The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats View Full Text


Ontology type: schema:ScholarlyArticle      Open Access: True


Article Info

DATE

2012-03

AUTHORS

Dina Goldbaum, J. Michael Shockley, Richard R. Chromik, Ahmad Rezaeian, Stephen Yue, Jean-Gabriel Legoux, Eric Irissou

ABSTRACT

Cold spray is a complex process where many parameters have to be considered in order to achieve optimized material deposition and properties. In the cold spray process, deposition velocity influences the degree of material deformation and material adhesion. While most materials can be easily deposited at relatively low deposition velocity (<700 m/s), this is not the case for high yield strength materials like Ti and its alloys. In the present study, we evaluate the effects of deposition velocity, powder size, particle position in the gas jet, gas temperature, and substrate temperature on the adhesion strength of cold spayed Ti and Ti6Al4V splats. A micromechanical test technique was used to shear individual splats of Ti or Ti6Al4V and measure their adhesion strength. The splats were deposited onto Ti or Ti6Al4V substrates over a range of deposition conditions with either nitrogen or helium as the propelling gas. The splat adhesion testing coupled with microstructural characterization was used to define the strength, the type and the continuity of the bonded interface between splat and substrate material. The results demonstrated that optimization of spray conditions makes it possible to obtain splats with continuous bonding along the splat/substrate interface and measured adhesion strengths approaching the shear strength of bulk material. The parameters shown to improve the splat adhesion included the increase of the splat deposition velocity well above the critical deposition velocity of the tested material, increase in the temperature of both powder and the substrate material, decrease in the powder size, and optimization of the flow dynamics for the cold spray gun nozzle. Through comparisons to the literature, the adhesion strength of Ti splats measured with the splat adhesion technique correlated well with the cohesion strength of Ti coatings deposited under similar conditions and measured with tubular coating tensile (TCT) test. More... »

PAGES

288-303

References to SciGraph publications

  • 2003. Titanium in NONE
  • 2007-12. Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2006-12. Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2007-12. A Three-Dimensional Analysis of the Cold Spray Process: The Effects of Substrate Location and Shape in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2009-09. Effects of Temperature of In-flight Particles on Bonding and Microstructure in Warm-Sprayed Titanium Deposits in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2009-12. Assessment of CFD Modeling via Flow Visualization in Cold Spray Process in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2003-06. On some aspects of gas dynamics of the cold spray process in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2009-09. Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2011-01. Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2011-03. Mechanical Property Mapping of Cold Sprayed Ti Splats and Coatings in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2006-06. Production of titanium deposits by cold-gas dynamic spray: Numerical modeling and experimental characterization in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2006-12. New developments in cold spray based on higher gas and particle temperatures in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2006-06. Examination of the critical velocity for deposition of particles in cold spraying in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 1989-05. An analysis of the low temperature, low and high strain-rate deformation of Ti−6Al−4V in METALLURGICAL TRANSACTIONS A
  • 2005-03. A systematic approach to material eligibility for the cold-spray process in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2009-09. Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2009-03. Characterization of Cold Spray Titanium Supersonic Jet in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2011-01. Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2001-06. The features of cold spray nozzle design in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11666-011-9720-3

    DOI

    http://dx.doi.org/10.1007/s11666-011-9720-3

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1013599518


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "McGill University", 
              "id": "https://www.grid.ac/institutes/grid.14709.3b", 
              "name": [
                "Department of Mining and Materials Engineering, McGill University, 3610 University Street, H3A 2B2, Montreal, QC, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Goldbaum", 
            "givenName": "Dina", 
            "id": "sg:person.014501664035.24", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014501664035.24"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "McGill University", 
              "id": "https://www.grid.ac/institutes/grid.14709.3b", 
              "name": [
                "Department of Mining and Materials Engineering, McGill University, 3610 University Street, H3A 2B2, Montreal, QC, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Shockley", 
            "givenName": "J. Michael", 
            "id": "sg:person.011054111141.65", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011054111141.65"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "McGill University", 
              "id": "https://www.grid.ac/institutes/grid.14709.3b", 
              "name": [
                "Department of Mining and Materials Engineering, McGill University, 3610 University Street, H3A 2B2, Montreal, QC, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Chromik", 
            "givenName": "Richard R.", 
            "id": "sg:person.013715713026.16", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013715713026.16"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "McGill University", 
              "id": "https://www.grid.ac/institutes/grid.14709.3b", 
              "name": [
                "Department of Mining and Materials Engineering, McGill University, 3610 University Street, H3A 2B2, Montreal, QC, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Rezaeian", 
            "givenName": "Ahmad", 
            "id": "sg:person.016010223041.12", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016010223041.12"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "McGill University", 
              "id": "https://www.grid.ac/institutes/grid.14709.3b", 
              "name": [
                "Department of Mining and Materials Engineering, McGill University, 3610 University Street, H3A 2B2, Montreal, QC, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Yue", 
            "givenName": "Stephen", 
            "id": "sg:person.01251665536.53", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01251665536.53"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "National Research Council Canada", 
              "id": "https://www.grid.ac/institutes/grid.24433.32", 
              "name": [
                "Industrial Materials Institute, National Research Council Canada, Boucherville, QC, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Legoux", 
            "givenName": "Jean-Gabriel", 
            "id": "sg:person.014101166752.63", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014101166752.63"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "National Research Council Canada", 
              "id": "https://www.grid.ac/institutes/grid.24433.32", 
              "name": [
                "Industrial Materials Institute, National Research Council Canada, Boucherville, QC, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Irissou", 
            "givenName": "Eric", 
            "id": "sg:person.011237501171.04", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011237501171.04"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/bf02651653", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002649954", 
              "https://doi.org/10.1007/bf02651653"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02651653", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002649954", 
              "https://doi.org/10.1007/bf02651653"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2010.07.037", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005629411"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996306x147144", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006341373", 
              "https://doi.org/10.1361/105996306x147144"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actamat.2005.10.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007253959"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-009-9303-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008777758", 
              "https://doi.org/10.1007/s11666-009-9303-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-008-9278-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010438372", 
              "https://doi.org/10.1007/s11666-008-9278-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.apsusc.2009.09.104", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012890225"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-009-9327-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017930789", 
              "https://doi.org/10.1007/s11666-009-9327-0"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-009-9327-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017930789", 
              "https://doi.org/10.1007/s11666-009-9327-0"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actamat.2008.06.003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018320619"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/adem.200700022", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018841110"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996303770348384", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019871275", 
              "https://doi.org/10.1361/105996303770348384"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00274-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020725941"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00274-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020725941"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/amr.89-91.639", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021337900"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijsolstr.2005.07.014", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024287726"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijsolstr.2005.07.014", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024287726"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996306x108093", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024740260", 
              "https://doi.org/10.1361/105996306x108093"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-010-9546-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024878000", 
              "https://doi.org/10.1007/s11666-010-9546-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-010-9568-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027262816", 
              "https://doi.org/10.1007/s11666-010-9568-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-010-9568-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027262816", 
              "https://doi.org/10.1007/s11666-010-9568-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996301770349466", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028312823", 
              "https://doi.org/10.1361/105996301770349466"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actamat.2009.07.061", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028400406"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-010-9557-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028452386", 
              "https://doi.org/10.1007/s11666-010-9557-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-010-9557-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028452386", 
              "https://doi.org/10.1007/s11666-010-9557-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-009-9363-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1029427191", 
              "https://doi.org/10.1007/s11666-009-9363-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-009-9363-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1029427191", 
              "https://doi.org/10.1007/s11666-009-9363-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/10599630522738", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1032520970", 
              "https://doi.org/10.1361/10599630522738"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0167-6636(97)00036-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1034651491"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-009-9298-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036942547", 
              "https://doi.org/10.1007/s11666-009-9298-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msea.2011.09.083", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037404612"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1166/nnl.2010.1106", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039059533"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2005.09.022", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041784015"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-007-9091-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042555455", 
              "https://doi.org/10.1007/s11666-007-9091-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1557/jmr.1992.1564", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043643805"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://app.dimensions.ai/details/publication/pub.1045022490", 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-3-540-71398-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045022490", 
              "https://doi.org/10.1007/978-3-540-71398-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-3-540-71398-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045022490", 
              "https://doi.org/10.1007/978-3-540-71398-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-007-9082-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045241202", 
              "https://doi.org/10.1007/s11666-007-9082-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2004.03.008", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048002911"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996306x108219", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048604655", 
              "https://doi.org/10.1361/105996306x108219"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996306x147108", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049786482", 
              "https://doi.org/10.1361/105996306x147108"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/jbm.a.32907", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050520370"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/jbm.a.32907", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050520370"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1088/0022-3727/42/6/065304", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050635847"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.apsusc.2007.06.026", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052825344"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1063/1.1789278", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1057822165"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1109/tchmt.1984.1136367", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1061548429"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1201/9781420006063", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1095903481"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2012-03", 
        "datePublishedReg": "2012-03-01", 
        "description": "Cold spray is a complex process where many parameters have to be considered in order to achieve optimized material deposition and properties. In the cold spray process, deposition velocity influences the degree of material deformation and material adhesion. While most materials can be easily deposited at relatively low deposition velocity (<700 m/s), this is not the case for high yield strength materials like Ti and its alloys. In the present study, we evaluate the effects of deposition velocity, powder size, particle position in the gas jet, gas temperature, and substrate temperature on the adhesion strength of cold spayed Ti and Ti6Al4V splats. A micromechanical test technique was used to shear individual splats of Ti or Ti6Al4V and measure their adhesion strength. The splats were deposited onto Ti or Ti6Al4V substrates over a range of deposition conditions with either nitrogen or helium as the propelling gas. The splat adhesion testing coupled with microstructural characterization was used to define the strength, the type and the continuity of the bonded interface between splat and substrate material. The results demonstrated that optimization of spray conditions makes it possible to obtain splats with continuous bonding along the splat/substrate interface and measured adhesion strengths approaching the shear strength of bulk material. The parameters shown to improve the splat adhesion included the increase of the splat deposition velocity well above the critical deposition velocity of the tested material, increase in the temperature of both powder and the substrate material, decrease in the powder size, and optimization of the flow dynamics for the cold spray gun nozzle. Through comparisons to the literature, the adhesion strength of Ti splats measured with the splat adhesion technique correlated well with the cohesion strength of Ti coatings deposited under similar conditions and measured with tubular coating tensile (TCT) test.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s11666-011-9720-3", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": true, 
        "isPartOf": [
          {
            "id": "sg:journal.1136229", 
            "issn": [
              "1059-9630", 
              "1544-1016"
            ], 
            "name": "Journal of Thermal Spray Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "2", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "21"
          }
        ], 
        "name": "The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats", 
        "pagination": "288-303", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "40c90c81fca3611a39591cdfb307ca269a89dac4e604529b5f3b70032d9ac7b5"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11666-011-9720-3"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1013599518"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11666-011-9720-3", 
          "https://app.dimensions.ai/details/publication/pub.1013599518"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-10T19:11", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8678_00000521.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1007%2Fs11666-011-9720-3"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11666-011-9720-3'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11666-011-9720-3'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11666-011-9720-3'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11666-011-9720-3'


     

    This table displays all metadata directly associated to this object as RDF triples.

    247 TRIPLES      21 PREDICATES      68 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11666-011-9720-3 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author Nf69f644bb56e4f2084a2dda6e500b3e3
    4 schema:citation sg:pub.10.1007/978-3-540-71398-2
    5 sg:pub.10.1007/bf02651653
    6 sg:pub.10.1007/s11666-007-9082-z
    7 sg:pub.10.1007/s11666-007-9091-y
    8 sg:pub.10.1007/s11666-008-9278-x
    9 sg:pub.10.1007/s11666-009-9298-1
    10 sg:pub.10.1007/s11666-009-9303-8
    11 sg:pub.10.1007/s11666-009-9327-0
    12 sg:pub.10.1007/s11666-009-9363-9
    13 sg:pub.10.1007/s11666-010-9546-4
    14 sg:pub.10.1007/s11666-010-9557-1
    15 sg:pub.10.1007/s11666-010-9568-y
    16 sg:pub.10.1361/105996301770349466
    17 sg:pub.10.1361/105996303770348384
    18 sg:pub.10.1361/10599630522738
    19 sg:pub.10.1361/105996306x108093
    20 sg:pub.10.1361/105996306x108219
    21 sg:pub.10.1361/105996306x147108
    22 sg:pub.10.1361/105996306x147144
    23 https://app.dimensions.ai/details/publication/pub.1045022490
    24 https://doi.org/10.1002/adem.200700022
    25 https://doi.org/10.1002/jbm.a.32907
    26 https://doi.org/10.1016/j.actamat.2005.10.005
    27 https://doi.org/10.1016/j.actamat.2008.06.003
    28 https://doi.org/10.1016/j.actamat.2009.07.061
    29 https://doi.org/10.1016/j.apsusc.2007.06.026
    30 https://doi.org/10.1016/j.apsusc.2009.09.104
    31 https://doi.org/10.1016/j.ijsolstr.2005.07.014
    32 https://doi.org/10.1016/j.matdes.2004.03.008
    33 https://doi.org/10.1016/j.msea.2011.09.083
    34 https://doi.org/10.1016/j.surfcoat.2005.09.022
    35 https://doi.org/10.1016/j.surfcoat.2010.07.037
    36 https://doi.org/10.1016/s0167-6636(97)00036-7
    37 https://doi.org/10.1016/s1359-6454(03)00274-x
    38 https://doi.org/10.1063/1.1789278
    39 https://doi.org/10.1088/0022-3727/42/6/065304
    40 https://doi.org/10.1109/tchmt.1984.1136367
    41 https://doi.org/10.1166/nnl.2010.1106
    42 https://doi.org/10.1201/9781420006063
    43 https://doi.org/10.1557/jmr.1992.1564
    44 https://doi.org/10.4028/www.scientific.net/amr.89-91.639
    45 schema:datePublished 2012-03
    46 schema:datePublishedReg 2012-03-01
    47 schema:description Cold spray is a complex process where many parameters have to be considered in order to achieve optimized material deposition and properties. In the cold spray process, deposition velocity influences the degree of material deformation and material adhesion. While most materials can be easily deposited at relatively low deposition velocity (<700 m/s), this is not the case for high yield strength materials like Ti and its alloys. In the present study, we evaluate the effects of deposition velocity, powder size, particle position in the gas jet, gas temperature, and substrate temperature on the adhesion strength of cold spayed Ti and Ti6Al4V splats. A micromechanical test technique was used to shear individual splats of Ti or Ti6Al4V and measure their adhesion strength. The splats were deposited onto Ti or Ti6Al4V substrates over a range of deposition conditions with either nitrogen or helium as the propelling gas. The splat adhesion testing coupled with microstructural characterization was used to define the strength, the type and the continuity of the bonded interface between splat and substrate material. The results demonstrated that optimization of spray conditions makes it possible to obtain splats with continuous bonding along the splat/substrate interface and measured adhesion strengths approaching the shear strength of bulk material. The parameters shown to improve the splat adhesion included the increase of the splat deposition velocity well above the critical deposition velocity of the tested material, increase in the temperature of both powder and the substrate material, decrease in the powder size, and optimization of the flow dynamics for the cold spray gun nozzle. Through comparisons to the literature, the adhesion strength of Ti splats measured with the splat adhesion technique correlated well with the cohesion strength of Ti coatings deposited under similar conditions and measured with tubular coating tensile (TCT) test.
    48 schema:genre research_article
    49 schema:inLanguage en
    50 schema:isAccessibleForFree true
    51 schema:isPartOf N98c518b1048d4841a1187a8aba5bd915
    52 Naa267be4f7784bf58d560abc62eedf55
    53 sg:journal.1136229
    54 schema:name The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats
    55 schema:pagination 288-303
    56 schema:productId N10e302fd74684ef7879fae2d9061e94f
    57 N5f241a2fb81f4480b2021c44d101b7ab
    58 N8bc21b07deaf486f80636fb405a64fef
    59 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013599518
    60 https://doi.org/10.1007/s11666-011-9720-3
    61 schema:sdDatePublished 2019-04-10T19:11
    62 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    63 schema:sdPublisher N804db3eec08c43afb58b2ed1668806a9
    64 schema:url http://link.springer.com/10.1007%2Fs11666-011-9720-3
    65 sgo:license sg:explorer/license/
    66 sgo:sdDataset articles
    67 rdf:type schema:ScholarlyArticle
    68 N10e302fd74684ef7879fae2d9061e94f schema:name dimensions_id
    69 schema:value pub.1013599518
    70 rdf:type schema:PropertyValue
    71 N2e8bba788a184448b3a7fc5c5d8f656b rdf:first sg:person.01251665536.53
    72 rdf:rest Ne51c63696b6c4000b85129653f9600dc
    73 N4f654f40ba52499fa7e230dcc53dbbce rdf:first sg:person.013715713026.16
    74 rdf:rest Nd2e378386fd148a5a3e6196e9f1e61ee
    75 N5f241a2fb81f4480b2021c44d101b7ab schema:name readcube_id
    76 schema:value 40c90c81fca3611a39591cdfb307ca269a89dac4e604529b5f3b70032d9ac7b5
    77 rdf:type schema:PropertyValue
    78 N804db3eec08c43afb58b2ed1668806a9 schema:name Springer Nature - SN SciGraph project
    79 rdf:type schema:Organization
    80 N86f925d7371749fc8fbfdba0d70751a5 rdf:first sg:person.011237501171.04
    81 rdf:rest rdf:nil
    82 N8bc21b07deaf486f80636fb405a64fef schema:name doi
    83 schema:value 10.1007/s11666-011-9720-3
    84 rdf:type schema:PropertyValue
    85 N98c518b1048d4841a1187a8aba5bd915 schema:issueNumber 2
    86 rdf:type schema:PublicationIssue
    87 Naa267be4f7784bf58d560abc62eedf55 schema:volumeNumber 21
    88 rdf:type schema:PublicationVolume
    89 Nd2e378386fd148a5a3e6196e9f1e61ee rdf:first sg:person.016010223041.12
    90 rdf:rest N2e8bba788a184448b3a7fc5c5d8f656b
    91 Ndb136d5ccc9342828cef8bc2968d6cb8 rdf:first sg:person.011054111141.65
    92 rdf:rest N4f654f40ba52499fa7e230dcc53dbbce
    93 Ne51c63696b6c4000b85129653f9600dc rdf:first sg:person.014101166752.63
    94 rdf:rest N86f925d7371749fc8fbfdba0d70751a5
    95 Nf69f644bb56e4f2084a2dda6e500b3e3 rdf:first sg:person.014501664035.24
    96 rdf:rest Ndb136d5ccc9342828cef8bc2968d6cb8
    97 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    98 schema:name Engineering
    99 rdf:type schema:DefinedTerm
    100 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    101 schema:name Materials Engineering
    102 rdf:type schema:DefinedTerm
    103 sg:journal.1136229 schema:issn 1059-9630
    104 1544-1016
    105 schema:name Journal of Thermal Spray Technology
    106 rdf:type schema:Periodical
    107 sg:person.011054111141.65 schema:affiliation https://www.grid.ac/institutes/grid.14709.3b
    108 schema:familyName Shockley
    109 schema:givenName J. Michael
    110 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011054111141.65
    111 rdf:type schema:Person
    112 sg:person.011237501171.04 schema:affiliation https://www.grid.ac/institutes/grid.24433.32
    113 schema:familyName Irissou
    114 schema:givenName Eric
    115 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011237501171.04
    116 rdf:type schema:Person
    117 sg:person.01251665536.53 schema:affiliation https://www.grid.ac/institutes/grid.14709.3b
    118 schema:familyName Yue
    119 schema:givenName Stephen
    120 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01251665536.53
    121 rdf:type schema:Person
    122 sg:person.013715713026.16 schema:affiliation https://www.grid.ac/institutes/grid.14709.3b
    123 schema:familyName Chromik
    124 schema:givenName Richard R.
    125 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013715713026.16
    126 rdf:type schema:Person
    127 sg:person.014101166752.63 schema:affiliation https://www.grid.ac/institutes/grid.24433.32
    128 schema:familyName Legoux
    129 schema:givenName Jean-Gabriel
    130 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014101166752.63
    131 rdf:type schema:Person
    132 sg:person.014501664035.24 schema:affiliation https://www.grid.ac/institutes/grid.14709.3b
    133 schema:familyName Goldbaum
    134 schema:givenName Dina
    135 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014501664035.24
    136 rdf:type schema:Person
    137 sg:person.016010223041.12 schema:affiliation https://www.grid.ac/institutes/grid.14709.3b
    138 schema:familyName Rezaeian
    139 schema:givenName Ahmad
    140 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016010223041.12
    141 rdf:type schema:Person
    142 sg:pub.10.1007/978-3-540-71398-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045022490
    143 https://doi.org/10.1007/978-3-540-71398-2
    144 rdf:type schema:CreativeWork
    145 sg:pub.10.1007/bf02651653 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002649954
    146 https://doi.org/10.1007/bf02651653
    147 rdf:type schema:CreativeWork
    148 sg:pub.10.1007/s11666-007-9082-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1045241202
    149 https://doi.org/10.1007/s11666-007-9082-z
    150 rdf:type schema:CreativeWork
    151 sg:pub.10.1007/s11666-007-9091-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1042555455
    152 https://doi.org/10.1007/s11666-007-9091-y
    153 rdf:type schema:CreativeWork
    154 sg:pub.10.1007/s11666-008-9278-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1010438372
    155 https://doi.org/10.1007/s11666-008-9278-x
    156 rdf:type schema:CreativeWork
    157 sg:pub.10.1007/s11666-009-9298-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036942547
    158 https://doi.org/10.1007/s11666-009-9298-1
    159 rdf:type schema:CreativeWork
    160 sg:pub.10.1007/s11666-009-9303-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008777758
    161 https://doi.org/10.1007/s11666-009-9303-8
    162 rdf:type schema:CreativeWork
    163 sg:pub.10.1007/s11666-009-9327-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017930789
    164 https://doi.org/10.1007/s11666-009-9327-0
    165 rdf:type schema:CreativeWork
    166 sg:pub.10.1007/s11666-009-9363-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1029427191
    167 https://doi.org/10.1007/s11666-009-9363-9
    168 rdf:type schema:CreativeWork
    169 sg:pub.10.1007/s11666-010-9546-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024878000
    170 https://doi.org/10.1007/s11666-010-9546-4
    171 rdf:type schema:CreativeWork
    172 sg:pub.10.1007/s11666-010-9557-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028452386
    173 https://doi.org/10.1007/s11666-010-9557-1
    174 rdf:type schema:CreativeWork
    175 sg:pub.10.1007/s11666-010-9568-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1027262816
    176 https://doi.org/10.1007/s11666-010-9568-y
    177 rdf:type schema:CreativeWork
    178 sg:pub.10.1361/105996301770349466 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028312823
    179 https://doi.org/10.1361/105996301770349466
    180 rdf:type schema:CreativeWork
    181 sg:pub.10.1361/105996303770348384 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019871275
    182 https://doi.org/10.1361/105996303770348384
    183 rdf:type schema:CreativeWork
    184 sg:pub.10.1361/10599630522738 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032520970
    185 https://doi.org/10.1361/10599630522738
    186 rdf:type schema:CreativeWork
    187 sg:pub.10.1361/105996306x108093 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024740260
    188 https://doi.org/10.1361/105996306x108093
    189 rdf:type schema:CreativeWork
    190 sg:pub.10.1361/105996306x108219 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048604655
    191 https://doi.org/10.1361/105996306x108219
    192 rdf:type schema:CreativeWork
    193 sg:pub.10.1361/105996306x147108 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049786482
    194 https://doi.org/10.1361/105996306x147108
    195 rdf:type schema:CreativeWork
    196 sg:pub.10.1361/105996306x147144 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006341373
    197 https://doi.org/10.1361/105996306x147144
    198 rdf:type schema:CreativeWork
    199 https://app.dimensions.ai/details/publication/pub.1045022490 schema:CreativeWork
    200 https://doi.org/10.1002/adem.200700022 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018841110
    201 rdf:type schema:CreativeWork
    202 https://doi.org/10.1002/jbm.a.32907 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050520370
    203 rdf:type schema:CreativeWork
    204 https://doi.org/10.1016/j.actamat.2005.10.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007253959
    205 rdf:type schema:CreativeWork
    206 https://doi.org/10.1016/j.actamat.2008.06.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018320619
    207 rdf:type schema:CreativeWork
    208 https://doi.org/10.1016/j.actamat.2009.07.061 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028400406
    209 rdf:type schema:CreativeWork
    210 https://doi.org/10.1016/j.apsusc.2007.06.026 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052825344
    211 rdf:type schema:CreativeWork
    212 https://doi.org/10.1016/j.apsusc.2009.09.104 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012890225
    213 rdf:type schema:CreativeWork
    214 https://doi.org/10.1016/j.ijsolstr.2005.07.014 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024287726
    215 rdf:type schema:CreativeWork
    216 https://doi.org/10.1016/j.matdes.2004.03.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048002911
    217 rdf:type schema:CreativeWork
    218 https://doi.org/10.1016/j.msea.2011.09.083 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037404612
    219 rdf:type schema:CreativeWork
    220 https://doi.org/10.1016/j.surfcoat.2005.09.022 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041784015
    221 rdf:type schema:CreativeWork
    222 https://doi.org/10.1016/j.surfcoat.2010.07.037 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005629411
    223 rdf:type schema:CreativeWork
    224 https://doi.org/10.1016/s0167-6636(97)00036-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034651491
    225 rdf:type schema:CreativeWork
    226 https://doi.org/10.1016/s1359-6454(03)00274-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1020725941
    227 rdf:type schema:CreativeWork
    228 https://doi.org/10.1063/1.1789278 schema:sameAs https://app.dimensions.ai/details/publication/pub.1057822165
    229 rdf:type schema:CreativeWork
    230 https://doi.org/10.1088/0022-3727/42/6/065304 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050635847
    231 rdf:type schema:CreativeWork
    232 https://doi.org/10.1109/tchmt.1984.1136367 schema:sameAs https://app.dimensions.ai/details/publication/pub.1061548429
    233 rdf:type schema:CreativeWork
    234 https://doi.org/10.1166/nnl.2010.1106 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039059533
    235 rdf:type schema:CreativeWork
    236 https://doi.org/10.1201/9781420006063 schema:sameAs https://app.dimensions.ai/details/publication/pub.1095903481
    237 rdf:type schema:CreativeWork
    238 https://doi.org/10.1557/jmr.1992.1564 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043643805
    239 rdf:type schema:CreativeWork
    240 https://doi.org/10.4028/www.scientific.net/amr.89-91.639 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021337900
    241 rdf:type schema:CreativeWork
    242 https://www.grid.ac/institutes/grid.14709.3b schema:alternateName McGill University
    243 schema:name Department of Mining and Materials Engineering, McGill University, 3610 University Street, H3A 2B2, Montreal, QC, Canada
    244 rdf:type schema:Organization
    245 https://www.grid.ac/institutes/grid.24433.32 schema:alternateName National Research Council Canada
    246 schema:name Industrial Materials Institute, National Research Council Canada, Boucherville, QC, Canada
    247 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...