Experimental Investigation on Effect of EDL on Heat Transfer of Micro Heat Pipe View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2019-04-02

AUTHORS

Maryam Fallah Abbasi, Hossein Shokouhmand

ABSTRACT

Due to the reduced dimensions of electronic equipment and the need for thermal management of these equipment, In order to increase efficiency and longevity of component, heat sinks with micro aspects are very important. In this study, heat transfer of micro heat pipe has been studied experimentally. For this purpose, firstly the micro heat pipe that is suitable for industrial conditions and restrictions for the production of very small size triangular section was designed and built. According to the very small size of the primary copper tube, the manufacturing process requires precision and advanced technology. In such a way, at first the samples of fine copper tube available in the market was provided and during the process of heat and tension was brought, at the same time, to the desired thickness and diameter and then by using provided wedge the appropriate cross section is achieved. To apply thermal load, a set of various thermal flux was applied to the evaporator and temperature distribution achieved via five thermocouples which were installed on the body in accordance with the set-up and heat resistance was measured. Water and different solution mixture of water and ethanol were used to investigate effect of the electric double layer heat transfer. It was noticed that the electric double layer of ionized fluid has caused reduction of heat transfer. So that the effect of the double electric layer causes 20% drop in the thermal performance of heat pipe. However, when the operating fluid was normal water or a mixture of water and ethanol, the temperature difference between the evaporator and the condenser was higher than when pure water used. This was due to the fact that the dual electrical layer led to a disruption in the flow path inside the pipe. Micro heat pipe performance was affected due to the small size of the micro pipe as well as the ions in the fluid, causing a higher temperature difference between the evaporator and condenser sections. More... »

PAGES

1-10

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s12217-019-9685-2

DOI

http://dx.doi.org/10.1007/s12217-019-9685-2

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1113199894


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0915", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Interdisciplinary Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Islamic Azad University, Science and Research Branch", 
          "id": "https://www.grid.ac/institutes/grid.472472.0", 
          "name": [
            "Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Fallah Abbasi", 
        "givenName": "Maryam", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "University of Tehran", 
          "id": "https://www.grid.ac/institutes/grid.46072.37", 
          "name": [
            "School of Mechanical Engineering, College of Eng. University of Tehran, Tehran, Iran"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Shokouhmand", 
        "givenName": "Hossein", 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1006/jcis.2000.7262", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1001825385"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0026-2714(03)00160-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003595235"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0026-2714(03)00160-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003595235"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijmultiphaseflow.2009.11.007", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1013277754"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijheatmasstransfer.2005.01.007", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1015186293"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijheatfluidflow.2004.09.006", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1017512589"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.crme.2009.04.007", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021039445"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1006/jcph.2001.6810", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022496425"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.molliq.2017.01.033", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036008080"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-009-9110-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1037267572", 
          "https://doi.org/10.1007/s12217-009-9110-3"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-009-9110-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1037267572", 
          "https://doi.org/10.1007/s12217-009-9110-3"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1088/0960-1317/18/11/115030", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1039679734"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10483-008-0603-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042059086", 
          "https://doi.org/10.1007/s10483-008-0603-7"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10483-008-0603-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042059086", 
          "https://doi.org/10.1007/s10483-008-0603-7"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0035-3159(98)80089-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042848605"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0017-9310(96)00356-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1046988861"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-010-9195-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1047183145", 
          "https://doi.org/10.1007/s12217-010-9195-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-010-9195-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1047183145", 
          "https://doi.org/10.1007/s12217-010-9195-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.compfluid.2009.09.014", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048604396"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.molliq.2016.05.049", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1053409735"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.115", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1083699673"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.070", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1085128462"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1108/hff-04-2016-0164", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1090548014"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.3390/e19090481", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1091509592"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-017-9562-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1092551061", 
          "https://doi.org/10.1007/s12217-017-9562-9"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/icit.2003.1290821", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1095335951"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1063/1.3295304", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1098561097"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-018-9600-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1101548295", 
          "https://doi.org/10.1007/s12217-018-9600-2"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-018-9600-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1101548295", 
          "https://doi.org/10.1007/s12217-018-9600-2"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-018-9600-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1101548295", 
          "https://doi.org/10.1007/s12217-018-9600-2"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-018-9600-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1101548295", 
          "https://doi.org/10.1007/s12217-018-9600-2"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12648-018-1215-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1103951414", 
          "https://doi.org/10.1007/s12648-018-1215-3"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-018-9627-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1105010742", 
          "https://doi.org/10.1007/s12217-018-9627-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12217-018-9627-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1105010742", 
          "https://doi.org/10.1007/s12217-018-9627-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.5772/1432", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1108384177"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2019-04-02", 
    "datePublishedReg": "2019-04-02", 
    "description": "Due to the reduced dimensions of electronic equipment and the need for thermal management of these equipment, In order to increase efficiency and longevity of component, heat sinks with micro aspects are very important. In this study, heat transfer of micro heat pipe has been studied experimentally. For this purpose, firstly the micro heat pipe that is suitable for industrial conditions and restrictions for the production of very small size triangular section was designed and built. According to the very small size of the primary copper tube, the manufacturing process requires precision and advanced technology. In such a way, at first the samples of fine copper tube available in the market was provided and during the process of heat and tension was brought, at the same time, to the desired thickness and diameter and then by using provided wedge the appropriate cross section is achieved. To apply thermal load, a set of various thermal flux was applied to the evaporator and temperature distribution achieved via five thermocouples which were installed on the body in accordance with the set-up and heat resistance was measured. Water and different solution mixture of water and ethanol were used to investigate effect of the electric double layer heat transfer. It was noticed that the electric double layer of ionized fluid has caused reduction of heat transfer. So that the effect of the double electric layer causes 20% drop in the thermal performance of heat pipe. However, when the operating fluid was normal water or a mixture of water and ethanol, the temperature difference between the evaporator and the condenser was higher than when pure water used. This was due to the fact that the dual electrical layer led to a disruption in the flow path inside the pipe. Micro heat pipe performance was affected due to the small size of the micro pipe as well as the ions in the fluid, causing a higher temperature difference between the evaporator and condenser sections.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s12217-019-9685-2", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1026232", 
        "issn": [
          "0938-0108", 
          "1875-0494"
        ], 
        "name": "Microgravity Science and Technology", 
        "type": "Periodical"
      }
    ], 
    "name": "Experimental Investigation on Effect of EDL on Heat Transfer of Micro Heat Pipe", 
    "pagination": "1-10", 
    "productId": [
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s12217-019-9685-2"
        ]
      }, 
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "0046105e9eca57bfc10ed9ea3116a4cb0cf00adb12b3b30ca8be422137c38557"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1113199894"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s12217-019-9685-2", 
      "https://app.dimensions.ai/details/publication/pub.1113199894"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-15T09:20", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000376_0000000376/records_56179_00000006.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://link.springer.com/10.1007%2Fs12217-019-9685-2"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s12217-019-9685-2'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s12217-019-9685-2'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s12217-019-9685-2'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s12217-019-9685-2'


 

This table displays all metadata directly associated to this object as RDF triples.

151 TRIPLES      21 PREDICATES      51 URIs      16 LITERALS      5 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s12217-019-9685-2 schema:about anzsrc-for:09
2 anzsrc-for:0915
3 schema:author Ne4411016a26444b8baf7e5f826c039dd
4 schema:citation sg:pub.10.1007/s10483-008-0603-7
5 sg:pub.10.1007/s12217-009-9110-3
6 sg:pub.10.1007/s12217-010-9195-8
7 sg:pub.10.1007/s12217-017-9562-9
8 sg:pub.10.1007/s12217-018-9600-2
9 sg:pub.10.1007/s12217-018-9627-4
10 sg:pub.10.1007/s12648-018-1215-3
11 https://doi.org/10.1006/jcis.2000.7262
12 https://doi.org/10.1006/jcph.2001.6810
13 https://doi.org/10.1016/j.compfluid.2009.09.014
14 https://doi.org/10.1016/j.crme.2009.04.007
15 https://doi.org/10.1016/j.ijheatfluidflow.2004.09.006
16 https://doi.org/10.1016/j.ijheatmasstransfer.2005.01.007
17 https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.115
18 https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.070
19 https://doi.org/10.1016/j.ijmultiphaseflow.2009.11.007
20 https://doi.org/10.1016/j.molliq.2016.05.049
21 https://doi.org/10.1016/j.molliq.2017.01.033
22 https://doi.org/10.1016/s0017-9310(96)00356-0
23 https://doi.org/10.1016/s0026-2714(03)00160-4
24 https://doi.org/10.1016/s0035-3159(98)80089-5
25 https://doi.org/10.1063/1.3295304
26 https://doi.org/10.1088/0960-1317/18/11/115030
27 https://doi.org/10.1108/hff-04-2016-0164
28 https://doi.org/10.1109/icit.2003.1290821
29 https://doi.org/10.3390/e19090481
30 https://doi.org/10.5772/1432
31 schema:datePublished 2019-04-02
32 schema:datePublishedReg 2019-04-02
33 schema:description Due to the reduced dimensions of electronic equipment and the need for thermal management of these equipment, In order to increase efficiency and longevity of component, heat sinks with micro aspects are very important. In this study, heat transfer of micro heat pipe has been studied experimentally. For this purpose, firstly the micro heat pipe that is suitable for industrial conditions and restrictions for the production of very small size triangular section was designed and built. According to the very small size of the primary copper tube, the manufacturing process requires precision and advanced technology. In such a way, at first the samples of fine copper tube available in the market was provided and during the process of heat and tension was brought, at the same time, to the desired thickness and diameter and then by using provided wedge the appropriate cross section is achieved. To apply thermal load, a set of various thermal flux was applied to the evaporator and temperature distribution achieved via five thermocouples which were installed on the body in accordance with the set-up and heat resistance was measured. Water and different solution mixture of water and ethanol were used to investigate effect of the electric double layer heat transfer. It was noticed that the electric double layer of ionized fluid has caused reduction of heat transfer. So that the effect of the double electric layer causes 20% drop in the thermal performance of heat pipe. However, when the operating fluid was normal water or a mixture of water and ethanol, the temperature difference between the evaporator and the condenser was higher than when pure water used. This was due to the fact that the dual electrical layer led to a disruption in the flow path inside the pipe. Micro heat pipe performance was affected due to the small size of the micro pipe as well as the ions in the fluid, causing a higher temperature difference between the evaporator and condenser sections.
34 schema:genre research_article
35 schema:inLanguage en
36 schema:isAccessibleForFree false
37 schema:isPartOf sg:journal.1026232
38 schema:name Experimental Investigation on Effect of EDL on Heat Transfer of Micro Heat Pipe
39 schema:pagination 1-10
40 schema:productId N13b337914cd1418dbc90eb69ef53f8b3
41 N51906df72bc24b16a9b65435788f2b53
42 Naa21464244164528b7a98b4d27ac0f29
43 schema:sameAs https://app.dimensions.ai/details/publication/pub.1113199894
44 https://doi.org/10.1007/s12217-019-9685-2
45 schema:sdDatePublished 2019-04-15T09:20
46 schema:sdLicense https://scigraph.springernature.com/explorer/license/
47 schema:sdPublisher N2622c2a93e4343d984ab9c10caf391ab
48 schema:url https://link.springer.com/10.1007%2Fs12217-019-9685-2
49 sgo:license sg:explorer/license/
50 sgo:sdDataset articles
51 rdf:type schema:ScholarlyArticle
52 N13b337914cd1418dbc90eb69ef53f8b3 schema:name dimensions_id
53 schema:value pub.1113199894
54 rdf:type schema:PropertyValue
55 N2622c2a93e4343d984ab9c10caf391ab schema:name Springer Nature - SN SciGraph project
56 rdf:type schema:Organization
57 N485f70bfd61a46e08111cfbca286d1ed schema:affiliation https://www.grid.ac/institutes/grid.46072.37
58 schema:familyName Shokouhmand
59 schema:givenName Hossein
60 rdf:type schema:Person
61 N51906df72bc24b16a9b65435788f2b53 schema:name readcube_id
62 schema:value 0046105e9eca57bfc10ed9ea3116a4cb0cf00adb12b3b30ca8be422137c38557
63 rdf:type schema:PropertyValue
64 N5e583917ebd1495aa55a74ad8185457b schema:affiliation https://www.grid.ac/institutes/grid.472472.0
65 schema:familyName Fallah Abbasi
66 schema:givenName Maryam
67 rdf:type schema:Person
68 Naa21464244164528b7a98b4d27ac0f29 schema:name doi
69 schema:value 10.1007/s12217-019-9685-2
70 rdf:type schema:PropertyValue
71 Nadc7d128e35e4937ae61a87212c12f6a rdf:first N485f70bfd61a46e08111cfbca286d1ed
72 rdf:rest rdf:nil
73 Ne4411016a26444b8baf7e5f826c039dd rdf:first N5e583917ebd1495aa55a74ad8185457b
74 rdf:rest Nadc7d128e35e4937ae61a87212c12f6a
75 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
76 schema:name Engineering
77 rdf:type schema:DefinedTerm
78 anzsrc-for:0915 schema:inDefinedTermSet anzsrc-for:
79 schema:name Interdisciplinary Engineering
80 rdf:type schema:DefinedTerm
81 sg:journal.1026232 schema:issn 0938-0108
82 1875-0494
83 schema:name Microgravity Science and Technology
84 rdf:type schema:Periodical
85 sg:pub.10.1007/s10483-008-0603-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042059086
86 https://doi.org/10.1007/s10483-008-0603-7
87 rdf:type schema:CreativeWork
88 sg:pub.10.1007/s12217-009-9110-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037267572
89 https://doi.org/10.1007/s12217-009-9110-3
90 rdf:type schema:CreativeWork
91 sg:pub.10.1007/s12217-010-9195-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047183145
92 https://doi.org/10.1007/s12217-010-9195-8
93 rdf:type schema:CreativeWork
94 sg:pub.10.1007/s12217-017-9562-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1092551061
95 https://doi.org/10.1007/s12217-017-9562-9
96 rdf:type schema:CreativeWork
97 sg:pub.10.1007/s12217-018-9600-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1101548295
98 https://doi.org/10.1007/s12217-018-9600-2
99 rdf:type schema:CreativeWork
100 sg:pub.10.1007/s12217-018-9627-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1105010742
101 https://doi.org/10.1007/s12217-018-9627-4
102 rdf:type schema:CreativeWork
103 sg:pub.10.1007/s12648-018-1215-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1103951414
104 https://doi.org/10.1007/s12648-018-1215-3
105 rdf:type schema:CreativeWork
106 https://doi.org/10.1006/jcis.2000.7262 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001825385
107 rdf:type schema:CreativeWork
108 https://doi.org/10.1006/jcph.2001.6810 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022496425
109 rdf:type schema:CreativeWork
110 https://doi.org/10.1016/j.compfluid.2009.09.014 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048604396
111 rdf:type schema:CreativeWork
112 https://doi.org/10.1016/j.crme.2009.04.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021039445
113 rdf:type schema:CreativeWork
114 https://doi.org/10.1016/j.ijheatfluidflow.2004.09.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017512589
115 rdf:type schema:CreativeWork
116 https://doi.org/10.1016/j.ijheatmasstransfer.2005.01.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015186293
117 rdf:type schema:CreativeWork
118 https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.115 schema:sameAs https://app.dimensions.ai/details/publication/pub.1083699673
119 rdf:type schema:CreativeWork
120 https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.070 schema:sameAs https://app.dimensions.ai/details/publication/pub.1085128462
121 rdf:type schema:CreativeWork
122 https://doi.org/10.1016/j.ijmultiphaseflow.2009.11.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013277754
123 rdf:type schema:CreativeWork
124 https://doi.org/10.1016/j.molliq.2016.05.049 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053409735
125 rdf:type schema:CreativeWork
126 https://doi.org/10.1016/j.molliq.2017.01.033 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036008080
127 rdf:type schema:CreativeWork
128 https://doi.org/10.1016/s0017-9310(96)00356-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046988861
129 rdf:type schema:CreativeWork
130 https://doi.org/10.1016/s0026-2714(03)00160-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003595235
131 rdf:type schema:CreativeWork
132 https://doi.org/10.1016/s0035-3159(98)80089-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042848605
133 rdf:type schema:CreativeWork
134 https://doi.org/10.1063/1.3295304 schema:sameAs https://app.dimensions.ai/details/publication/pub.1098561097
135 rdf:type schema:CreativeWork
136 https://doi.org/10.1088/0960-1317/18/11/115030 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039679734
137 rdf:type schema:CreativeWork
138 https://doi.org/10.1108/hff-04-2016-0164 schema:sameAs https://app.dimensions.ai/details/publication/pub.1090548014
139 rdf:type schema:CreativeWork
140 https://doi.org/10.1109/icit.2003.1290821 schema:sameAs https://app.dimensions.ai/details/publication/pub.1095335951
141 rdf:type schema:CreativeWork
142 https://doi.org/10.3390/e19090481 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091509592
143 rdf:type schema:CreativeWork
144 https://doi.org/10.5772/1432 schema:sameAs https://app.dimensions.ai/details/publication/pub.1108384177
145 rdf:type schema:CreativeWork
146 https://www.grid.ac/institutes/grid.46072.37 schema:alternateName University of Tehran
147 schema:name School of Mechanical Engineering, College of Eng. University of Tehran, Tehran, Iran
148 rdf:type schema:Organization
149 https://www.grid.ac/institutes/grid.472472.0 schema:alternateName Islamic Azad University, Science and Research Branch
150 schema:name Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
151 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...