Mechanical properties of squeeze-cast Al–7Si–0.3Mg alloys with Sc-modified Fe-rich intermetallic compounds View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2018-09

AUTHORS

Kittisak Chanyathunyaroj, Ussadawut Patakham, Sindo Kou, Chaowalit Limmaneevichitr

ABSTRACT

Iron (Fe) has a low solid solubility in aluminum (Al), and it usually forms Fe-rich intermetallic compounds. Scandium (Sc) is an element that can act as a grain refiner, modify the eutectic silicon and change the morphology of Fe-rich intermetallic compounds at the same time. The present work was conducted to study the effect of Sc on the mechanical properties of Al–7Si–0.3Mg. The alloy was prepared by squeeze casting at two levels of Fe (0.2 and 0.4 wt%) and three levels of Sc (0 wt%, 0.2 wt% and 0.4 wt%). Sc is found to increase the mechanical properties of the alloy, including its hardness, yield strength and ultimate tensile strength. At 0.2 wt% Fe, adding Sc increases the strength while maintaining good elongation. At 0.4 wt% Fe, adding Sc increases the strength but decreases the elongation slightly. The distributions and morphologies of intermetallic compounds and eutectic silicon affect the elongation. Both Fe-rich intermetallic compounds and Sc-rich intermetallic compounds act as crack initiation sites. The 0.2 wt% Fe + 0.2 wt% Sc alloy has the lowest amount of these intermetallic compounds, and eutectic silicon is small and fibrous. So, it has the highest elongation. More... »

PAGES

769-777

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s12598-017-0970-1

DOI

http://dx.doi.org/10.1007/s12598-017-0970-1

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1092348854


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "King Mongkut's University of Technology Thonburi", 
          "id": "https://www.grid.ac/institutes/grid.412151.2", 
          "name": [
            "Production Engineering Department, Faculty of Engineering, King Mongkut\u2019s University of Technology Thonburi, 10140, Bangkok, Thailand"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Chanyathunyaroj", 
        "givenName": "Kittisak", 
        "id": "sg:person.016244617517.88", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016244617517.88"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Thailand National Metal and Materials Technology Center", 
          "id": "https://www.grid.ac/institutes/grid.466918.4", 
          "name": [
            "National Metal and Materials Technology Center, National Science and Technology Development Agency, 12120, Khlong Nueng, Pathumthani, Thailand"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Patakham", 
        "givenName": "Ussadawut", 
        "id": "sg:person.01303165437.60", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01303165437.60"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "University of Wisconsin\u2013Madison", 
          "id": "https://www.grid.ac/institutes/grid.14003.36", 
          "name": [
            "Department of Materials Science and Engineering, University of Wisconsin-Madison, 53706, Madison, WI, USA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kou", 
        "givenName": "Sindo", 
        "id": "sg:person.0710072274.07", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0710072274.07"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "King Mongkut's University of Technology Thonburi", 
          "id": "https://www.grid.ac/institutes/grid.412151.2", 
          "name": [
            "Production Engineering Department, Faculty of Engineering, King Mongkut\u2019s University of Technology Thonburi, 10140, Bangkok, Thailand"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Limmaneevichitr", 
        "givenName": "Chaowalit", 
        "id": "sg:person.012560016076.63", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012560016076.63"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/s11661-001-0352-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000516664", 
          "https://doi.org/10.1007/s11661-001-0352-y"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jallcom.2008.10.016", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1001038175"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(99)00291-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1001236939"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11661-014-2395-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003447884", 
          "https://doi.org/10.1007/s11661-014-2395-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.matlet.2005.12.042", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003823091"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf03027360", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1006800333", 
          "https://doi.org/10.1007/bf03027360"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf03027360", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1006800333", 
          "https://doi.org/10.1007/bf03027360"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf03027360", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1006800333", 
          "https://doi.org/10.1007/bf03027360"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.msea.2008.01.028", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1008467222"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.msea.2008.01.056", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1010070149"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.msea.2013.11.039", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1013930274"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.matdes.2014.02.012", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016842654"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1134/s0036029512070129", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018485987", 
          "https://doi.org/10.1134/s0036029512070129"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jallcom.2013.05.139", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1019297727"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11661-005-1012-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1019643802", 
          "https://doi.org/10.1007/s11661-005-1012-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1179/mst.1998.14.8.738", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1020508335"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11661-010-0595-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021203974", 
          "https://doi.org/10.1007/s11661-010-0595-6"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.mspro.2012.06.004", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023063972"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0921-5093(94)09602-s", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023191719"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jallcom.2014.07.037", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024126601"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jallcom.2013.04.139", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024336542"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11661-004-0091-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026226578", 
          "https://doi.org/10.1007/s11661-004-0091-y"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jallcom.2009.07.183", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026250058"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02670615", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026824169", 
          "https://doi.org/10.1007/bf02670615"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02670615", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026824169", 
          "https://doi.org/10.1007/bf02670615"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0956-7151(94)00405-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1028770322"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10853-015-9487-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032102201", 
          "https://doi.org/10.1007/s10853-015-9487-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1361/105994903770343132", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034114049", 
          "https://doi.org/10.1361/105994903770343132"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jallcom.2012.07.018", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035199936"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12598-010-0148-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035980399", 
          "https://doi.org/10.1007/s12598-010-0148-6"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12598-010-0148-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035980399", 
          "https://doi.org/10.1007/s12598-010-0148-6"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.actamat.2014.01.007", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036987053"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jallcom.2016.09.132", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038831280"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12598-009-0020-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1039954423", 
          "https://doi.org/10.1007/s12598-009-0020-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12598-009-0020-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1039954423", 
          "https://doi.org/10.1007/s12598-009-0020-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.msea.2007.12.026", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1046421401"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1003-6326(12)61676-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1047686358"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02644441", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048086395", 
          "https://doi.org/10.1007/bf02644441"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02644441", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048086395", 
          "https://doi.org/10.1007/bf02644441"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02657335", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048459715", 
          "https://doi.org/10.1007/bf02657335"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0022-0248(75)90233-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1050426275"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0022-0248(75)90233-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1050426275"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02643389", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051682694", 
          "https://doi.org/10.1007/bf02643389"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0921-5093(04)00832-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1054663411"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2018-09", 
    "datePublishedReg": "2018-09-01", 
    "description": "Iron (Fe) has a low solid solubility in aluminum (Al), and it usually forms Fe-rich intermetallic compounds. Scandium (Sc) is an element that can act as a grain refiner, modify the eutectic silicon and change the morphology of Fe-rich intermetallic compounds at the same time. The present work was conducted to study the effect of Sc on the mechanical properties of Al\u20137Si\u20130.3Mg. The alloy was prepared by squeeze casting at two levels of Fe (0.2 and 0.4 wt%) and three levels of Sc (0 wt%, 0.2 wt% and 0.4 wt%). Sc is found to increase the mechanical properties of the alloy, including its hardness, yield strength and ultimate tensile strength. At 0.2 wt% Fe, adding Sc increases the strength while maintaining good elongation. At 0.4 wt% Fe, adding Sc increases the strength but decreases the elongation slightly. The distributions and morphologies of intermetallic compounds and eutectic silicon affect the elongation. Both Fe-rich intermetallic compounds and Sc-rich intermetallic compounds act as crack initiation sites. The 0.2 wt% Fe + 0.2 wt% Sc alloy has the lowest amount of these intermetallic compounds, and eutectic silicon is small and fibrous. So, it has the highest elongation.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s12598-017-0970-1", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1048815", 
        "issn": [
          "1001-0521", 
          "1867-7185"
        ], 
        "name": "Rare Metals", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "9", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "37"
      }
    ], 
    "name": "Mechanical properties of squeeze-cast Al\u20137Si\u20130.3Mg alloys with Sc-modified Fe-rich intermetallic compounds", 
    "pagination": "769-777", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "52589c5df0513f8cc3de0313662fae5710a098c896c297b8f5d7a80cb7b2f3a9"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s12598-017-0970-1"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1092348854"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s12598-017-0970-1", 
      "https://app.dimensions.ai/details/publication/pub.1092348854"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-10T15:10", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8663_00000570.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://link.springer.com/10.1007%2Fs12598-017-0970-1"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s12598-017-0970-1'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s12598-017-0970-1'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s12598-017-0970-1'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s12598-017-0970-1'


 

This table displays all metadata directly associated to this object as RDF triples.

214 TRIPLES      21 PREDICATES      64 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s12598-017-0970-1 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author Nbe5bb43e102a400dbc4c0772aea4f0de
4 schema:citation sg:pub.10.1007/bf02643389
5 sg:pub.10.1007/bf02644441
6 sg:pub.10.1007/bf02657335
7 sg:pub.10.1007/bf02670615
8 sg:pub.10.1007/bf03027360
9 sg:pub.10.1007/s10853-015-9487-x
10 sg:pub.10.1007/s11661-001-0352-y
11 sg:pub.10.1007/s11661-004-0091-y
12 sg:pub.10.1007/s11661-005-1012-4
13 sg:pub.10.1007/s11661-010-0595-6
14 sg:pub.10.1007/s11661-014-2395-x
15 sg:pub.10.1007/s12598-009-0020-8
16 sg:pub.10.1007/s12598-010-0148-6
17 sg:pub.10.1134/s0036029512070129
18 sg:pub.10.1361/105994903770343132
19 https://doi.org/10.1016/0022-0248(75)90233-x
20 https://doi.org/10.1016/0921-5093(94)09602-s
21 https://doi.org/10.1016/0956-7151(94)00405-7
22 https://doi.org/10.1016/j.actamat.2014.01.007
23 https://doi.org/10.1016/j.jallcom.2008.10.016
24 https://doi.org/10.1016/j.jallcom.2009.07.183
25 https://doi.org/10.1016/j.jallcom.2012.07.018
26 https://doi.org/10.1016/j.jallcom.2013.04.139
27 https://doi.org/10.1016/j.jallcom.2013.05.139
28 https://doi.org/10.1016/j.jallcom.2014.07.037
29 https://doi.org/10.1016/j.jallcom.2016.09.132
30 https://doi.org/10.1016/j.matdes.2014.02.012
31 https://doi.org/10.1016/j.matlet.2005.12.042
32 https://doi.org/10.1016/j.msea.2007.12.026
33 https://doi.org/10.1016/j.msea.2008.01.028
34 https://doi.org/10.1016/j.msea.2008.01.056
35 https://doi.org/10.1016/j.msea.2013.11.039
36 https://doi.org/10.1016/j.mspro.2012.06.004
37 https://doi.org/10.1016/s0921-5093(04)00832-9
38 https://doi.org/10.1016/s0924-0136(99)00291-5
39 https://doi.org/10.1016/s1003-6326(12)61676-8
40 https://doi.org/10.1179/mst.1998.14.8.738
41 schema:datePublished 2018-09
42 schema:datePublishedReg 2018-09-01
43 schema:description Iron (Fe) has a low solid solubility in aluminum (Al), and it usually forms Fe-rich intermetallic compounds. Scandium (Sc) is an element that can act as a grain refiner, modify the eutectic silicon and change the morphology of Fe-rich intermetallic compounds at the same time. The present work was conducted to study the effect of Sc on the mechanical properties of Al–7Si–0.3Mg. The alloy was prepared by squeeze casting at two levels of Fe (0.2 and 0.4 wt%) and three levels of Sc (0 wt%, 0.2 wt% and 0.4 wt%). Sc is found to increase the mechanical properties of the alloy, including its hardness, yield strength and ultimate tensile strength. At 0.2 wt% Fe, adding Sc increases the strength while maintaining good elongation. At 0.4 wt% Fe, adding Sc increases the strength but decreases the elongation slightly. The distributions and morphologies of intermetallic compounds and eutectic silicon affect the elongation. Both Fe-rich intermetallic compounds and Sc-rich intermetallic compounds act as crack initiation sites. The 0.2 wt% Fe + 0.2 wt% Sc alloy has the lowest amount of these intermetallic compounds, and eutectic silicon is small and fibrous. So, it has the highest elongation.
44 schema:genre research_article
45 schema:inLanguage en
46 schema:isAccessibleForFree false
47 schema:isPartOf N2fba6ee31ffb426d9cd248aa5c5de2db
48 N6a45dfa05a824082a04bf9c088b0c28a
49 sg:journal.1048815
50 schema:name Mechanical properties of squeeze-cast Al–7Si–0.3Mg alloys with Sc-modified Fe-rich intermetallic compounds
51 schema:pagination 769-777
52 schema:productId N4b078ae525ac4a038c553afb944094b1
53 N8fea4abe51cc405187802fa9729e3dd2
54 Na551e19bed2e45fd8284733f673e7e20
55 schema:sameAs https://app.dimensions.ai/details/publication/pub.1092348854
56 https://doi.org/10.1007/s12598-017-0970-1
57 schema:sdDatePublished 2019-04-10T15:10
58 schema:sdLicense https://scigraph.springernature.com/explorer/license/
59 schema:sdPublisher N883ee2a89d864153a86c8a3a0c54954d
60 schema:url https://link.springer.com/10.1007%2Fs12598-017-0970-1
61 sgo:license sg:explorer/license/
62 sgo:sdDataset articles
63 rdf:type schema:ScholarlyArticle
64 N0001d1cb78694eb998035203001e9b61 rdf:first sg:person.012560016076.63
65 rdf:rest rdf:nil
66 N2fba6ee31ffb426d9cd248aa5c5de2db schema:volumeNumber 37
67 rdf:type schema:PublicationVolume
68 N4b078ae525ac4a038c553afb944094b1 schema:name doi
69 schema:value 10.1007/s12598-017-0970-1
70 rdf:type schema:PropertyValue
71 N6a45dfa05a824082a04bf9c088b0c28a schema:issueNumber 9
72 rdf:type schema:PublicationIssue
73 N883ee2a89d864153a86c8a3a0c54954d schema:name Springer Nature - SN SciGraph project
74 rdf:type schema:Organization
75 N8fea4abe51cc405187802fa9729e3dd2 schema:name readcube_id
76 schema:value 52589c5df0513f8cc3de0313662fae5710a098c896c297b8f5d7a80cb7b2f3a9
77 rdf:type schema:PropertyValue
78 Na551e19bed2e45fd8284733f673e7e20 schema:name dimensions_id
79 schema:value pub.1092348854
80 rdf:type schema:PropertyValue
81 Naeaed6326a1642bba04b3120182e4c98 rdf:first sg:person.0710072274.07
82 rdf:rest N0001d1cb78694eb998035203001e9b61
83 Nbe5bb43e102a400dbc4c0772aea4f0de rdf:first sg:person.016244617517.88
84 rdf:rest Ndcb7a75c00b9447bb421fb34367dc0f9
85 Ndcb7a75c00b9447bb421fb34367dc0f9 rdf:first sg:person.01303165437.60
86 rdf:rest Naeaed6326a1642bba04b3120182e4c98
87 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
88 schema:name Engineering
89 rdf:type schema:DefinedTerm
90 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
91 schema:name Materials Engineering
92 rdf:type schema:DefinedTerm
93 sg:journal.1048815 schema:issn 1001-0521
94 1867-7185
95 schema:name Rare Metals
96 rdf:type schema:Periodical
97 sg:person.012560016076.63 schema:affiliation https://www.grid.ac/institutes/grid.412151.2
98 schema:familyName Limmaneevichitr
99 schema:givenName Chaowalit
100 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012560016076.63
101 rdf:type schema:Person
102 sg:person.01303165437.60 schema:affiliation https://www.grid.ac/institutes/grid.466918.4
103 schema:familyName Patakham
104 schema:givenName Ussadawut
105 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01303165437.60
106 rdf:type schema:Person
107 sg:person.016244617517.88 schema:affiliation https://www.grid.ac/institutes/grid.412151.2
108 schema:familyName Chanyathunyaroj
109 schema:givenName Kittisak
110 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016244617517.88
111 rdf:type schema:Person
112 sg:person.0710072274.07 schema:affiliation https://www.grid.ac/institutes/grid.14003.36
113 schema:familyName Kou
114 schema:givenName Sindo
115 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0710072274.07
116 rdf:type schema:Person
117 sg:pub.10.1007/bf02643389 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051682694
118 https://doi.org/10.1007/bf02643389
119 rdf:type schema:CreativeWork
120 sg:pub.10.1007/bf02644441 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048086395
121 https://doi.org/10.1007/bf02644441
122 rdf:type schema:CreativeWork
123 sg:pub.10.1007/bf02657335 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048459715
124 https://doi.org/10.1007/bf02657335
125 rdf:type schema:CreativeWork
126 sg:pub.10.1007/bf02670615 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026824169
127 https://doi.org/10.1007/bf02670615
128 rdf:type schema:CreativeWork
129 sg:pub.10.1007/bf03027360 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006800333
130 https://doi.org/10.1007/bf03027360
131 rdf:type schema:CreativeWork
132 sg:pub.10.1007/s10853-015-9487-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1032102201
133 https://doi.org/10.1007/s10853-015-9487-x
134 rdf:type schema:CreativeWork
135 sg:pub.10.1007/s11661-001-0352-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1000516664
136 https://doi.org/10.1007/s11661-001-0352-y
137 rdf:type schema:CreativeWork
138 sg:pub.10.1007/s11661-004-0091-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1026226578
139 https://doi.org/10.1007/s11661-004-0091-y
140 rdf:type schema:CreativeWork
141 sg:pub.10.1007/s11661-005-1012-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019643802
142 https://doi.org/10.1007/s11661-005-1012-4
143 rdf:type schema:CreativeWork
144 sg:pub.10.1007/s11661-010-0595-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021203974
145 https://doi.org/10.1007/s11661-010-0595-6
146 rdf:type schema:CreativeWork
147 sg:pub.10.1007/s11661-014-2395-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1003447884
148 https://doi.org/10.1007/s11661-014-2395-x
149 rdf:type schema:CreativeWork
150 sg:pub.10.1007/s12598-009-0020-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039954423
151 https://doi.org/10.1007/s12598-009-0020-8
152 rdf:type schema:CreativeWork
153 sg:pub.10.1007/s12598-010-0148-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035980399
154 https://doi.org/10.1007/s12598-010-0148-6
155 rdf:type schema:CreativeWork
156 sg:pub.10.1134/s0036029512070129 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018485987
157 https://doi.org/10.1134/s0036029512070129
158 rdf:type schema:CreativeWork
159 sg:pub.10.1361/105994903770343132 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034114049
160 https://doi.org/10.1361/105994903770343132
161 rdf:type schema:CreativeWork
162 https://doi.org/10.1016/0022-0248(75)90233-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1050426275
163 rdf:type schema:CreativeWork
164 https://doi.org/10.1016/0921-5093(94)09602-s schema:sameAs https://app.dimensions.ai/details/publication/pub.1023191719
165 rdf:type schema:CreativeWork
166 https://doi.org/10.1016/0956-7151(94)00405-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028770322
167 rdf:type schema:CreativeWork
168 https://doi.org/10.1016/j.actamat.2014.01.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036987053
169 rdf:type schema:CreativeWork
170 https://doi.org/10.1016/j.jallcom.2008.10.016 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001038175
171 rdf:type schema:CreativeWork
172 https://doi.org/10.1016/j.jallcom.2009.07.183 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026250058
173 rdf:type schema:CreativeWork
174 https://doi.org/10.1016/j.jallcom.2012.07.018 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035199936
175 rdf:type schema:CreativeWork
176 https://doi.org/10.1016/j.jallcom.2013.04.139 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024336542
177 rdf:type schema:CreativeWork
178 https://doi.org/10.1016/j.jallcom.2013.05.139 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019297727
179 rdf:type schema:CreativeWork
180 https://doi.org/10.1016/j.jallcom.2014.07.037 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024126601
181 rdf:type schema:CreativeWork
182 https://doi.org/10.1016/j.jallcom.2016.09.132 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038831280
183 rdf:type schema:CreativeWork
184 https://doi.org/10.1016/j.matdes.2014.02.012 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016842654
185 rdf:type schema:CreativeWork
186 https://doi.org/10.1016/j.matlet.2005.12.042 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003823091
187 rdf:type schema:CreativeWork
188 https://doi.org/10.1016/j.msea.2007.12.026 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046421401
189 rdf:type schema:CreativeWork
190 https://doi.org/10.1016/j.msea.2008.01.028 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008467222
191 rdf:type schema:CreativeWork
192 https://doi.org/10.1016/j.msea.2008.01.056 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010070149
193 rdf:type schema:CreativeWork
194 https://doi.org/10.1016/j.msea.2013.11.039 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013930274
195 rdf:type schema:CreativeWork
196 https://doi.org/10.1016/j.mspro.2012.06.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023063972
197 rdf:type schema:CreativeWork
198 https://doi.org/10.1016/s0921-5093(04)00832-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1054663411
199 rdf:type schema:CreativeWork
200 https://doi.org/10.1016/s0924-0136(99)00291-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001236939
201 rdf:type schema:CreativeWork
202 https://doi.org/10.1016/s1003-6326(12)61676-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047686358
203 rdf:type schema:CreativeWork
204 https://doi.org/10.1179/mst.1998.14.8.738 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020508335
205 rdf:type schema:CreativeWork
206 https://www.grid.ac/institutes/grid.14003.36 schema:alternateName University of Wisconsin–Madison
207 schema:name Department of Materials Science and Engineering, University of Wisconsin-Madison, 53706, Madison, WI, USA
208 rdf:type schema:Organization
209 https://www.grid.ac/institutes/grid.412151.2 schema:alternateName King Mongkut's University of Technology Thonburi
210 schema:name Production Engineering Department, Faculty of Engineering, King Mongkut’s University of Technology Thonburi, 10140, Bangkok, Thailand
211 rdf:type schema:Organization
212 https://www.grid.ac/institutes/grid.466918.4 schema:alternateName Thailand National Metal and Materials Technology Center
213 schema:name National Metal and Materials Technology Center, National Science and Technology Development Agency, 12120, Khlong Nueng, Pathumthani, Thailand
214 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...