Ontology type: schema:ScholarlyArticle
2018-09
AUTHORSTahiana F. C. Hermenegildo, Tiago F. A. Santos, Edwar A. Torres, Conrado R. M. Afonso, Antonio J. Ramirez
ABSTRACTEvaluation was made of friction stir welded joints, identifying conditions that resulted in satisfactory welded joints free from defects and with microstructural characteristics that provided good mechanical properties. Microstructural characterization and cooling curve analysis of the joints with lower and higher heat inputs evidenced deformation below and above the non-recrystallization temperature (Tnr) and dynamic recrystallization during microstructural evolution. Microscopy analyses showed acicular ferrite, bainitic ferrite, and coalesced bainite microstructures in the stir zone of the cold weld (lower heat input), while the stir zone of the hot weld (higher heat input) contained bainitic ferrite, acicular ferrite, coalesced bainite, martensite, and dispersed carbides. Granular bainite and dispersed carbides were observed in all the heat affected zones. Analysis of the microstructural transformations, together with the thermal history of the joints, showed that the variable that had the greatest influence on the morphology of the bainite (granular bainite/bainitic ferrite) was the deformation temperature. More... »
PAGES1120-1132
http://scigraph.springernature.com/pub.10.1007/s12540-018-0111-x
DOIhttp://dx.doi.org/10.1007/s12540-018-0111-x
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1101767234
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0403",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Geology",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/04",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Earth Sciences",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "Federal University of Pernambuco",
"id": "https://www.grid.ac/institutes/grid.411227.3",
"name": [
"Department of Mechanical Engineering, Universidade Federal de Pernambuco, Av. da Arquitetura, s/n, 50740-550, Recife, Brazil"
],
"type": "Organization"
},
"familyName": "Hermenegildo",
"givenName": "Tahiana F. C.",
"id": "sg:person.014276325167.04",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014276325167.04"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Federal University of Pernambuco",
"id": "https://www.grid.ac/institutes/grid.411227.3",
"name": [
"Department of Mechanical Engineering, Universidade Federal de Pernambuco, Av. da Arquitetura, s/n, 50740-550, Recife, Brazil"
],
"type": "Organization"
},
"familyName": "Santos",
"givenName": "Tiago F. A.",
"id": "sg:person.010135246231.63",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010135246231.63"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Antioquia",
"id": "https://www.grid.ac/institutes/grid.412881.6",
"name": [
"Department of Mechanical Engineering, Universidad de Antioquia, Medellin, Colombia"
],
"type": "Organization"
},
"familyName": "Torres",
"givenName": "Edwar A.",
"id": "sg:person.016042737031.50",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016042737031.50"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Federal University of S\u00e3o Carlos",
"id": "https://www.grid.ac/institutes/grid.411247.5",
"name": [
"Department of Materials Engineering, Universidade Federal de S\u00e3o Carlos, S\u00e3o Carlos, Brazil"
],
"type": "Organization"
},
"familyName": "Afonso",
"givenName": "Conrado R. M.",
"id": "sg:person.011346533637.32",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011346533637.32"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "The Ohio State University",
"id": "https://www.grid.ac/institutes/grid.261331.4",
"name": [
"Department of Materials Science and Engineering, Ohio State University, Columbus, USA"
],
"type": "Organization"
},
"familyName": "Ramirez",
"givenName": "Antonio J.",
"id": "sg:person.013363420571.75",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013363420571.75"
],
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.2355/isijinternational.35.1006",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1000384360"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2355/isijinternational.35.1020",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1000853942"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0261-3069(97)00062-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1003768844"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1179/030716984803275197",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1003994822"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1590/1980-5373-mr-2015-0319",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1005184986"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2355/isijinternational.35.1013",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1005503097"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s1044-5803(96)00069-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1007472142"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/bf02817268",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1007981500",
"https://doi.org/10.1007/bf02817268"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2014.12.074",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1008269108"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0921-5093(99)00288-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010744980"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2003.10.304",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1012191974"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.mser.2005.07.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1015184288"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.mser.2005.07.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1015184288"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11663-003-0084-z",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1017159183",
"https://doi.org/10.1007/s11663-003-0084-z"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2016.03.095",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1017253438"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matdes.2011.08.010",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1017391106"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2006.04.118",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1017541468"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jngse.2015.08.074",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1019517068"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2015.07.019",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020766850"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2013.07.090",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1027108306"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.engfracmech.2010.07.022",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030228108"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2011.10.017",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1031091124"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1179/136217108x338926",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1031166586"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2010.10.011",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1033366264"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2320/matertrans1989.32.715",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1039878722"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matdes.2015.09.049",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1040201654"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2011.01.031",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1043445530"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s1006-7191(06)60034-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1046471113"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2355/isijinternational1966.22.214",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049639026"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2006.02.069",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050162221"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2006.08.017",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1051000716"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0254-0584(00)00379-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052562432"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11665-015-1652-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052652375",
"https://doi.org/10.1007/s11665-015-1652-5"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1038/scientificamerican0576-40",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1056542045",
"https://doi.org/10.1038/scientificamerican0576-40"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1590/0104-9224/si2202.03",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1091366116"
],
"type": "CreativeWork"
}
],
"datePublished": "2018-09",
"datePublishedReg": "2018-09-01",
"description": "Evaluation was made of friction stir welded joints, identifying conditions that resulted in satisfactory welded joints free from defects and with microstructural characteristics that provided good mechanical properties. Microstructural characterization and cooling curve analysis of the joints with lower and higher heat inputs evidenced deformation below and above the non-recrystallization temperature (Tnr) and dynamic recrystallization during microstructural evolution. Microscopy analyses showed acicular ferrite, bainitic ferrite, and coalesced bainite microstructures in the stir zone of the cold weld (lower heat input), while the stir zone of the hot weld (higher heat input) contained bainitic ferrite, acicular ferrite, coalesced bainite, martensite, and dispersed carbides. Granular bainite and dispersed carbides were observed in all the heat affected zones. Analysis of the microstructural transformations, together with the thermal history of the joints, showed that the variable that had the greatest influence on the morphology of the bainite (granular bainite/bainitic ferrite) was the deformation temperature.",
"genre": "research_article",
"id": "sg:pub.10.1007/s12540-018-0111-x",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1136083",
"issn": [
"1225-9438",
"2005-4149"
],
"name": "Metals and Materials International",
"type": "Periodical"
},
{
"issueNumber": "5",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "24"
}
],
"name": "Microstructural Evolution of HSLA ISO 3183 X80M (API 5L X80) Friction Stir Welded Joints",
"pagination": "1120-1132",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"138d2b9ee57c5ded700853dbc2df0ab73a34536e46ec13a7f17dddb4cf0fb16b"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s12540-018-0111-x"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1101767234"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s12540-018-0111-x",
"https://app.dimensions.ai/details/publication/pub.1101767234"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-11T13:10",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000367_0000000367/records_88242_00000001.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.1007%2Fs12540-018-0111-x"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s12540-018-0111-x'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s12540-018-0111-x'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s12540-018-0111-x'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s12540-018-0111-x'
This table displays all metadata directly associated to this object as RDF triples.
204 TRIPLES
21 PREDICATES
61 URIs
19 LITERALS
7 BLANK NODES