Ontology type: schema:ScholarlyArticle
2019-03-28
AUTHORSA. Gloria, M. Martorelli, S. Gerbino, F. Tagliaferri, V. Kräusel, A. Lanzotti
ABSTRACTLight activated composites are the most popular choice in the field of dental restoration. They generally show internal stress even after a prolonged time period. The knowledge of mechanical properties and residual stress should provide interesting information on the clinical performance of such materials. Accordingly, in the current research experimental analyses were carried out to assess the effect of the curing process on the properties of one of the most commonly employed light activated dental composites (Gradia Direct—GC Corporation, Japan). At 10 min, 1 h and 24 h after light curing, the bending modulus (4.7–6.2 GPa) as well as the punching performance (peak load of 12.1–17.5 N) were evaluated for the micro-hybrid composite. Scanning electron microscopy also allowed to analyze the fracture surface. Residual stresses ranging from 0.67 ± 0.15 MPa to 1.12 ± 0.17 MPa were measured by means of the thin-ring-slitting approach reported in the literature, according to measurement time and cutting time. More... »
PAGES1-8
http://scigraph.springernature.com/pub.10.1007/s11740-019-00895-2
DOIhttp://dx.doi.org/10.1007/s11740-019-00895-2
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1113048346
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "National Research Council",
"id": "https://www.grid.ac/institutes/grid.5326.2",
"name": [
"Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy"
],
"type": "Organization"
},
"familyName": "Gloria",
"givenName": "A.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Naples Federico II",
"id": "https://www.grid.ac/institutes/grid.4691.a",
"name": [
"Department of Industrial Engineering, Fraunhofer JL IDEAS, University of Naples Federico II, Naples, Italy"
],
"type": "Organization"
},
"familyName": "Martorelli",
"givenName": "M.",
"type": "Person"
},
{
"affiliation": {
"name": [
"Department of Engineering, University of Campania \u201cLuigi Vanvitelli\u201d, Aversa, CE, Italy"
],
"type": "Organization"
},
"familyName": "Gerbino",
"givenName": "S.",
"type": "Person"
},
{
"affiliation": {
"name": [
"Niccol\u00f2 Cusano University, Rome, Italy"
],
"type": "Organization"
},
"familyName": "Tagliaferri",
"givenName": "F.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Chemnitz University of Technology",
"id": "https://www.grid.ac/institutes/grid.6810.f",
"name": [
"Institute for Machine Tools and Production Processes, Chemnitz University of Technology, Chemnitz, Germany"
],
"type": "Organization"
},
"familyName": "Kr\u00e4usel",
"givenName": "V.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Naples Federico II",
"id": "https://www.grid.ac/institutes/grid.4691.a",
"name": [
"Department of Industrial Engineering, Fraunhofer JL IDEAS, University of Naples Federico II, Naples, Italy"
],
"type": "Organization"
},
"familyName": "Lanzotti",
"givenName": "A.",
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.1111/j.1600-0722.1991.tb01052.x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1000425914"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0022-3913(03)00277-4",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1003588524"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0022-3913(03)00277-4",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1003588524"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.dental.2003.05.006",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1008438446"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.dental.2003.05.006",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1008438446"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jdent.2005.02.005",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010889416"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.dental.2005.03.006",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1013483911"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.dental.2004.10.004",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1018426450"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.dental.2010.05.004",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1024720515"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.dental.2003.05.007",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1025337736"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.dental.2003.05.007",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1025337736"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1111/j.1747-1567.2002.tb00062.x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1025533173",
"https://doi.org/10.1111/j.1747-1567.2002.tb00062.x"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1111/j.1747-1567.2002.tb00062.x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1025533173",
"https://doi.org/10.1111/j.1747-1567.2002.tb00062.x"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/pc.22446",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1029669408"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0109-5641(98)00036-0",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1038476801"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.14219/jada.archive.2003.0258",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1039350327"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1098/rsif.2012.0833",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1043565810"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1177/154405910608501015",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1048706776"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1177/154405910608501015",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1048706776"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1111/j.1365-2516.1995.tb00111.x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049869163"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.biomaterials.2004.08.025",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1053528889"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1177/00220345840630121101",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1063638716"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1177/00220345840630121101",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1063638716"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1177/00220345900690060301",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1063639887"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1177/00220345900690060301",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1063639887"
],
"type": "CreativeWork"
},
{
"id": "https://app.dimensions.ai/details/publication/pub.1074885483",
"type": "CreativeWork"
},
{
"id": "https://app.dimensions.ai/details/publication/pub.1076587126",
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.5301/jabb.2010.6094",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1078351883"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.5301/jabb.2010.6094",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1078351883"
],
"type": "CreativeWork"
},
{
"id": "https://app.dimensions.ai/details/publication/pub.1079760179",
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.3390/ma11040504",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1101773440"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msec.2018.07.051",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1105707790"
],
"type": "CreativeWork"
}
],
"datePublished": "2019-03-28",
"datePublishedReg": "2019-03-28",
"description": "Light activated composites are the most popular choice in the field of dental restoration. They generally show internal stress even after a prolonged time period. The knowledge of mechanical properties and residual stress should provide interesting information on the clinical performance of such materials. Accordingly, in the current research experimental analyses were carried out to assess the effect of the curing process on the properties of one of the most commonly employed light activated dental composites (Gradia Direct\u2014GC Corporation, Japan). At 10 min, 1 h and 24 h after light curing, the bending modulus (4.7\u20136.2 GPa) as well as the punching performance (peak load of 12.1\u201317.5 N) were evaluated for the micro-hybrid composite. Scanning electron microscopy also allowed to analyze the fracture surface. Residual stresses ranging from 0.67 \u00b1 0.15 MPa to 1.12 \u00b1 0.17 MPa were measured by means of the thin-ring-slitting approach reported in the literature, according to measurement time and cutting time.",
"genre": "research_article",
"id": "sg:pub.10.1007/s11740-019-00895-2",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1136430",
"issn": [
"0944-6524",
"1863-7353"
],
"name": "Production Engineering",
"type": "Periodical"
},
{
"issueNumber": "2",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "13"
}
],
"name": "Functional analyses to assess the effect of the curing process on the properties of light activated composites",
"pagination": "1-8",
"productId": [
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s11740-019-00895-2"
]
},
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"dc61ffa91a174f31bf0239d86f5a3183b8ea40ee8ee47bf451e7d7d2e4ee7142"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1113048346"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s11740-019-00895-2",
"https://app.dimensions.ai/details/publication/pub.1113048346"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-15T08:48",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000374_0000000374/records_119717_00000001.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.1007%2Fs11740-019-00895-2"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00895-2'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00895-2'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00895-2'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00895-2'
This table displays all metadata directly associated to this object as RDF triples.
170 TRIPLES
21 PREDICATES
50 URIs
18 LITERALS
7 BLANK NODES