02)00194-4
    40 https://doi.org/10.1017/s0890060405050122
    41 https://doi.org/10.1080/00207540701450179
    42 https://doi.org/10.1080/00207540701472678
    43 https://doi.org/10.1080/09544828.2014.974523
    44 https://doi.org/10.1080/14606925.2017.1352686
    45 https://doi.org/10.1080/16258312.2013.11517316
    46 https://doi.org/10.1080/19397031003606494
    47 https://doi.org/10.1080/19397038.2016.1270369
    48 https://doi.org/10.1080/21681015.2016.1172124
    49 https://doi.org/10.1108/02656710310453836
    50 https://doi.org/10.1109/ice.2014.6871560
    51 https://doi.org/10.1115/1.2829858
    52 https://doi.org/10.1115/1.4002308
    53 https://doi.org/10.1115/detc2008-49379
    54 https://doi.org/10.1177/0954406217704007
    55 https://doi.org/10.1177/1063293x09343337
    56 https://doi.org/10.1504/ijplm.2011.043186
    57 https://doi.org/10.3846/20294913.2013.876685
    58 schema:datePublished 2019-04
    59 schema:datePublishedReg 2019-04-01
    60 schema:description The purpose of this paper is to perform the analysis of literature review regarding the design of open architecture products (OAP) and their potential benefits within the circular economy (CE) model. The analysis involved studying more than 80 research articles during the last two decades in engineering journals. The articles were gathered through a bibliometric analysis using the most relevant keywords concerning product design, sustainability, OAP, and CE. Main trends, challenges and future scopes of research opportunities and development were identified. The study provides a framework to designers and researchers involved in the design of OAP to enhance their sustainability performance for a CE model, which integrates lifecycle considerations (reuse, remanufacturing, repair, and recycle), resource optimization, and emissions reduction. The findings include the need for design methods focused on the design of OAP to guarantee an effective circularity of resources during the whole lifecycle of products and the need of integrating manufacturing processes and material analysis to design products capable of adapting to the CE model.
    61 schema:genre research_article
    62 schema:inLanguage en
    63 schema:isAccessibleForFree false
    64 schema:isPartOf N4b3a6943072e4f9e9432181d417753ba
    65 N73e01bd380ed4ee2988fa22a519ef521
    66 sg:journal.1136729
    67 schema:name Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model
    68 schema:pagination 377-391
    69 schema:productId N0f03aff2e0624f139743af61c1cdf273
    70 N1e94f4dbd0194ebaa7ad94b05a339a3c
    71 N49e6ee1bc6084f5680338f9e4789c2ca
    72 schema:sameAs https://app.dimensions.ai/details/publication/pub.1112459926
    73 https://doi.org/10.1007/s40684-019-00052-1
    74 schema:sdDatePublished 2019-04-11T13:48
    75 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    76 schema:sdPublisher Nda159d310f2c4669819ed9ea82eaed47
    77 schema:url https://link.springer.com/10.1007%2Fs40684-019-00052-1
    78 sgo:license sg:explorer/license/
    79 sgo:sdDataset articles
    80 rdf:type schema:ScholarlyArticle
    81 N0f03aff2e0624f139743af61c1cdf273 schema:name dimensions_id
    82 schema:value pub.1112459926
    83 rdf:type schema:PropertyValue
    84 N12ec47677f124ce6a1d84c555a907565 schema:affiliation https://www.grid.ac/institutes/grid.412188.6
    85 schema:familyName Maury
    86 schema:givenName Heriberto
    87 rdf:type schema:Person
    88 N1bb3f20b9e964480b4c0f2214fa2321f rdf:first N68db489fcc59435b97e306ccc016c8db
    89 rdf:rest Na16978636b91474189a4a5c2a3d4f5a5
    90 N1e94f4dbd0194ebaa7ad94b05a339a3c schema:name doi
    91 schema:value 10.1007/s40684-019-00052-1
    92 rdf:type schema:PropertyValue
    93 N407fbfeecf5d46649305d7318a9016ae schema:name Department of Engineering, PennState University-Brandywine, 25 Yearsley Mill Road, 19063, Media, PA, USA
    94 rdf:type schema:Organization
    95 N4580e085dcbd40e9933aaf04918a2ae5 schema:affiliation https://www.grid.ac/institutes/grid.441684.b
    96 schema:familyName Mesa
    97 schema:givenName Jaime A.
    98 rdf:type schema:Person
    99 N49e6ee1bc6084f5680338f9e4789c2ca schema:name readcube_id
    100 schema:value 57177159a7d0e961c857ceeff569ef4f7988ff6f120ab1d4c2a8a4c23f5ad437
    101 rdf:type schema:PropertyValue
    102 N4b3a6943072e4f9e9432181d417753ba schema:issueNumber 2
    103 rdf:type schema:PublicationIssue
    104 N68db489fcc59435b97e306ccc016c8db schema:affiliation N407fbfeecf5d46649305d7318a9016ae
    105 schema:familyName Esparragoza
    106 schema:givenName Iván
    107 rdf:type schema:Person
    108 N73e01bd380ed4ee2988fa22a519ef521 schema:volumeNumber 6
    109 rdf:type schema:PublicationVolume
    110 N95b9a63c5ed94d56980795acdeb77fc0 rdf:first N4580e085dcbd40e9933aaf04918a2ae5
    111 rdf:rest N1bb3f20b9e964480b4c0f2214fa2321f
    112 Na16978636b91474189a4a5c2a3d4f5a5 rdf:first N12ec47677f124ce6a1d84c555a907565
    113 rdf:rest rdf:nil
    114 Nda159d310f2c4669819ed9ea82eaed47 schema:name Springer Nature - SN SciGraph project
    115 rdf:type schema:Organization
    116 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    117 schema:name Engineering
    118 rdf:type schema:DefinedTerm
    119 anzsrc-for:0905 schema:inDefinedTermSet anzsrc-for:
    120 schema:name Civil Engineering
    121 rdf:type schema:DefinedTerm
    122 sg:journal.1136729 schema:issn 2198-0810
    123 2288-6206
    124 schema:name International Journal of Precision Engineering and Manufacturing-Green Technology
    125 rdf:type schema:Periodical
    126 sg:pub.10.1007/s00170-013-4865-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037385168
    127 https://doi.org/10.1007/s00170-013-4865-5
    128 rdf:type schema:CreativeWork
    129 sg:pub.10.1007/s12541-012-0135-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1052700426
    130 https://doi.org/10.1007/s12541-012-0135-y
    131 rdf:type schema:CreativeWork
    132 sg:pub.10.1007/s12541-012-0169-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053646397
    133 https://doi.org/10.1007/s12541-012-0169-1
    134 rdf:type schema:CreativeWork
    135 sg:pub.10.1007/s12541-015-0304-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1013445435
    136 https://doi.org/10.1007/s12541-015-0304-x
    137 rdf:type schema:CreativeWork
    138 sg:pub.10.1007/s40684-014-0010-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025781760
    139 https://doi.org/10.1007/s40684-014-0010-7
    140 rdf:type schema:CreativeWork
    141 sg:pub.10.1007/s40684-014-0015-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014520751
    142 https://doi.org/10.1007/s40684-014-0015-2
    143 rdf:type schema:CreativeWork
    144 sg:pub.10.1007/s40684-015-0022-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1028666832
    145 https://doi.org/10.1007/s40684-015-0022-y
    146 rdf:type schema:CreativeWork
    147 sg:pub.10.1007/s40684-016-0016-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028180222
    148 https://doi.org/10.1007/s40684-016-0016-4
    149 rdf:type schema:CreativeWork
    150 https://doi.org/10.1016/j.cirp.2013.06.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043838856
    151 rdf:type schema:CreativeWork
    152 https://doi.org/10.1016/j.compind.2009.02.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020876982
    153 rdf:type schema:CreativeWork
    154 https://doi.org/10.1016/j.destud.2010.08.002 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043626384
    155 rdf:type schema:CreativeWork
    156 https://doi.org/10.1016/j.destud.2016.09.002 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005889858
    157 rdf:type schema:CreativeWork
    158 https://doi.org/10.1016/j.jclepro.2005.11.028 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033291084
    159 rdf:type schema:CreativeWork
    160 https://doi.org/10.1016/j.jclepro.2006.02.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010827313
    161 rdf:type schema:CreativeWork
    162 https://doi.org/10.1016/j.jclepro.2011.07.012 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049507523
    163 rdf:type schema:CreativeWork
    164 https://doi.org/10.1016/j.jclepro.2013.07.030 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042208752
    165 rdf:type schema:CreativeWork
    166 https://doi.org/10.1016/j.jclepro.2013.11.037 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002051846
    167 rdf:type schema:CreativeWork
    168 https://doi.org/10.1016/j.jclepro.2014.01.028 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004570623
    169 rdf:type schema:CreativeWork
    170 https://doi.org/10.1016/j.jclepro.2014.07.021 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037488420
    171 rdf:type schema:CreativeWork
    172 https://doi.org/10.1016/j.jclepro.2014.07.036 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001733259
    173 rdf:type schema:CreativeWork
    174 https://doi.org/10.1016/j.jclepro.2014.10.037 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032089542
    175 rdf:type schema:CreativeWork
    176 https://doi.org/10.1016/j.jclepro.2015.09.028 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049045797
    177 rdf:type schema:CreativeWork
    178 https://doi.org/10.1016/j.jclepro.2016.04.051 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043882677
    179 rdf:type schema:CreativeWork
    180 https://doi.org/10.1016/j.jclepro.2016.09.195 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041096351
    181 rdf:type schema:CreativeWork
    182 https://doi.org/10.1016/j.jclepro.2016.12.048 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044207996
    183 rdf:type schema:CreativeWork
    184 https://doi.org/10.1016/j.jclepro.2016.12.073 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008941010
    185 rdf:type schema:CreativeWork
    186 https://doi.org/10.1016/j.jclepro.2017.02.011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1083699766
    187 rdf:type schema:CreativeWork
    188 https://doi.org/10.1016/j.matdes.2005.09.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016100524
    189 rdf:type schema:CreativeWork
    190 https://doi.org/10.1016/j.procir.2014.06.025 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021614540
    191 rdf:type schema:CreativeWork
    192 https://doi.org/10.1016/j.procir.2015.03.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030156610
    193 rdf:type schema:CreativeWork
    194 https://doi.org/10.1016/j.procir.2015.03.104 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004531592
    195 rdf:type schema:CreativeWork
    196 https://doi.org/10.1016/j.resconrec.2017.06.022 schema:sameAs https://app.dimensions.ai/details/publication/pub.1090671542
    197 rdf:type schema:CreativeWork
    198 https://doi.org/10.1016/s0007-8506(07)60028-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038881660
    199 rdf:type schema:CreativeWork
    200 https://doi.org/10.1016/s0007-8506(07)62078-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043388306
    201 rdf:type schema:CreativeWork
    202 https://doi.org/10.1016/s0959-6526(02)00164-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020880527
    203 rdf:type schema:CreativeWork
    204 https://doi.org/10.1016/s0959-6526(02)00194-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1029101309
    205 rdf:type schema:CreativeWork
    206 https://doi.org/10.1017/s0890060405050122 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053872731
    207 rdf:type schema:CreativeWork
    208 https://doi.org/10.1080/00207540701450179 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020758480
    209 rdf:type schema:CreativeWork
    210 https://doi.org/10.1080/00207540701472678 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028160006
    211 rdf:type schema:CreativeWork
    212 https://doi.org/10.1080/09544828.2014.974523 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015049982
    213 rdf:type schema:CreativeWork
    214 https://doi.org/10.1080/14606925.2017.1352686 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091628947
    215 rdf:type schema:CreativeWork
    216 https://doi.org/10.1080/16258312.2013.11517316 schema:sameAs https://app.dimensions.ai/details/publication/pub.1100189031
    217 rdf:type schema:CreativeWork
    218 https://doi.org/10.1080/19397031003606494 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023168518
    219 rdf:type schema:CreativeWork
    220 https://doi.org/10.1080/19397038.2016.1270369 schema:sameAs https://app.dimensions.ai/details/publication/pub.1058413244
    221 rdf:type schema:CreativeWork
    222 https://doi.org/10.1080/21681015.2016.1172124 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024527872
    223 rdf:type schema:CreativeWork
    224 https://doi.org/10.1108/02656710310453836 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025610199
    225 rdf:type schema:CreativeWork
    226 https://doi.org/10.1109/ice.2014.6871560 schema:sameAs https://app.dimensions.ai/details/publication/pub.1093309139
    227 rdf:type schema:CreativeWork
    228 https://doi.org/10.1115/1.2829858 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062086629
    229 rdf:type schema:CreativeWork
    230 https://doi.org/10.1115/1.4002308 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062142658
    231 rdf:type schema:CreativeWork
    232 https://doi.org/10.1115/detc2008-49379 schema:sameAs https://app.dimensions.ai/details/publication/pub.1093022003
    233 rdf:type schema:CreativeWork
    234 https://doi.org/10.1177/0954406217704007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084826156
    235 rdf:type schema:CreativeWork
    236 https://doi.org/10.1177/1063293x09343337 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039840552
    237 rdf:type schema:CreativeWork
    238 https://doi.org/10.1504/ijplm.2011.043186 schema:sameAs https://app.dimensions.ai/details/publication/pub.1067485946
    239 rdf:type schema:CreativeWork
    240 https://doi.org/10.3846/20294913.2013.876685 schema:sameAs https://app.dimensions.ai/details/publication/pub.1071468225
    241 rdf:type schema:CreativeWork
    242 https://www.grid.ac/institutes/grid.412188.6 schema:alternateName Universidad del Norte
    243 schema:name Department of Mechanical Engineering, Universidad del Norte, Km 5 Vía Puerto Colombia, 081007, Barranquilla, Colombia
    244 rdf:type schema:Organization
    245 https://www.grid.ac/institutes/grid.441684.b schema:alternateName Universidad Tecnológica de Bolívar
    246 schema:name Department of Mechanical Engineering, Faculty of Engineering, Universidad Tecnológica de Bolivar, Km 1 Vía Turbaco, 131001, Cartagena de Indias, Colombia
    247 Department of Mechanical Engineering, Universidad del Norte, Km 5 Vía Puerto Colombia, 081007, Barranquilla, Colombia
    248 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...