Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2004-10

AUTHORS

Li-Piin Sung, Joan Jasmin, Xiaohong Gu, Tinh Nguyen, Jonathan W. Martin

ABSTRACT

Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process More... »

PAGES

267-276

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s11998-004-0029-8

DOI

http://dx.doi.org/10.1007/s11998-004-0029-8

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1000888960


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "National Institute of Standards and Technology", 
          "id": "https://www.grid.ac/institutes/grid.94225.38", 
          "name": [
            "Polymeric Materials Group, Building and Fire Research Laboratory, National Institute of Standards and Technology, 20899-8615, Gaithersburg, MD"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Sung", 
        "givenName": "Li-Piin", 
        "id": "sg:person.010421277673.86", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010421277673.86"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "National Institute of Standards and Technology", 
          "id": "https://www.grid.ac/institutes/grid.94225.38", 
          "name": [
            "Polymeric Materials Group, Building and Fire Research Laboratory, National Institute of Standards and Technology, 20899-8615, Gaithersburg, MD"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Jasmin", 
        "givenName": "Joan", 
        "id": "sg:person.013657171510.51", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013657171510.51"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "National Institute of Standards and Technology", 
          "id": "https://www.grid.ac/institutes/grid.94225.38", 
          "name": [
            "Polymeric Materials Group, Building and Fire Research Laboratory, National Institute of Standards and Technology, 20899-8615, Gaithersburg, MD"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Gu", 
        "givenName": "Xiaohong", 
        "id": "sg:person.014036357212.92", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014036357212.92"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "National Institute of Standards and Technology", 
          "id": "https://www.grid.ac/institutes/grid.94225.38", 
          "name": [
            "Polymeric Materials Group, Building and Fire Research Laboratory, National Institute of Standards and Technology, 20899-8615, Gaithersburg, MD"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Nguyen", 
        "givenName": "Tinh", 
        "id": "sg:person.010651314036.14", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010651314036.14"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "National Institute of Standards and Technology", 
          "id": "https://www.grid.ac/institutes/grid.94225.38", 
          "name": [
            "Polymeric Materials Group, Building and Fire Research Laboratory, National Institute of Standards and Technology, 20899-8615, Gaithersburg, MD"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Martin", 
        "givenName": "Jonathan W.", 
        "id": "sg:person.011706165644.45", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011706165644.45"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/bf02720522", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018692902", 
          "https://doi.org/10.1007/bf02720522"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02720522", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018692902", 
          "https://doi.org/10.1007/bf02720522"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0141-3910(01)00218-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027797847"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0300-9440(01)00152-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1033281387"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02720155", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034111790", 
          "https://doi.org/10.1007/bf02720155"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02720155", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034111790", 
          "https://doi.org/10.1007/bf02720155"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02697975", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035601279", 
          "https://doi.org/10.1007/bf02697975"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02697975", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035601279", 
          "https://doi.org/10.1007/bf02697975"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02720133", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041421586", 
          "https://doi.org/10.1007/bf02720133"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02720133", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041421586", 
          "https://doi.org/10.1007/bf02720133"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02697921", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042204244", 
          "https://doi.org/10.1007/bf02697921"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02697921", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042204244", 
          "https://doi.org/10.1007/bf02697921"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0141-3910(97)00279-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1047270768"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0141-3910(96)00076-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1053016559"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1364/ao.40.002159", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1065116392"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2004-10", 
    "datePublishedReg": "2004-10-01", 
    "description": "Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s11998-004-0029-8", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1320084", 
        "issn": [
          "1945-9645", 
          "2168-8028"
        ], 
        "name": "Journal of Coatings Technology and Research", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "4", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "1"
      }
    ], 
    "name": "Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings", 
    "pagination": "267-276", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "043bfd44a5155cf1f3bf04a1384ffe396ac76405ff444090a4892a8f48de557d"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s11998-004-0029-8"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1000888960"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s11998-004-0029-8", 
      "https://app.dimensions.ai/details/publication/pub.1000888960"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-10T20:48", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8684_00000519.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1007%2Fs11998-004-0029-8"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11998-004-0029-8'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11998-004-0029-8'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11998-004-0029-8'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11998-004-0029-8'


 

This table displays all metadata directly associated to this object as RDF triples.

124 TRIPLES      21 PREDICATES      37 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s11998-004-0029-8 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author Neeabba59731e43adaf6269d5e84a863c
4 schema:citation sg:pub.10.1007/bf02697921
5 sg:pub.10.1007/bf02697975
6 sg:pub.10.1007/bf02720133
7 sg:pub.10.1007/bf02720155
8 sg:pub.10.1007/bf02720522
9 https://doi.org/10.1016/0141-3910(96)00076-6
10 https://doi.org/10.1016/s0141-3910(01)00218-x
11 https://doi.org/10.1016/s0141-3910(97)00279-6
12 https://doi.org/10.1016/s0300-9440(01)00152-7
13 https://doi.org/10.1364/ao.40.002159
14 schema:datePublished 2004-10
15 schema:datePublishedReg 2004-10-01
16 schema:description Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process
17 schema:genre research_article
18 schema:inLanguage en
19 schema:isAccessibleForFree false
20 schema:isPartOf N1894bfae2f8b456687569278f72058c0
21 Nc34ed97a014346ea81faaf61c8242113
22 sg:journal.1320084
23 schema:name Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings
24 schema:pagination 267-276
25 schema:productId N1320948ccea3442697f383bcaa3370a8
26 Ndb8a07a03a774225830e00aa366fd2e7
27 Ne563787ec7b64a19b2a76a459a73017d
28 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000888960
29 https://doi.org/10.1007/s11998-004-0029-8
30 schema:sdDatePublished 2019-04-10T20:48
31 schema:sdLicense https://scigraph.springernature.com/explorer/license/
32 schema:sdPublisher N5717b9d1e3794c8ab4a3f1e273a069ef
33 schema:url http://link.springer.com/10.1007%2Fs11998-004-0029-8
34 sgo:license sg:explorer/license/
35 sgo:sdDataset articles
36 rdf:type schema:ScholarlyArticle
37 N02a32b4eda5d43bd870df31e2addbdc8 rdf:first sg:person.010651314036.14
38 rdf:rest N0cd0cb3c9e8d4b9bbc4b689f40262470
39 N0cd0cb3c9e8d4b9bbc4b689f40262470 rdf:first sg:person.011706165644.45
40 rdf:rest rdf:nil
41 N1320948ccea3442697f383bcaa3370a8 schema:name doi
42 schema:value 10.1007/s11998-004-0029-8
43 rdf:type schema:PropertyValue
44 N1894bfae2f8b456687569278f72058c0 schema:issueNumber 4
45 rdf:type schema:PublicationIssue
46 N5717b9d1e3794c8ab4a3f1e273a069ef schema:name Springer Nature - SN SciGraph project
47 rdf:type schema:Organization
48 N7450a340267f4757a8e698502bac7767 rdf:first sg:person.014036357212.92
49 rdf:rest N02a32b4eda5d43bd870df31e2addbdc8
50 N8d9eabcf815d448488782c64d667619a rdf:first sg:person.013657171510.51
51 rdf:rest N7450a340267f4757a8e698502bac7767
52 Nc34ed97a014346ea81faaf61c8242113 schema:volumeNumber 1
53 rdf:type schema:PublicationVolume
54 Ndb8a07a03a774225830e00aa366fd2e7 schema:name readcube_id
55 schema:value 043bfd44a5155cf1f3bf04a1384ffe396ac76405ff444090a4892a8f48de557d
56 rdf:type schema:PropertyValue
57 Ne563787ec7b64a19b2a76a459a73017d schema:name dimensions_id
58 schema:value pub.1000888960
59 rdf:type schema:PropertyValue
60 Neeabba59731e43adaf6269d5e84a863c rdf:first sg:person.010421277673.86
61 rdf:rest N8d9eabcf815d448488782c64d667619a
62 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
63 schema:name Engineering
64 rdf:type schema:DefinedTerm
65 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
66 schema:name Materials Engineering
67 rdf:type schema:DefinedTerm
68 sg:journal.1320084 schema:issn 1945-9645
69 2168-8028
70 schema:name Journal of Coatings Technology and Research
71 rdf:type schema:Periodical
72 sg:person.010421277673.86 schema:affiliation https://www.grid.ac/institutes/grid.94225.38
73 schema:familyName Sung
74 schema:givenName Li-Piin
75 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010421277673.86
76 rdf:type schema:Person
77 sg:person.010651314036.14 schema:affiliation https://www.grid.ac/institutes/grid.94225.38
78 schema:familyName Nguyen
79 schema:givenName Tinh
80 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010651314036.14
81 rdf:type schema:Person
82 sg:person.011706165644.45 schema:affiliation https://www.grid.ac/institutes/grid.94225.38
83 schema:familyName Martin
84 schema:givenName Jonathan W.
85 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011706165644.45
86 rdf:type schema:Person
87 sg:person.013657171510.51 schema:affiliation https://www.grid.ac/institutes/grid.94225.38
88 schema:familyName Jasmin
89 schema:givenName Joan
90 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013657171510.51
91 rdf:type schema:Person
92 sg:person.014036357212.92 schema:affiliation https://www.grid.ac/institutes/grid.94225.38
93 schema:familyName Gu
94 schema:givenName Xiaohong
95 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014036357212.92
96 rdf:type schema:Person
97 sg:pub.10.1007/bf02697921 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042204244
98 https://doi.org/10.1007/bf02697921
99 rdf:type schema:CreativeWork
100 sg:pub.10.1007/bf02697975 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035601279
101 https://doi.org/10.1007/bf02697975
102 rdf:type schema:CreativeWork
103 sg:pub.10.1007/bf02720133 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041421586
104 https://doi.org/10.1007/bf02720133
105 rdf:type schema:CreativeWork
106 sg:pub.10.1007/bf02720155 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034111790
107 https://doi.org/10.1007/bf02720155
108 rdf:type schema:CreativeWork
109 sg:pub.10.1007/bf02720522 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018692902
110 https://doi.org/10.1007/bf02720522
111 rdf:type schema:CreativeWork
112 https://doi.org/10.1016/0141-3910(96)00076-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053016559
113 rdf:type schema:CreativeWork
114 https://doi.org/10.1016/s0141-3910(01)00218-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1027797847
115 rdf:type schema:CreativeWork
116 https://doi.org/10.1016/s0141-3910(97)00279-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047270768
117 rdf:type schema:CreativeWork
118 https://doi.org/10.1016/s0300-9440(01)00152-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033281387
119 rdf:type schema:CreativeWork
120 https://doi.org/10.1364/ao.40.002159 schema:sameAs https://app.dimensions.ai/details/publication/pub.1065116392
121 rdf:type schema:CreativeWork
122 https://www.grid.ac/institutes/grid.94225.38 schema:alternateName National Institute of Standards and Technology
123 schema:name Polymeric Materials Group, Building and Fire Research Laboratory, National Institute of Standards and Technology, 20899-8615, Gaithersburg, MD
124 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...