Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2018-04

AUTHORS

Markus Muth, Jan Schwennen, Alexander Bernath, Julian Seuffert, Kay André Weidenmann, Jürgen Fleischer, Frank Henning

ABSTRACT

Due to their outstanding specific mechanical properties, carbon fibre reinforced plastics (CFRP) exhibit a high application potential for lightweight structures. With respect to multi-material design and to avoid drilling of structural CFRP parts to join them to other components, embedded metal elements, so called inserts, can be used. The inserts consist of a shaft and a baseplate which is embedded between the fibre layers. So far, only punctiform inserts have been subject to research. One feasible geometry are linear inserts which have not been studied yet. In this work, the performance of two different types of linear inserts will be investigated. The shapes are based on a punctiform insert which is made out of a threaded shaft welded onto a baseplate whose performance under different types of loading has been investigated before. The first type of linear inserts has the same cross-section as the reference punctiform insert but is of a linear form. The second type is a quasi-linear insert which consists of a baseplate with the same dimensions as the first linear inserts and three threaded shafts welded onto it. All samples are manufactured by resin transfer moulding (RTM). Depending on the geometry of the insert and the preforming concept it is potentially possible to maintain the fibre continuity. For the inserts with a continuous shaft and in the proximity of the insert, it is necessary to cut fibres of the top layers which are aligned perpendicular to the shaft. For the quasi-linear insert, it is possible to maintain the fibre continuity as the fibres are guided around the circular shafts. Additional to mechanical tests that are carried out, mould-filling and curing simulations are performed for different inserts to analyse the influence of the process parameters onto the part quality. In the main series of tests, the specimens are characterized regarding their failure behaviour and load bearing capacity under quasi-static loads. The results of the experiments show that, compared to the punctiform reference insert, the linear load introduction elements exhibit higher load bearing capacity. However, the linear load introduction elements are inferior regarding specific load bearing capacity and furthermore increase process complexity during preforming and production. More... »

PAGES

141-152

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s11740-018-0829-9

DOI

http://dx.doi.org/10.1007/s11740-018-0829-9

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1103471574


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0905", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Civil Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Karlsruhe Institute of Technology", 
          "id": "https://www.grid.ac/institutes/grid.7892.4", 
          "name": [
            "Karlsruhe Institute of Technology (KIT), Institute for Applied Materials IAM\u2013WK, Kaiserstr. 12, 76131, Karlsruhe, Germany"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Muth", 
        "givenName": "Markus", 
        "id": "sg:person.014634430331.75", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014634430331.75"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Karlsruhe Institute of Technology", 
          "id": "https://www.grid.ac/institutes/grid.7892.4", 
          "name": [
            "Karlsruhe Institute of Technology (KIT), wbk Institute of Production Science, Kaiserstr. 12, 76131, Karlsruhe, Germany"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Schwennen", 
        "givenName": "Jan", 
        "id": "sg:person.014706273020.58", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014706273020.58"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Karlsruhe Institute of Technology", 
          "id": "https://www.grid.ac/institutes/grid.7892.4", 
          "name": [
            "Karlsruhe Institute of Technology (KIT), Institute of Vehicle System Technology, Chair for Lightweight Technology, Rintheimer Querallee 2, 76131, Karlsruhe, Germany"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Bernath", 
        "givenName": "Alexander", 
        "id": "sg:person.012213144377.30", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012213144377.30"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Karlsruhe Institute of Technology", 
          "id": "https://www.grid.ac/institutes/grid.7892.4", 
          "name": [
            "Karlsruhe Institute of Technology (KIT), Institute of Vehicle System Technology, Chair for Lightweight Technology, Rintheimer Querallee 2, 76131, Karlsruhe, Germany"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Seuffert", 
        "givenName": "Julian", 
        "id": "sg:person.011351764261.13", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011351764261.13"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Karlsruhe Institute of Technology", 
          "id": "https://www.grid.ac/institutes/grid.7892.4", 
          "name": [
            "Karlsruhe Institute of Technology (KIT), Institute for Applied Materials IAM\u2013WK, Kaiserstr. 12, 76131, Karlsruhe, Germany"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Weidenmann", 
        "givenName": "Kay Andr\u00e9", 
        "id": "sg:person.01261727765.75", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01261727765.75"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Karlsruhe Institute of Technology", 
          "id": "https://www.grid.ac/institutes/grid.7892.4", 
          "name": [
            "Karlsruhe Institute of Technology (KIT), wbk Institute of Production Science, Kaiserstr. 12, 76131, Karlsruhe, Germany"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Fleischer", 
        "givenName": "J\u00fcrgen", 
        "id": "sg:person.01326762701.95", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01326762701.95"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Fraunhofer Institute for Chemical Technology", 
          "id": "https://www.grid.ac/institutes/grid.461616.2", 
          "name": [
            "Karlsruhe Institute of Technology (KIT), Institute of Vehicle System Technology, Chair for Lightweight Technology, Rintheimer Querallee 2, 76131, Karlsruhe, Germany", 
            "Fraunhofer Institute for Chemical Technology (ICT), Joseph-von-Fraunhofer Str. 7, 76327, Pfinztal, Germany"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Henning", 
        "givenName": "Frank", 
        "id": "sg:person.011065110471.97", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011065110471.97"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/s0266-3538(99)00160-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1001746822"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/aic.690280213", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007228631"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.compscitech.2005.02.011", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007784620"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0266-3538(98)00026-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1008965084"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/pc.750140111", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1020328342"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/pc.750140111", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1020328342"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1359-835x(97)00107-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021744753"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.procir.2014.10.084", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023158618"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0266-3538(03)00161-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026125138"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0266-3538(03)00161-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026125138"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.compscitech.2006.02.017", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026319293"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839002401201", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032526397"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/002199839002401201", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032526397"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.applthermaleng.2004.03.005", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038569846"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.3390/polym8110390", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1043923392"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.3390/polym8110390", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1043923392"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/pc.750150205", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1045025482"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/pc.750150205", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1045025482"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/pen.10447", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1049353435"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.compstruct.2007.05.010", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1049956084"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/0021998311422456", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063622584"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/0021998311422456", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063622584"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.4028/www.scientific.net/msf.825-826.506", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1072146416"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.4028/www.scientific.net/msf.825-826.822", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1072146459"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.4028/www.scientific.net/kem.742.681", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1090521117"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11340-017-0312-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1090804429", 
          "https://doi.org/10.1007/s11340-017-0312-0"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11340-017-0312-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1090804429", 
          "https://doi.org/10.1007/s11340-017-0312-0"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2018-04", 
    "datePublishedReg": "2018-04-01", 
    "description": "Due to their outstanding specific mechanical properties, carbon fibre reinforced plastics (CFRP) exhibit a high application potential for lightweight structures. With respect to multi-material design and to avoid drilling of structural CFRP parts to join them to other components, embedded metal elements, so called inserts, can be used. The inserts consist of a shaft and a baseplate which is embedded between the fibre layers. So far, only punctiform inserts have been subject to research. One feasible geometry are linear inserts which have not been studied yet. In this work, the performance of two different types of linear inserts will be investigated. The shapes are based on a punctiform insert which is made out of a threaded shaft welded onto a baseplate whose performance under different types of loading has been investigated before. The first type of linear inserts has the same cross-section as the reference punctiform insert but is of a linear form. The second type is a quasi-linear insert which consists of a baseplate with the same dimensions as the first linear inserts and three threaded shafts welded onto it. All samples are manufactured by resin transfer moulding (RTM). Depending on the geometry of the insert and the preforming concept it is potentially possible to maintain the fibre continuity. For the inserts with a continuous shaft and in the proximity of the insert, it is necessary to cut fibres of the top layers which are aligned perpendicular to the shaft. For the quasi-linear insert, it is possible to maintain the fibre continuity as the fibres are guided around the circular shafts. Additional to mechanical tests that are carried out, mould-filling and curing simulations are performed for different inserts to analyse the influence of the process parameters onto the part quality. In the main series of tests, the specimens are characterized regarding their failure behaviour and load bearing capacity under quasi-static loads. The results of the experiments show that, compared to the punctiform reference insert, the linear load introduction elements exhibit higher load bearing capacity. However, the linear load introduction elements are inferior regarding specific load bearing capacity and furthermore increase process complexity during preforming and production.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s11740-018-0829-9", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1136430", 
        "issn": [
          "0944-6524", 
          "1863-7353"
        ], 
        "name": "Production Engineering", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "2", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "12"
      }
    ], 
    "name": "Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP", 
    "pagination": "141-152", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "ba0a6d56d7c67709aeb57dd56f219f3286eb2e0900bf1d3c1c94bde74e2f6a87"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s11740-018-0829-9"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1103471574"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s11740-018-0829-9", 
      "https://app.dimensions.ai/details/publication/pub.1103471574"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T10:32", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000349_0000000349/records_113655_00000004.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://link.springer.com/10.1007%2Fs11740-018-0829-9"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11740-018-0829-9'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11740-018-0829-9'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11740-018-0829-9'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11740-018-0829-9'


 

This table displays all metadata directly associated to this object as RDF triples.

170 TRIPLES      21 PREDICATES      47 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s11740-018-0829-9 schema:about anzsrc-for:09
2 anzsrc-for:0905
3 schema:author N400efc19025d4fc5be9b728d1ffb4cd9
4 schema:citation sg:pub.10.1007/s11340-017-0312-0
5 https://doi.org/10.1002/aic.690280213
6 https://doi.org/10.1002/pc.750140111
7 https://doi.org/10.1002/pc.750150205
8 https://doi.org/10.1002/pen.10447
9 https://doi.org/10.1016/j.applthermaleng.2004.03.005
10 https://doi.org/10.1016/j.compscitech.2005.02.011
11 https://doi.org/10.1016/j.compscitech.2006.02.017
12 https://doi.org/10.1016/j.compstruct.2007.05.010
13 https://doi.org/10.1016/j.procir.2014.10.084
14 https://doi.org/10.1016/s0266-3538(03)00161-1
15 https://doi.org/10.1016/s0266-3538(98)00026-8
16 https://doi.org/10.1016/s0266-3538(99)00160-8
17 https://doi.org/10.1016/s1359-835x(97)00107-3
18 https://doi.org/10.1177/0021998311422456
19 https://doi.org/10.1177/002199839002401201
20 https://doi.org/10.3390/polym8110390
21 https://doi.org/10.4028/www.scientific.net/kem.742.681
22 https://doi.org/10.4028/www.scientific.net/msf.825-826.506
23 https://doi.org/10.4028/www.scientific.net/msf.825-826.822
24 schema:datePublished 2018-04
25 schema:datePublishedReg 2018-04-01
26 schema:description Due to their outstanding specific mechanical properties, carbon fibre reinforced plastics (CFRP) exhibit a high application potential for lightweight structures. With respect to multi-material design and to avoid drilling of structural CFRP parts to join them to other components, embedded metal elements, so called inserts, can be used. The inserts consist of a shaft and a baseplate which is embedded between the fibre layers. So far, only punctiform inserts have been subject to research. One feasible geometry are linear inserts which have not been studied yet. In this work, the performance of two different types of linear inserts will be investigated. The shapes are based on a punctiform insert which is made out of a threaded shaft welded onto a baseplate whose performance under different types of loading has been investigated before. The first type of linear inserts has the same cross-section as the reference punctiform insert but is of a linear form. The second type is a quasi-linear insert which consists of a baseplate with the same dimensions as the first linear inserts and three threaded shafts welded onto it. All samples are manufactured by resin transfer moulding (RTM). Depending on the geometry of the insert and the preforming concept it is potentially possible to maintain the fibre continuity. For the inserts with a continuous shaft and in the proximity of the insert, it is necessary to cut fibres of the top layers which are aligned perpendicular to the shaft. For the quasi-linear insert, it is possible to maintain the fibre continuity as the fibres are guided around the circular shafts. Additional to mechanical tests that are carried out, mould-filling and curing simulations are performed for different inserts to analyse the influence of the process parameters onto the part quality. In the main series of tests, the specimens are characterized regarding their failure behaviour and load bearing capacity under quasi-static loads. The results of the experiments show that, compared to the punctiform reference insert, the linear load introduction elements exhibit higher load bearing capacity. However, the linear load introduction elements are inferior regarding specific load bearing capacity and furthermore increase process complexity during preforming and production.
27 schema:genre research_article
28 schema:inLanguage en
29 schema:isAccessibleForFree false
30 schema:isPartOf N9750c1f9aa104a31920a4a46ac01736e
31 Nb91b6e1e09ae425c8debbfecd168e98f
32 sg:journal.1136430
33 schema:name Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP
34 schema:pagination 141-152
35 schema:productId N0a285a04082244ae8ffb1858d1955551
36 N266aff8648d5482f8068423ce7ed7729
37 Ne7b0498a18c9477b980acb2b3b389675
38 schema:sameAs https://app.dimensions.ai/details/publication/pub.1103471574
39 https://doi.org/10.1007/s11740-018-0829-9
40 schema:sdDatePublished 2019-04-11T10:32
41 schema:sdLicense https://scigraph.springernature.com/explorer/license/
42 schema:sdPublisher Nc0e83cd4820e42ebb85b2bbd5fc8102c
43 schema:url https://link.springer.com/10.1007%2Fs11740-018-0829-9
44 sgo:license sg:explorer/license/
45 sgo:sdDataset articles
46 rdf:type schema:ScholarlyArticle
47 N0a285a04082244ae8ffb1858d1955551 schema:name readcube_id
48 schema:value ba0a6d56d7c67709aeb57dd56f219f3286eb2e0900bf1d3c1c94bde74e2f6a87
49 rdf:type schema:PropertyValue
50 N266aff8648d5482f8068423ce7ed7729 schema:name dimensions_id
51 schema:value pub.1103471574
52 rdf:type schema:PropertyValue
53 N400efc19025d4fc5be9b728d1ffb4cd9 rdf:first sg:person.014634430331.75
54 rdf:rest N8e5f6f04af8148be9cb05394fab2ec1a
55 N5126c9c9d2da44afa73d6c60d042b7ff rdf:first sg:person.012213144377.30
56 rdf:rest N938134dd525a47fe946a27a84d040088
57 N8e5f6f04af8148be9cb05394fab2ec1a rdf:first sg:person.014706273020.58
58 rdf:rest N5126c9c9d2da44afa73d6c60d042b7ff
59 N8f7087a0663a44c8a54c5ad979825d8b rdf:first sg:person.011065110471.97
60 rdf:rest rdf:nil
61 N91093a796f874e5983f575211153c522 rdf:first sg:person.01326762701.95
62 rdf:rest N8f7087a0663a44c8a54c5ad979825d8b
63 N938134dd525a47fe946a27a84d040088 rdf:first sg:person.011351764261.13
64 rdf:rest Nd457f3cc29de41dcbb52d27e490ab41d
65 N9750c1f9aa104a31920a4a46ac01736e schema:issueNumber 2
66 rdf:type schema:PublicationIssue
67 Nb91b6e1e09ae425c8debbfecd168e98f schema:volumeNumber 12
68 rdf:type schema:PublicationVolume
69 Nc0e83cd4820e42ebb85b2bbd5fc8102c schema:name Springer Nature - SN SciGraph project
70 rdf:type schema:Organization
71 Nd457f3cc29de41dcbb52d27e490ab41d rdf:first sg:person.01261727765.75
72 rdf:rest N91093a796f874e5983f575211153c522
73 Ne7b0498a18c9477b980acb2b3b389675 schema:name doi
74 schema:value 10.1007/s11740-018-0829-9
75 rdf:type schema:PropertyValue
76 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
77 schema:name Engineering
78 rdf:type schema:DefinedTerm
79 anzsrc-for:0905 schema:inDefinedTermSet anzsrc-for:
80 schema:name Civil Engineering
81 rdf:type schema:DefinedTerm
82 sg:journal.1136430 schema:issn 0944-6524
83 1863-7353
84 schema:name Production Engineering
85 rdf:type schema:Periodical
86 sg:person.011065110471.97 schema:affiliation https://www.grid.ac/institutes/grid.461616.2
87 schema:familyName Henning
88 schema:givenName Frank
89 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011065110471.97
90 rdf:type schema:Person
91 sg:person.011351764261.13 schema:affiliation https://www.grid.ac/institutes/grid.7892.4
92 schema:familyName Seuffert
93 schema:givenName Julian
94 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011351764261.13
95 rdf:type schema:Person
96 sg:person.012213144377.30 schema:affiliation https://www.grid.ac/institutes/grid.7892.4
97 schema:familyName Bernath
98 schema:givenName Alexander
99 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012213144377.30
100 rdf:type schema:Person
101 sg:person.01261727765.75 schema:affiliation https://www.grid.ac/institutes/grid.7892.4
102 schema:familyName Weidenmann
103 schema:givenName Kay André
104 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01261727765.75
105 rdf:type schema:Person
106 sg:person.01326762701.95 schema:affiliation https://www.grid.ac/institutes/grid.7892.4
107 schema:familyName Fleischer
108 schema:givenName Jürgen
109 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01326762701.95
110 rdf:type schema:Person
111 sg:person.014634430331.75 schema:affiliation https://www.grid.ac/institutes/grid.7892.4
112 schema:familyName Muth
113 schema:givenName Markus
114 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014634430331.75
115 rdf:type schema:Person
116 sg:person.014706273020.58 schema:affiliation https://www.grid.ac/institutes/grid.7892.4
117 schema:familyName Schwennen
118 schema:givenName Jan
119 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014706273020.58
120 rdf:type schema:Person
121 sg:pub.10.1007/s11340-017-0312-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1090804429
122 https://doi.org/10.1007/s11340-017-0312-0
123 rdf:type schema:CreativeWork
124 https://doi.org/10.1002/aic.690280213 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007228631
125 rdf:type schema:CreativeWork
126 https://doi.org/10.1002/pc.750140111 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020328342
127 rdf:type schema:CreativeWork
128 https://doi.org/10.1002/pc.750150205 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045025482
129 rdf:type schema:CreativeWork
130 https://doi.org/10.1002/pen.10447 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049353435
131 rdf:type schema:CreativeWork
132 https://doi.org/10.1016/j.applthermaleng.2004.03.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038569846
133 rdf:type schema:CreativeWork
134 https://doi.org/10.1016/j.compscitech.2005.02.011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007784620
135 rdf:type schema:CreativeWork
136 https://doi.org/10.1016/j.compscitech.2006.02.017 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026319293
137 rdf:type schema:CreativeWork
138 https://doi.org/10.1016/j.compstruct.2007.05.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049956084
139 rdf:type schema:CreativeWork
140 https://doi.org/10.1016/j.procir.2014.10.084 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023158618
141 rdf:type schema:CreativeWork
142 https://doi.org/10.1016/s0266-3538(03)00161-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026125138
143 rdf:type schema:CreativeWork
144 https://doi.org/10.1016/s0266-3538(98)00026-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008965084
145 rdf:type schema:CreativeWork
146 https://doi.org/10.1016/s0266-3538(99)00160-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001746822
147 rdf:type schema:CreativeWork
148 https://doi.org/10.1016/s1359-835x(97)00107-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021744753
149 rdf:type schema:CreativeWork
150 https://doi.org/10.1177/0021998311422456 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063622584
151 rdf:type schema:CreativeWork
152 https://doi.org/10.1177/002199839002401201 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032526397
153 rdf:type schema:CreativeWork
154 https://doi.org/10.3390/polym8110390 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043923392
155 rdf:type schema:CreativeWork
156 https://doi.org/10.4028/www.scientific.net/kem.742.681 schema:sameAs https://app.dimensions.ai/details/publication/pub.1090521117
157 rdf:type schema:CreativeWork
158 https://doi.org/10.4028/www.scientific.net/msf.825-826.506 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072146416
159 rdf:type schema:CreativeWork
160 https://doi.org/10.4028/www.scientific.net/msf.825-826.822 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072146459
161 rdf:type schema:CreativeWork
162 https://www.grid.ac/institutes/grid.461616.2 schema:alternateName Fraunhofer Institute for Chemical Technology
163 schema:name Fraunhofer Institute for Chemical Technology (ICT), Joseph-von-Fraunhofer Str. 7, 76327, Pfinztal, Germany
164 Karlsruhe Institute of Technology (KIT), Institute of Vehicle System Technology, Chair for Lightweight Technology, Rintheimer Querallee 2, 76131, Karlsruhe, Germany
165 rdf:type schema:Organization
166 https://www.grid.ac/institutes/grid.7892.4 schema:alternateName Karlsruhe Institute of Technology
167 schema:name Karlsruhe Institute of Technology (KIT), Institute for Applied Materials IAM–WK, Kaiserstr. 12, 76131, Karlsruhe, Germany
168 Karlsruhe Institute of Technology (KIT), Institute of Vehicle System Technology, Chair for Lightweight Technology, Rintheimer Querallee 2, 76131, Karlsruhe, Germany
169 Karlsruhe Institute of Technology (KIT), wbk Institute of Production Science, Kaiserstr. 12, 76131, Karlsruhe, Germany
170 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...