Improving Structure Integrity and Fatigue Properties of 316L Welded Joint by Water Jet Peening Treatment View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2022-07-25

AUTHORS

Yun Luo, Hong-Xiang Zheng, Wenchun Jiang, Yi Fang, Xu Zhao

ABSTRACT

Applying surface treatment on welded joints is an important method for improving the surface integrity and service life of welded structures under a cyclic load condition. Water jet peening (WJP) is a new surface strengthening technology with environmental and economic benefits. In this paper, the effects of WJP treatment on the microstructure, microhardness, residual stress, and tensile and fatigue properties of 316L stainless steel welded joints were investigated, and the effect of WJP pressure was discussed. Results show that under a WJP pressure of below 200 MPa, the microstructure was refined and the residual stresses in the surface layer were reduced from tensile stress to compressive stress, thereby enhancing the fatigue strength and fatigue life of the welded structure. The strengthening effect of WJP treatment in the high cycle regime is greater than that in the low cycle regime. In addition, the microhardness, surface roughness, and mechanical strength all increased as a result of the WJP treatment. The treatment also inhibited the initiation of cracks and reduced the crack propagation rate. The microhardness, compressive residual stress, and tensile strength all increased along with WJP pressure. An appropriate WJP pressure should be set because a too high WJP pressure can reduce its strengthening effect on welded structures due to surface erosion and damage. More... »

PAGES

1-16

References to SciGraph publications

  • 2012-02-21. Improving surface hardness of austenitic stainless steel using waterjet peening process in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 1984-06. A new finite element model for welding heat sources in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • 2012-09-26. Effect of waterjet peening on aluminum alloy 5005 in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11665-022-07155-y

    DOI

    http://dx.doi.org/10.1007/s11665-022-07155-y

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1149728299


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0905", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Civil Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), 266580, Qingdao, China", 
              "id": "http://www.grid.ac/institutes/grid.497420.c", 
              "name": [
                "College of New Energy, China University of Petroleum (East China), 266555, Qingdao, People\u2019s Republic of China", 
                "State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), 266580, Qingdao, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Luo", 
            "givenName": "Yun", 
            "id": "sg:person.012540023163.65", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012540023163.65"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "College of New Energy, China University of Petroleum (East China), 266555, Qingdao, People\u2019s Republic of China", 
              "id": "http://www.grid.ac/institutes/grid.497420.c", 
              "name": [
                "College of New Energy, China University of Petroleum (East China), 266555, Qingdao, People\u2019s Republic of China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zheng", 
            "givenName": "Hong-Xiang", 
            "id": "sg:person.016170744635.27", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016170744635.27"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), 266580, Qingdao, China", 
              "id": "http://www.grid.ac/institutes/grid.497420.c", 
              "name": [
                "College of New Energy, China University of Petroleum (East China), 266555, Qingdao, People\u2019s Republic of China", 
                "State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), 266580, Qingdao, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Jiang", 
            "givenName": "Wenchun", 
            "id": "sg:person.011273766641.21", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011273766641.21"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "College of New Energy, China University of Petroleum (East China), 266555, Qingdao, People\u2019s Republic of China", 
              "id": "http://www.grid.ac/institutes/grid.497420.c", 
              "name": [
                "College of New Energy, China University of Petroleum (East China), 266555, Qingdao, People\u2019s Republic of China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Fang", 
            "givenName": "Yi", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Tianhua Institute of Chemistry Machinery, 730000, Lanzhou, People\u2019s Republic of China", 
              "id": "http://www.grid.ac/institutes/None", 
              "name": [
                "Tianhua Institute of Chemistry Machinery, 730000, Lanzhou, People\u2019s Republic of China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zhao", 
            "givenName": "Xu", 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/bf02667333", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015516438", 
              "https://doi.org/10.1007/bf02667333"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-012-4522-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009739038", 
              "https://doi.org/10.1007/s00170-012-4522-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-012-3962-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036944310", 
              "https://doi.org/10.1007/s00170-012-3962-1"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2022-07-25", 
        "datePublishedReg": "2022-07-25", 
        "description": "Applying surface treatment on welded joints is an important method for improving the surface integrity and service life of welded structures under a cyclic load condition. Water jet peening (WJP) is a new surface strengthening technology with environmental and economic benefits. In this paper, the effects of WJP treatment on the microstructure, microhardness, residual stress, and tensile and fatigue properties of 316L stainless steel welded joints were investigated, and the effect of WJP pressure was discussed. Results show that under a WJP pressure of below 200\u00a0MPa, the microstructure was refined and the residual stresses in the surface layer were reduced from tensile stress to compressive stress, thereby enhancing the fatigue strength and fatigue life of the welded structure. The strengthening effect of WJP treatment in the high cycle regime is greater than that in the low cycle regime. In addition, the microhardness, surface roughness, and mechanical strength all increased as a result of the WJP treatment. The treatment also inhibited the initiation of cracks and reduced the crack propagation rate. The microhardness, compressive residual stress, and tensile strength all increased along with WJP pressure. An appropriate WJP pressure should be set because a too high WJP pressure can reduce its strengthening effect on welded structures due to surface erosion and damage.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/s11665-022-07155-y", 
        "isAccessibleForFree": false, 
        "isFundedItemOf": [
          {
            "id": "sg:grant.8935804", 
            "type": "MonetaryGrant"
          }, 
          {
            "id": "sg:grant.8935803", 
            "type": "MonetaryGrant"
          }
        ], 
        "isPartOf": [
          {
            "id": "sg:journal.1042007", 
            "issn": [
              "1059-9495", 
              "1544-1024"
            ], 
            "name": "Journal of Materials Engineering and Performance", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }
        ], 
        "keywords": [
          "water jet peening", 
          "residual stress", 
          "welded joints", 
          "welded structure", 
          "fatigue properties", 
          "cyclic load conditions", 
          "low cycle regime", 
          "high cycle regime", 
          "compressive residual stress", 
          "initiation of cracks", 
          "crack propagation rate", 
          "cycle regime", 
          "peening treatments", 
          "fatigue life", 
          "fatigue strength", 
          "stainless steel", 
          "surface integrity", 
          "service life", 
          "mechanical strength", 
          "tensile strength", 
          "load conditions", 
          "tensile stress", 
          "compressive stress", 
          "surface treatment", 
          "surface roughness", 
          "propagation rate", 
          "microhardness", 
          "surface layer", 
          "structure integrity", 
          "new surface", 
          "surface erosion", 
          "microstructure", 
          "strength", 
          "joints", 
          "peening", 
          "steel", 
          "cracks", 
          "economic benefits", 
          "MPa", 
          "roughness", 
          "stress", 
          "pressure", 
          "properties", 
          "important method", 
          "structure", 
          "layer", 
          "surface", 
          "regime", 
          "technology", 
          "effect", 
          "results", 
          "integrity", 
          "conditions", 
          "erosion", 
          "method", 
          "damage", 
          "addition", 
          "rate", 
          "life", 
          "initiation", 
          "benefits", 
          "treatment", 
          "paper"
        ], 
        "name": "Improving Structure Integrity and Fatigue Properties of 316L Welded Joint by Water Jet Peening Treatment", 
        "pagination": "1-16", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1149728299"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11665-022-07155-y"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11665-022-07155-y", 
          "https://app.dimensions.ai/details/publication/pub.1149728299"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-09-02T16:08", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20220902/entities/gbq_results/article/article_945.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/s11665-022-07155-y"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11665-022-07155-y'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11665-022-07155-y'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11665-022-07155-y'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11665-022-07155-y'


     

    This table displays all metadata directly associated to this object as RDF triples.

    165 TRIPLES      21 PREDICATES      89 URIs      77 LITERALS      4 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11665-022-07155-y schema:about anzsrc-for:09
    2 anzsrc-for:0905
    3 anzsrc-for:0912
    4 schema:author N5fb44b1965874b0dbce677a2feb7cc3a
    5 schema:citation sg:pub.10.1007/bf02667333
    6 sg:pub.10.1007/s00170-012-3962-1
    7 sg:pub.10.1007/s00170-012-4522-4
    8 schema:datePublished 2022-07-25
    9 schema:datePublishedReg 2022-07-25
    10 schema:description Applying surface treatment on welded joints is an important method for improving the surface integrity and service life of welded structures under a cyclic load condition. Water jet peening (WJP) is a new surface strengthening technology with environmental and economic benefits. In this paper, the effects of WJP treatment on the microstructure, microhardness, residual stress, and tensile and fatigue properties of 316L stainless steel welded joints were investigated, and the effect of WJP pressure was discussed. Results show that under a WJP pressure of below 200 MPa, the microstructure was refined and the residual stresses in the surface layer were reduced from tensile stress to compressive stress, thereby enhancing the fatigue strength and fatigue life of the welded structure. The strengthening effect of WJP treatment in the high cycle regime is greater than that in the low cycle regime. In addition, the microhardness, surface roughness, and mechanical strength all increased as a result of the WJP treatment. The treatment also inhibited the initiation of cracks and reduced the crack propagation rate. The microhardness, compressive residual stress, and tensile strength all increased along with WJP pressure. An appropriate WJP pressure should be set because a too high WJP pressure can reduce its strengthening effect on welded structures due to surface erosion and damage.
    11 schema:genre article
    12 schema:isAccessibleForFree false
    13 schema:isPartOf sg:journal.1042007
    14 schema:keywords MPa
    15 addition
    16 benefits
    17 compressive residual stress
    18 compressive stress
    19 conditions
    20 crack propagation rate
    21 cracks
    22 cycle regime
    23 cyclic load conditions
    24 damage
    25 economic benefits
    26 effect
    27 erosion
    28 fatigue life
    29 fatigue properties
    30 fatigue strength
    31 high cycle regime
    32 important method
    33 initiation
    34 initiation of cracks
    35 integrity
    36 joints
    37 layer
    38 life
    39 load conditions
    40 low cycle regime
    41 mechanical strength
    42 method
    43 microhardness
    44 microstructure
    45 new surface
    46 paper
    47 peening
    48 peening treatments
    49 pressure
    50 propagation rate
    51 properties
    52 rate
    53 regime
    54 residual stress
    55 results
    56 roughness
    57 service life
    58 stainless steel
    59 steel
    60 strength
    61 stress
    62 structure
    63 structure integrity
    64 surface
    65 surface erosion
    66 surface integrity
    67 surface layer
    68 surface roughness
    69 surface treatment
    70 technology
    71 tensile strength
    72 tensile stress
    73 treatment
    74 water jet peening
    75 welded joints
    76 welded structure
    77 schema:name Improving Structure Integrity and Fatigue Properties of 316L Welded Joint by Water Jet Peening Treatment
    78 schema:pagination 1-16
    79 schema:productId N8bb8f16f81d54805b829ac354bed3976
    80 Nf8c6cd5bae8b449c913e9744ee18a9f9
    81 schema:sameAs https://app.dimensions.ai/details/publication/pub.1149728299
    82 https://doi.org/10.1007/s11665-022-07155-y
    83 schema:sdDatePublished 2022-09-02T16:08
    84 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    85 schema:sdPublisher Nf1c9ac76d36f41018efc21213c463623
    86 schema:url https://doi.org/10.1007/s11665-022-07155-y
    87 sgo:license sg:explorer/license/
    88 sgo:sdDataset articles
    89 rdf:type schema:ScholarlyArticle
    90 N15c95b3db395496abc2713054fe8ad2f rdf:first sg:person.011273766641.21
    91 rdf:rest Nabd3ddf1242745518a8c20e07c95e2f2
    92 N2cc88102579a42d5b523437e837d7a55 rdf:first sg:person.016170744635.27
    93 rdf:rest N15c95b3db395496abc2713054fe8ad2f
    94 N5fb44b1965874b0dbce677a2feb7cc3a rdf:first sg:person.012540023163.65
    95 rdf:rest N2cc88102579a42d5b523437e837d7a55
    96 N68876b6cb4d64995b852d2cf602c4d42 schema:affiliation grid-institutes:None
    97 schema:familyName Zhao
    98 schema:givenName Xu
    99 rdf:type schema:Person
    100 N8bb8f16f81d54805b829ac354bed3976 schema:name dimensions_id
    101 schema:value pub.1149728299
    102 rdf:type schema:PropertyValue
    103 N999c310857324453bf7c1bf7948d2627 rdf:first N68876b6cb4d64995b852d2cf602c4d42
    104 rdf:rest rdf:nil
    105 Nabd3ddf1242745518a8c20e07c95e2f2 rdf:first Nd41f9bee9aa04af6937bd6405977204f
    106 rdf:rest N999c310857324453bf7c1bf7948d2627
    107 Nd41f9bee9aa04af6937bd6405977204f schema:affiliation grid-institutes:grid.497420.c
    108 schema:familyName Fang
    109 schema:givenName Yi
    110 rdf:type schema:Person
    111 Nf1c9ac76d36f41018efc21213c463623 schema:name Springer Nature - SN SciGraph project
    112 rdf:type schema:Organization
    113 Nf8c6cd5bae8b449c913e9744ee18a9f9 schema:name doi
    114 schema:value 10.1007/s11665-022-07155-y
    115 rdf:type schema:PropertyValue
    116 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    117 schema:name Engineering
    118 rdf:type schema:DefinedTerm
    119 anzsrc-for:0905 schema:inDefinedTermSet anzsrc-for:
    120 schema:name Civil Engineering
    121 rdf:type schema:DefinedTerm
    122 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    123 schema:name Materials Engineering
    124 rdf:type schema:DefinedTerm
    125 sg:grant.8935803 http://pending.schema.org/fundedItem sg:pub.10.1007/s11665-022-07155-y
    126 rdf:type schema:MonetaryGrant
    127 sg:grant.8935804 http://pending.schema.org/fundedItem sg:pub.10.1007/s11665-022-07155-y
    128 rdf:type schema:MonetaryGrant
    129 sg:journal.1042007 schema:issn 1059-9495
    130 1544-1024
    131 schema:name Journal of Materials Engineering and Performance
    132 schema:publisher Springer Nature
    133 rdf:type schema:Periodical
    134 sg:person.011273766641.21 schema:affiliation grid-institutes:grid.497420.c
    135 schema:familyName Jiang
    136 schema:givenName Wenchun
    137 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011273766641.21
    138 rdf:type schema:Person
    139 sg:person.012540023163.65 schema:affiliation grid-institutes:grid.497420.c
    140 schema:familyName Luo
    141 schema:givenName Yun
    142 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012540023163.65
    143 rdf:type schema:Person
    144 sg:person.016170744635.27 schema:affiliation grid-institutes:grid.497420.c
    145 schema:familyName Zheng
    146 schema:givenName Hong-Xiang
    147 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016170744635.27
    148 rdf:type schema:Person
    149 sg:pub.10.1007/bf02667333 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015516438
    150 https://doi.org/10.1007/bf02667333
    151 rdf:type schema:CreativeWork
    152 sg:pub.10.1007/s00170-012-3962-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036944310
    153 https://doi.org/10.1007/s00170-012-3962-1
    154 rdf:type schema:CreativeWork
    155 sg:pub.10.1007/s00170-012-4522-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009739038
    156 https://doi.org/10.1007/s00170-012-4522-4
    157 rdf:type schema:CreativeWork
    158 grid-institutes:None schema:alternateName Tianhua Institute of Chemistry Machinery, 730000, Lanzhou, People’s Republic of China
    159 schema:name Tianhua Institute of Chemistry Machinery, 730000, Lanzhou, People’s Republic of China
    160 rdf:type schema:Organization
    161 grid-institutes:grid.497420.c schema:alternateName College of New Energy, China University of Petroleum (East China), 266555, Qingdao, People’s Republic of China
    162 State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), 266580, Qingdao, China
    163 schema:name College of New Energy, China University of Petroleum (East China), 266555, Qingdao, People’s Republic of China
    164 State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), 266580, Qingdao, China
    165 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...