Validation of hot ring rolling industrial process 3D simulation View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2013-03

AUTHORS

Luca Giorleo, Claudio Giardini, Elisabetta Ceretti

ABSTRACT

Ring rolling is a hot forming process used in the production of railway tyres, anti friction bearing races and different ring shaped work pieces for automotive energy production and aerospace applications. The advantages of ring rolling process include short production time, uniform quality, closed tolerances, good material quality and considerable saving in material cost. Despite the benefits some problems still exist according to a correct selection of the process parameters. Due to the nature of the process different rolling mills (driving, idle and axial rolls) are involved and the correct selection of the process parameters is not so feasible. Moreover an experimental approach to solve this problem risks to be more expensive. Actually FE codes are available to simulate the non linear problem that characterizes a ring rolling process. In this work a FE model, based on Deform 3D software, was tested versus experimental results acquired from an industrial plant. The accuracy of the FE model was analyzed through a dual comparison: by geometrical and by physical aspects. A good agreement was found between experimental and numerical results for both comparisons and, as a consequence, this code could be used in order to investigate and optimize the process parameters that characterize the ring rolling process in a virtual not expensive environment. The validated model will allow the studies of more environment-friend process configurations. More... »

PAGES

145-152

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s12289-011-1056-5

DOI

http://dx.doi.org/10.1007/s12289-011-1056-5

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1014308557


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0910", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Manufacturing Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "University of Brescia", 
          "id": "https://www.grid.ac/institutes/grid.7637.5", 
          "name": [
            "Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Giorleo", 
        "givenName": "Luca", 
        "id": "sg:person.07472051344.51", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07472051344.51"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "University of Bergamo", 
          "id": "https://www.grid.ac/institutes/grid.33236.37", 
          "name": [
            "Department of Design and Technologies, University of Bergamo, Dalmine, Bergamo, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Giardini", 
        "givenName": "Claudio", 
        "id": "sg:person.016030704477.43", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016030704477.43"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "University of Brescia", 
          "id": "https://www.grid.ac/institutes/grid.7637.5", 
          "name": [
            "Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Ceretti", 
        "givenName": "Elisabetta", 
        "id": "sg:person.010064141760.32", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010064141760.32"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/s0924-0136(98)00106-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000553618"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0890-6955(92)90009-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005848010"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0890-6955(92)90009-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005848010"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.commatsci.2008.04.026", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005949709"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(02)00356-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1011200780"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jmatprotec.2006.10.038", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1013015624"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0020-7403(87)90049-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016136856"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0020-7403(87)90049-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016136856"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0007-8506(07)60091-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016990072"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(03)00721-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022470157"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(03)00721-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022470157"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jmatprotec.2008.07.054", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023570781"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijmachtools.2007.01.009", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024830992"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0020-7403(68)90026-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024955504"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0020-7403(68)90026-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024955504"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1003-6326(08)60207-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1031722175"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0020-7403(68)90066-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1033052733"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0020-7403(68)90066-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1033052733"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(01)01179-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034324702"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(98)00171-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041522520"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(02)00354-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1043869785"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0045-7825(00)80004-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051389752"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0045-7825(00)80004-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051389752"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1179/095066079790136345", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064103516"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1243/jmes_jour_1976_018_032_02", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064460197"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1243/jmes_jour_1976_018_032_02", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064460197"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2013-03", 
    "datePublishedReg": "2013-03-01", 
    "description": "Ring rolling is a hot forming process used in the production of railway tyres, anti friction bearing races and different ring shaped work pieces for automotive energy production and aerospace applications. The advantages of ring rolling process include short production time, uniform quality, closed tolerances, good material quality and considerable saving in material cost. Despite the benefits some problems still exist according to a correct selection of the process parameters. Due to the nature of the process different rolling mills (driving, idle and axial rolls) are involved and the correct selection of the process parameters is not so feasible. Moreover an experimental approach to solve this problem risks to be more expensive. Actually FE codes are available to simulate the non linear problem that characterizes a ring rolling process. In this work a FE model, based on Deform 3D software, was tested versus experimental results acquired from an industrial plant. The accuracy of the FE model was analyzed through a dual comparison: by geometrical and by physical aspects. A good agreement was found between experimental and numerical results for both comparisons and, as a consequence, this code could be used in order to investigate and optimize the process parameters that characterize the ring rolling process in a virtual not expensive environment. The validated model will allow the studies of more environment-friend process configurations.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s12289-011-1056-5", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1136846", 
        "issn": [
          "1960-6206", 
          "1960-6214"
        ], 
        "name": "International Journal of Material Forming", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "1", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "6"
      }
    ], 
    "name": "Validation of hot ring rolling industrial process 3D simulation", 
    "pagination": "145-152", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "442a5bc1441c0dd78c5ab4f776a99b10030672e6756da2b36b21dd7b67baf0bb"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s12289-011-1056-5"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1014308557"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s12289-011-1056-5", 
      "https://app.dimensions.ai/details/publication/pub.1014308557"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T00:18", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8695_00000521.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1007%2Fs12289-011-1056-5"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s12289-011-1056-5'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s12289-011-1056-5'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s12289-011-1056-5'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s12289-011-1056-5'


 

This table displays all metadata directly associated to this object as RDF triples.

135 TRIPLES      21 PREDICATES      46 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s12289-011-1056-5 schema:about anzsrc-for:09
2 anzsrc-for:0910
3 schema:author N03e7a5f6689b4ea1811a551080adc07e
4 schema:citation https://doi.org/10.1016/0020-7403(68)90026-x
5 https://doi.org/10.1016/0020-7403(68)90066-0
6 https://doi.org/10.1016/0020-7403(87)90049-x
7 https://doi.org/10.1016/0890-6955(92)90009-6
8 https://doi.org/10.1016/j.commatsci.2008.04.026
9 https://doi.org/10.1016/j.ijmachtools.2007.01.009
10 https://doi.org/10.1016/j.jmatprotec.2006.10.038
11 https://doi.org/10.1016/j.jmatprotec.2008.07.054
12 https://doi.org/10.1016/s0007-8506(07)60091-2
13 https://doi.org/10.1016/s0045-7825(00)80004-3
14 https://doi.org/10.1016/s0924-0136(01)01179-7
15 https://doi.org/10.1016/s0924-0136(02)00354-0
16 https://doi.org/10.1016/s0924-0136(02)00356-4
17 https://doi.org/10.1016/s0924-0136(03)00721-0
18 https://doi.org/10.1016/s0924-0136(98)00106-x
19 https://doi.org/10.1016/s0924-0136(98)00171-x
20 https://doi.org/10.1016/s1003-6326(08)60207-1
21 https://doi.org/10.1179/095066079790136345
22 https://doi.org/10.1243/jmes_jour_1976_018_032_02
23 schema:datePublished 2013-03
24 schema:datePublishedReg 2013-03-01
25 schema:description Ring rolling is a hot forming process used in the production of railway tyres, anti friction bearing races and different ring shaped work pieces for automotive energy production and aerospace applications. The advantages of ring rolling process include short production time, uniform quality, closed tolerances, good material quality and considerable saving in material cost. Despite the benefits some problems still exist according to a correct selection of the process parameters. Due to the nature of the process different rolling mills (driving, idle and axial rolls) are involved and the correct selection of the process parameters is not so feasible. Moreover an experimental approach to solve this problem risks to be more expensive. Actually FE codes are available to simulate the non linear problem that characterizes a ring rolling process. In this work a FE model, based on Deform 3D software, was tested versus experimental results acquired from an industrial plant. The accuracy of the FE model was analyzed through a dual comparison: by geometrical and by physical aspects. A good agreement was found between experimental and numerical results for both comparisons and, as a consequence, this code could be used in order to investigate and optimize the process parameters that characterize the ring rolling process in a virtual not expensive environment. The validated model will allow the studies of more environment-friend process configurations.
26 schema:genre research_article
27 schema:inLanguage en
28 schema:isAccessibleForFree false
29 schema:isPartOf N1f1c1a9de7514a0692e09f243f3bb502
30 N23d8210c543c4ea4895bf54a1980062a
31 sg:journal.1136846
32 schema:name Validation of hot ring rolling industrial process 3D simulation
33 schema:pagination 145-152
34 schema:productId N1c0e2904e5da4b55a467cf4325034427
35 N6ec844ebc1994c7fb401b9bb5f70084a
36 Nc62453271255466eb7632f284e76a789
37 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014308557
38 https://doi.org/10.1007/s12289-011-1056-5
39 schema:sdDatePublished 2019-04-11T00:18
40 schema:sdLicense https://scigraph.springernature.com/explorer/license/
41 schema:sdPublisher Nb5ecfd4e8a9c47349d1526d6d587e285
42 schema:url http://link.springer.com/10.1007%2Fs12289-011-1056-5
43 sgo:license sg:explorer/license/
44 sgo:sdDataset articles
45 rdf:type schema:ScholarlyArticle
46 N03e7a5f6689b4ea1811a551080adc07e rdf:first sg:person.07472051344.51
47 rdf:rest N9614bda5f66e40378a5eca10e856ebff
48 N1c0e2904e5da4b55a467cf4325034427 schema:name dimensions_id
49 schema:value pub.1014308557
50 rdf:type schema:PropertyValue
51 N1f1c1a9de7514a0692e09f243f3bb502 schema:volumeNumber 6
52 rdf:type schema:PublicationVolume
53 N23d8210c543c4ea4895bf54a1980062a schema:issueNumber 1
54 rdf:type schema:PublicationIssue
55 N44a53e635b694aefb98c35fea5d96b96 rdf:first sg:person.010064141760.32
56 rdf:rest rdf:nil
57 N6ec844ebc1994c7fb401b9bb5f70084a schema:name doi
58 schema:value 10.1007/s12289-011-1056-5
59 rdf:type schema:PropertyValue
60 N9614bda5f66e40378a5eca10e856ebff rdf:first sg:person.016030704477.43
61 rdf:rest N44a53e635b694aefb98c35fea5d96b96
62 Nb5ecfd4e8a9c47349d1526d6d587e285 schema:name Springer Nature - SN SciGraph project
63 rdf:type schema:Organization
64 Nc62453271255466eb7632f284e76a789 schema:name readcube_id
65 schema:value 442a5bc1441c0dd78c5ab4f776a99b10030672e6756da2b36b21dd7b67baf0bb
66 rdf:type schema:PropertyValue
67 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
68 schema:name Engineering
69 rdf:type schema:DefinedTerm
70 anzsrc-for:0910 schema:inDefinedTermSet anzsrc-for:
71 schema:name Manufacturing Engineering
72 rdf:type schema:DefinedTerm
73 sg:journal.1136846 schema:issn 1960-6206
74 1960-6214
75 schema:name International Journal of Material Forming
76 rdf:type schema:Periodical
77 sg:person.010064141760.32 schema:affiliation https://www.grid.ac/institutes/grid.7637.5
78 schema:familyName Ceretti
79 schema:givenName Elisabetta
80 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010064141760.32
81 rdf:type schema:Person
82 sg:person.016030704477.43 schema:affiliation https://www.grid.ac/institutes/grid.33236.37
83 schema:familyName Giardini
84 schema:givenName Claudio
85 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016030704477.43
86 rdf:type schema:Person
87 sg:person.07472051344.51 schema:affiliation https://www.grid.ac/institutes/grid.7637.5
88 schema:familyName Giorleo
89 schema:givenName Luca
90 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07472051344.51
91 rdf:type schema:Person
92 https://doi.org/10.1016/0020-7403(68)90026-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1024955504
93 rdf:type schema:CreativeWork
94 https://doi.org/10.1016/0020-7403(68)90066-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033052733
95 rdf:type schema:CreativeWork
96 https://doi.org/10.1016/0020-7403(87)90049-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1016136856
97 rdf:type schema:CreativeWork
98 https://doi.org/10.1016/0890-6955(92)90009-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005848010
99 rdf:type schema:CreativeWork
100 https://doi.org/10.1016/j.commatsci.2008.04.026 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005949709
101 rdf:type schema:CreativeWork
102 https://doi.org/10.1016/j.ijmachtools.2007.01.009 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024830992
103 rdf:type schema:CreativeWork
104 https://doi.org/10.1016/j.jmatprotec.2006.10.038 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013015624
105 rdf:type schema:CreativeWork
106 https://doi.org/10.1016/j.jmatprotec.2008.07.054 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023570781
107 rdf:type schema:CreativeWork
108 https://doi.org/10.1016/s0007-8506(07)60091-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016990072
109 rdf:type schema:CreativeWork
110 https://doi.org/10.1016/s0045-7825(00)80004-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051389752
111 rdf:type schema:CreativeWork
112 https://doi.org/10.1016/s0924-0136(01)01179-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034324702
113 rdf:type schema:CreativeWork
114 https://doi.org/10.1016/s0924-0136(02)00354-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043869785
115 rdf:type schema:CreativeWork
116 https://doi.org/10.1016/s0924-0136(02)00356-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011200780
117 rdf:type schema:CreativeWork
118 https://doi.org/10.1016/s0924-0136(03)00721-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022470157
119 rdf:type schema:CreativeWork
120 https://doi.org/10.1016/s0924-0136(98)00106-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1000553618
121 rdf:type schema:CreativeWork
122 https://doi.org/10.1016/s0924-0136(98)00171-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1041522520
123 rdf:type schema:CreativeWork
124 https://doi.org/10.1016/s1003-6326(08)60207-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1031722175
125 rdf:type schema:CreativeWork
126 https://doi.org/10.1179/095066079790136345 schema:sameAs https://app.dimensions.ai/details/publication/pub.1064103516
127 rdf:type schema:CreativeWork
128 https://doi.org/10.1243/jmes_jour_1976_018_032_02 schema:sameAs https://app.dimensions.ai/details/publication/pub.1064460197
129 rdf:type schema:CreativeWork
130 https://www.grid.ac/institutes/grid.33236.37 schema:alternateName University of Bergamo
131 schema:name Department of Design and Technologies, University of Bergamo, Dalmine, Bergamo, Italy
132 rdf:type schema:Organization
133 https://www.grid.ac/institutes/grid.7637.5 schema:alternateName University of Brescia
134 schema:name Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
135 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...