Ontology type: schema:ScholarlyArticle
2018-03
AUTHORSAshish Kumar Singh, Brooks Saltonstall, Balu Patil, Niklas Hoffmann, Mrityunjay Doddamani, Nikhil Gupta
ABSTRACTHigh-density polyethylene (HDPE) and its fly ash cenosphere-filled syntactic foam filaments have been recently developed. These filaments are used for three-dimensional (3D) printing using a commercial printer. The developed syntactic foam filament (HDPE40) contains 40 wt.% cenospheres in the HDPE matrix. Printing parameters for HDPE and HDPE40 were optimized for use in widely available commercial printers, and specimens were three-dimensionally (3D) printed for tensile testing at strain rate of 10−3 s−1. Process optimization resulted in smooth operation of the 3D printer without nozzle clogging or cenosphere fracture during the printing process. Characterization results revealed that the tensile modulus values of 3D-printed HDPE and HDPE40 specimens were higher than those of injection-molded specimens, while the tensile strength was comparable, but the fracture strain and density were lower. More... »
PAGES310-314
http://scigraph.springernature.com/pub.10.1007/s11837-017-2731-x
DOIhttp://dx.doi.org/10.1007/s11837-017-2731-x
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1100424880
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "New York University",
"id": "https://www.grid.ac/institutes/grid.137628.9",
"name": [
"Composite Materials and Mechanics Laboratory, Mechanical and Aerospace Engineering Department, New York University, Tandon School of Engineering, 11201, Brooklyn, NY, USA"
],
"type": "Organization"
},
"familyName": "Singh",
"givenName": "Ashish Kumar",
"id": "sg:person.013367045075.09",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013367045075.09"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "New York University",
"id": "https://www.grid.ac/institutes/grid.137628.9",
"name": [
"Composite Materials and Mechanics Laboratory, Mechanical and Aerospace Engineering Department, New York University, Tandon School of Engineering, 11201, Brooklyn, NY, USA"
],
"type": "Organization"
},
"familyName": "Saltonstall",
"givenName": "Brooks",
"id": "sg:person.012277237264.42",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012277237264.42"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "National Institute of Technology Karnataka",
"id": "https://www.grid.ac/institutes/grid.444525.6",
"name": [
"Advanced Manufacturing Laboratory, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, India"
],
"type": "Organization"
},
"familyName": "Patil",
"givenName": "Balu",
"id": "sg:person.07363311564.98",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07363311564.98"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Clausthal University of Technology",
"id": "https://www.grid.ac/institutes/grid.5164.6",
"name": [
"Institut f\u00fcr Maschinenwesen, Technische Universit\u00e4t Clausthal, Clausthal, Zellerfeld, Germany"
],
"type": "Organization"
},
"familyName": "Hoffmann",
"givenName": "Niklas",
"id": "sg:person.014541535164.54",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014541535164.54"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "National Institute of Technology Karnataka",
"id": "https://www.grid.ac/institutes/grid.444525.6",
"name": [
"Advanced Manufacturing Laboratory, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, India"
],
"type": "Organization"
},
"familyName": "Doddamani",
"givenName": "Mrityunjay",
"id": "sg:person.011144053003.98",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011144053003.98"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "New York University",
"id": "https://www.grid.ac/institutes/grid.137628.9",
"name": [
"Composite Materials and Mechanics Laboratory, Mechanical and Aerospace Engineering Department, New York University, Tandon School of Engineering, 11201, Brooklyn, NY, USA"
],
"type": "Organization"
},
"familyName": "Gupta",
"givenName": "Nikhil",
"id": "sg:person.01030376555.41",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01030376555.41"
],
"type": "Person"
}
],
"citation": [
{
"id": "sg:pub.10.1007/s11837-016-1912-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1004181864",
"https://doi.org/10.1007/s11837-016-1912-3"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s10853-012-6452-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1006674981",
"https://doi.org/10.1007/s10853-012-6452-9"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matdes.2015.12.052",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010485993"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matdes.2015.12.052",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010485993"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matdes.2015.12.052",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010485993"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matdes.2015.12.052",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010485993"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11837-013-0796-8",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1012969285",
"https://doi.org/10.1007/s11837-013-0796-8"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.dib.2016.01.058",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1032030649"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2007.05.028",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1043244829"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/app.10915",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1043387382"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/pen.760240605",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050206709"
],
"type": "CreativeWork"
},
{
"id": "https://app.dimensions.ai/details/publication/pub.1051248940",
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/978-3-319-01243-8",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1051248940",
"https://doi.org/10.1007/978-3-319-01243-8"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/978-3-319-01243-8",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1051248940",
"https://doi.org/10.1007/978-3-319-01243-8"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.sna.2017.07.020",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1090669374"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.compositesb.2017.07.037",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1090946797"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11837-017-2734-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1100622911",
"https://doi.org/10.1007/s11837-017-2734-7"
],
"type": "CreativeWork"
}
],
"datePublished": "2018-03",
"datePublishedReg": "2018-03-01",
"description": "High-density polyethylene (HDPE) and its fly ash cenosphere-filled syntactic foam filaments have been recently developed. These filaments are used for three-dimensional (3D) printing using a commercial printer. The developed syntactic foam filament (HDPE40) contains 40 wt.% cenospheres in the HDPE matrix. Printing parameters for HDPE and HDPE40 were optimized for use in widely available commercial printers, and specimens were three-dimensionally (3D) printed for tensile testing at strain rate of 10\u22123 s\u22121. Process optimization resulted in smooth operation of the 3D printer without nozzle clogging or cenosphere fracture during the printing process. Characterization results revealed that the tensile modulus values of 3D-printed HDPE and HDPE40 specimens were higher than those of injection-molded specimens, while the tensile strength was comparable, but the fracture strain and density were lower.",
"genre": "research_article",
"id": "sg:pub.10.1007/s11837-017-2731-x",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1042541",
"issn": [
"1047-4838",
"1543-1851"
],
"name": "JOM",
"type": "Periodical"
},
{
"issueNumber": "3",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "70"
}
],
"name": "Additive Manufacturing of Syntactic Foams: Part 2: Specimen Printing and Mechanical Property Characterization",
"pagination": "310-314",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"52df016bc1e3c4b5bea5248f9a3936c6f1bdc448033f84c944e2ce7e7dc437f2"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s11837-017-2731-x"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1100424880"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s11837-017-2731-x",
"https://app.dimensions.ai/details/publication/pub.1100424880"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-10T18:16",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8675_00000493.jsonl",
"type": "ScholarlyArticle",
"url": "http://link.springer.com/10.1007/s11837-017-2731-x"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11837-017-2731-x'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11837-017-2731-x'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11837-017-2731-x'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11837-017-2731-x'
This table displays all metadata directly associated to this object as RDF triples.
145 TRIPLES
21 PREDICATES
40 URIs
19 LITERALS
7 BLANK NODES