Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray and In Situ Laser Remelting Process View Full Text


Ontology type: schema:ScholarlyArticle      Open Access: True


Article Info

DATE

2011-01

AUTHORS

Nicolas Serres, Françoise Hlawka, Sophie Costil, Cécile Langlade, Frédérique Machi

ABSTRACT

This paper deals with coating alternatives to hard chromium plating. Thermal spraying is already used in industry, but results are not always satisfactory for reasons of porosity and microstructures. In this study, atmospheric plasma spraying (APS) and in situ laser irradiation by diode laser processes were combined to modify the structural characteristics of thick NiCrBSi alloy layers. The microstructure evolution was studied, and results show that in situ laser remelting induced the growth of a dendritic structure, which strongly decreased the porosity of as-sprayed coatings and increased the adhesion on the substrate. Moreover, no phase transition after laser treatment was observed. Lastly, a mechanical investigation demonstrated that the combination between plasma spray and in situ melting with a diode laser could result in very good mechanical properties. The increase of the laser incident power involved an increase of the mean contact pressure, along with coating hardness. The hybrid process appears to be a possible alternative to hard chromium plating, in order to protect mechanical parts, because of the improved mechanical properties of the NiCrBSi layer. More... »

PAGES

336-343

References to SciGraph publications

  • 1999-06. Thick laser coatings: A review in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2007. Introduction to Contact Mechanics in NONE
  • 1989-03. Measurement of cohesion and adhesion strengths in alumina coatings produced by plasma spraying in JOURNAL OF MATERIALS SCIENCE LETTERS
  • 2008. Thermal Stress Resistance of Materials in NONE
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11666-010-9565-1

    DOI

    http://dx.doi.org/10.1007/s11666-010-9565-1

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1039473206


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Institut National des Sciences Appliqu\u00e9es de Strasbourg", 
              "id": "https://www.grid.ac/institutes/grid.435015.6", 
              "name": [
                "LG\u00e9Co-LISS, INSA de Strasbourg, 24 Boulevard de la Victoire, 67084, Strasbourg Cedex, France"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Serres", 
            "givenName": "Nicolas", 
            "id": "sg:person.015437744657.55", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015437744657.55"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Institut National des Sciences Appliqu\u00e9es de Strasbourg", 
              "id": "https://www.grid.ac/institutes/grid.435015.6", 
              "name": [
                "LG\u00e9Co-LISS, INSA de Strasbourg, 24 Boulevard de la Victoire, 67084, Strasbourg Cedex, France"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Hlawka", 
            "givenName": "Fran\u00e7oise", 
            "id": "sg:person.015541123655.35", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015541123655.35"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Technology of Belfort-Montb\u00e9liard", 
              "id": "https://www.grid.ac/institutes/grid.23082.3b", 
              "name": [
                "LERMPS, Universit\u00e9 de Technologie de Belfort-Montb\u00e9liard, site de S\u00e9venans, 90010, Belfort Cedex, France"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Costil", 
            "givenName": "Sophie", 
            "id": "sg:person.011651173313.08", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011651173313.08"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Technology of Belfort-Montb\u00e9liard", 
              "id": "https://www.grid.ac/institutes/grid.23082.3b", 
              "name": [
                "LERMPS, Universit\u00e9 de Technologie de Belfort-Montb\u00e9liard, site de S\u00e9venans, 90010, Belfort Cedex, France"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Langlade", 
            "givenName": "C\u00e9cile", 
            "id": "sg:person.011226374055.06", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011226374055.06"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Irepa Laser (France)", 
              "id": "https://www.grid.ac/institutes/grid.425159.e", 
              "name": [
                "IREPA LASER, Parc d\u2019Innovation, 67400, Illkirch-Graffenstaden, France"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Machi", 
            "givenName": "Fr\u00e9d\u00e9rique", 
            "id": "sg:person.012473070631.35", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012473070631.35"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/s0921-5093(01)01808-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001633530"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2009.07.011", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001745426"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996399770350502", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002180869", 
              "https://doi.org/10.1361/105996399770350502"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0169-4332(96)00570-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007598571"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/sur.1997.13.3.238", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009643649"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-0-387-68188-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014864424", 
              "https://doi.org/10.1007/978-0-387-68188-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-0-387-68188-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014864424", 
              "https://doi.org/10.1007/978-0-387-68188-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0301-679x(02)00144-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025590292"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0301-679x(02)00144-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025590292"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ceramint.2004.08.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030236802"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1468-6996(01)00047-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030981291"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2005.04.057", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035260046"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0301-679x(01)00023-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042044063"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1557/jmr.1992.1564", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043643805"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://app.dimensions.ai/details/publication/pub.1051643967", 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-3-540-71400-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051643967", 
              "https://doi.org/10.1007/978-3-540-71400-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-3-540-71400-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051643967", 
              "https://doi.org/10.1007/978-3-540-71400-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/10643389991259164", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053014185"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00725519", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053431417", 
              "https://doi.org/10.1007/bf00725519"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2011-01", 
        "datePublishedReg": "2011-01-01", 
        "description": "This paper deals with coating alternatives to hard chromium plating. Thermal spraying is already used in industry, but results are not always satisfactory for reasons of porosity and microstructures. In this study, atmospheric plasma spraying (APS) and in situ laser irradiation by diode laser processes were combined to modify the structural characteristics of thick NiCrBSi alloy layers. The microstructure evolution was studied, and results show that in situ laser remelting induced the growth of a dendritic structure, which strongly decreased the porosity of as-sprayed coatings and increased the adhesion on the substrate. Moreover, no phase transition after laser treatment was observed. Lastly, a mechanical investigation demonstrated that the combination between plasma spray and in situ melting with a diode laser could result in very good mechanical properties. The increase of the laser incident power involved an increase of the mean contact pressure, along with coating hardness. The hybrid process appears to be a possible alternative to hard chromium plating, in order to protect mechanical parts, because of the improved mechanical properties of the NiCrBSi layer.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s11666-010-9565-1", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": true, 
        "isPartOf": [
          {
            "id": "sg:journal.1136229", 
            "issn": [
              "1059-9630", 
              "1544-1016"
            ], 
            "name": "Journal of Thermal Spray Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "1-2", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "20"
          }
        ], 
        "name": "Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray and In Situ Laser Remelting Process", 
        "pagination": "336-343", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "bc085d553a919cc26c4a4c7bd0b5d0c6f88fe8eac1ca3c6175f4d21a9f99c85d"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11666-010-9565-1"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1039473206"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11666-010-9565-1", 
          "https://app.dimensions.ai/details/publication/pub.1039473206"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T10:54", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000351_0000000351/records_43252_00000000.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1007%2Fs11666-010-9565-1"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11666-010-9565-1'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11666-010-9565-1'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11666-010-9565-1'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11666-010-9565-1'


     

    This table displays all metadata directly associated to this object as RDF triples.

    146 TRIPLES      21 PREDICATES      43 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11666-010-9565-1 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N4d402715aed74b3f9fbf9dab48b8a3dd
    4 schema:citation sg:pub.10.1007/978-0-387-68188-7
    5 sg:pub.10.1007/978-3-540-71400-2
    6 sg:pub.10.1007/bf00725519
    7 sg:pub.10.1361/105996399770350502
    8 https://app.dimensions.ai/details/publication/pub.1051643967
    9 https://doi.org/10.1016/j.ceramint.2004.08.001
    10 https://doi.org/10.1016/j.surfcoat.2005.04.057
    11 https://doi.org/10.1016/j.surfcoat.2009.07.011
    12 https://doi.org/10.1016/s0169-4332(96)00570-3
    13 https://doi.org/10.1016/s0301-679x(01)00023-8
    14 https://doi.org/10.1016/s0301-679x(02)00144-5
    15 https://doi.org/10.1016/s0921-5093(01)01808-1
    16 https://doi.org/10.1016/s1468-6996(01)00047-x
    17 https://doi.org/10.1080/10643389991259164
    18 https://doi.org/10.1179/sur.1997.13.3.238
    19 https://doi.org/10.1557/jmr.1992.1564
    20 schema:datePublished 2011-01
    21 schema:datePublishedReg 2011-01-01
    22 schema:description This paper deals with coating alternatives to hard chromium plating. Thermal spraying is already used in industry, but results are not always satisfactory for reasons of porosity and microstructures. In this study, atmospheric plasma spraying (APS) and in situ laser irradiation by diode laser processes were combined to modify the structural characteristics of thick NiCrBSi alloy layers. The microstructure evolution was studied, and results show that in situ laser remelting induced the growth of a dendritic structure, which strongly decreased the porosity of as-sprayed coatings and increased the adhesion on the substrate. Moreover, no phase transition after laser treatment was observed. Lastly, a mechanical investigation demonstrated that the combination between plasma spray and in situ melting with a diode laser could result in very good mechanical properties. The increase of the laser incident power involved an increase of the mean contact pressure, along with coating hardness. The hybrid process appears to be a possible alternative to hard chromium plating, in order to protect mechanical parts, because of the improved mechanical properties of the NiCrBSi layer.
    23 schema:genre research_article
    24 schema:inLanguage en
    25 schema:isAccessibleForFree true
    26 schema:isPartOf N926add3119294050b6a65e27275276cc
    27 Na378c66da03f4a4fb5b4947bc91881cf
    28 sg:journal.1136229
    29 schema:name Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray and In Situ Laser Remelting Process
    30 schema:pagination 336-343
    31 schema:productId N512365c0ffcc4ae28db85c37099e57d9
    32 N66d4d8cce0a54aaab0e0640eeb9bab1d
    33 Nce7e6d2f7dcf41d6b07b176e77177772
    34 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039473206
    35 https://doi.org/10.1007/s11666-010-9565-1
    36 schema:sdDatePublished 2019-04-11T10:54
    37 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    38 schema:sdPublisher N82ffdd2cc46845ac85f17aed1563808e
    39 schema:url http://link.springer.com/10.1007%2Fs11666-010-9565-1
    40 sgo:license sg:explorer/license/
    41 sgo:sdDataset articles
    42 rdf:type schema:ScholarlyArticle
    43 N4d402715aed74b3f9fbf9dab48b8a3dd rdf:first sg:person.015437744657.55
    44 rdf:rest Nde554d0a33324e4aac9935a6a8172b0a
    45 N512365c0ffcc4ae28db85c37099e57d9 schema:name doi
    46 schema:value 10.1007/s11666-010-9565-1
    47 rdf:type schema:PropertyValue
    48 N66d4d8cce0a54aaab0e0640eeb9bab1d schema:name readcube_id
    49 schema:value bc085d553a919cc26c4a4c7bd0b5d0c6f88fe8eac1ca3c6175f4d21a9f99c85d
    50 rdf:type schema:PropertyValue
    51 N6f01451694c14ecbaa97a33326384bbb rdf:first sg:person.011226374055.06
    52 rdf:rest N6f6fbac97cae4d2eaa75c0b59ddcb45d
    53 N6f6fbac97cae4d2eaa75c0b59ddcb45d rdf:first sg:person.012473070631.35
    54 rdf:rest rdf:nil
    55 N80b568e406824473ae1c7b26a4b44b8a rdf:first sg:person.011651173313.08
    56 rdf:rest N6f01451694c14ecbaa97a33326384bbb
    57 N82ffdd2cc46845ac85f17aed1563808e schema:name Springer Nature - SN SciGraph project
    58 rdf:type schema:Organization
    59 N926add3119294050b6a65e27275276cc schema:volumeNumber 20
    60 rdf:type schema:PublicationVolume
    61 Na378c66da03f4a4fb5b4947bc91881cf schema:issueNumber 1-2
    62 rdf:type schema:PublicationIssue
    63 Nce7e6d2f7dcf41d6b07b176e77177772 schema:name dimensions_id
    64 schema:value pub.1039473206
    65 rdf:type schema:PropertyValue
    66 Nde554d0a33324e4aac9935a6a8172b0a rdf:first sg:person.015541123655.35
    67 rdf:rest N80b568e406824473ae1c7b26a4b44b8a
    68 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    69 schema:name Engineering
    70 rdf:type schema:DefinedTerm
    71 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    72 schema:name Materials Engineering
    73 rdf:type schema:DefinedTerm
    74 sg:journal.1136229 schema:issn 1059-9630
    75 1544-1016
    76 schema:name Journal of Thermal Spray Technology
    77 rdf:type schema:Periodical
    78 sg:person.011226374055.06 schema:affiliation https://www.grid.ac/institutes/grid.23082.3b
    79 schema:familyName Langlade
    80 schema:givenName Cécile
    81 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011226374055.06
    82 rdf:type schema:Person
    83 sg:person.011651173313.08 schema:affiliation https://www.grid.ac/institutes/grid.23082.3b
    84 schema:familyName Costil
    85 schema:givenName Sophie
    86 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011651173313.08
    87 rdf:type schema:Person
    88 sg:person.012473070631.35 schema:affiliation https://www.grid.ac/institutes/grid.425159.e
    89 schema:familyName Machi
    90 schema:givenName Frédérique
    91 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012473070631.35
    92 rdf:type schema:Person
    93 sg:person.015437744657.55 schema:affiliation https://www.grid.ac/institutes/grid.435015.6
    94 schema:familyName Serres
    95 schema:givenName Nicolas
    96 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015437744657.55
    97 rdf:type schema:Person
    98 sg:person.015541123655.35 schema:affiliation https://www.grid.ac/institutes/grid.435015.6
    99 schema:familyName Hlawka
    100 schema:givenName Françoise
    101 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015541123655.35
    102 rdf:type schema:Person
    103 sg:pub.10.1007/978-0-387-68188-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014864424
    104 https://doi.org/10.1007/978-0-387-68188-7
    105 rdf:type schema:CreativeWork
    106 sg:pub.10.1007/978-3-540-71400-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051643967
    107 https://doi.org/10.1007/978-3-540-71400-2
    108 rdf:type schema:CreativeWork
    109 sg:pub.10.1007/bf00725519 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053431417
    110 https://doi.org/10.1007/bf00725519
    111 rdf:type schema:CreativeWork
    112 sg:pub.10.1361/105996399770350502 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002180869
    113 https://doi.org/10.1361/105996399770350502
    114 rdf:type schema:CreativeWork
    115 https://app.dimensions.ai/details/publication/pub.1051643967 schema:CreativeWork
    116 https://doi.org/10.1016/j.ceramint.2004.08.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030236802
    117 rdf:type schema:CreativeWork
    118 https://doi.org/10.1016/j.surfcoat.2005.04.057 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035260046
    119 rdf:type schema:CreativeWork
    120 https://doi.org/10.1016/j.surfcoat.2009.07.011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001745426
    121 rdf:type schema:CreativeWork
    122 https://doi.org/10.1016/s0169-4332(96)00570-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007598571
    123 rdf:type schema:CreativeWork
    124 https://doi.org/10.1016/s0301-679x(01)00023-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042044063
    125 rdf:type schema:CreativeWork
    126 https://doi.org/10.1016/s0301-679x(02)00144-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025590292
    127 rdf:type schema:CreativeWork
    128 https://doi.org/10.1016/s0921-5093(01)01808-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001633530
    129 rdf:type schema:CreativeWork
    130 https://doi.org/10.1016/s1468-6996(01)00047-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1030981291
    131 rdf:type schema:CreativeWork
    132 https://doi.org/10.1080/10643389991259164 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053014185
    133 rdf:type schema:CreativeWork
    134 https://doi.org/10.1179/sur.1997.13.3.238 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009643649
    135 rdf:type schema:CreativeWork
    136 https://doi.org/10.1557/jmr.1992.1564 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043643805
    137 rdf:type schema:CreativeWork
    138 https://www.grid.ac/institutes/grid.23082.3b schema:alternateName University of Technology of Belfort-Montbéliard
    139 schema:name LERMPS, Université de Technologie de Belfort-Montbéliard, site de Sévenans, 90010, Belfort Cedex, France
    140 rdf:type schema:Organization
    141 https://www.grid.ac/institutes/grid.425159.e schema:alternateName Irepa Laser (France)
    142 schema:name IREPA LASER, Parc d’Innovation, 67400, Illkirch-Graffenstaden, France
    143 rdf:type schema:Organization
    144 https://www.grid.ac/institutes/grid.435015.6 schema:alternateName Institut National des Sciences Appliquées de Strasbourg
    145 schema:name LGéCo-LISS, INSA de Strasbourg, 24 Boulevard de la Victoire, 67084, Strasbourg Cedex, France
    146 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...