An Experimental Work on Tool Wear Affected by Die Clearance and Punch Hardness View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2017-11

AUTHORS

Ferhat Akyürek, Kemal Yaman, Zafer Tekiner

ABSTRACT

Die clearance is a widely known parameter affecting both tool life and edge quality of parts in blanking operations. Selecting the optimum punch–die clearance can give a longer tool life and better product quality by minimizing tool wear. In experimental studies, the effects of cutting die clearance and punch hardness on the punch edge and face wear were investigated. AISI D2 cold work steel with 50, 55 and 60 HRC-hardness punches was used as tool material. Three different cutting die clearances 3, 5 and 8% of sheet thickness were used. A modular punch–die set was prepared, and 2000, 4000, 6000 and 8000 samples are pressed. The results of the experiments showed that the punch edge and face wear decreased with increasing punch hardness and that smooth-sheared parts are strongly dependent on the clearance. More... »

PAGES

4683-4692

References to SciGraph publications

  • 2003-09. Prediction of optimum clearance in sheet metal blanking processes in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2010-09. An experimental analysis of effects of various material tool’s wear on burr during generator sheets blanking in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2016-10. Punch structure, punch wear and cut profiles of AISI 304 stainless steel sheet blanks manufactured using cryogenically treated AISI D3 tool steel punches in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2014-06. Effect of clearance and inclined angle on sheared edge and tool failure in trimming of DP980 sheet in JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
  • 2013-03. Study of the punch–die clearance influence on the sheared edge quality of thick sheets in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s13369-017-2621-0

    DOI

    http://dx.doi.org/10.1007/s13369-017-2621-0

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1085609081


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Scientific and Technological Research Council of Turkey", 
              "id": "https://www.grid.ac/institutes/grid.426409.d", 
              "name": [
                "The Scientific and Technical Research Council of Turkey-Defense Industries Research and Development Institute (TUB\u0130TAK-SAGE), 06261, Ankara, Turkey"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Aky\u00fcrek", 
            "givenName": "Ferhat", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Scientific and Technological Research Council of Turkey", 
              "id": "https://www.grid.ac/institutes/grid.426409.d", 
              "name": [
                "The Scientific and Technical Research Council of Turkey-Defense Industries Research and Development Institute (TUB\u0130TAK-SAGE), 06261, Ankara, Turkey"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Yaman", 
            "givenName": "Kemal", 
            "id": "sg:person.010346224633.11", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010346224633.11"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Gazi University", 
              "id": "https://www.grid.ac/institutes/grid.25769.3f", 
              "name": [
                "Department of Manufacturing Engineering, Technology Faculty, Gazi University, 06570, Be\u015fevler, Ankara, Turkey"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Tekiner", 
            "givenName": "Zafer", 
            "id": "sg:person.012141472423.05", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012141472423.05"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2013.09.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000800014"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-016-8515-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004042798", 
              "https://doi.org/10.1007/s00170-016-8515-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-002-1437-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009753569", 
              "https://doi.org/10.1007/s00170-002-1437-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(03)00762-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017015222"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(03)00762-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017015222"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2013.11.016", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017474418"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-012-4184-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018743890", 
              "https://doi.org/10.1007/s00170-012-4184-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-010-2554-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019719759", 
              "https://doi.org/10.1007/s00170-010-2554-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-010-2554-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019719759", 
              "https://doi.org/10.1007/s00170-010-2554-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(98)00375-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021918106"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2005.03.013", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025410872"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12206-014-0522-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028398894", 
              "https://doi.org/10.1007/s12206-014-0522-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1296-2139(03)00035-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030018662"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1296-2139(03)00035-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030018662"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(98)00181-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1034010823"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmatprotec.2006.05.015", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037023314"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmatprotec.2011.10.021", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038496994"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(99)00486-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040129051"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.wear.2010.07.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041431279"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(02)00056-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044037448"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(02)00767-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044528303"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(02)00767-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044528303"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0043-1648(96)07439-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051021076"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.4026273", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062151589"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2017-11", 
        "datePublishedReg": "2017-11-01", 
        "description": "Die clearance is a widely known parameter affecting both tool life and edge quality of parts in blanking operations. Selecting the optimum punch\u2013die clearance can give a longer tool life and better product quality by minimizing tool wear. In experimental studies, the effects of cutting die clearance and punch hardness on the punch edge and face wear were investigated. AISI D2 cold work steel with 50, 55 and 60 HRC-hardness punches was used as tool material. Three different cutting die clearances 3, 5 and 8% of sheet thickness were used. A modular punch\u2013die set was prepared, and 2000, 4000, 6000 and 8000 samples are pressed. The results of the experiments showed that the punch edge and face wear decreased with increasing punch hardness and that smooth-sheared parts are strongly dependent on the clearance.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s13369-017-2621-0", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136851", 
            "issn": [
              "2193-567X", 
              "2191-4281"
            ], 
            "name": "Arabian Journal for Science and Engineering", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "11", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "42"
          }
        ], 
        "name": "An Experimental Work on Tool Wear Affected by Die Clearance and Punch Hardness", 
        "pagination": "4683-4692", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "e8d6b0d65ca897e6d6e10a46dc091fee75496447307130f8d08b7a7d3fdcba1e"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s13369-017-2621-0"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1085609081"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s13369-017-2621-0", 
          "https://app.dimensions.ai/details/publication/pub.1085609081"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T10:33", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000349_0000000349/records_113658_00000004.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://link.springer.com/10.1007%2Fs13369-017-2621-0"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s13369-017-2621-0'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s13369-017-2621-0'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s13369-017-2621-0'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s13369-017-2621-0'


     

    This table displays all metadata directly associated to this object as RDF triples.

    142 TRIPLES      21 PREDICATES      47 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s13369-017-2621-0 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N34c6d82943c14acc9ad4161ee5c2869a
    4 schema:citation sg:pub.10.1007/s00170-002-1437-5
    5 sg:pub.10.1007/s00170-010-2554-1
    6 sg:pub.10.1007/s00170-012-4184-2
    7 sg:pub.10.1007/s00170-016-8515-6
    8 sg:pub.10.1007/s12206-014-0522-7
    9 https://doi.org/10.1016/j.ijmachtools.2013.09.004
    10 https://doi.org/10.1016/j.jmatprotec.2006.05.015
    11 https://doi.org/10.1016/j.jmatprotec.2011.10.021
    12 https://doi.org/10.1016/j.matdes.2005.03.013
    13 https://doi.org/10.1016/j.matdes.2013.11.016
    14 https://doi.org/10.1016/j.wear.2010.07.004
    15 https://doi.org/10.1016/s0043-1648(96)07439-x
    16 https://doi.org/10.1016/s0924-0136(02)00056-0
    17 https://doi.org/10.1016/s0924-0136(02)00767-7
    18 https://doi.org/10.1016/s0924-0136(03)00762-3
    19 https://doi.org/10.1016/s0924-0136(98)00181-2
    20 https://doi.org/10.1016/s0924-0136(98)00375-6
    21 https://doi.org/10.1016/s0924-0136(99)00486-0
    22 https://doi.org/10.1016/s1296-2139(03)00035-6
    23 https://doi.org/10.1115/1.4026273
    24 schema:datePublished 2017-11
    25 schema:datePublishedReg 2017-11-01
    26 schema:description Die clearance is a widely known parameter affecting both tool life and edge quality of parts in blanking operations. Selecting the optimum punch–die clearance can give a longer tool life and better product quality by minimizing tool wear. In experimental studies, the effects of cutting die clearance and punch hardness on the punch edge and face wear were investigated. AISI D2 cold work steel with 50, 55 and 60 HRC-hardness punches was used as tool material. Three different cutting die clearances 3, 5 and 8% of sheet thickness were used. A modular punch–die set was prepared, and 2000, 4000, 6000 and 8000 samples are pressed. The results of the experiments showed that the punch edge and face wear decreased with increasing punch hardness and that smooth-sheared parts are strongly dependent on the clearance.
    27 schema:genre research_article
    28 schema:inLanguage en
    29 schema:isAccessibleForFree false
    30 schema:isPartOf N97dbdaa026f34638b71759c4f8f12993
    31 Na36b41a8d3d64043b656068306a925ce
    32 sg:journal.1136851
    33 schema:name An Experimental Work on Tool Wear Affected by Die Clearance and Punch Hardness
    34 schema:pagination 4683-4692
    35 schema:productId N6d23eae3c6b847dc8bdf4d98ee40fd60
    36 Naaafbc9ab8854612b3a18508f46a1012
    37 Nfc9d0d60ed4c41ed8879640aa25d456e
    38 schema:sameAs https://app.dimensions.ai/details/publication/pub.1085609081
    39 https://doi.org/10.1007/s13369-017-2621-0
    40 schema:sdDatePublished 2019-04-11T10:33
    41 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    42 schema:sdPublisher N3be75c72010c453a9370801bd2b94b5f
    43 schema:url https://link.springer.com/10.1007%2Fs13369-017-2621-0
    44 sgo:license sg:explorer/license/
    45 sgo:sdDataset articles
    46 rdf:type schema:ScholarlyArticle
    47 N34c6d82943c14acc9ad4161ee5c2869a rdf:first Ne1be9cf459d54dd49382f1f59a1f156e
    48 rdf:rest Na821364951c14550b0bb48d87babf71b
    49 N3be75c72010c453a9370801bd2b94b5f schema:name Springer Nature - SN SciGraph project
    50 rdf:type schema:Organization
    51 N6d23eae3c6b847dc8bdf4d98ee40fd60 schema:name readcube_id
    52 schema:value e8d6b0d65ca897e6d6e10a46dc091fee75496447307130f8d08b7a7d3fdcba1e
    53 rdf:type schema:PropertyValue
    54 N97dbdaa026f34638b71759c4f8f12993 schema:issueNumber 11
    55 rdf:type schema:PublicationIssue
    56 Na36b41a8d3d64043b656068306a925ce schema:volumeNumber 42
    57 rdf:type schema:PublicationVolume
    58 Na821364951c14550b0bb48d87babf71b rdf:first sg:person.010346224633.11
    59 rdf:rest Ndf8fcb34e69c4cbc8ff9f55a8e8900ab
    60 Naaafbc9ab8854612b3a18508f46a1012 schema:name dimensions_id
    61 schema:value pub.1085609081
    62 rdf:type schema:PropertyValue
    63 Ndf8fcb34e69c4cbc8ff9f55a8e8900ab rdf:first sg:person.012141472423.05
    64 rdf:rest rdf:nil
    65 Ne1be9cf459d54dd49382f1f59a1f156e schema:affiliation https://www.grid.ac/institutes/grid.426409.d
    66 schema:familyName Akyürek
    67 schema:givenName Ferhat
    68 rdf:type schema:Person
    69 Nfc9d0d60ed4c41ed8879640aa25d456e schema:name doi
    70 schema:value 10.1007/s13369-017-2621-0
    71 rdf:type schema:PropertyValue
    72 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    73 schema:name Engineering
    74 rdf:type schema:DefinedTerm
    75 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    76 schema:name Materials Engineering
    77 rdf:type schema:DefinedTerm
    78 sg:journal.1136851 schema:issn 2191-4281
    79 2193-567X
    80 schema:name Arabian Journal for Science and Engineering
    81 rdf:type schema:Periodical
    82 sg:person.010346224633.11 schema:affiliation https://www.grid.ac/institutes/grid.426409.d
    83 schema:familyName Yaman
    84 schema:givenName Kemal
    85 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010346224633.11
    86 rdf:type schema:Person
    87 sg:person.012141472423.05 schema:affiliation https://www.grid.ac/institutes/grid.25769.3f
    88 schema:familyName Tekiner
    89 schema:givenName Zafer
    90 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012141472423.05
    91 rdf:type schema:Person
    92 sg:pub.10.1007/s00170-002-1437-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009753569
    93 https://doi.org/10.1007/s00170-002-1437-5
    94 rdf:type schema:CreativeWork
    95 sg:pub.10.1007/s00170-010-2554-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019719759
    96 https://doi.org/10.1007/s00170-010-2554-1
    97 rdf:type schema:CreativeWork
    98 sg:pub.10.1007/s00170-012-4184-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018743890
    99 https://doi.org/10.1007/s00170-012-4184-2
    100 rdf:type schema:CreativeWork
    101 sg:pub.10.1007/s00170-016-8515-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004042798
    102 https://doi.org/10.1007/s00170-016-8515-6
    103 rdf:type schema:CreativeWork
    104 sg:pub.10.1007/s12206-014-0522-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028398894
    105 https://doi.org/10.1007/s12206-014-0522-7
    106 rdf:type schema:CreativeWork
    107 https://doi.org/10.1016/j.ijmachtools.2013.09.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000800014
    108 rdf:type schema:CreativeWork
    109 https://doi.org/10.1016/j.jmatprotec.2006.05.015 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037023314
    110 rdf:type schema:CreativeWork
    111 https://doi.org/10.1016/j.jmatprotec.2011.10.021 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038496994
    112 rdf:type schema:CreativeWork
    113 https://doi.org/10.1016/j.matdes.2005.03.013 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025410872
    114 rdf:type schema:CreativeWork
    115 https://doi.org/10.1016/j.matdes.2013.11.016 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017474418
    116 rdf:type schema:CreativeWork
    117 https://doi.org/10.1016/j.wear.2010.07.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041431279
    118 rdf:type schema:CreativeWork
    119 https://doi.org/10.1016/s0043-1648(96)07439-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1051021076
    120 rdf:type schema:CreativeWork
    121 https://doi.org/10.1016/s0924-0136(02)00056-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044037448
    122 rdf:type schema:CreativeWork
    123 https://doi.org/10.1016/s0924-0136(02)00767-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044528303
    124 rdf:type schema:CreativeWork
    125 https://doi.org/10.1016/s0924-0136(03)00762-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017015222
    126 rdf:type schema:CreativeWork
    127 https://doi.org/10.1016/s0924-0136(98)00181-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034010823
    128 rdf:type schema:CreativeWork
    129 https://doi.org/10.1016/s0924-0136(98)00375-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021918106
    130 rdf:type schema:CreativeWork
    131 https://doi.org/10.1016/s0924-0136(99)00486-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040129051
    132 rdf:type schema:CreativeWork
    133 https://doi.org/10.1016/s1296-2139(03)00035-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030018662
    134 rdf:type schema:CreativeWork
    135 https://doi.org/10.1115/1.4026273 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062151589
    136 rdf:type schema:CreativeWork
    137 https://www.grid.ac/institutes/grid.25769.3f schema:alternateName Gazi University
    138 schema:name Department of Manufacturing Engineering, Technology Faculty, Gazi University, 06570, Beşevler, Ankara, Turkey
    139 rdf:type schema:Organization
    140 https://www.grid.ac/institutes/grid.426409.d schema:alternateName Scientific and Technological Research Council of Turkey
    141 schema:name The Scientific and Technical Research Council of Turkey-Defense Industries Research and Development Institute (TUBİTAK-SAGE), 06261, Ankara, Turkey
    142 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...