Design for manufacturability of macro and micro products: a case study of heat exchanger design View Full Text


Ontology type: schema:ScholarlyArticle      Open Access: True


Article Info

DATE

2018-08

AUTHORS

F. Omidvarnia, L. Weng Feng, H. N. Hansen, A. Sarhadi, T. A. Lenau, N. H. Mortensen

ABSTRACT

In this paper, a novel methodology in designing a micro heat exchanger is proposed by modifying a conventional design methodology for macro products with the considerations of differences between design of a micro and a macro product. The methodology starts with the identification of differences in design considerations for micro scale products compared to the macro scale. These design considerations consist of material selection, manufacturing process, physical phenomena and shape and geometry design. Manufacturability criteria are defined and various potential manufacturing processes for fabricating micro heat exchangers are ranked based on the defined criteria. Following the design methodology, primary design ideas for micro heat exchangers are generated according to the heat transfer principles for macro heat exchangers. Taking micro design considerations into account, the designs from next iteration are created. Finally, the performances of the designs for micro heat exchangers are compared with their macro counterparts. The most appropriate designs for micro heat exchangers are finalized. The micro specific design guidelines obtained by the designer through evaluating the modeling results and the design criteria are formulated in a knowledge-based unit called “Rules To Consider” (RTC). The proposed methodology provides an interactive design process through the RTC unit. The RTC data is used by the designer in the subsequent iterations of the micro-product design as well as can be used by designers/engineers in design of the same category of micro products. Furthermore, through utilization of the proposed methodology by designers/engineers for design of other micro products, the RTC unit can be enriched with micro-oriented design principles and accordingly provide a basic guideline for design of micro products. More... »

PAGES

995-1006

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s12008-018-0457-9

DOI

http://dx.doi.org/10.1007/s12008-018-0457-9

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1100587819


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0915", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Interdisciplinary Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Technical University of Denmark", 
          "id": "https://www.grid.ac/institutes/grid.5170.3", 
          "name": [
            "Department of Mechanical Engineering, Technical University of Denmark (DTU), 2800, Kongens Lyngby, Denmark"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Omidvarnia", 
        "givenName": "F.", 
        "id": "sg:person.013143407645.11", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013143407645.11"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "National University of Singapore", 
          "id": "https://www.grid.ac/institutes/grid.4280.e", 
          "name": [
            "Department of Mechanical Engineering, Faculty of Engineering, National University of Singapore (NUS), 117576, Singapore, Singapore"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Weng Feng", 
        "givenName": "L.", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Technical University of Denmark", 
          "id": "https://www.grid.ac/institutes/grid.5170.3", 
          "name": [
            "Department of Mechanical Engineering, Technical University of Denmark (DTU), 2800, Kongens Lyngby, Denmark"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Hansen", 
        "givenName": "H. N.", 
        "id": "sg:person.010123404640.40", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010123404640.40"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Technical University of Denmark", 
          "id": "https://www.grid.ac/institutes/grid.5170.3", 
          "name": [
            "Department of Wind Energy, Technical University of Denmark (DTU), 4000, Roskilde, Denmark"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Sarhadi", 
        "givenName": "A.", 
        "id": "sg:person.013763470173.60", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013763470173.60"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Technical University of Denmark", 
          "id": "https://www.grid.ac/institutes/grid.5170.3", 
          "name": [
            "Department of Mechanical Engineering, Technical University of Denmark (DTU), 2800, Kongens Lyngby, Denmark"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Lenau", 
        "givenName": "T. A.", 
        "id": "sg:person.07377147763.52", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07377147763.52"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Technical University of Denmark", 
          "id": "https://www.grid.ac/institutes/grid.5170.3", 
          "name": [
            "Department of Mechanical Engineering, Technical University of Denmark (DTU), 2800, Kongens Lyngby, Denmark"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Mortensen", 
        "givenName": "N. H.", 
        "id": "sg:person.012077167172.41", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012077167172.41"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/s0007-8506(07)61126-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1002152969"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.applthermaleng.2011.03.009", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1019718918"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jmatprotec.2006.03.212", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021858162"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10404-008-0361-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023855029", 
          "https://doi.org/10.1007/s10404-008-0361-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10404-008-0361-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023855029", 
          "https://doi.org/10.1007/s10404-008-0361-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.034", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1025240948"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.mejo.2003.09.010", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026210929"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.mejo.2003.09.010", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026210929"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1088/1742-6596/557/1/012069", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1030330194"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00542-006-0158-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032632469", 
          "https://doi.org/10.1007/s00542-006-0158-3"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00542-006-0158-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032632469", 
          "https://doi.org/10.1007/s00542-006-0158-3"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/0-387-28676-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032761311", 
          "https://doi.org/10.1007/0-387-28676-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/0-387-28676-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032761311", 
          "https://doi.org/10.1007/0-387-28676-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/0-387-28676-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032761311", 
          "https://doi.org/10.1007/0-387-28676-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1033816671", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1033816671", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1080/01457630600559462", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042306445"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-015-7401-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1044281956", 
          "https://doi.org/10.1007/s00170-015-7401-y"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0007-8506(07)60208-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048899332"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/84.896772", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1061240783"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1115/1.1731341", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1062073938"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1115/icnmm2006-96121", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1092986684"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/itherm.2006.1645337", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1094851352"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/eptc.2004.1396580", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1095699223"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/9781118713075", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1107033061"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2018-08", 
    "datePublishedReg": "2018-08-01", 
    "description": "In this paper, a novel methodology in designing a micro heat exchanger is proposed by modifying a conventional design methodology for macro products with the considerations of differences between design of a micro and a macro product. The methodology starts with the identification of differences in design considerations for micro scale products compared to the macro scale. These design considerations consist of material selection, manufacturing process, physical phenomena and shape and geometry design. Manufacturability criteria are defined and various potential manufacturing processes for fabricating micro heat exchangers are ranked based on the defined criteria. Following the design methodology, primary design ideas for micro heat exchangers are generated according to the heat transfer principles for macro heat exchangers. Taking micro design considerations into account, the designs from next iteration are created. Finally, the performances of the designs for micro heat exchangers are compared with their macro counterparts. The most appropriate designs for micro heat exchangers are finalized. The micro specific design guidelines obtained by the designer through evaluating the modeling results and the design criteria are formulated in a knowledge-based unit called \u201cRules To Consider\u201d (RTC). The proposed methodology provides an interactive design process through the RTC unit. The RTC data is used by the designer in the subsequent iterations of the micro-product design as well as can be used by designers/engineers in design of the same category of micro products. Furthermore, through utilization of the proposed methodology by designers/engineers for design of other micro products, the RTC unit can be enriched with micro-oriented design principles and accordingly provide a basic guideline for design of micro products.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s12008-018-0457-9", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": true, 
    "isPartOf": [
      {
        "id": "sg:journal.1136005", 
        "issn": [
          "1955-2513", 
          "1955-2505"
        ], 
        "name": "International Journal on Interactive Design and Manufacturing (IJIDeM)", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "3", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "12"
      }
    ], 
    "name": "Design for manufacturability of macro and micro products: a case study of heat exchanger design", 
    "pagination": "995-1006", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "48f19a12d2656b4f358c0513056c8c0c0eb5569bdf6baf6a4aa32740d3c581a4"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s12008-018-0457-9"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1100587819"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s12008-018-0457-9", 
      "https://app.dimensions.ai/details/publication/pub.1100587819"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T01:22", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8697_00000603.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1007/s12008-018-0457-9"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s12008-018-0457-9'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s12008-018-0457-9'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s12008-018-0457-9'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s12008-018-0457-9'


 

This table displays all metadata directly associated to this object as RDF triples.

159 TRIPLES      21 PREDICATES      46 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s12008-018-0457-9 schema:about anzsrc-for:09
2 anzsrc-for:0915
3 schema:author N3a551cf7398342aa8caf17dbc2c71f7f
4 schema:citation sg:pub.10.1007/0-387-28676-4
5 sg:pub.10.1007/s00170-015-7401-y
6 sg:pub.10.1007/s00542-006-0158-3
7 sg:pub.10.1007/s10404-008-0361-x
8 https://app.dimensions.ai/details/publication/pub.1033816671
9 https://doi.org/10.1002/9781118713075
10 https://doi.org/10.1016/j.applthermaleng.2011.03.009
11 https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.034
12 https://doi.org/10.1016/j.jmatprotec.2006.03.212
13 https://doi.org/10.1016/j.mejo.2003.09.010
14 https://doi.org/10.1016/s0007-8506(07)60208-x
15 https://doi.org/10.1016/s0007-8506(07)61126-3
16 https://doi.org/10.1080/01457630600559462
17 https://doi.org/10.1088/1742-6596/557/1/012069
18 https://doi.org/10.1109/84.896772
19 https://doi.org/10.1109/eptc.2004.1396580
20 https://doi.org/10.1109/itherm.2006.1645337
21 https://doi.org/10.1115/1.1731341
22 https://doi.org/10.1115/icnmm2006-96121
23 schema:datePublished 2018-08
24 schema:datePublishedReg 2018-08-01
25 schema:description In this paper, a novel methodology in designing a micro heat exchanger is proposed by modifying a conventional design methodology for macro products with the considerations of differences between design of a micro and a macro product. The methodology starts with the identification of differences in design considerations for micro scale products compared to the macro scale. These design considerations consist of material selection, manufacturing process, physical phenomena and shape and geometry design. Manufacturability criteria are defined and various potential manufacturing processes for fabricating micro heat exchangers are ranked based on the defined criteria. Following the design methodology, primary design ideas for micro heat exchangers are generated according to the heat transfer principles for macro heat exchangers. Taking micro design considerations into account, the designs from next iteration are created. Finally, the performances of the designs for micro heat exchangers are compared with their macro counterparts. The most appropriate designs for micro heat exchangers are finalized. The micro specific design guidelines obtained by the designer through evaluating the modeling results and the design criteria are formulated in a knowledge-based unit called “Rules To Consider” (RTC). The proposed methodology provides an interactive design process through the RTC unit. The RTC data is used by the designer in the subsequent iterations of the micro-product design as well as can be used by designers/engineers in design of the same category of micro products. Furthermore, through utilization of the proposed methodology by designers/engineers for design of other micro products, the RTC unit can be enriched with micro-oriented design principles and accordingly provide a basic guideline for design of micro products.
26 schema:genre research_article
27 schema:inLanguage en
28 schema:isAccessibleForFree true
29 schema:isPartOf N097ae8e34bbc4bda994990de4d4406b1
30 Na7beafac8d5142fda3e2f741938f19c6
31 sg:journal.1136005
32 schema:name Design for manufacturability of macro and micro products: a case study of heat exchanger design
33 schema:pagination 995-1006
34 schema:productId N8687ef6113f44965828302b9333f0e98
35 N8d62d845ccbd4fdfb966f1fb27c1c2ff
36 Nedaa02cbe13b4e7db65384098bc8a658
37 schema:sameAs https://app.dimensions.ai/details/publication/pub.1100587819
38 https://doi.org/10.1007/s12008-018-0457-9
39 schema:sdDatePublished 2019-04-11T01:22
40 schema:sdLicense https://scigraph.springernature.com/explorer/license/
41 schema:sdPublisher N0c3dce1d0d3545219d8e273909df75b7
42 schema:url http://link.springer.com/10.1007/s12008-018-0457-9
43 sgo:license sg:explorer/license/
44 sgo:sdDataset articles
45 rdf:type schema:ScholarlyArticle
46 N097ae8e34bbc4bda994990de4d4406b1 schema:issueNumber 3
47 rdf:type schema:PublicationIssue
48 N0c3dce1d0d3545219d8e273909df75b7 schema:name Springer Nature - SN SciGraph project
49 rdf:type schema:Organization
50 N0e735f29893b4dfb8d47bf3d32d78127 rdf:first sg:person.010123404640.40
51 rdf:rest Ndef0988535e44e63b88eca02173e9e32
52 N3a551cf7398342aa8caf17dbc2c71f7f rdf:first sg:person.013143407645.11
53 rdf:rest N46e50cc211d744caa8e544818e881b75
54 N46e50cc211d744caa8e544818e881b75 rdf:first Ne5ffb06b5f774de895b500b233b43691
55 rdf:rest N0e735f29893b4dfb8d47bf3d32d78127
56 N5360f18a3018461aa9aa97f074b04e91 rdf:first sg:person.07377147763.52
57 rdf:rest Nb6ce9209782a48b2b7b9e6254511321d
58 N8687ef6113f44965828302b9333f0e98 schema:name readcube_id
59 schema:value 48f19a12d2656b4f358c0513056c8c0c0eb5569bdf6baf6a4aa32740d3c581a4
60 rdf:type schema:PropertyValue
61 N8d62d845ccbd4fdfb966f1fb27c1c2ff schema:name dimensions_id
62 schema:value pub.1100587819
63 rdf:type schema:PropertyValue
64 Na7beafac8d5142fda3e2f741938f19c6 schema:volumeNumber 12
65 rdf:type schema:PublicationVolume
66 Nb6ce9209782a48b2b7b9e6254511321d rdf:first sg:person.012077167172.41
67 rdf:rest rdf:nil
68 Ndef0988535e44e63b88eca02173e9e32 rdf:first sg:person.013763470173.60
69 rdf:rest N5360f18a3018461aa9aa97f074b04e91
70 Ne5ffb06b5f774de895b500b233b43691 schema:affiliation https://www.grid.ac/institutes/grid.4280.e
71 schema:familyName Weng Feng
72 schema:givenName L.
73 rdf:type schema:Person
74 Nedaa02cbe13b4e7db65384098bc8a658 schema:name doi
75 schema:value 10.1007/s12008-018-0457-9
76 rdf:type schema:PropertyValue
77 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
78 schema:name Engineering
79 rdf:type schema:DefinedTerm
80 anzsrc-for:0915 schema:inDefinedTermSet anzsrc-for:
81 schema:name Interdisciplinary Engineering
82 rdf:type schema:DefinedTerm
83 sg:journal.1136005 schema:issn 1955-2505
84 1955-2513
85 schema:name International Journal on Interactive Design and Manufacturing (IJIDeM)
86 rdf:type schema:Periodical
87 sg:person.010123404640.40 schema:affiliation https://www.grid.ac/institutes/grid.5170.3
88 schema:familyName Hansen
89 schema:givenName H. N.
90 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010123404640.40
91 rdf:type schema:Person
92 sg:person.012077167172.41 schema:affiliation https://www.grid.ac/institutes/grid.5170.3
93 schema:familyName Mortensen
94 schema:givenName N. H.
95 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012077167172.41
96 rdf:type schema:Person
97 sg:person.013143407645.11 schema:affiliation https://www.grid.ac/institutes/grid.5170.3
98 schema:familyName Omidvarnia
99 schema:givenName F.
100 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013143407645.11
101 rdf:type schema:Person
102 sg:person.013763470173.60 schema:affiliation https://www.grid.ac/institutes/grid.5170.3
103 schema:familyName Sarhadi
104 schema:givenName A.
105 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013763470173.60
106 rdf:type schema:Person
107 sg:person.07377147763.52 schema:affiliation https://www.grid.ac/institutes/grid.5170.3
108 schema:familyName Lenau
109 schema:givenName T. A.
110 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07377147763.52
111 rdf:type schema:Person
112 sg:pub.10.1007/0-387-28676-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032761311
113 https://doi.org/10.1007/0-387-28676-4
114 rdf:type schema:CreativeWork
115 sg:pub.10.1007/s00170-015-7401-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1044281956
116 https://doi.org/10.1007/s00170-015-7401-y
117 rdf:type schema:CreativeWork
118 sg:pub.10.1007/s00542-006-0158-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032632469
119 https://doi.org/10.1007/s00542-006-0158-3
120 rdf:type schema:CreativeWork
121 sg:pub.10.1007/s10404-008-0361-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1023855029
122 https://doi.org/10.1007/s10404-008-0361-x
123 rdf:type schema:CreativeWork
124 https://app.dimensions.ai/details/publication/pub.1033816671 schema:CreativeWork
125 https://doi.org/10.1002/9781118713075 schema:sameAs https://app.dimensions.ai/details/publication/pub.1107033061
126 rdf:type schema:CreativeWork
127 https://doi.org/10.1016/j.applthermaleng.2011.03.009 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019718918
128 rdf:type schema:CreativeWork
129 https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.034 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025240948
130 rdf:type schema:CreativeWork
131 https://doi.org/10.1016/j.jmatprotec.2006.03.212 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021858162
132 rdf:type schema:CreativeWork
133 https://doi.org/10.1016/j.mejo.2003.09.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026210929
134 rdf:type schema:CreativeWork
135 https://doi.org/10.1016/s0007-8506(07)60208-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1048899332
136 rdf:type schema:CreativeWork
137 https://doi.org/10.1016/s0007-8506(07)61126-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002152969
138 rdf:type schema:CreativeWork
139 https://doi.org/10.1080/01457630600559462 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042306445
140 rdf:type schema:CreativeWork
141 https://doi.org/10.1088/1742-6596/557/1/012069 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030330194
142 rdf:type schema:CreativeWork
143 https://doi.org/10.1109/84.896772 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061240783
144 rdf:type schema:CreativeWork
145 https://doi.org/10.1109/eptc.2004.1396580 schema:sameAs https://app.dimensions.ai/details/publication/pub.1095699223
146 rdf:type schema:CreativeWork
147 https://doi.org/10.1109/itherm.2006.1645337 schema:sameAs https://app.dimensions.ai/details/publication/pub.1094851352
148 rdf:type schema:CreativeWork
149 https://doi.org/10.1115/1.1731341 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062073938
150 rdf:type schema:CreativeWork
151 https://doi.org/10.1115/icnmm2006-96121 schema:sameAs https://app.dimensions.ai/details/publication/pub.1092986684
152 rdf:type schema:CreativeWork
153 https://www.grid.ac/institutes/grid.4280.e schema:alternateName National University of Singapore
154 schema:name Department of Mechanical Engineering, Faculty of Engineering, National University of Singapore (NUS), 117576, Singapore, Singapore
155 rdf:type schema:Organization
156 https://www.grid.ac/institutes/grid.5170.3 schema:alternateName Technical University of Denmark
157 schema:name Department of Mechanical Engineering, Technical University of Denmark (DTU), 2800, Kongens Lyngby, Denmark
158 Department of Wind Energy, Technical University of Denmark (DTU), 4000, Roskilde, Denmark
159 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...