Numerical analysis of residual stress distribution on peening process View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2017-02-13

AUTHORS

Kazuki Ikushima, Masakazu Shibahara, Koichi Akita, Hiroshi Suzuki, Satoshi Morooka, Satoru Nishikawa, Takashi Furukawa

ABSTRACT

Various peening techniques are employed to prevent stress corrosion cracking or to extend the fatigue life of structures. In this study, to investigate the effect of shot peening on operation, an analysis method that predicts the stress distribution due to shot peening was proposed. Using the proposed method, the load distribution from the shot collisions was modeled, and it was integrated with a dynamic analysis method based on the idealized explicit FEM (IEFEM). The accuracy of the proposed method was confirmed by comparing the stress distribution from the collision of a single shot with the results analyzed using ABAQUS. A thermal elastic-plastic analysis method using IEFEM was applied to the analysis of the residual stress distribution of a multi-pass-welded pipe joint. The calculated residual stress distribution was compared with the measured residual stress distribution measured using X-ray diffraction (XRD). The results showed that the two welding residual distributions were in good agreement. Considering the calculated welding residual stress distribution, the modification of the stress distribution due to shot peening was predicted using the proposed method. A similar stress distribution was obtained using XRD for the case where a large number of collisions were considered. More... »

PAGES

517-527

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s40194-017-0430-4

DOI

http://dx.doi.org/10.1007/s40194-017-0430-4

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1083806216


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0905", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Civil Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Osaka Prefecture University, Sakai, Osaka, Japan", 
          "id": "http://www.grid.ac/institutes/grid.261455.1", 
          "name": [
            "Osaka Prefecture University, Sakai, Osaka, Japan"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Ikushima", 
        "givenName": "Kazuki", 
        "id": "sg:person.07545272163.98", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07545272163.98"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Osaka Prefecture University, Sakai, Osaka, Japan", 
          "id": "http://www.grid.ac/institutes/grid.261455.1", 
          "name": [
            "Osaka Prefecture University, Sakai, Osaka, Japan"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Shibahara", 
        "givenName": "Masakazu", 
        "id": "sg:person.011237070204.70", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011237070204.70"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Japan Atomic Energy Agency, Tokai, Ibaraki, Japan", 
          "id": "http://www.grid.ac/institutes/grid.20256.33", 
          "name": [
            "Japan Atomic Energy Agency, Tokai, Ibaraki, Japan"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Akita", 
        "givenName": "Koichi", 
        "id": "sg:person.016232056575.62", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016232056575.62"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Japan Atomic Energy Agency, Tokai, Ibaraki, Japan", 
          "id": "http://www.grid.ac/institutes/grid.20256.33", 
          "name": [
            "Japan Atomic Energy Agency, Tokai, Ibaraki, Japan"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Suzuki", 
        "givenName": "Hiroshi", 
        "id": "sg:person.012555337103.96", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012555337103.96"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Japan Atomic Energy Agency, Tokai, Ibaraki, Japan", 
          "id": "http://www.grid.ac/institutes/grid.20256.33", 
          "name": [
            "Japan Atomic Energy Agency, Tokai, Ibaraki, Japan"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Morooka", 
        "givenName": "Satoshi", 
        "id": "sg:person.010506172105.53", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010506172105.53"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Japan Power Engineering and Inspection Corporation, Yokohama, Kanagawa, Japan", 
          "id": "http://www.grid.ac/institutes/None", 
          "name": [
            "Japan Power Engineering and Inspection Corporation, Yokohama, Kanagawa, Japan"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Nishikawa", 
        "givenName": "Satoru", 
        "id": "sg:person.013136763617.40", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013136763617.40"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Japan Power Engineering and Inspection Corporation, Yokohama, Kanagawa, Japan", 
          "id": "http://www.grid.ac/institutes/None", 
          "name": [
            "Japan Power Engineering and Inspection Corporation, Yokohama, Kanagawa, Japan"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Furukawa", 
        "givenName": "Takashi", 
        "id": "sg:person.010604540311.48", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010604540311.48"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/s40194-015-0263-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052805334", 
          "https://doi.org/10.1007/s40194-015-0263-y"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2017-02-13", 
    "datePublishedReg": "2017-02-13", 
    "description": "Various peening techniques are employed to prevent stress corrosion cracking or to extend the fatigue life of structures. In this study, to investigate the effect of shot peening on operation, an analysis method that predicts the stress distribution due to shot peening was proposed. Using the proposed method, the load distribution from the shot collisions was modeled, and it was integrated with a dynamic analysis method based on the idealized explicit FEM (IEFEM). The accuracy of the proposed method was confirmed by comparing the stress distribution from the collision of a single shot with the results analyzed using ABAQUS. A thermal elastic-plastic analysis method using IEFEM was applied to the analysis of the residual stress distribution of a multi-pass-welded pipe joint. The calculated residual stress distribution was compared with the measured residual stress distribution measured using X-ray diffraction (XRD). The results showed that the two welding residual distributions were in good agreement. Considering the calculated welding residual stress distribution, the modification of the stress distribution due to shot peening was predicted using the proposed method. A similar stress distribution was obtained using XRD for the case where a large number of collisions were considered.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/s40194-017-0430-4", 
    "isAccessibleForFree": false, 
    "isFundedItemOf": [
      {
        "id": "sg:grant.5904184", 
        "type": "MonetaryGrant"
      }
    ], 
    "isPartOf": [
      {
        "id": "sg:journal.1136492", 
        "issn": [
          "0043-2288", 
          "1878-6669"
        ], 
        "name": "Welding in the World", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "3", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "61"
      }
    ], 
    "keywords": [
      "residual stress distribution", 
      "stress distribution", 
      "X-ray diffraction", 
      "welding residual stress distribution", 
      "elastic-plastic analysis method", 
      "stress corrosion cracking", 
      "effect of shot", 
      "similar stress distribution", 
      "peening techniques", 
      "explicit FEM", 
      "corrosion cracking", 
      "pipe joints", 
      "dynamic analysis method", 
      "fatigue life", 
      "analysis method", 
      "numerical analysis", 
      "load distribution", 
      "peening", 
      "good agreement", 
      "single shot", 
      "ABAQUS", 
      "cracking", 
      "FEM", 
      "shot", 
      "method", 
      "residual distribution", 
      "distribution", 
      "diffraction", 
      "joints", 
      "operation", 
      "collisions", 
      "accuracy", 
      "results", 
      "structure", 
      "agreement", 
      "technique", 
      "process", 
      "large number", 
      "analysis", 
      "modification", 
      "effect", 
      "number", 
      "cases", 
      "study", 
      "life"
    ], 
    "name": "Numerical analysis of residual stress distribution on peening process", 
    "pagination": "517-527", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1083806216"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s40194-017-0430-4"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s40194-017-0430-4", 
      "https://app.dimensions.ai/details/publication/pub.1083806216"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2022-09-02T16:01", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20220902/entities/gbq_results/article/article_745.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/s40194-017-0430-4"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s40194-017-0430-4'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s40194-017-0430-4'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s40194-017-0430-4'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s40194-017-0430-4'


 

This table displays all metadata directly associated to this object as RDF triples.

156 TRIPLES      21 PREDICATES      70 URIs      61 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s40194-017-0430-4 schema:about anzsrc-for:09
2 anzsrc-for:0905
3 schema:author N1e407343b13e42fb9994872c52cd6482
4 schema:citation sg:pub.10.1007/s40194-015-0263-y
5 schema:datePublished 2017-02-13
6 schema:datePublishedReg 2017-02-13
7 schema:description Various peening techniques are employed to prevent stress corrosion cracking or to extend the fatigue life of structures. In this study, to investigate the effect of shot peening on operation, an analysis method that predicts the stress distribution due to shot peening was proposed. Using the proposed method, the load distribution from the shot collisions was modeled, and it was integrated with a dynamic analysis method based on the idealized explicit FEM (IEFEM). The accuracy of the proposed method was confirmed by comparing the stress distribution from the collision of a single shot with the results analyzed using ABAQUS. A thermal elastic-plastic analysis method using IEFEM was applied to the analysis of the residual stress distribution of a multi-pass-welded pipe joint. The calculated residual stress distribution was compared with the measured residual stress distribution measured using X-ray diffraction (XRD). The results showed that the two welding residual distributions were in good agreement. Considering the calculated welding residual stress distribution, the modification of the stress distribution due to shot peening was predicted using the proposed method. A similar stress distribution was obtained using XRD for the case where a large number of collisions were considered.
8 schema:genre article
9 schema:isAccessibleForFree false
10 schema:isPartOf Nd67543521da3410ab59d5f45b618b944
11 Nd856f0130c65431c8ea2cecf22dbd883
12 sg:journal.1136492
13 schema:keywords ABAQUS
14 FEM
15 X-ray diffraction
16 accuracy
17 agreement
18 analysis
19 analysis method
20 cases
21 collisions
22 corrosion cracking
23 cracking
24 diffraction
25 distribution
26 dynamic analysis method
27 effect
28 effect of shot
29 elastic-plastic analysis method
30 explicit FEM
31 fatigue life
32 good agreement
33 joints
34 large number
35 life
36 load distribution
37 method
38 modification
39 number
40 numerical analysis
41 operation
42 peening
43 peening techniques
44 pipe joints
45 process
46 residual distribution
47 residual stress distribution
48 results
49 shot
50 similar stress distribution
51 single shot
52 stress corrosion cracking
53 stress distribution
54 structure
55 study
56 technique
57 welding residual stress distribution
58 schema:name Numerical analysis of residual stress distribution on peening process
59 schema:pagination 517-527
60 schema:productId N2ffaecd3026047748374eb54972bfef5
61 Ne206e242b7ad4cb0a9cd21a589563b49
62 schema:sameAs https://app.dimensions.ai/details/publication/pub.1083806216
63 https://doi.org/10.1007/s40194-017-0430-4
64 schema:sdDatePublished 2022-09-02T16:01
65 schema:sdLicense https://scigraph.springernature.com/explorer/license/
66 schema:sdPublisher Na23e81afb0c441358c72778a96b6b06e
67 schema:url https://doi.org/10.1007/s40194-017-0430-4
68 sgo:license sg:explorer/license/
69 sgo:sdDataset articles
70 rdf:type schema:ScholarlyArticle
71 N1d61cd99bd2a4632b3f8630784dbb211 rdf:first sg:person.012555337103.96
72 rdf:rest N3828ca4d03b54440890f3f6abb73fe4c
73 N1e407343b13e42fb9994872c52cd6482 rdf:first sg:person.07545272163.98
74 rdf:rest Nabe75f12e45742bba0cfcee53e0d1973
75 N2ebbcfd634f642a1a2a1311455c282ea rdf:first sg:person.013136763617.40
76 rdf:rest N542a964e8b2c449e8b1d76be4054835e
77 N2ffaecd3026047748374eb54972bfef5 schema:name doi
78 schema:value 10.1007/s40194-017-0430-4
79 rdf:type schema:PropertyValue
80 N3828ca4d03b54440890f3f6abb73fe4c rdf:first sg:person.010506172105.53
81 rdf:rest N2ebbcfd634f642a1a2a1311455c282ea
82 N542a964e8b2c449e8b1d76be4054835e rdf:first sg:person.010604540311.48
83 rdf:rest rdf:nil
84 N6885739132084c81a55b192693181246 rdf:first sg:person.016232056575.62
85 rdf:rest N1d61cd99bd2a4632b3f8630784dbb211
86 Na23e81afb0c441358c72778a96b6b06e schema:name Springer Nature - SN SciGraph project
87 rdf:type schema:Organization
88 Nabe75f12e45742bba0cfcee53e0d1973 rdf:first sg:person.011237070204.70
89 rdf:rest N6885739132084c81a55b192693181246
90 Nd67543521da3410ab59d5f45b618b944 schema:issueNumber 3
91 rdf:type schema:PublicationIssue
92 Nd856f0130c65431c8ea2cecf22dbd883 schema:volumeNumber 61
93 rdf:type schema:PublicationVolume
94 Ne206e242b7ad4cb0a9cd21a589563b49 schema:name dimensions_id
95 schema:value pub.1083806216
96 rdf:type schema:PropertyValue
97 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
98 schema:name Engineering
99 rdf:type schema:DefinedTerm
100 anzsrc-for:0905 schema:inDefinedTermSet anzsrc-for:
101 schema:name Civil Engineering
102 rdf:type schema:DefinedTerm
103 sg:grant.5904184 http://pending.schema.org/fundedItem sg:pub.10.1007/s40194-017-0430-4
104 rdf:type schema:MonetaryGrant
105 sg:journal.1136492 schema:issn 0043-2288
106 1878-6669
107 schema:name Welding in the World
108 schema:publisher Springer Nature
109 rdf:type schema:Periodical
110 sg:person.010506172105.53 schema:affiliation grid-institutes:grid.20256.33
111 schema:familyName Morooka
112 schema:givenName Satoshi
113 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010506172105.53
114 rdf:type schema:Person
115 sg:person.010604540311.48 schema:affiliation grid-institutes:None
116 schema:familyName Furukawa
117 schema:givenName Takashi
118 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010604540311.48
119 rdf:type schema:Person
120 sg:person.011237070204.70 schema:affiliation grid-institutes:grid.261455.1
121 schema:familyName Shibahara
122 schema:givenName Masakazu
123 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011237070204.70
124 rdf:type schema:Person
125 sg:person.012555337103.96 schema:affiliation grid-institutes:grid.20256.33
126 schema:familyName Suzuki
127 schema:givenName Hiroshi
128 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012555337103.96
129 rdf:type schema:Person
130 sg:person.013136763617.40 schema:affiliation grid-institutes:None
131 schema:familyName Nishikawa
132 schema:givenName Satoru
133 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013136763617.40
134 rdf:type schema:Person
135 sg:person.016232056575.62 schema:affiliation grid-institutes:grid.20256.33
136 schema:familyName Akita
137 schema:givenName Koichi
138 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016232056575.62
139 rdf:type schema:Person
140 sg:person.07545272163.98 schema:affiliation grid-institutes:grid.261455.1
141 schema:familyName Ikushima
142 schema:givenName Kazuki
143 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07545272163.98
144 rdf:type schema:Person
145 sg:pub.10.1007/s40194-015-0263-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1052805334
146 https://doi.org/10.1007/s40194-015-0263-y
147 rdf:type schema:CreativeWork
148 grid-institutes:None schema:alternateName Japan Power Engineering and Inspection Corporation, Yokohama, Kanagawa, Japan
149 schema:name Japan Power Engineering and Inspection Corporation, Yokohama, Kanagawa, Japan
150 rdf:type schema:Organization
151 grid-institutes:grid.20256.33 schema:alternateName Japan Atomic Energy Agency, Tokai, Ibaraki, Japan
152 schema:name Japan Atomic Energy Agency, Tokai, Ibaraki, Japan
153 rdf:type schema:Organization
154 grid-institutes:grid.261455.1 schema:alternateName Osaka Prefecture University, Sakai, Osaka, Japan
155 schema:name Osaka Prefecture University, Sakai, Osaka, Japan
156 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...