Enhanced Fatigue Properties of 2219 Al Alloy Joints via Bobbin Tool Friction Stir Welding View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2022-09-21

AUTHORS

Zhenlin Wang, Beibei Wang, Zhen Zhang, Peng Xue, Yunfei Hao, Yanhua Zhao, Dingrui Ni, Guoqing Wang, Zongyi Ma

ABSTRACT

In the present study, 2219-T87 Al alloy plates, 4 mm in thickness, were subjected to bobbin tool friction stir welding (BT-FSW) under relatively high welding speeds of 200 and 400 mm/min, with the aim to analyze the effect of welding speeds on fatigue properties of the joints. The results showed that the tension–tension high-cycle fatigue performance of the BT-FSW joints at room temperature was significantly enhanced compared to that of other joints of 2xxx series Al alloys counterparts. Particularly at a high welding speed of 400 mm/min, the fatigue strength of the joint reached 78% of the base material together with a high tensile strength of 311 MPa. It was found that the joint line remnants had no effects on the fatigue properties of the BT-FSW joints due to the elimination of root flaws under the action of the lower shoulder. Most of the samples with the welding speed of 200 mm/min failed at the thermo-mechanical zone (TMAZ) during fatigue tests, attributable to the coarsened grains and precipitates, but all of the samples with high welding speed of 400 mm/min randomly failed at the nugget zone due to the improved hardness value in the TMAZ. More... »

PAGES

1-11

References to SciGraph publications

  • 2008-07-15. Influence of Tool Dimension and Welding Parameters on Microstructure and Mechanical Properties of Friction-Stir-Welded 6061-T651 Aluminum Alloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2014-01-29. Fatigue Behavior of Friction Stir-Welded Joints Repaired by Grinding in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2018-10-20. High-Speed Friction Stir Welding of SiCp/Al–Mg–Si–Cu Composite in ACTA METALLURGICA SINICA (ENGLISH LETTERS)
  • 2018-04-09. Ultrafine-Grained Microstructure and Improved Mechanical Behaviors of Friction Stir Welded Cu and Cu–30Zn Joints in ACTA METALLURGICA SINICA (ENGLISH LETTERS)
  • 2019-04-01. Microstructure and Mechanical Behavior of Friction-Stir-Welded 2017A-T451 Aluminum Alloy in TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
  • 2022-02-02. Microstructure and Mechanical Properties in Friction Stir Welded Thick Al–Zn–Mg–Cu Alloy Plate in ACTA METALLURGICA SINICA (ENGLISH LETTERS)
  • 2014-05-11. Influences of rotation speed on microstructures and mechanical properties of 6061-T6 aluminum alloy joints fabricated by self-reacting friction stir welding tool in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2011-11-29. Effect of Welding Parameters on Tensile Properties and Fatigue Behavior of Friction Stir Welded 2014-T6 Aluminum Alloy in TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
  • 2010-06-17. Effects of Welding Processes and Post-Weld Aging Treatment on Fatigue Behavior of AA2219 Aluminium Alloy Joints in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2012-09. Influences Of Welding Processes And Post- Weld Ageing Treatment On Mechanical And Metallurgical Properties Of Aa2219 Aluminium Alloy Joints in WELDING IN THE WORLD
  • 2012-01-25. Effect of welding parameters on microstructure and mechanical properties of friction stir welded 2219Al-T6 joints in JOURNAL OF MATERIALS SCIENCE
  • 2020-08-14. Evolution of Quasicrystals and Long-Period Stacking Ordered Structures During Severe Plastic Deformation and Mixing of Dissimilar Mg Alloys Upon Friction Stir Welding in ACTA METALLURGICA SINICA (ENGLISH LETTERS)
  • 2022-01-08. Microstructure and Mechanical Properties of Friction Stir Welded 1.5 GPa Martensitic High-Strength Steel Plates in ACTA METALLURGICA SINICA (ENGLISH LETTERS)
  • 2006-03-09. Effect of kissing bond on fatigue behavior of friction stir welds on Al 5083 alloy in JOURNAL OF MATERIALS SCIENCE
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s40195-022-01465-9

    DOI

    http://dx.doi.org/10.1007/s40195-022-01465-9

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1151190788


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China", 
              "id": "http://www.grid.ac/institutes/grid.59053.3a", 
              "name": [
                "Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China", 
                "School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Wang", 
            "givenName": "Zhenlin", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China", 
              "id": "http://www.grid.ac/institutes/grid.458487.2", 
              "name": [
                "Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Wang", 
            "givenName": "Beibei", 
            "id": "sg:person.011136643303.43", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011136643303.43"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China", 
              "id": "http://www.grid.ac/institutes/grid.458487.2", 
              "name": [
                "Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zhang", 
            "givenName": "Zhen", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China", 
              "id": "http://www.grid.ac/institutes/grid.59053.3a", 
              "name": [
                "Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China", 
                "School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Xue", 
            "givenName": "Peng", 
            "id": "sg:person.011666110503.51", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011666110503.51"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "China Academy of Launch Vehicle Technology, 100076, Beijing, China", 
              "id": "http://www.grid.ac/institutes/grid.482529.0", 
              "name": [
                "China Academy of Launch Vehicle Technology, 100076, Beijing, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Hao", 
            "givenName": "Yunfei", 
            "id": "sg:person.015762604740.92", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015762604740.92"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "China Academy of Launch Vehicle Technology, 100076, Beijing, China", 
              "id": "http://www.grid.ac/institutes/grid.482529.0", 
              "name": [
                "China Academy of Launch Vehicle Technology, 100076, Beijing, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zhao", 
            "givenName": "Yanhua", 
            "id": "sg:person.013572263340.17", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013572263340.17"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China", 
              "id": "http://www.grid.ac/institutes/grid.59053.3a", 
              "name": [
                "Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China", 
                "School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ni", 
            "givenName": "Dingrui", 
            "id": "sg:person.010051517351.62", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010051517351.62"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Capital Aerospace Machinery Company, 100076, Beijing, China", 
              "id": "http://www.grid.ac/institutes/None", 
              "name": [
                "Capital Aerospace Machinery Company, 100076, Beijing, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Wang", 
            "givenName": "Guoqing", 
            "id": "sg:person.011401741740.23", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011401741740.23"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China", 
              "id": "http://www.grid.ac/institutes/grid.59053.3a", 
              "name": [
                "Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China", 
                "School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ma", 
            "givenName": "Zongyi", 
            "id": "sg:person.011104257533.87", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011104257533.87"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/s40195-022-01373-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1145202188", 
              "https://doi.org/10.1007/s40195-022-01373-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40195-020-01122-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1130127073", 
              "https://doi.org/10.1007/s40195-020-01122-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-006-6337-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008555779", 
              "https://doi.org/10.1007/s10853-006-6337-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40195-018-0833-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1107740583", 
              "https://doi.org/10.1007/s40195-018-0833-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-012-6261-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000903940", 
              "https://doi.org/10.1007/s10853-012-6261-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12666-019-01663-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1113172540", 
              "https://doi.org/10.1007/s12666-019-01663-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-014-5857-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030306074", 
              "https://doi.org/10.1007/s00170-014-5857-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40195-018-0719-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1103193297", 
              "https://doi.org/10.1007/s40195-018-0719-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40195-021-01358-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1144502039", 
              "https://doi.org/10.1007/s40195-021-01358-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-008-9586-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001466269", 
              "https://doi.org/10.1007/s11661-008-9586-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-014-0875-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021711819", 
              "https://doi.org/10.1007/s11665-014-0875-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12666-011-0069-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051212994", 
              "https://doi.org/10.1007/s12666-011-0069-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf03321386", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1011459539", 
              "https://doi.org/10.1007/bf03321386"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-010-9682-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052690766", 
              "https://doi.org/10.1007/s11665-010-9682-5"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2022-09-21", 
        "datePublishedReg": "2022-09-21", 
        "description": "In the present study, 2219-T87 Al alloy plates, 4\u00a0mm in thickness, were subjected to bobbin tool friction stir welding (BT-FSW) under relatively high welding speeds of 200 and 400\u00a0mm/min, with the aim to analyze the effect of welding speeds on fatigue properties of the joints. The results showed that the tension\u2013tension high-cycle fatigue performance of the BT-FSW joints at room temperature was significantly enhanced compared to that of other joints of 2xxx series Al alloys counterparts. Particularly at a high welding speed of 400\u00a0mm/min, the fatigue strength of the joint reached 78% of the base material together with a high tensile strength of 311\u00a0MPa. It was found that the joint line remnants had no effects on the fatigue properties of the BT-FSW joints due to the elimination of root flaws under the action of the lower shoulder. Most of the samples with the welding speed of 200\u00a0mm/min failed at the thermo-mechanical zone (TMAZ) during fatigue tests, attributable to the coarsened grains and precipitates, but all of the samples with high welding speed of 400\u00a0mm/min randomly failed at the nugget zone due to the improved hardness value in the TMAZ.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/s40195-022-01465-9", 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1381337", 
            "issn": [
              "0412-1961", 
              "1006-7191"
            ], 
            "name": "Acta Metallurgica Sinica (English Letters)", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }
        ], 
        "keywords": [
          "high welding speed", 
          "bobbin tool friction stir welding", 
          "tool friction stir welding", 
          "friction stir welding", 
          "welding speed", 
          "fatigue properties", 
          "stir welding", 
          "high cycle fatigue performance", 
          "joint line remnants", 
          "Al alloy joints", 
          "Al alloy plate", 
          "enhanced fatigue property", 
          "improved hardness values", 
          "high tensile strength", 
          "root flaws", 
          "alloy joints", 
          "nugget zone", 
          "fatigue performance", 
          "alloy plates", 
          "fatigue strength", 
          "fatigue tests", 
          "series Al", 
          "base material", 
          "tensile strength", 
          "hardness values", 
          "welding", 
          "room temperature", 
          "lower shoulder", 
          "speed", 
          "joints", 
          "strength", 
          "properties", 
          "MPa", 
          "precipitates", 
          "thickness", 
          "zone", 
          "plate", 
          "temperature", 
          "materials", 
          "grains", 
          "performance", 
          "min", 
          "flaws", 
          "effect", 
          "al", 
          "test", 
          "samples", 
          "present study", 
          "results", 
          "values", 
          "elimination", 
          "shoulder", 
          "aim", 
          "study", 
          "action", 
          "remnants"
        ], 
        "name": "Enhanced Fatigue Properties of 2219 Al Alloy Joints via Bobbin Tool Friction Stir Welding", 
        "pagination": "1-11", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1151190788"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s40195-022-01465-9"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s40195-022-01465-9", 
          "https://app.dimensions.ai/details/publication/pub.1151190788"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-12-01T06:44", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20221201/entities/gbq_results/article/article_955.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/s40195-022-01465-9"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s40195-022-01465-9'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s40195-022-01465-9'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s40195-022-01465-9'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s40195-022-01465-9'


     

    This table displays all metadata directly associated to this object as RDF triples.

    227 TRIPLES      21 PREDICATES      92 URIs      70 LITERALS      4 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s40195-022-01465-9 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N47009068e3414ec7bc5e572f433be37e
    4 schema:citation sg:pub.10.1007/bf03321386
    5 sg:pub.10.1007/s00170-014-5857-9
    6 sg:pub.10.1007/s10853-006-6337-x
    7 sg:pub.10.1007/s10853-012-6261-1
    8 sg:pub.10.1007/s11661-008-9586-2
    9 sg:pub.10.1007/s11665-010-9682-5
    10 sg:pub.10.1007/s11665-014-0875-1
    11 sg:pub.10.1007/s12666-011-0069-6
    12 sg:pub.10.1007/s12666-019-01663-7
    13 sg:pub.10.1007/s40195-018-0719-3
    14 sg:pub.10.1007/s40195-018-0833-2
    15 sg:pub.10.1007/s40195-020-01122-z
    16 sg:pub.10.1007/s40195-021-01358-3
    17 sg:pub.10.1007/s40195-022-01373-y
    18 schema:datePublished 2022-09-21
    19 schema:datePublishedReg 2022-09-21
    20 schema:description In the present study, 2219-T87 Al alloy plates, 4 mm in thickness, were subjected to bobbin tool friction stir welding (BT-FSW) under relatively high welding speeds of 200 and 400 mm/min, with the aim to analyze the effect of welding speeds on fatigue properties of the joints. The results showed that the tension–tension high-cycle fatigue performance of the BT-FSW joints at room temperature was significantly enhanced compared to that of other joints of 2xxx series Al alloys counterparts. Particularly at a high welding speed of 400 mm/min, the fatigue strength of the joint reached 78% of the base material together with a high tensile strength of 311 MPa. It was found that the joint line remnants had no effects on the fatigue properties of the BT-FSW joints due to the elimination of root flaws under the action of the lower shoulder. Most of the samples with the welding speed of 200 mm/min failed at the thermo-mechanical zone (TMAZ) during fatigue tests, attributable to the coarsened grains and precipitates, but all of the samples with high welding speed of 400 mm/min randomly failed at the nugget zone due to the improved hardness value in the TMAZ.
    21 schema:genre article
    22 schema:isAccessibleForFree false
    23 schema:isPartOf sg:journal.1381337
    24 schema:keywords Al alloy joints
    25 Al alloy plate
    26 MPa
    27 action
    28 aim
    29 al
    30 alloy joints
    31 alloy plates
    32 base material
    33 bobbin tool friction stir welding
    34 effect
    35 elimination
    36 enhanced fatigue property
    37 fatigue performance
    38 fatigue properties
    39 fatigue strength
    40 fatigue tests
    41 flaws
    42 friction stir welding
    43 grains
    44 hardness values
    45 high cycle fatigue performance
    46 high tensile strength
    47 high welding speed
    48 improved hardness values
    49 joint line remnants
    50 joints
    51 lower shoulder
    52 materials
    53 min
    54 nugget zone
    55 performance
    56 plate
    57 precipitates
    58 present study
    59 properties
    60 remnants
    61 results
    62 room temperature
    63 root flaws
    64 samples
    65 series Al
    66 shoulder
    67 speed
    68 stir welding
    69 strength
    70 study
    71 temperature
    72 tensile strength
    73 test
    74 thickness
    75 tool friction stir welding
    76 values
    77 welding
    78 welding speed
    79 zone
    80 schema:name Enhanced Fatigue Properties of 2219 Al Alloy Joints via Bobbin Tool Friction Stir Welding
    81 schema:pagination 1-11
    82 schema:productId N0c8cd8e358044859a8a9ea1b4eb387a3
    83 Ndbf96960ae544d069aa404e9845add82
    84 schema:sameAs https://app.dimensions.ai/details/publication/pub.1151190788
    85 https://doi.org/10.1007/s40195-022-01465-9
    86 schema:sdDatePublished 2022-12-01T06:44
    87 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    88 schema:sdPublisher N311d59b91eee4f49a959513eb8f861c0
    89 schema:url https://doi.org/10.1007/s40195-022-01465-9
    90 sgo:license sg:explorer/license/
    91 sgo:sdDataset articles
    92 rdf:type schema:ScholarlyArticle
    93 N0c8cd8e358044859a8a9ea1b4eb387a3 schema:name doi
    94 schema:value 10.1007/s40195-022-01465-9
    95 rdf:type schema:PropertyValue
    96 N139e138ee7e54fda97e8c4986c61f31a rdf:first Nf0195f0ecbd14a6394bbb1ccef191719
    97 rdf:rest N9454002fe4f346569ef4eb3965fc83bc
    98 N209fb2c038ad403a8e27cb6961d8e8dd rdf:first sg:person.011136643303.43
    99 rdf:rest N139e138ee7e54fda97e8c4986c61f31a
    100 N311d59b91eee4f49a959513eb8f861c0 schema:name Springer Nature - SN SciGraph project
    101 rdf:type schema:Organization
    102 N47009068e3414ec7bc5e572f433be37e rdf:first N80de609b498240b698390fedb7951c7c
    103 rdf:rest N209fb2c038ad403a8e27cb6961d8e8dd
    104 N4cfc424f36754493aa614f149423d0e4 rdf:first sg:person.011401741740.23
    105 rdf:rest Nf07e813a44ac456d99323675d17b1d8a
    106 N80de609b498240b698390fedb7951c7c schema:affiliation grid-institutes:grid.59053.3a
    107 schema:familyName Wang
    108 schema:givenName Zhenlin
    109 rdf:type schema:Person
    110 N9454002fe4f346569ef4eb3965fc83bc rdf:first sg:person.011666110503.51
    111 rdf:rest Nde7b5e0108e0499bb3e6f8e824d59a87
    112 N99f24dcac51c47909d45824707cc35a2 rdf:first sg:person.010051517351.62
    113 rdf:rest N4cfc424f36754493aa614f149423d0e4
    114 Nd6d48c2c04244469ba94178ca287f0cc rdf:first sg:person.013572263340.17
    115 rdf:rest N99f24dcac51c47909d45824707cc35a2
    116 Ndbf96960ae544d069aa404e9845add82 schema:name dimensions_id
    117 schema:value pub.1151190788
    118 rdf:type schema:PropertyValue
    119 Nde7b5e0108e0499bb3e6f8e824d59a87 rdf:first sg:person.015762604740.92
    120 rdf:rest Nd6d48c2c04244469ba94178ca287f0cc
    121 Nf0195f0ecbd14a6394bbb1ccef191719 schema:affiliation grid-institutes:grid.458487.2
    122 schema:familyName Zhang
    123 schema:givenName Zhen
    124 rdf:type schema:Person
    125 Nf07e813a44ac456d99323675d17b1d8a rdf:first sg:person.011104257533.87
    126 rdf:rest rdf:nil
    127 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    128 schema:name Engineering
    129 rdf:type schema:DefinedTerm
    130 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    131 schema:name Materials Engineering
    132 rdf:type schema:DefinedTerm
    133 sg:journal.1381337 schema:issn 0412-1961
    134 1006-7191
    135 schema:name Acta Metallurgica Sinica (English Letters)
    136 schema:publisher Springer Nature
    137 rdf:type schema:Periodical
    138 sg:person.010051517351.62 schema:affiliation grid-institutes:grid.59053.3a
    139 schema:familyName Ni
    140 schema:givenName Dingrui
    141 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010051517351.62
    142 rdf:type schema:Person
    143 sg:person.011104257533.87 schema:affiliation grid-institutes:grid.59053.3a
    144 schema:familyName Ma
    145 schema:givenName Zongyi
    146 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011104257533.87
    147 rdf:type schema:Person
    148 sg:person.011136643303.43 schema:affiliation grid-institutes:grid.458487.2
    149 schema:familyName Wang
    150 schema:givenName Beibei
    151 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011136643303.43
    152 rdf:type schema:Person
    153 sg:person.011401741740.23 schema:affiliation grid-institutes:None
    154 schema:familyName Wang
    155 schema:givenName Guoqing
    156 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011401741740.23
    157 rdf:type schema:Person
    158 sg:person.011666110503.51 schema:affiliation grid-institutes:grid.59053.3a
    159 schema:familyName Xue
    160 schema:givenName Peng
    161 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011666110503.51
    162 rdf:type schema:Person
    163 sg:person.013572263340.17 schema:affiliation grid-institutes:grid.482529.0
    164 schema:familyName Zhao
    165 schema:givenName Yanhua
    166 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013572263340.17
    167 rdf:type schema:Person
    168 sg:person.015762604740.92 schema:affiliation grid-institutes:grid.482529.0
    169 schema:familyName Hao
    170 schema:givenName Yunfei
    171 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015762604740.92
    172 rdf:type schema:Person
    173 sg:pub.10.1007/bf03321386 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011459539
    174 https://doi.org/10.1007/bf03321386
    175 rdf:type schema:CreativeWork
    176 sg:pub.10.1007/s00170-014-5857-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030306074
    177 https://doi.org/10.1007/s00170-014-5857-9
    178 rdf:type schema:CreativeWork
    179 sg:pub.10.1007/s10853-006-6337-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1008555779
    180 https://doi.org/10.1007/s10853-006-6337-x
    181 rdf:type schema:CreativeWork
    182 sg:pub.10.1007/s10853-012-6261-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000903940
    183 https://doi.org/10.1007/s10853-012-6261-1
    184 rdf:type schema:CreativeWork
    185 sg:pub.10.1007/s11661-008-9586-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001466269
    186 https://doi.org/10.1007/s11661-008-9586-2
    187 rdf:type schema:CreativeWork
    188 sg:pub.10.1007/s11665-010-9682-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052690766
    189 https://doi.org/10.1007/s11665-010-9682-5
    190 rdf:type schema:CreativeWork
    191 sg:pub.10.1007/s11665-014-0875-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021711819
    192 https://doi.org/10.1007/s11665-014-0875-1
    193 rdf:type schema:CreativeWork
    194 sg:pub.10.1007/s12666-011-0069-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051212994
    195 https://doi.org/10.1007/s12666-011-0069-6
    196 rdf:type schema:CreativeWork
    197 sg:pub.10.1007/s12666-019-01663-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1113172540
    198 https://doi.org/10.1007/s12666-019-01663-7
    199 rdf:type schema:CreativeWork
    200 sg:pub.10.1007/s40195-018-0719-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1103193297
    201 https://doi.org/10.1007/s40195-018-0719-3
    202 rdf:type schema:CreativeWork
    203 sg:pub.10.1007/s40195-018-0833-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1107740583
    204 https://doi.org/10.1007/s40195-018-0833-2
    205 rdf:type schema:CreativeWork
    206 sg:pub.10.1007/s40195-020-01122-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1130127073
    207 https://doi.org/10.1007/s40195-020-01122-z
    208 rdf:type schema:CreativeWork
    209 sg:pub.10.1007/s40195-021-01358-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1144502039
    210 https://doi.org/10.1007/s40195-021-01358-3
    211 rdf:type schema:CreativeWork
    212 sg:pub.10.1007/s40195-022-01373-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1145202188
    213 https://doi.org/10.1007/s40195-022-01373-y
    214 rdf:type schema:CreativeWork
    215 grid-institutes:None schema:alternateName Capital Aerospace Machinery Company, 100076, Beijing, China
    216 schema:name Capital Aerospace Machinery Company, 100076, Beijing, China
    217 rdf:type schema:Organization
    218 grid-institutes:grid.458487.2 schema:alternateName Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China
    219 schema:name Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China
    220 rdf:type schema:Organization
    221 grid-institutes:grid.482529.0 schema:alternateName China Academy of Launch Vehicle Technology, 100076, Beijing, China
    222 schema:name China Academy of Launch Vehicle Technology, 100076, Beijing, China
    223 rdf:type schema:Organization
    224 grid-institutes:grid.59053.3a schema:alternateName School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China
    225 schema:name School of Materials Science and Engineering, University of Science and Technology of China, 110016, Shenyang, China
    226 Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang, China
    227 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...