Ontology type: schema:ScholarlyArticle
2019-03-20
AUTHORSAlessandro Colpani, Antonio Fiorentino, Elisabetta Ceretti
ABSTRACTAdditive manufacturing (AM) is a layer-by-layer fabrication process for producing complex parts with a high design flexibility. In particular, the interest in AM is growing in many fields, especially for fabricating highly customized parts. One of the most widespread AM techniques is fused deposition modelling (FDM), but an important limit for this technology is the low surface finishing. Therefore, the enhancement of the surface roughness of parts produced by FDM represents one of the main research challenges in this field. Several approaches have been proposed and the use of solvent for chemical finishing treatments has a great potentiality. The present research investigates the surface post-treatment process with cold vapours of dimethyl ketone (acetone) for 3D printed parts made in ABS and produced by FDM. In particular, the study focuses on the capability of the treatment in enhancing the surface finishing in terms of surface roughness, uniformity and treatment time. A full range of initial surface roughness were treated considering two different process setups and analysing the roughness evolution over the treatment time. Results showed a 98% reduction of the roughness within the post-treatment. Moreover, the most stable configuration was identified. Finally, the research outlined a map of the process which correlates the achievable surface finishing with the initial roughness of the part and with the treatment time. More... »
PAGES1-11
http://scigraph.springernature.com/pub.10.1007/s11740-019-00894-3
DOIhttp://dx.doi.org/10.1007/s11740-019-00894-3
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1112897414
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "University of Brescia",
"id": "https://www.grid.ac/institutes/grid.7637.5",
"name": [
"Department of Mechanical and Industrial Engineering, University of Brescia, via Branze 38, 25123, Brescia, Italy"
],
"type": "Organization"
},
"familyName": "Colpani",
"givenName": "Alessandro",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Brescia",
"id": "https://www.grid.ac/institutes/grid.7637.5",
"name": [
"Department of Mechanical and Industrial Engineering, University of Brescia, via Branze 38, 25123, Brescia, Italy"
],
"type": "Organization"
},
"familyName": "Fiorentino",
"givenName": "Antonio",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Brescia",
"id": "https://www.grid.ac/institutes/grid.7637.5",
"name": [
"Department of Mechanical and Industrial Engineering, University of Brescia, via Branze 38, 25123, Brescia, Italy"
],
"type": "Organization"
},
"familyName": "Ceretti",
"givenName": "Elisabetta",
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.1016/j.cirpj.2011.08.003",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1001198905"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2005.02.259",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1001878160"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.rcim.2016.03.004",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1004585024"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0924-0136(01)00980-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1004712144"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.cirp.2010.03.074",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1012676803"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-008-1675-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1013134123",
"https://doi.org/10.1007/s00170-008-1675-2"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-008-1675-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1013134123",
"https://doi.org/10.1007/s00170-008-1675-2"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-015-6879-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1019086250",
"https://doi.org/10.1007/s00170-015-6879-7"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1108/13552549810207279",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1019577369"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1201/b15961-109",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020727707"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2009.05.016",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1024824323"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matdes.2009.04.030",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1028072965"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1080/10426914.2015.1090594",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1029245608"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11837-016-2214-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1029399865",
"https://doi.org/10.1007/s11837-016-2214-5"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11837-016-2214-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1029399865",
"https://doi.org/10.1007/s11837-016-2214-5"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1080/17452759.2014.913400",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1033856980"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-013-5196-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036330001",
"https://doi.org/10.1007/s00170-013-5196-2"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1108/rpj-12-2011-0127",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1041091092"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.compositesb.2016.11.062",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1042817584"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1080/10426914.2015.1070425",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1044313590"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1080/10426910008912976",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1048620108"
],
"type": "CreativeWork"
},
{
"id": "https://app.dimensions.ai/details/publication/pub.1050116179",
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/978-1-4419-1120-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050116179",
"https://doi.org/10.1007/978-1-4419-1120-9"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/978-1-4419-1120-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050116179",
"https://doi.org/10.1007/978-1-4419-1120-9"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1108/13552540810862028",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050975943"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-016-9257-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052541342",
"https://doi.org/10.1007/s00170-016-9257-1"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00170-016-9257-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052541342",
"https://doi.org/10.1007/s00170-016-9257-1"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1115/1.4028585",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1062153896"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1177/0954411916643343",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1063889034"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1177/0954411916643343",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1063889034"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ifacol.2016.12.159",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1083867436"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.procir.2017.04.042",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1090858990"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1201/b11341",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1095904927"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1142/6665",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1097034407"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/adv.21944",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1100620448"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1063/1.5034998",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1103890727"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.3311/ppme.12128",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1105511912"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1038/s41586-018-0474-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1106707839",
"https://doi.org/10.1038/s41586-018-0474-7"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.precisioneng.2018.08.019",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1106821772"
],
"type": "CreativeWork"
}
],
"datePublished": "2019-03-20",
"datePublishedReg": "2019-03-20",
"description": "Additive manufacturing (AM) is a layer-by-layer fabrication process for producing complex parts with a high design flexibility. In particular, the interest in AM is growing in many fields, especially for fabricating highly customized parts. One of the most widespread AM techniques is fused deposition modelling (FDM), but an important limit for this technology is the low surface finishing. Therefore, the enhancement of the surface roughness of parts produced by FDM represents one of the main research challenges in this field. Several approaches have been proposed and the use of solvent for chemical finishing treatments has a great potentiality. The present research investigates the surface post-treatment process with cold vapours of dimethyl ketone (acetone) for 3D printed parts made in ABS and produced by FDM. In particular, the study focuses on the capability of the treatment in enhancing the surface finishing in terms of surface roughness, uniformity and treatment time. A full range of initial surface roughness were treated considering two different process setups and analysing the roughness evolution over the treatment time. Results showed a 98% reduction of the roughness within the post-treatment. Moreover, the most stable configuration was identified. Finally, the research outlined a map of the process which correlates the achievable surface finishing with the initial roughness of the part and with the treatment time.",
"genre": "research_article",
"id": "sg:pub.10.1007/s11740-019-00894-3",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1136430",
"issn": [
"0944-6524",
"1863-7353"
],
"name": "Production Engineering",
"type": "Periodical"
}
],
"name": "Characterization of chemical surface finishing with cold acetone vapours on ABS parts fabricated by FDM",
"pagination": "1-11",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"4833ab7fea4971a5c39419439d88166437b1ce4216dd7cbcdc0ae6800c7f82e1"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s11740-019-00894-3"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1112897414"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s11740-019-00894-3",
"https://app.dimensions.ai/details/publication/pub.1112897414"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-11T12:38",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000363_0000000363/records_70040_00000003.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.1007%2Fs11740-019-00894-3"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00894-3'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00894-3'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00894-3'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11740-019-00894-3'
This table displays all metadata directly associated to this object as RDF triples.
174 TRIPLES
21 PREDICATES
58 URIs
16 LITERALS
5 BLANK NODES