(FeMnNi)84(AlTi)16 High-Entropy Alloy: Correlation of Microstructure, Strengthening Mechanisms and Hardness at Various Conditions (As-Cast, Solution Treated, Aged) View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2022-04

AUTHORS

K. Konakoglou, C. Mathiou, E. Georgatis, K. Georgarakis, A. E. Karantzalis

ABSTRACT

A (FeMnNi)84(AlTi)16 high-entropy alloy was produced by vacuum arc melting successfully. The microstructure of the as-cast state showed the existence of two FCC phases along with potential precipitates. The solution treatment response of the alloy for 2 h at 1150 °C and the effect of aging time at 750 °C in the microstructure and microhardness were also evaluated. It was observed that the solution treatment parameters were insufficiently low to dissolve the as-cast precipitates into the matrix. The double FCC matrix identified may be correlated with a solidification range and insufficient diffusion during the solidification process. The maximum hardness at 90 min aging time can be mainly attributed to the precipitation shearing mechanism in both matrix areas. The lower hardness value reported at 160 h aging time was estimated that it is derived by the change of the main strengthening mechanism from shearing to Orowan. The island-like precipitates that depleted Ti element from the Ni-rich intergranular area may be identified as a Ni2AlTi Heusler phase. More... »

PAGES

309-326

References to SciGraph publications

  • 2012-11-07. Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2003-06. Precipitation of heusler phase (Ni2TiAl) from B2-TiNi in Ni-Ti-Al and Ni-Ti-Al-X (X=Hf, Zr) alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2015-06-12. High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy) in JOM
  • 2008-12-01. Correlation of Yield Strength and Tensile Strength with Hardness for Steels in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2018-06-22. L12-strengthened high-entropy alloys for advanced structural applications in JOURNAL OF MATERIALS RESEARCH
  • 2016-05-18. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off in NATURE
  • 2016. High-Entropy Alloys, Fundamentals and Applications in NONE
  • 2017-10-04. The High Temperature Tensile and Creep Behaviors of High Entropy Superalloy in SCIENTIFIC REPORTS
  • 2013-08-06. Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design in JOURNAL OF MATERIALS RESEARCH
  • 2020-07-22. Hierarchical microstructure strengthening in a single crystal high entropy superalloy in SCIENTIFIC REPORTS
  • 2017-04-10. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation in NATURE
  • 2013-03-15. High-entropy Alloys with High Saturation Magnetization, Electrical Resistivity and Malleability in SCIENTIFIC REPORTS
  • 2019. High-Entropy Materials, A Brief Introduction in NONE
  • 2011-10-24. The conflicts between strength and toughness in NATURE MATERIALS
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s13632-022-00846-x

    DOI

    http://dx.doi.org/10.1007/s13632-022-00846-x

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1147555428


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Sustainable Manufacturing Systems Centre, Cranfield University, Cranfield, UK", 
              "id": "http://www.grid.ac/institutes/grid.12026.37", 
              "name": [
                "Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece", 
                "Sustainable Manufacturing Systems Centre, Cranfield University, Cranfield, UK"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Konakoglou", 
            "givenName": "K.", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece", 
              "id": "http://www.grid.ac/institutes/grid.9594.1", 
              "name": [
                "Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Mathiou", 
            "givenName": "C.", 
            "id": "sg:person.013457215036.12", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013457215036.12"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece", 
              "id": "http://www.grid.ac/institutes/grid.9594.1", 
              "name": [
                "Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Georgatis", 
            "givenName": "E.", 
            "id": "sg:person.011402202402.40", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011402202402.40"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Sustainable Manufacturing Systems Centre, Cranfield University, Cranfield, UK", 
              "id": "http://www.grid.ac/institutes/grid.12026.37", 
              "name": [
                "Sustainable Manufacturing Systems Centre, Cranfield University, Cranfield, UK"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Georgarakis", 
            "givenName": "K.", 
            "id": "sg:person.013300244736.48", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013300244736.48"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece", 
              "id": "http://www.grid.ac/institutes/grid.9594.1", 
              "name": [
                "Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Karantzalis", 
            "givenName": "A. E.", 
            "id": "sg:person.011400104321.54", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011400104321.54"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/s11665-008-9225-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042407163", 
              "https://doi.org/10.1007/s11665-008-9225-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/nature17981", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045635826", 
              "https://doi.org/10.1038/nature17981"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/nmat3115", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004166204", 
              "https://doi.org/10.1038/nmat3115"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1557/jmr.2013.211", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014500008", 
              "https://doi.org/10.1557/jmr.2013.211"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/s41598-020-69257-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1129529406", 
              "https://doi.org/10.1038/s41598-020-69257-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/srep01455", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049410365", 
              "https://doi.org/10.1038/srep01455"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/nature22032", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084743453", 
              "https://doi.org/10.1038/nature22032"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1557/jmr.2018.186", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1105075291", 
              "https://doi.org/10.1557/jmr.2018.186"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-981-13-8526-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1115926489", 
              "https://doi.org/10.1007/978-981-13-8526-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11837-015-1484-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014806925", 
              "https://doi.org/10.1007/s11837-015-1484-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-003-0233-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036578636", 
              "https://doi.org/10.1007/s11661-003-0233-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-3-319-27013-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042914275", 
              "https://doi.org/10.1007/978-3-319-27013-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/s41598-017-13026-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1092023329", 
              "https://doi.org/10.1038/s41598-017-13026-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-012-1474-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016285329", 
              "https://doi.org/10.1007/s11661-012-1474-0"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2022-04", 
        "datePublishedReg": "2022-04-01", 
        "description": "A (FeMnNi)84(AlTi)16 high-entropy alloy was produced by vacuum arc melting successfully. The microstructure of the as-cast state showed the existence of two FCC phases along with potential precipitates. The solution treatment response of the alloy for 2\u00a0h at 1150\u00a0\u00b0C and the effect of aging time at 750\u00a0\u00b0C in the microstructure and microhardness were also evaluated. It was observed that the solution treatment parameters were insufficiently low to dissolve the as-cast precipitates into the matrix. The double FCC matrix identified may be correlated with a solidification range and insufficient diffusion during the solidification process. The maximum hardness at 90\u00a0min aging time can be mainly attributed to the precipitation shearing mechanism in both matrix areas. The lower hardness value reported at 160\u00a0h aging time was estimated that it is derived by the change of the main strengthening mechanism from shearing to Orowan. The island-like precipitates that depleted Ti element from the Ni-rich intergranular area may be identified as a Ni2AlTi Heusler phase.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/s13632-022-00846-x", 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136434", 
            "issn": [
              "2192-9262", 
              "2192-9270"
            ], 
            "name": "Metallography, Microstructure, and Analysis", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "2", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "11"
          }
        ], 
        "keywords": [
          "high-entropy alloys", 
          "solution treatment response", 
          "solution treatment parameters", 
          "main strengthening mechanism", 
          "vacuum arc melting", 
          "Correlation of microstructure", 
          "lower hardness values", 
          "strengthening mechanism", 
          "cast state", 
          "solidification range", 
          "solidification process", 
          "FCC matrix", 
          "maximum hardness", 
          "hardness values", 
          "Ti element", 
          "arc melting", 
          "intergranular areas", 
          "shearing mechanism", 
          "fcc phase", 
          "Heusler phase", 
          "alloy", 
          "microstructure", 
          "insufficient diffusion", 
          "hardness", 
          "precipitates", 
          "potential precipitates", 
          "treatment parameters", 
          "matrix area", 
          "Orowan", 
          "microhardness", 
          "matrix", 
          "phase", 
          "diffusion", 
          "melting", 
          "parameters", 
          "time", 
          "range", 
          "process", 
          "conditions", 
          "area", 
          "mechanism", 
          "elements", 
          "values", 
          "min", 
          "effect", 
          "state", 
          "changes", 
          "response", 
          "correlation", 
          "existence", 
          "treatment response"
        ], 
        "name": "(FeMnNi)84(AlTi)16 High-Entropy Alloy: Correlation of Microstructure, Strengthening Mechanisms and Hardness at Various Conditions (As-Cast, Solution Treated, Aged)", 
        "pagination": "309-326", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1147555428"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s13632-022-00846-x"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s13632-022-00846-x", 
          "https://app.dimensions.ai/details/publication/pub.1147555428"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-10-01T06:50", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20221001/entities/gbq_results/article/article_936.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/s13632-022-00846-x"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s13632-022-00846-x'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s13632-022-00846-x'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s13632-022-00846-x'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s13632-022-00846-x'


     

    This table displays all metadata directly associated to this object as RDF triples.

    195 TRIPLES      21 PREDICATES      90 URIs      68 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s13632-022-00846-x schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author Nba79b951ca53404799bb2966e6f8f66f
    4 schema:citation sg:pub.10.1007/978-3-319-27013-5
    5 sg:pub.10.1007/978-981-13-8526-1
    6 sg:pub.10.1007/s11661-003-0233-7
    7 sg:pub.10.1007/s11661-012-1474-0
    8 sg:pub.10.1007/s11665-008-9225-5
    9 sg:pub.10.1007/s11837-015-1484-7
    10 sg:pub.10.1038/nature17981
    11 sg:pub.10.1038/nature22032
    12 sg:pub.10.1038/nmat3115
    13 sg:pub.10.1038/s41598-017-13026-7
    14 sg:pub.10.1038/s41598-020-69257-8
    15 sg:pub.10.1038/srep01455
    16 sg:pub.10.1557/jmr.2013.211
    17 sg:pub.10.1557/jmr.2018.186
    18 schema:datePublished 2022-04
    19 schema:datePublishedReg 2022-04-01
    20 schema:description A (FeMnNi)84(AlTi)16 high-entropy alloy was produced by vacuum arc melting successfully. The microstructure of the as-cast state showed the existence of two FCC phases along with potential precipitates. The solution treatment response of the alloy for 2 h at 1150 °C and the effect of aging time at 750 °C in the microstructure and microhardness were also evaluated. It was observed that the solution treatment parameters were insufficiently low to dissolve the as-cast precipitates into the matrix. The double FCC matrix identified may be correlated with a solidification range and insufficient diffusion during the solidification process. The maximum hardness at 90 min aging time can be mainly attributed to the precipitation shearing mechanism in both matrix areas. The lower hardness value reported at 160 h aging time was estimated that it is derived by the change of the main strengthening mechanism from shearing to Orowan. The island-like precipitates that depleted Ti element from the Ni-rich intergranular area may be identified as a Ni2AlTi Heusler phase.
    21 schema:genre article
    22 schema:isAccessibleForFree false
    23 schema:isPartOf N4309e9eceb82472db7b27602ad08323a
    24 N4fee18e7e0cb4acba5a4bed4fff4dfc4
    25 sg:journal.1136434
    26 schema:keywords Correlation of microstructure
    27 FCC matrix
    28 Heusler phase
    29 Orowan
    30 Ti element
    31 alloy
    32 arc melting
    33 area
    34 cast state
    35 changes
    36 conditions
    37 correlation
    38 diffusion
    39 effect
    40 elements
    41 existence
    42 fcc phase
    43 hardness
    44 hardness values
    45 high-entropy alloys
    46 insufficient diffusion
    47 intergranular areas
    48 lower hardness values
    49 main strengthening mechanism
    50 matrix
    51 matrix area
    52 maximum hardness
    53 mechanism
    54 melting
    55 microhardness
    56 microstructure
    57 min
    58 parameters
    59 phase
    60 potential precipitates
    61 precipitates
    62 process
    63 range
    64 response
    65 shearing mechanism
    66 solidification process
    67 solidification range
    68 solution treatment parameters
    69 solution treatment response
    70 state
    71 strengthening mechanism
    72 time
    73 treatment parameters
    74 treatment response
    75 vacuum arc melting
    76 values
    77 schema:name (FeMnNi)84(AlTi)16 High-Entropy Alloy: Correlation of Microstructure, Strengthening Mechanisms and Hardness at Various Conditions (As-Cast, Solution Treated, Aged)
    78 schema:pagination 309-326
    79 schema:productId Nd23260c01fee4e04951bca801e5c200a
    80 Neab95e2004f14072962a3b53d72e3330
    81 schema:sameAs https://app.dimensions.ai/details/publication/pub.1147555428
    82 https://doi.org/10.1007/s13632-022-00846-x
    83 schema:sdDatePublished 2022-10-01T06:50
    84 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    85 schema:sdPublisher N660c70861f85465d8e31c78bb68b751d
    86 schema:url https://doi.org/10.1007/s13632-022-00846-x
    87 sgo:license sg:explorer/license/
    88 sgo:sdDataset articles
    89 rdf:type schema:ScholarlyArticle
    90 N1a7e4771a5c84f11bef49e0d798297fb rdf:first sg:person.011402202402.40
    91 rdf:rest N8fb5426700ec42258da157349ad70158
    92 N4309e9eceb82472db7b27602ad08323a schema:issueNumber 2
    93 rdf:type schema:PublicationIssue
    94 N4d46a6f1d25b4cbfac999426546c9248 rdf:first sg:person.013457215036.12
    95 rdf:rest N1a7e4771a5c84f11bef49e0d798297fb
    96 N4fee18e7e0cb4acba5a4bed4fff4dfc4 schema:volumeNumber 11
    97 rdf:type schema:PublicationVolume
    98 N62d1c27393eb40cc99db4df3fb107407 schema:affiliation grid-institutes:grid.12026.37
    99 schema:familyName Konakoglou
    100 schema:givenName K.
    101 rdf:type schema:Person
    102 N660c70861f85465d8e31c78bb68b751d schema:name Springer Nature - SN SciGraph project
    103 rdf:type schema:Organization
    104 N8fb5426700ec42258da157349ad70158 rdf:first sg:person.013300244736.48
    105 rdf:rest N92c9b9385c764abd92492f906bb82fa1
    106 N92c9b9385c764abd92492f906bb82fa1 rdf:first sg:person.011400104321.54
    107 rdf:rest rdf:nil
    108 Nba79b951ca53404799bb2966e6f8f66f rdf:first N62d1c27393eb40cc99db4df3fb107407
    109 rdf:rest N4d46a6f1d25b4cbfac999426546c9248
    110 Nd23260c01fee4e04951bca801e5c200a schema:name dimensions_id
    111 schema:value pub.1147555428
    112 rdf:type schema:PropertyValue
    113 Neab95e2004f14072962a3b53d72e3330 schema:name doi
    114 schema:value 10.1007/s13632-022-00846-x
    115 rdf:type schema:PropertyValue
    116 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    117 schema:name Engineering
    118 rdf:type schema:DefinedTerm
    119 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    120 schema:name Materials Engineering
    121 rdf:type schema:DefinedTerm
    122 sg:journal.1136434 schema:issn 2192-9262
    123 2192-9270
    124 schema:name Metallography, Microstructure, and Analysis
    125 schema:publisher Springer Nature
    126 rdf:type schema:Periodical
    127 sg:person.011400104321.54 schema:affiliation grid-institutes:grid.9594.1
    128 schema:familyName Karantzalis
    129 schema:givenName A. E.
    130 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011400104321.54
    131 rdf:type schema:Person
    132 sg:person.011402202402.40 schema:affiliation grid-institutes:grid.9594.1
    133 schema:familyName Georgatis
    134 schema:givenName E.
    135 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011402202402.40
    136 rdf:type schema:Person
    137 sg:person.013300244736.48 schema:affiliation grid-institutes:grid.12026.37
    138 schema:familyName Georgarakis
    139 schema:givenName K.
    140 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013300244736.48
    141 rdf:type schema:Person
    142 sg:person.013457215036.12 schema:affiliation grid-institutes:grid.9594.1
    143 schema:familyName Mathiou
    144 schema:givenName C.
    145 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013457215036.12
    146 rdf:type schema:Person
    147 sg:pub.10.1007/978-3-319-27013-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042914275
    148 https://doi.org/10.1007/978-3-319-27013-5
    149 rdf:type schema:CreativeWork
    150 sg:pub.10.1007/978-981-13-8526-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1115926489
    151 https://doi.org/10.1007/978-981-13-8526-1
    152 rdf:type schema:CreativeWork
    153 sg:pub.10.1007/s11661-003-0233-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036578636
    154 https://doi.org/10.1007/s11661-003-0233-7
    155 rdf:type schema:CreativeWork
    156 sg:pub.10.1007/s11661-012-1474-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016285329
    157 https://doi.org/10.1007/s11661-012-1474-0
    158 rdf:type schema:CreativeWork
    159 sg:pub.10.1007/s11665-008-9225-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042407163
    160 https://doi.org/10.1007/s11665-008-9225-5
    161 rdf:type schema:CreativeWork
    162 sg:pub.10.1007/s11837-015-1484-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014806925
    163 https://doi.org/10.1007/s11837-015-1484-7
    164 rdf:type schema:CreativeWork
    165 sg:pub.10.1038/nature17981 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045635826
    166 https://doi.org/10.1038/nature17981
    167 rdf:type schema:CreativeWork
    168 sg:pub.10.1038/nature22032 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084743453
    169 https://doi.org/10.1038/nature22032
    170 rdf:type schema:CreativeWork
    171 sg:pub.10.1038/nmat3115 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004166204
    172 https://doi.org/10.1038/nmat3115
    173 rdf:type schema:CreativeWork
    174 sg:pub.10.1038/s41598-017-13026-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1092023329
    175 https://doi.org/10.1038/s41598-017-13026-7
    176 rdf:type schema:CreativeWork
    177 sg:pub.10.1038/s41598-020-69257-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1129529406
    178 https://doi.org/10.1038/s41598-020-69257-8
    179 rdf:type schema:CreativeWork
    180 sg:pub.10.1038/srep01455 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049410365
    181 https://doi.org/10.1038/srep01455
    182 rdf:type schema:CreativeWork
    183 sg:pub.10.1557/jmr.2013.211 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014500008
    184 https://doi.org/10.1557/jmr.2013.211
    185 rdf:type schema:CreativeWork
    186 sg:pub.10.1557/jmr.2018.186 schema:sameAs https://app.dimensions.ai/details/publication/pub.1105075291
    187 https://doi.org/10.1557/jmr.2018.186
    188 rdf:type schema:CreativeWork
    189 grid-institutes:grid.12026.37 schema:alternateName Sustainable Manufacturing Systems Centre, Cranfield University, Cranfield, UK
    190 schema:name Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece
    191 Sustainable Manufacturing Systems Centre, Cranfield University, Cranfield, UK
    192 rdf:type schema:Organization
    193 grid-institutes:grid.9594.1 schema:alternateName Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece
    194 schema:name Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece
    195 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...