Ontology type: schema:ScholarlyArticle
2019-03-25
AUTHORSThomas Bergs, Lothar Chrubasik, Timm Petersen, Andreas Klink, Fritz Klocke
ABSTRACTThe generator technology of electrical discharge machining (EDM) has evolved significantly over the last decades. This enabled EDM to become a crucial technology in die and mold manufacturing. Moreover, EDM became a more important technology due to the enhanced power efficiency, process-based power dissipation and control strategies especially for tools made from hard materials like cemented carbides. Even though, EDM is considered a standard process for this application today, cemented carbide tools still suffer from premature failure. This is often due to thermally affected rim zones resulting from the EDM processes. Thus, the formation of cracks and white layer should be investigated for contemporary EDM technology. To get a better understanding of the impact of the machining process different cemented carbide grades need to be compared. Therefore in this paper, four kinds of cemented carbides, three versions with normal binder phase content and a variant almost binder free, are analyzed. The materials are machined using roughing and finishing technologies. Then the materials are investigated under the specific consideration of the machined surface integrity of sinking EDM. More... »
PAGES1-7
http://scigraph.springernature.com/pub.10.1007/s11740-019-00896-1
DOIhttp://dx.doi.org/10.1007/s11740-019-00896-1
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1112991646
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "RWTH Aachen University",
"id": "https://www.grid.ac/institutes/grid.1957.a",
"name": [
"Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany"
],
"type": "Organization"
},
"familyName": "Bergs",
"givenName": "Thomas",
"type": "Person"
},
{
"affiliation": {
"alternateName": "RWTH Aachen University",
"id": "https://www.grid.ac/institutes/grid.1957.a",
"name": [
"Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany"
],
"type": "Organization"
},
"familyName": "Chrubasik",
"givenName": "Lothar",
"type": "Person"
},
{
"affiliation": {
"alternateName": "RWTH Aachen University",
"id": "https://www.grid.ac/institutes/grid.1957.a",
"name": [
"Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany"
],
"type": "Organization"
},
"familyName": "Petersen",
"givenName": "Timm",
"type": "Person"
},
{
"affiliation": {
"alternateName": "RWTH Aachen University",
"id": "https://www.grid.ac/institutes/grid.1957.a",
"name": [
"Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany"
],
"type": "Organization"
},
"familyName": "Klink",
"givenName": "Andreas",
"type": "Person"
},
{
"affiliation": {
"alternateName": "RWTH Aachen University",
"id": "https://www.grid.ac/institutes/grid.1957.a",
"name": [
"Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany"
],
"type": "Organization"
},
"familyName": "Klocke",
"givenName": "Fritz",
"type": "Person"
}
],
"citation": [
{
"id": "sg:pub.10.1007/s00170-007-1307-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002903131",
"https://doi.org/10.1007/s00170-007-1307-2"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-007-1307-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002903131",
"https://doi.org/10.1007/s00170-007-1307-2"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1111/j.1551-2916.2004.01687.x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1003607007"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2004.02.037",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1005222453"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.procir.2016.03.209",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1005678584"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1590/s1678-58782010000500009",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1007619321"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijrmhm.2005.04.007",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1008395710"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2008.09.015",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010236001"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijrmhm.2008.09.002",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1011055233"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/mawe.200900529",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014680782"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/mawe.200900529",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014680782"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.procir.2016.02.261",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1019294204"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.3923/jas.2011.1784.1790",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1019975363"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0007-8506(07)60020-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020484085"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2007.12.056",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1023686914"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0043-1648(87)90269-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1027828377"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0043-1648(87)90269-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1027828377"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0007-8506(07)60906-8",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1029964420"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0924-0136(01)00992-x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030056655"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2004.04.346",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1031929763"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.procir.2016.04.008",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1035038394"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11740-012-0373-y",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036772107",
"https://doi.org/10.1007/s11740-012-0373-y"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11740-012-0373-y",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036772107",
"https://doi.org/10.1007/s11740-012-0373-y"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11740-013-0522-y",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1037687544",
"https://doi.org/10.1007/s11740-013-0522-y"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0254-0584(99)00152-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1038378371"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-008-1796-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1038838061",
"https://doi.org/10.1007/s00170-008-1796-7"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-008-1796-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1038838061",
"https://doi.org/10.1007/s00170-008-1796-7"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijmachtools.2011.08.016",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1039027428"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1111/j.1151-2916.1989.tb07660.x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1042420865"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.proeng.2011.11.108",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1051452390"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.cirp.2015.05.002",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1051639215"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1179/095066079790136363",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1064103518"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.4028/www.scientific.net/kem.611-612.708",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1072092737"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.cirp.2017.04.137",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1085134672"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijrmhm.2017.12.019",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1099687127"
],
"type": "CreativeWork"
}
],
"datePublished": "2019-03-25",
"datePublishedReg": "2019-03-25",
"description": "The generator technology of electrical discharge machining (EDM) has evolved significantly over the last decades. This enabled EDM to become a crucial technology in die and mold manufacturing. Moreover, EDM became a more important technology due to the enhanced power efficiency, process-based power dissipation and control strategies especially for tools made from hard materials like cemented carbides. Even though, EDM is considered a standard process for this application today, cemented carbide tools still suffer from premature failure. This is often due to thermally affected rim zones resulting from the EDM processes. Thus, the formation of cracks and white layer should be investigated for contemporary EDM technology. To get a better understanding of the impact of the machining process different cemented carbide grades need to be compared. Therefore in this paper, four kinds of cemented carbides, three versions with normal binder phase content and a variant almost binder free, are analyzed. The materials are machined using roughing and finishing technologies. Then the materials are investigated under the specific consideration of the machined surface integrity of sinking EDM.",
"genre": "research_article",
"id": "sg:pub.10.1007/s11740-019-00896-1",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1136430",
"issn": [
"0944-6524",
"1863-7353"
],
"name": "Production Engineering",
"type": "Periodical"
}
],
"name": "Experimental analysis of surface integrity of cemented carbides resulting from contemporary sinking EDM technology",
"pagination": "1-7",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"f19811cf92a874cca43b712d6e9aad29f72b2798b6dd693bfc3ff88735485a9e"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s11740-019-00896-1"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1112991646"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s11740-019-00896-1",
"https://app.dimensions.ai/details/publication/pub.1112991646"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-11T13:05",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000366_0000000366/records_112069_00000001.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.1007%2Fs11740-019-00896-1"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00896-1'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00896-1'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00896-1'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00896-1'
This table displays all metadata directly associated to this object as RDF triples.
172 TRIPLES
21 PREDICATES
54 URIs
16 LITERALS
5 BLANK NODES