Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing View Full Text


Ontology type: schema:ScholarlyArticle      Open Access: True


Article Info

DATE

2017-04

AUTHORS

D. MacDonald, R. Fernández, F. Delloro, B. Jodoin

ABSTRACT

Titanium parts are ideally suited for aerospace applications due to their unique combination of high specific strength and excellent corrosion resistance. However, titanium as bulk material is expensive and challenging/costly to machine. Production of complex titanium parts through additive manufacturing looks promising, but there are still many barriers to overcome before reaching mainstream commercialization. The cold gas dynamic spraying process offers the potential for additive manufacturing of large titanium parts due to its reduced reactive environment, its simplicity to operate, and the high deposition rates it offers. A few challenges are to be addressed before the additive manufacturing potential of titanium by cold gas dynamic spraying can be reached. In particular, it is known that titanium is easy to deposit by cold gas dynamic spraying, but the deposits produced are usually porous when nitrogen is used as the carrier gas. In this work, a method to manufacture low-porosity titanium components at high deposition efficiencies is revealed. The components are produced by combining low-pressure cold spray using nitrogen as the carrier gas with low-cost titanium powder produced using the Armstrong process. The microstructure and mechanical properties of additive manufactured titanium components are investigated. More... »

PAGES

598-609

References to SciGraph publications

  • 2009-09. Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2011-01. Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2006-06. The effect of a simple annealing heat treatment on the mechanical properties of cold-sprayed aluminum in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2014-02. The Use of Particle/Substrate Material Models in Simulation of Cold-Gas Dynamic-Spray Process in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2013-09. Additive manufacturing: technology, applications and research needs in FRONTIERS OF MECHANICAL ENGINEERING
  • 2015. Additive Manufacturing Technologies, 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing in NONE
  • 2008-04. The Repair of Magnesium Rotorcraft Components by Cold Spray in JOURNAL OF FAILURE ANALYSIS AND PREVENTION
  • 2014-06. Metal Additive Manufacturing: A Review in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 1972-09. Recrystallization and grain growth in titanium: I. characterization of the structure in METALLURGICAL TRANSACTIONS A
  • 2012-03. The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2013-10. Net Shape Fins for Compact Heat Exchanger Produced by Cold Spray in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2013-10. Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2010-03. An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2015-02. Mechanical Properties of Cold Gas Dynamic-Sprayed Near-Net-Shaped Fin Arrays in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2006-06. Effect of annealing treatment on the microstructure and properties of cold-sprayed Cu coating in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2011-11. Microtubule nucleation by γ-tubulin complexes in NATURE REVIEWS MOLECULAR CELL BIOLOGY
  • 2006-12. New developments in cold spray based on higher gas and particle temperatures in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2005-09. Effects of spray conditions on coating formation by the kinetic spray process in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 1998-06. Gas dynamic principles of cold spray in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2015. Modern Cold Spray, Materials, Process, and Applications in NONE
  • 2014-08. Deposition Features of Ti Coating Using Irregular Powders in Cold Spray in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2015-12. Finite Element Analysis and Failure Mode Characterization of Pyramidal Fin Arrays Produced by Masked Cold Gas Dynamic Spray in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2013-12. Potential of cold gas dynamic spray as additive manufacturing technology in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2014-12. Aircraft Skin Restoration and Evaluation in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • Journal

    TITLE

    Journal of Thermal Spray Technology

    ISSUE

    4

    VOLUME

    26

    Author Affiliations

    Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11666-016-0489-2

    DOI

    http://dx.doi.org/10.1007/s11666-016-0489-2

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1044507385


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "University of Ottawa", 
              "id": "https://www.grid.ac/institutes/grid.28046.38", 
              "name": [
                "University of Ottawa Cold Spray Laboratory, Ottawa, ON, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "MacDonald", 
            "givenName": "D.", 
            "id": "sg:person.010773140557.08", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010773140557.08"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Ottawa", 
              "id": "https://www.grid.ac/institutes/grid.28046.38", 
              "name": [
                "University of Ottawa Cold Spray Laboratory, Ottawa, ON, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Fern\u00e1ndez", 
            "givenName": "R.", 
            "id": "sg:person.014760656671.84", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014760656671.84"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Ottawa", 
              "id": "https://www.grid.ac/institutes/grid.28046.38", 
              "name": [
                "University of Ottawa Cold Spray Laboratory, Ottawa, ON, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Delloro", 
            "givenName": "F.", 
            "id": "sg:person.015011165522.92", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015011165522.92"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Ottawa", 
              "id": "https://www.grid.ac/institutes/grid.28046.38", 
              "name": [
                "University of Ottawa Cold Spray Laboratory, Ottawa, ON, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Jodoin", 
            "givenName": "B.", 
            "id": "sg:person.01260234472.39", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01260234472.39"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/s11666-009-9454-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000834124", 
              "https://doi.org/10.1007/s11666-009-9454-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-009-9454-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000834124", 
              "https://doi.org/10.1007/s11666-009-9454-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-015-0317-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001920986", 
              "https://doi.org/10.1007/s11666-015-0317-0"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2011.05.038", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001978339"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0026-0657(14)70274-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002692104"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/b978-0-12-800054-0.00011-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004584468"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996305x59369", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005132443", 
              "https://doi.org/10.1361/105996305x59369"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996306x147144", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006341373", 
              "https://doi.org/10.1361/105996306x147144"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.procir.2015.08.061", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006627830"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actamat.2005.10.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007253959"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0257-8972(02)00919-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007737993"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0257-8972(02)00919-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007737993"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.scriptamat.2005.10.028", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009703852"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-013-9968-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010283865", 
              "https://doi.org/10.1007/s11666-013-9968-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-014-0130-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010545885", 
              "https://doi.org/10.1007/s11666-014-0130-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2006.05.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010848541"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-014-0203-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1011620763", 
              "https://doi.org/10.1007/s11666-014-0203-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-011-9720-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013599518", 
              "https://doi.org/10.1007/s11666-011-9720-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-3-319-16772-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013962264", 
              "https://doi.org/10.1007/978-3-319-16772-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-3-319-16772-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013962264", 
              "https://doi.org/10.1007/978-3-319-16772-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2320/matertrans.47.1697", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014468460"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/nrm3209", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015983865", 
              "https://doi.org/10.1038/nrm3209"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actamat.2008.06.003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018320619"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.addma.2015.03.006", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018579568"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://app.dimensions.ai/details/publication/pub.1020610268", 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-1-4939-2113-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020610268", 
              "https://doi.org/10.1007/978-1-4939-2113-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-1-4939-2113-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020610268", 
              "https://doi.org/10.1007/978-1-4939-2113-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00274-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020725941"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00274-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020725941"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/amr.89-91.639", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021337900"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.apsusc.2006.05.126", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1022055979"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996306x108138", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023425098", 
              "https://doi.org/10.1361/105996306x108138"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-014-0116-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024598447", 
              "https://doi.org/10.1007/s11666-014-0116-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-010-9568-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027262816", 
              "https://doi.org/10.1007/s11666-010-9568-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-010-9568-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027262816", 
              "https://doi.org/10.1007/s11666-010-9568-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/b978-0-12-800054-0.00009-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027587397"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11668-008-9116-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030281961", 
              "https://doi.org/10.1007/s11668-008-9116-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-014-0958-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1032374549", 
              "https://doi.org/10.1007/s11665-014-0958-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02647044", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033754466", 
              "https://doi.org/10.1007/bf02647044"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02647044", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033754466", 
              "https://doi.org/10.1007/bf02647044"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmatprotec.2008.03.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036384579"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-009-9298-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036942547", 
              "https://doi.org/10.1007/s11666-009-9298-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996306x108066", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037513785", 
              "https://doi.org/10.1361/105996306x108066"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.apsusc.2009.04.135", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041342123"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jallcom.2015.01.256", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042227789"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996398770350945", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043400429", 
              "https://doi.org/10.1361/105996398770350945"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-013-5166-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043675699", 
              "https://doi.org/10.1007/s00170-013-5166-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11465-013-0248-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044425730", 
              "https://doi.org/10.1007/s11465-013-0248-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-013-0051-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044872551", 
              "https://doi.org/10.1007/s11666-013-0051-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.072", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045501655"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2004.03.008", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048002911"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-013-9951-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049289842", 
              "https://doi.org/10.1007/s11666-013-9951-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/kem.533.53", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1072087333"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/msf.618-619.505", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1072130510"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/msf.654-656.898", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1072133725"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/isfa2012-7256", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1092828130"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2017-04", 
        "datePublishedReg": "2017-04-01", 
        "description": "Titanium parts are ideally suited for aerospace applications due to their unique combination of high specific strength and excellent corrosion resistance. However, titanium as bulk material is expensive and challenging/costly to machine. Production of complex titanium parts through additive manufacturing looks promising, but there are still many barriers to overcome before reaching mainstream commercialization. The cold gas dynamic spraying process offers the potential for additive manufacturing of large titanium parts due to its reduced reactive environment, its simplicity to operate, and the high deposition rates it offers. A few challenges are to be addressed before the additive manufacturing potential of titanium by cold gas dynamic spraying can be reached. In particular, it is known that titanium is easy to deposit by cold gas dynamic spraying, but the deposits produced are usually porous when nitrogen is used as the carrier gas. In this work, a method to manufacture low-porosity titanium components at high deposition efficiencies is revealed. The components are produced by combining low-pressure cold spray using nitrogen as the carrier gas with low-cost titanium powder produced using the Armstrong process. The microstructure and mechanical properties of additive manufactured titanium components are investigated.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s11666-016-0489-2", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": true, 
        "isPartOf": [
          {
            "id": "sg:journal.1136229", 
            "issn": [
              "1059-9630", 
              "1544-1016"
            ], 
            "name": "Journal of Thermal Spray Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "4", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "26"
          }
        ], 
        "name": "Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing", 
        "pagination": "598-609", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "d4014eb02684167ad526bfa4a34a4e5953611a22e2d1fdcde6771d2e969d407f"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11666-016-0489-2"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1044507385"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11666-016-0489-2", 
          "https://app.dimensions.ai/details/publication/pub.1044507385"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T10:20", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000348_0000000348/records_54328_00000000.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://link.springer.com/10.1007%2Fs11666-016-0489-2"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11666-016-0489-2'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11666-016-0489-2'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11666-016-0489-2'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11666-016-0489-2'


     

    This table displays all metadata directly associated to this object as RDF triples.

    252 TRIPLES      21 PREDICATES      76 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11666-016-0489-2 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N0ce71a232e7c440f830db2e05e39baa3
    4 schema:citation sg:pub.10.1007/978-1-4939-2113-3
    5 sg:pub.10.1007/978-3-319-16772-5
    6 sg:pub.10.1007/bf02647044
    7 sg:pub.10.1007/s00170-013-5166-8
    8 sg:pub.10.1007/s11465-013-0248-8
    9 sg:pub.10.1007/s11665-014-0958-z
    10 sg:pub.10.1007/s11666-009-9298-1
    11 sg:pub.10.1007/s11666-009-9454-7
    12 sg:pub.10.1007/s11666-010-9568-y
    13 sg:pub.10.1007/s11666-011-9720-3
    14 sg:pub.10.1007/s11666-013-0051-4
    15 sg:pub.10.1007/s11666-013-9951-6
    16 sg:pub.10.1007/s11666-013-9968-x
    17 sg:pub.10.1007/s11666-014-0116-z
    18 sg:pub.10.1007/s11666-014-0130-1
    19 sg:pub.10.1007/s11666-014-0203-1
    20 sg:pub.10.1007/s11666-015-0317-0
    21 sg:pub.10.1007/s11668-008-9116-y
    22 sg:pub.10.1038/nrm3209
    23 sg:pub.10.1361/105996305x59369
    24 sg:pub.10.1361/105996306x108066
    25 sg:pub.10.1361/105996306x108138
    26 sg:pub.10.1361/105996306x147144
    27 sg:pub.10.1361/105996398770350945
    28 https://app.dimensions.ai/details/publication/pub.1020610268
    29 https://doi.org/10.1016/b978-0-12-800054-0.00009-5
    30 https://doi.org/10.1016/b978-0-12-800054-0.00011-3
    31 https://doi.org/10.1016/j.actamat.2005.10.005
    32 https://doi.org/10.1016/j.actamat.2008.06.003
    33 https://doi.org/10.1016/j.addma.2015.03.006
    34 https://doi.org/10.1016/j.apsusc.2006.05.126
    35 https://doi.org/10.1016/j.apsusc.2009.04.135
    36 https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.072
    37 https://doi.org/10.1016/j.ijmachtools.2006.05.001
    38 https://doi.org/10.1016/j.jallcom.2015.01.256
    39 https://doi.org/10.1016/j.jmatprotec.2008.03.005
    40 https://doi.org/10.1016/j.matdes.2004.03.008
    41 https://doi.org/10.1016/j.procir.2015.08.061
    42 https://doi.org/10.1016/j.scriptamat.2005.10.028
    43 https://doi.org/10.1016/j.surfcoat.2011.05.038
    44 https://doi.org/10.1016/s0026-0657(14)70274-7
    45 https://doi.org/10.1016/s0257-8972(02)00919-2
    46 https://doi.org/10.1016/s1359-6454(03)00274-x
    47 https://doi.org/10.1115/isfa2012-7256
    48 https://doi.org/10.2320/matertrans.47.1697
    49 https://doi.org/10.4028/www.scientific.net/amr.89-91.639
    50 https://doi.org/10.4028/www.scientific.net/kem.533.53
    51 https://doi.org/10.4028/www.scientific.net/msf.618-619.505
    52 https://doi.org/10.4028/www.scientific.net/msf.654-656.898
    53 schema:datePublished 2017-04
    54 schema:datePublishedReg 2017-04-01
    55 schema:description Titanium parts are ideally suited for aerospace applications due to their unique combination of high specific strength and excellent corrosion resistance. However, titanium as bulk material is expensive and challenging/costly to machine. Production of complex titanium parts through additive manufacturing looks promising, but there are still many barriers to overcome before reaching mainstream commercialization. The cold gas dynamic spraying process offers the potential for additive manufacturing of large titanium parts due to its reduced reactive environment, its simplicity to operate, and the high deposition rates it offers. A few challenges are to be addressed before the additive manufacturing potential of titanium by cold gas dynamic spraying can be reached. In particular, it is known that titanium is easy to deposit by cold gas dynamic spraying, but the deposits produced are usually porous when nitrogen is used as the carrier gas. In this work, a method to manufacture low-porosity titanium components at high deposition efficiencies is revealed. The components are produced by combining low-pressure cold spray using nitrogen as the carrier gas with low-cost titanium powder produced using the Armstrong process. The microstructure and mechanical properties of additive manufactured titanium components are investigated.
    56 schema:genre research_article
    57 schema:inLanguage en
    58 schema:isAccessibleForFree true
    59 schema:isPartOf N76d39344cc364759a20eff79ba87c2f7
    60 Nf0cc4a91a5eb4fdab2fdba2adf1b86b5
    61 sg:journal.1136229
    62 schema:name Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing
    63 schema:pagination 598-609
    64 schema:productId N2a2f52cee91d4cd78183f167c01d3792
    65 N41afc43a066d41eb9291f5065627b43e
    66 Na140d423f1ef423ab67b93ddf4cbd029
    67 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044507385
    68 https://doi.org/10.1007/s11666-016-0489-2
    69 schema:sdDatePublished 2019-04-11T10:20
    70 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    71 schema:sdPublisher N54291e42165a4c37a9832db42cb78a2e
    72 schema:url https://link.springer.com/10.1007%2Fs11666-016-0489-2
    73 sgo:license sg:explorer/license/
    74 sgo:sdDataset articles
    75 rdf:type schema:ScholarlyArticle
    76 N0482c8686964422d9d95e3654f590ae8 rdf:first sg:person.015011165522.92
    77 rdf:rest Na9b0adea01c74ffc8fdc4d84028ffa04
    78 N0ce71a232e7c440f830db2e05e39baa3 rdf:first sg:person.010773140557.08
    79 rdf:rest N9c57594be49e49038960271d81b4f6fa
    80 N2a2f52cee91d4cd78183f167c01d3792 schema:name readcube_id
    81 schema:value d4014eb02684167ad526bfa4a34a4e5953611a22e2d1fdcde6771d2e969d407f
    82 rdf:type schema:PropertyValue
    83 N41afc43a066d41eb9291f5065627b43e schema:name dimensions_id
    84 schema:value pub.1044507385
    85 rdf:type schema:PropertyValue
    86 N54291e42165a4c37a9832db42cb78a2e schema:name Springer Nature - SN SciGraph project
    87 rdf:type schema:Organization
    88 N76d39344cc364759a20eff79ba87c2f7 schema:volumeNumber 26
    89 rdf:type schema:PublicationVolume
    90 N9c57594be49e49038960271d81b4f6fa rdf:first sg:person.014760656671.84
    91 rdf:rest N0482c8686964422d9d95e3654f590ae8
    92 Na140d423f1ef423ab67b93ddf4cbd029 schema:name doi
    93 schema:value 10.1007/s11666-016-0489-2
    94 rdf:type schema:PropertyValue
    95 Na9b0adea01c74ffc8fdc4d84028ffa04 rdf:first sg:person.01260234472.39
    96 rdf:rest rdf:nil
    97 Nf0cc4a91a5eb4fdab2fdba2adf1b86b5 schema:issueNumber 4
    98 rdf:type schema:PublicationIssue
    99 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    100 schema:name Engineering
    101 rdf:type schema:DefinedTerm
    102 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    103 schema:name Materials Engineering
    104 rdf:type schema:DefinedTerm
    105 sg:journal.1136229 schema:issn 1059-9630
    106 1544-1016
    107 schema:name Journal of Thermal Spray Technology
    108 rdf:type schema:Periodical
    109 sg:person.010773140557.08 schema:affiliation https://www.grid.ac/institutes/grid.28046.38
    110 schema:familyName MacDonald
    111 schema:givenName D.
    112 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010773140557.08
    113 rdf:type schema:Person
    114 sg:person.01260234472.39 schema:affiliation https://www.grid.ac/institutes/grid.28046.38
    115 schema:familyName Jodoin
    116 schema:givenName B.
    117 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01260234472.39
    118 rdf:type schema:Person
    119 sg:person.014760656671.84 schema:affiliation https://www.grid.ac/institutes/grid.28046.38
    120 schema:familyName Fernández
    121 schema:givenName R.
    122 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014760656671.84
    123 rdf:type schema:Person
    124 sg:person.015011165522.92 schema:affiliation https://www.grid.ac/institutes/grid.28046.38
    125 schema:familyName Delloro
    126 schema:givenName F.
    127 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015011165522.92
    128 rdf:type schema:Person
    129 sg:pub.10.1007/978-1-4939-2113-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020610268
    130 https://doi.org/10.1007/978-1-4939-2113-3
    131 rdf:type schema:CreativeWork
    132 sg:pub.10.1007/978-3-319-16772-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013962264
    133 https://doi.org/10.1007/978-3-319-16772-5
    134 rdf:type schema:CreativeWork
    135 sg:pub.10.1007/bf02647044 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033754466
    136 https://doi.org/10.1007/bf02647044
    137 rdf:type schema:CreativeWork
    138 sg:pub.10.1007/s00170-013-5166-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043675699
    139 https://doi.org/10.1007/s00170-013-5166-8
    140 rdf:type schema:CreativeWork
    141 sg:pub.10.1007/s11465-013-0248-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044425730
    142 https://doi.org/10.1007/s11465-013-0248-8
    143 rdf:type schema:CreativeWork
    144 sg:pub.10.1007/s11665-014-0958-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1032374549
    145 https://doi.org/10.1007/s11665-014-0958-z
    146 rdf:type schema:CreativeWork
    147 sg:pub.10.1007/s11666-009-9298-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036942547
    148 https://doi.org/10.1007/s11666-009-9298-1
    149 rdf:type schema:CreativeWork
    150 sg:pub.10.1007/s11666-009-9454-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000834124
    151 https://doi.org/10.1007/s11666-009-9454-7
    152 rdf:type schema:CreativeWork
    153 sg:pub.10.1007/s11666-010-9568-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1027262816
    154 https://doi.org/10.1007/s11666-010-9568-y
    155 rdf:type schema:CreativeWork
    156 sg:pub.10.1007/s11666-011-9720-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013599518
    157 https://doi.org/10.1007/s11666-011-9720-3
    158 rdf:type schema:CreativeWork
    159 sg:pub.10.1007/s11666-013-0051-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044872551
    160 https://doi.org/10.1007/s11666-013-0051-4
    161 rdf:type schema:CreativeWork
    162 sg:pub.10.1007/s11666-013-9951-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049289842
    163 https://doi.org/10.1007/s11666-013-9951-6
    164 rdf:type schema:CreativeWork
    165 sg:pub.10.1007/s11666-013-9968-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1010283865
    166 https://doi.org/10.1007/s11666-013-9968-x
    167 rdf:type schema:CreativeWork
    168 sg:pub.10.1007/s11666-014-0116-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1024598447
    169 https://doi.org/10.1007/s11666-014-0116-z
    170 rdf:type schema:CreativeWork
    171 sg:pub.10.1007/s11666-014-0130-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010545885
    172 https://doi.org/10.1007/s11666-014-0130-1
    173 rdf:type schema:CreativeWork
    174 sg:pub.10.1007/s11666-014-0203-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011620763
    175 https://doi.org/10.1007/s11666-014-0203-1
    176 rdf:type schema:CreativeWork
    177 sg:pub.10.1007/s11666-015-0317-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001920986
    178 https://doi.org/10.1007/s11666-015-0317-0
    179 rdf:type schema:CreativeWork
    180 sg:pub.10.1007/s11668-008-9116-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1030281961
    181 https://doi.org/10.1007/s11668-008-9116-y
    182 rdf:type schema:CreativeWork
    183 sg:pub.10.1038/nrm3209 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015983865
    184 https://doi.org/10.1038/nrm3209
    185 rdf:type schema:CreativeWork
    186 sg:pub.10.1361/105996305x59369 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005132443
    187 https://doi.org/10.1361/105996305x59369
    188 rdf:type schema:CreativeWork
    189 sg:pub.10.1361/105996306x108066 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037513785
    190 https://doi.org/10.1361/105996306x108066
    191 rdf:type schema:CreativeWork
    192 sg:pub.10.1361/105996306x108138 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023425098
    193 https://doi.org/10.1361/105996306x108138
    194 rdf:type schema:CreativeWork
    195 sg:pub.10.1361/105996306x147144 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006341373
    196 https://doi.org/10.1361/105996306x147144
    197 rdf:type schema:CreativeWork
    198 sg:pub.10.1361/105996398770350945 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043400429
    199 https://doi.org/10.1361/105996398770350945
    200 rdf:type schema:CreativeWork
    201 https://app.dimensions.ai/details/publication/pub.1020610268 schema:CreativeWork
    202 https://doi.org/10.1016/b978-0-12-800054-0.00009-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027587397
    203 rdf:type schema:CreativeWork
    204 https://doi.org/10.1016/b978-0-12-800054-0.00011-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004584468
    205 rdf:type schema:CreativeWork
    206 https://doi.org/10.1016/j.actamat.2005.10.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007253959
    207 rdf:type schema:CreativeWork
    208 https://doi.org/10.1016/j.actamat.2008.06.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018320619
    209 rdf:type schema:CreativeWork
    210 https://doi.org/10.1016/j.addma.2015.03.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018579568
    211 rdf:type schema:CreativeWork
    212 https://doi.org/10.1016/j.apsusc.2006.05.126 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022055979
    213 rdf:type schema:CreativeWork
    214 https://doi.org/10.1016/j.apsusc.2009.04.135 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041342123
    215 rdf:type schema:CreativeWork
    216 https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.072 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045501655
    217 rdf:type schema:CreativeWork
    218 https://doi.org/10.1016/j.ijmachtools.2006.05.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010848541
    219 rdf:type schema:CreativeWork
    220 https://doi.org/10.1016/j.jallcom.2015.01.256 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042227789
    221 rdf:type schema:CreativeWork
    222 https://doi.org/10.1016/j.jmatprotec.2008.03.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036384579
    223 rdf:type schema:CreativeWork
    224 https://doi.org/10.1016/j.matdes.2004.03.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048002911
    225 rdf:type schema:CreativeWork
    226 https://doi.org/10.1016/j.procir.2015.08.061 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006627830
    227 rdf:type schema:CreativeWork
    228 https://doi.org/10.1016/j.scriptamat.2005.10.028 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009703852
    229 rdf:type schema:CreativeWork
    230 https://doi.org/10.1016/j.surfcoat.2011.05.038 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001978339
    231 rdf:type schema:CreativeWork
    232 https://doi.org/10.1016/s0026-0657(14)70274-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002692104
    233 rdf:type schema:CreativeWork
    234 https://doi.org/10.1016/s0257-8972(02)00919-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007737993
    235 rdf:type schema:CreativeWork
    236 https://doi.org/10.1016/s1359-6454(03)00274-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1020725941
    237 rdf:type schema:CreativeWork
    238 https://doi.org/10.1115/isfa2012-7256 schema:sameAs https://app.dimensions.ai/details/publication/pub.1092828130
    239 rdf:type schema:CreativeWork
    240 https://doi.org/10.2320/matertrans.47.1697 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014468460
    241 rdf:type schema:CreativeWork
    242 https://doi.org/10.4028/www.scientific.net/amr.89-91.639 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021337900
    243 rdf:type schema:CreativeWork
    244 https://doi.org/10.4028/www.scientific.net/kem.533.53 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072087333
    245 rdf:type schema:CreativeWork
    246 https://doi.org/10.4028/www.scientific.net/msf.618-619.505 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072130510
    247 rdf:type schema:CreativeWork
    248 https://doi.org/10.4028/www.scientific.net/msf.654-656.898 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072133725
    249 rdf:type schema:CreativeWork
    250 https://www.grid.ac/institutes/grid.28046.38 schema:alternateName University of Ottawa
    251 schema:name University of Ottawa Cold Spray Laboratory, Ottawa, ON, Canada
    252 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...