Mechanical Characteristics of Al-Co-Ce Coatings Produced by the Cold Spray Process View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2007-12

AUTHORS

E. Sansoucy, G.E. Kim, A.L. Moran, B. Jodoin

ABSTRACT

Gas atomized feedstock particles of an Al-13Co-26Ce alloy system were sprayed using the Cold Spray deposition technique. The microstructures of the coatings produced are examined and the mechanical characteristics, in particular the bending fatigue and the bond strength, of the Al-Co-Ce coatings are reported. The results show that the Al-Co-Ce coatings improved the fatigue behavior of AA 2024-T3 specimens when compared to uncoated and Alclad specimens. During the bond strength tests, the bonding agent failed and no delamination of the coating from the substrate occurred. The microstructural features of the feedstock powder were also found in the coatings. It is suggested that the increase in the fatigue properties of the specimens can be attributed to the residual compressive stresses induced in the coatings and to the high adhesion strength of the coatings to the substrates. More... »

PAGES

651-660

References to SciGraph publications

  • 2006-06. Cold-Spray processing of a nanocrystalline Al−Cu−Mg−Fe−Ni alloy with Sc in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2005-03. Cold spray deposition of nanocrystalline aluminum alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2006-12. Cold gas dynamic spraying of iron-base amorphous alloy in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 1996-03. Structure of aluminum powder coatings prepared by cold gasdynamic spraying in METAL SCIENCE AND HEAT TREATMENT
  • 2005-12. Effect of in-flight particle oxidation on the phase evolution of HVOF NiTiZrSiSn bulk amorphous coating in JOURNAL OF MATERIALS SCIENCE
  • 2002-12. Cold spray nozzle mach number limitation in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 1998-06. Gas dynamic principles of cold spray in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2002-03. Bulk amorphous metal—An emerging engineering material in JOM
  • 2004-06. Evaluation of coatings produced via kinetic and cold spray processes in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 1999-12. Impact of high velocity cold spray particles in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2000-09. Nanopowder deposition by supersonic rectangular jet impingement in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11666-007-9099-3

    DOI

    http://dx.doi.org/10.1007/s11666-007-9099-3

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1025516147


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "University of Ottawa", 
              "id": "https://www.grid.ac/institutes/grid.28046.38", 
              "name": [
                "Department of Mechanical Engineering, University of Ottawa, Ottawa, Ontario, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Sansoucy", 
            "givenName": "E.", 
            "id": "sg:person.01316101746.20", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01316101746.20"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "name": [
                "Perpetual Technologies, Iles des Soeurs, Quebec, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Kim", 
            "givenName": "G.E.", 
            "id": "sg:person.010644720371.73", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010644720371.73"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "United States Naval Academy", 
              "id": "https://www.grid.ac/institutes/grid.265465.6", 
              "name": [
                "Department of Mechanical Engineering, United States Naval Academy, Annapolis, MD, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Moran", 
            "givenName": "A.L.", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Ottawa", 
              "id": "https://www.grid.ac/institutes/grid.28046.38", 
              "name": [
                "Department of Mechanical Engineering, University of Ottawa, Ottawa, Ontario, Canada"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Jodoin", 
            "givenName": "B.", 
            "id": "sg:person.01260234472.39", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01260234472.39"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1361/105996306x107995", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001890732", 
              "https://doi.org/10.1361/105996306x107995"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996300770349854", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002297902", 
              "https://doi.org/10.1361/105996300770349854"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msea.2003.08.023", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002936137"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.corsci.2005.04.006", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1003440092"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msea.2006.05.095", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004419124"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0257-8972(97)00231-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007417006"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-005-3169-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008502927", 
              "https://doi.org/10.1007/s10853-005-3169-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-005-3169-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008502927", 
              "https://doi.org/10.1007/s10853-005-3169-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf01401446", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008607047", 
              "https://doi.org/10.1007/bf01401446"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0013-4686(02)00830-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012153478"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/adem.200500227", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012464555"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/adem.200500227", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012464555"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/10599630419427", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013645802", 
              "https://doi.org/10.1361/10599630419427"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00274-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020725941"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(03)00274-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020725941"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996399770350250", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020972880", 
              "https://doi.org/10.1361/105996399770350250"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(99)00300-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030352185"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0040-6090(02)00631-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035282566"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0040-6090(02)00631-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035282566"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0257-8972(02)00018-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036346971"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996306x146857", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039325750", 
              "https://doi.org/10.1361/105996306x146857"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-005-0182-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039498242", 
              "https://doi.org/10.1007/s11661-005-0182-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-005-0182-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039498242", 
              "https://doi.org/10.1007/s11661-005-0182-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02822619", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039875531", 
              "https://doi.org/10.1007/bf02822619"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02822619", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039875531", 
              "https://doi.org/10.1007/bf02822619"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/adem.200500103", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040231296"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/adem.200500103", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040231296"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996302770348628", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040726265", 
              "https://doi.org/10.1361/105996302770348628"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2005.09.022", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041784015"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105996398770350945", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043400429", 
              "https://doi.org/10.1361/105996398770350945"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2004.03.008", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048002911"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0010-938x(79)90008-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051238711"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0010-938x(79)90008-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051238711"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1149/1.1848261", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063188964"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1149/1.1943588", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063189236"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1149/1.1943588", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063189236"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://app.dimensions.ai/details/publication/pub.1106882027", 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/9781118520994", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1106882027"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2007-12", 
        "datePublishedReg": "2007-12-01", 
        "description": "Gas atomized feedstock particles of an Al-13Co-26Ce alloy system were sprayed using the Cold Spray deposition technique. The microstructures of the coatings produced are examined and the mechanical characteristics, in particular the bending fatigue and the bond strength, of the Al-Co-Ce coatings are reported. The results show that the Al-Co-Ce coatings improved the fatigue behavior of AA 2024-T3 specimens when compared to uncoated and Alclad specimens. During the bond strength tests, the bonding agent failed and no delamination of the coating from the substrate occurred. The microstructural features of the feedstock powder were also found in the coatings. It is suggested that the increase in the fatigue properties of the specimens can be attributed to the residual compressive stresses induced in the coatings and to the high adhesion strength of the coatings to the substrates.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s11666-007-9099-3", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136229", 
            "issn": [
              "1059-9630", 
              "1544-1016"
            ], 
            "name": "Journal of Thermal Spray Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "5-6", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "16"
          }
        ], 
        "name": "Mechanical Characteristics of Al-Co-Ce Coatings Produced by the Cold Spray Process", 
        "pagination": "651-660", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "798f63b9d33e8d6b0603c8f9339acad97495ecdc88f6a5b24673b1cd813b6616"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11666-007-9099-3"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1025516147"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11666-007-9099-3", 
          "https://app.dimensions.ai/details/publication/pub.1025516147"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-10T19:19", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8678_00000587.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1007%2Fs11666-007-9099-3"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11666-007-9099-3'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11666-007-9099-3'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11666-007-9099-3'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11666-007-9099-3'


     

    This table displays all metadata directly associated to this object as RDF triples.

    183 TRIPLES      21 PREDICATES      56 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11666-007-9099-3 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N13c1a20e82304318ba9cfd95a337b9cc
    4 schema:citation sg:pub.10.1007/bf01401446
    5 sg:pub.10.1007/bf02822619
    6 sg:pub.10.1007/s10853-005-3169-z
    7 sg:pub.10.1007/s11661-005-0182-4
    8 sg:pub.10.1361/105996300770349854
    9 sg:pub.10.1361/105996302770348628
    10 sg:pub.10.1361/10599630419427
    11 sg:pub.10.1361/105996306x107995
    12 sg:pub.10.1361/105996306x146857
    13 sg:pub.10.1361/105996398770350945
    14 sg:pub.10.1361/105996399770350250
    15 https://app.dimensions.ai/details/publication/pub.1106882027
    16 https://doi.org/10.1002/9781118520994
    17 https://doi.org/10.1002/adem.200500103
    18 https://doi.org/10.1002/adem.200500227
    19 https://doi.org/10.1016/0010-938x(79)90008-8
    20 https://doi.org/10.1016/j.corsci.2005.04.006
    21 https://doi.org/10.1016/j.matdes.2004.03.008
    22 https://doi.org/10.1016/j.msea.2003.08.023
    23 https://doi.org/10.1016/j.msea.2006.05.095
    24 https://doi.org/10.1016/j.surfcoat.2005.09.022
    25 https://doi.org/10.1016/s0013-4686(02)00830-7
    26 https://doi.org/10.1016/s0040-6090(02)00631-4
    27 https://doi.org/10.1016/s0257-8972(02)00018-x
    28 https://doi.org/10.1016/s0257-8972(97)00231-4
    29 https://doi.org/10.1016/s1359-6454(03)00274-x
    30 https://doi.org/10.1016/s1359-6454(99)00300-6
    31 https://doi.org/10.1149/1.1848261
    32 https://doi.org/10.1149/1.1943588
    33 schema:datePublished 2007-12
    34 schema:datePublishedReg 2007-12-01
    35 schema:description Gas atomized feedstock particles of an Al-13Co-26Ce alloy system were sprayed using the Cold Spray deposition technique. The microstructures of the coatings produced are examined and the mechanical characteristics, in particular the bending fatigue and the bond strength, of the Al-Co-Ce coatings are reported. The results show that the Al-Co-Ce coatings improved the fatigue behavior of AA 2024-T3 specimens when compared to uncoated and Alclad specimens. During the bond strength tests, the bonding agent failed and no delamination of the coating from the substrate occurred. The microstructural features of the feedstock powder were also found in the coatings. It is suggested that the increase in the fatigue properties of the specimens can be attributed to the residual compressive stresses induced in the coatings and to the high adhesion strength of the coatings to the substrates.
    36 schema:genre research_article
    37 schema:inLanguage en
    38 schema:isAccessibleForFree false
    39 schema:isPartOf Nae1a193c8adf49d2b6ebef1908843969
    40 Ne3ef372484b74454b2522204da013d03
    41 sg:journal.1136229
    42 schema:name Mechanical Characteristics of Al-Co-Ce Coatings Produced by the Cold Spray Process
    43 schema:pagination 651-660
    44 schema:productId N5d0b00f3495241c1add5d14e8892a8b8
    45 Nf65cf1ab483c44c991dcedcd9e1ead1a
    46 Nfd080a5e730f4fcc9bbb47e5901778c6
    47 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025516147
    48 https://doi.org/10.1007/s11666-007-9099-3
    49 schema:sdDatePublished 2019-04-10T19:19
    50 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    51 schema:sdPublisher N6ea8d66f0ad44da48f703421562d3a81
    52 schema:url http://link.springer.com/10.1007%2Fs11666-007-9099-3
    53 sgo:license sg:explorer/license/
    54 sgo:sdDataset articles
    55 rdf:type schema:ScholarlyArticle
    56 N05ad2e41e7a84c789d5162ac93116bec schema:name Perpetual Technologies, Iles des Soeurs, Quebec, Canada
    57 rdf:type schema:Organization
    58 N13c1a20e82304318ba9cfd95a337b9cc rdf:first sg:person.01316101746.20
    59 rdf:rest Nbaa1fff7662c46b5bc4b7102493e33a9
    60 N1b37212d26eb41ca93ea0cbfff255458 rdf:first N788e90c814484e6e83c8ca2727d4ed7e
    61 rdf:rest N5704333dfca840de8c695508470729e4
    62 N5704333dfca840de8c695508470729e4 rdf:first sg:person.01260234472.39
    63 rdf:rest rdf:nil
    64 N5d0b00f3495241c1add5d14e8892a8b8 schema:name readcube_id
    65 schema:value 798f63b9d33e8d6b0603c8f9339acad97495ecdc88f6a5b24673b1cd813b6616
    66 rdf:type schema:PropertyValue
    67 N6ea8d66f0ad44da48f703421562d3a81 schema:name Springer Nature - SN SciGraph project
    68 rdf:type schema:Organization
    69 N788e90c814484e6e83c8ca2727d4ed7e schema:affiliation https://www.grid.ac/institutes/grid.265465.6
    70 schema:familyName Moran
    71 schema:givenName A.L.
    72 rdf:type schema:Person
    73 Nae1a193c8adf49d2b6ebef1908843969 schema:issueNumber 5-6
    74 rdf:type schema:PublicationIssue
    75 Nbaa1fff7662c46b5bc4b7102493e33a9 rdf:first sg:person.010644720371.73
    76 rdf:rest N1b37212d26eb41ca93ea0cbfff255458
    77 Ne3ef372484b74454b2522204da013d03 schema:volumeNumber 16
    78 rdf:type schema:PublicationVolume
    79 Nf65cf1ab483c44c991dcedcd9e1ead1a schema:name dimensions_id
    80 schema:value pub.1025516147
    81 rdf:type schema:PropertyValue
    82 Nfd080a5e730f4fcc9bbb47e5901778c6 schema:name doi
    83 schema:value 10.1007/s11666-007-9099-3
    84 rdf:type schema:PropertyValue
    85 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    86 schema:name Engineering
    87 rdf:type schema:DefinedTerm
    88 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    89 schema:name Materials Engineering
    90 rdf:type schema:DefinedTerm
    91 sg:journal.1136229 schema:issn 1059-9630
    92 1544-1016
    93 schema:name Journal of Thermal Spray Technology
    94 rdf:type schema:Periodical
    95 sg:person.010644720371.73 schema:affiliation N05ad2e41e7a84c789d5162ac93116bec
    96 schema:familyName Kim
    97 schema:givenName G.E.
    98 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010644720371.73
    99 rdf:type schema:Person
    100 sg:person.01260234472.39 schema:affiliation https://www.grid.ac/institutes/grid.28046.38
    101 schema:familyName Jodoin
    102 schema:givenName B.
    103 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01260234472.39
    104 rdf:type schema:Person
    105 sg:person.01316101746.20 schema:affiliation https://www.grid.ac/institutes/grid.28046.38
    106 schema:familyName Sansoucy
    107 schema:givenName E.
    108 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01316101746.20
    109 rdf:type schema:Person
    110 sg:pub.10.1007/bf01401446 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008607047
    111 https://doi.org/10.1007/bf01401446
    112 rdf:type schema:CreativeWork
    113 sg:pub.10.1007/bf02822619 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039875531
    114 https://doi.org/10.1007/bf02822619
    115 rdf:type schema:CreativeWork
    116 sg:pub.10.1007/s10853-005-3169-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1008502927
    117 https://doi.org/10.1007/s10853-005-3169-z
    118 rdf:type schema:CreativeWork
    119 sg:pub.10.1007/s11661-005-0182-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039498242
    120 https://doi.org/10.1007/s11661-005-0182-4
    121 rdf:type schema:CreativeWork
    122 sg:pub.10.1361/105996300770349854 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002297902
    123 https://doi.org/10.1361/105996300770349854
    124 rdf:type schema:CreativeWork
    125 sg:pub.10.1361/105996302770348628 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040726265
    126 https://doi.org/10.1361/105996302770348628
    127 rdf:type schema:CreativeWork
    128 sg:pub.10.1361/10599630419427 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013645802
    129 https://doi.org/10.1361/10599630419427
    130 rdf:type schema:CreativeWork
    131 sg:pub.10.1361/105996306x107995 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001890732
    132 https://doi.org/10.1361/105996306x107995
    133 rdf:type schema:CreativeWork
    134 sg:pub.10.1361/105996306x146857 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039325750
    135 https://doi.org/10.1361/105996306x146857
    136 rdf:type schema:CreativeWork
    137 sg:pub.10.1361/105996398770350945 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043400429
    138 https://doi.org/10.1361/105996398770350945
    139 rdf:type schema:CreativeWork
    140 sg:pub.10.1361/105996399770350250 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020972880
    141 https://doi.org/10.1361/105996399770350250
    142 rdf:type schema:CreativeWork
    143 https://app.dimensions.ai/details/publication/pub.1106882027 schema:CreativeWork
    144 https://doi.org/10.1002/9781118520994 schema:sameAs https://app.dimensions.ai/details/publication/pub.1106882027
    145 rdf:type schema:CreativeWork
    146 https://doi.org/10.1002/adem.200500103 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040231296
    147 rdf:type schema:CreativeWork
    148 https://doi.org/10.1002/adem.200500227 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012464555
    149 rdf:type schema:CreativeWork
    150 https://doi.org/10.1016/0010-938x(79)90008-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051238711
    151 rdf:type schema:CreativeWork
    152 https://doi.org/10.1016/j.corsci.2005.04.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003440092
    153 rdf:type schema:CreativeWork
    154 https://doi.org/10.1016/j.matdes.2004.03.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048002911
    155 rdf:type schema:CreativeWork
    156 https://doi.org/10.1016/j.msea.2003.08.023 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002936137
    157 rdf:type schema:CreativeWork
    158 https://doi.org/10.1016/j.msea.2006.05.095 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004419124
    159 rdf:type schema:CreativeWork
    160 https://doi.org/10.1016/j.surfcoat.2005.09.022 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041784015
    161 rdf:type schema:CreativeWork
    162 https://doi.org/10.1016/s0013-4686(02)00830-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012153478
    163 rdf:type schema:CreativeWork
    164 https://doi.org/10.1016/s0040-6090(02)00631-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035282566
    165 rdf:type schema:CreativeWork
    166 https://doi.org/10.1016/s0257-8972(02)00018-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1036346971
    167 rdf:type schema:CreativeWork
    168 https://doi.org/10.1016/s0257-8972(97)00231-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007417006
    169 rdf:type schema:CreativeWork
    170 https://doi.org/10.1016/s1359-6454(03)00274-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1020725941
    171 rdf:type schema:CreativeWork
    172 https://doi.org/10.1016/s1359-6454(99)00300-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030352185
    173 rdf:type schema:CreativeWork
    174 https://doi.org/10.1149/1.1848261 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063188964
    175 rdf:type schema:CreativeWork
    176 https://doi.org/10.1149/1.1943588 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063189236
    177 rdf:type schema:CreativeWork
    178 https://www.grid.ac/institutes/grid.265465.6 schema:alternateName United States Naval Academy
    179 schema:name Department of Mechanical Engineering, United States Naval Academy, Annapolis, MD, USA
    180 rdf:type schema:Organization
    181 https://www.grid.ac/institutes/grid.28046.38 schema:alternateName University of Ottawa
    182 schema:name Department of Mechanical Engineering, University of Ottawa, Ottawa, Ontario, Canada
    183 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...