Riv-Bonding of Aluminum Alloys with High-Strength Steels against the Favorable Joining Direction View Full Text


Ontology type: schema:ScholarlyArticle      Open Access: True


Article Info

DATE

2022-03-07

AUTHORS

Josef Domitner, Peter Auer, Jennifer Stippich, Zahra Silvayeh, Sabrina Jessernig, Lukas Peiser, Florian Hönsch, Christof Sommitsch

ABSTRACT

In order to exploit the advantages offered by multi-material design, this work studies the feasibility of joining aluminum alloys with high-strength steels (HSS) against the favorable joining direction by using self-piercing riveting (SPR) combined with adhesive bonding, so-called riv-bonding. Therefore, riv-bonding of four joint configurations including different aluminum alloy sheets (AW-6014-PX, AW-6451-T4), HSS sheets (HC420LA, HC450X) and rivet types (C5.3×8.0-H4, U5.5×5.0-H6) was experimentally investigated. Moreover, riv-bonding of two joint configurations was exemplarily modeled using the Simufact Forming finite element (FE) software. The viscoelastic properties of the liquid adhesive layer between the sheets were substituted with “equivalent” elastoplastic properties to model the adhesive as solid with strain rate-dependent flow behavior. Good agreement of joint cross sections and force-displacement curves between experiments and simulations confirms that the presented numerical model of riv-bonding is suitable for predicting both the joinability of aluminum alloys with HSS and the final quality of hybrid joints. More... »

PAGES

6970-6979

References to SciGraph publications

  • 2011-06-10. Recent development in finite element analysis of self-piercing riveted joints in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-03-20. Self-piercing riveting-a review in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2020-06-23. Modeling the Failure Behavior of Self-Piercing Riveting Joints of 6xxx Aluminum Alloy in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2014-04-08. Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2020-08-02. Improvement of a rivet geometry for the self-piercing riveting of high-strength steel and multi-material joints in PRODUCTION ENGINEERING
  • 2018-01. Quality of self-piercing riveting (SPR) joints from cross-sectional perspective: A review in ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11665-022-06647-1

    DOI

    http://dx.doi.org/10.1007/s11665-022-06647-1

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1146097436


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria", 
              "id": "http://www.grid.ac/institutes/grid.410413.3", 
              "name": [
                "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Domitner", 
            "givenName": "Josef", 
            "id": "sg:person.013034541675.38", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013034541675.38"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria", 
              "id": "http://www.grid.ac/institutes/grid.410413.3", 
              "name": [
                "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Auer", 
            "givenName": "Peter", 
            "id": "sg:person.010211007377.90", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010211007377.90"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria", 
              "id": "http://www.grid.ac/institutes/grid.410413.3", 
              "name": [
                "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Stippich", 
            "givenName": "Jennifer", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria", 
              "id": "http://www.grid.ac/institutes/grid.410413.3", 
              "name": [
                "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Silvayeh", 
            "givenName": "Zahra", 
            "id": "sg:person.011750312135.35", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011750312135.35"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria", 
              "id": "http://www.grid.ac/institutes/grid.410413.3", 
              "name": [
                "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Jessernig", 
            "givenName": "Sabrina", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Magna Steyr Fahrzeugtechnik AG & Co KG, Liebenauer Hauptstra\u00dfe 317, 8041, Graz, Austria", 
              "id": "http://www.grid.ac/institutes/grid.425393.a", 
              "name": [
                "Magna Steyr Fahrzeugtechnik AG & Co KG, Liebenauer Hauptstra\u00dfe 317, 8041, Graz, Austria"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Peiser", 
            "givenName": "Lukas", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Magna Steyr Fahrzeugtechnik AG & Co KG, Liebenauer Hauptstra\u00dfe 317, 8041, Graz, Austria", 
              "id": "http://www.grid.ac/institutes/grid.425393.a", 
              "name": [
                "Magna Steyr Fahrzeugtechnik AG & Co KG, Liebenauer Hauptstra\u00dfe 317, 8041, Graz, Austria"
              ], 
              "type": "Organization"
            }, 
            "familyName": "H\u00f6nsch", 
            "givenName": "Florian", 
            "id": "sg:person.016173306160.66", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016173306160.66"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria", 
              "id": "http://www.grid.ac/institutes/grid.410413.3", 
              "name": [
                "Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Sommitsch", 
            "givenName": "Christof", 
            "id": "sg:person.010477425273.00", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010477425273.00"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/s00170-011-3414-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045939727", 
              "https://doi.org/10.1007/s00170-011-3414-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-014-0962-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004405551", 
              "https://doi.org/10.1007/s11665-014-0962-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1016/j.acme.2017.06.003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1090680210", 
              "https://doi.org/10.1016/j.acme.2017.06.003"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-020-04894-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1128713300", 
              "https://doi.org/10.1007/s11665-020-04894-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11740-020-00973-w", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1129830489", 
              "https://doi.org/10.1007/s11740-020-00973-w"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0156-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084694719", 
              "https://doi.org/10.1007/s00170-017-0156-x"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2022-03-07", 
        "datePublishedReg": "2022-03-07", 
        "description": "In order to exploit the advantages offered by multi-material design, this work studies the feasibility of joining aluminum alloys with high-strength steels (HSS) against the favorable joining direction\u00a0by using self-piercing riveting (SPR) combined with adhesive bonding, so-called riv-bonding. Therefore, riv-bonding of four joint configurations including different aluminum alloy sheets (AW-6014-PX, AW-6451-T4), HSS sheets (HC420LA, HC450X) and rivet types (C5.3\u00d78.0-H4, U5.5\u00d75.0-H6) was experimentally investigated. Moreover, riv-bonding of two joint configurations was exemplarily modeled using the Simufact Forming finite element (FE) software. The viscoelastic properties of the liquid adhesive layer between the sheets were substituted with \u201cequivalent\u201d elastoplastic properties to model the adhesive as solid with strain rate-dependent flow behavior. Good agreement of joint cross sections and force-displacement curves between experiments and simulations confirms that the presented numerical model of riv-bonding is suitable for predicting both the joinability of aluminum alloys with HSS and the final quality of hybrid joints.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/s11665-022-06647-1", 
        "isAccessibleForFree": true, 
        "isPartOf": [
          {
            "id": "sg:journal.1042007", 
            "issn": [
              "1059-9495", 
              "1544-1024"
            ], 
            "name": "Journal of Materials Engineering and Performance", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "9", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "31"
          }
        ], 
        "keywords": [
          "high strength steel", 
          "aluminum alloy", 
          "joint configuration", 
          "multi-material design", 
          "aluminum alloy sheet", 
          "finite element software", 
          "force-displacement curves", 
          "joint cross section", 
          "HSS sheets", 
          "rivet type", 
          "strength steel", 
          "alloy sheets", 
          "hybrid joints", 
          "adhesive layer", 
          "adhesive bonding", 
          "element software", 
          "elastoplastic properties", 
          "flow behavior", 
          "numerical model", 
          "viscoelastic properties", 
          "alloy", 
          "steel", 
          "final quality", 
          "good agreement", 
          "sheets", 
          "Simufact", 
          "configuration", 
          "joinability", 
          "properties", 
          "adhesives", 
          "layer", 
          "simulations", 
          "direction", 
          "joints", 
          "design", 
          "bonding", 
          "cross sections", 
          "feasibility", 
          "behavior", 
          "advantages", 
          "agreement", 
          "work", 
          "software", 
          "experiments", 
          "curves", 
          "order", 
          "model", 
          "sections", 
          "quality", 
          "types"
        ], 
        "name": "Riv-Bonding of Aluminum Alloys with High-Strength Steels against the Favorable Joining Direction", 
        "pagination": "6970-6979", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1146097436"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11665-022-06647-1"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11665-022-06647-1", 
          "https://app.dimensions.ai/details/publication/pub.1146097436"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-11-24T21:08", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20221124/entities/gbq_results/article/article_920.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/s11665-022-06647-1"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11665-022-06647-1'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11665-022-06647-1'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11665-022-06647-1'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11665-022-06647-1'


     

    This table displays all metadata directly associated to this object as RDF triples.

    180 TRIPLES      21 PREDICATES      80 URIs      66 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11665-022-06647-1 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author Ncb98b5dd6ace4532b3ff83c827a21d44
    4 schema:citation sg:pub.10.1007/s00170-011-3414-3
    5 sg:pub.10.1007/s00170-017-0156-x
    6 sg:pub.10.1007/s11665-014-0962-3
    7 sg:pub.10.1007/s11665-020-04894-8
    8 sg:pub.10.1007/s11740-020-00973-w
    9 sg:pub.10.1016/j.acme.2017.06.003
    10 schema:datePublished 2022-03-07
    11 schema:datePublishedReg 2022-03-07
    12 schema:description In order to exploit the advantages offered by multi-material design, this work studies the feasibility of joining aluminum alloys with high-strength steels (HSS) against the favorable joining direction by using self-piercing riveting (SPR) combined with adhesive bonding, so-called riv-bonding. Therefore, riv-bonding of four joint configurations including different aluminum alloy sheets (AW-6014-PX, AW-6451-T4), HSS sheets (HC420LA, HC450X) and rivet types (C5.3×8.0-H4, U5.5×5.0-H6) was experimentally investigated. Moreover, riv-bonding of two joint configurations was exemplarily modeled using the Simufact Forming finite element (FE) software. The viscoelastic properties of the liquid adhesive layer between the sheets were substituted with “equivalent” elastoplastic properties to model the adhesive as solid with strain rate-dependent flow behavior. Good agreement of joint cross sections and force-displacement curves between experiments and simulations confirms that the presented numerical model of riv-bonding is suitable for predicting both the joinability of aluminum alloys with HSS and the final quality of hybrid joints.
    13 schema:genre article
    14 schema:isAccessibleForFree true
    15 schema:isPartOf N037707bc7d9d470d8d4678769a815c49
    16 Naeba8a11f4be4aecbc391ea85110107f
    17 sg:journal.1042007
    18 schema:keywords HSS sheets
    19 Simufact
    20 adhesive bonding
    21 adhesive layer
    22 adhesives
    23 advantages
    24 agreement
    25 alloy
    26 alloy sheets
    27 aluminum alloy
    28 aluminum alloy sheet
    29 behavior
    30 bonding
    31 configuration
    32 cross sections
    33 curves
    34 design
    35 direction
    36 elastoplastic properties
    37 element software
    38 experiments
    39 feasibility
    40 final quality
    41 finite element software
    42 flow behavior
    43 force-displacement curves
    44 good agreement
    45 high strength steel
    46 hybrid joints
    47 joinability
    48 joint configuration
    49 joint cross section
    50 joints
    51 layer
    52 model
    53 multi-material design
    54 numerical model
    55 order
    56 properties
    57 quality
    58 rivet type
    59 sections
    60 sheets
    61 simulations
    62 software
    63 steel
    64 strength steel
    65 types
    66 viscoelastic properties
    67 work
    68 schema:name Riv-Bonding of Aluminum Alloys with High-Strength Steels against the Favorable Joining Direction
    69 schema:pagination 6970-6979
    70 schema:productId N48b239d6edd5468a98e38e88f4a62e8e
    71 N960aa4045897401eacbb8ee2e4361a41
    72 schema:sameAs https://app.dimensions.ai/details/publication/pub.1146097436
    73 https://doi.org/10.1007/s11665-022-06647-1
    74 schema:sdDatePublished 2022-11-24T21:08
    75 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    76 schema:sdPublisher Nf27ec82b268140d1a142ec7510ef72a4
    77 schema:url https://doi.org/10.1007/s11665-022-06647-1
    78 sgo:license sg:explorer/license/
    79 sgo:sdDataset articles
    80 rdf:type schema:ScholarlyArticle
    81 N037707bc7d9d470d8d4678769a815c49 schema:volumeNumber 31
    82 rdf:type schema:PublicationVolume
    83 N1e17b72ca7454819b5d7f189d43ba2bf rdf:first sg:person.010211007377.90
    84 rdf:rest N993adf6c326b4b508fa4b1e0a74eadb1
    85 N48b239d6edd5468a98e38e88f4a62e8e schema:name doi
    86 schema:value 10.1007/s11665-022-06647-1
    87 rdf:type schema:PropertyValue
    88 N63a846f0a69d4312ad2a4e775fed6f9c rdf:first Nf2f18319810c4d959fe5d8d2d312af5b
    89 rdf:rest Nd8d4d60953da4f7f8ffbf58a104ce06e
    90 N6d50f3d666a84e4db66d535a48d4a46b rdf:first sg:person.011750312135.35
    91 rdf:rest Nb3f6b7020560418b8d5c0daec5958f03
    92 N78a8ac6011fd4d72a89fcead6f09a877 schema:affiliation grid-institutes:grid.410413.3
    93 schema:familyName Stippich
    94 schema:givenName Jennifer
    95 rdf:type schema:Person
    96 N8315eba950cb4fe2ac31ff47447eb95b schema:affiliation grid-institutes:grid.410413.3
    97 schema:familyName Jessernig
    98 schema:givenName Sabrina
    99 rdf:type schema:Person
    100 N8cad870822a14173977cc3121a088ff4 rdf:first sg:person.010477425273.00
    101 rdf:rest rdf:nil
    102 N960aa4045897401eacbb8ee2e4361a41 schema:name dimensions_id
    103 schema:value pub.1146097436
    104 rdf:type schema:PropertyValue
    105 N993adf6c326b4b508fa4b1e0a74eadb1 rdf:first N78a8ac6011fd4d72a89fcead6f09a877
    106 rdf:rest N6d50f3d666a84e4db66d535a48d4a46b
    107 Naeba8a11f4be4aecbc391ea85110107f schema:issueNumber 9
    108 rdf:type schema:PublicationIssue
    109 Nb3f6b7020560418b8d5c0daec5958f03 rdf:first N8315eba950cb4fe2ac31ff47447eb95b
    110 rdf:rest N63a846f0a69d4312ad2a4e775fed6f9c
    111 Ncb98b5dd6ace4532b3ff83c827a21d44 rdf:first sg:person.013034541675.38
    112 rdf:rest N1e17b72ca7454819b5d7f189d43ba2bf
    113 Nd8d4d60953da4f7f8ffbf58a104ce06e rdf:first sg:person.016173306160.66
    114 rdf:rest N8cad870822a14173977cc3121a088ff4
    115 Nf27ec82b268140d1a142ec7510ef72a4 schema:name Springer Nature - SN SciGraph project
    116 rdf:type schema:Organization
    117 Nf2f18319810c4d959fe5d8d2d312af5b schema:affiliation grid-institutes:grid.425393.a
    118 schema:familyName Peiser
    119 schema:givenName Lukas
    120 rdf:type schema:Person
    121 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    122 schema:name Engineering
    123 rdf:type schema:DefinedTerm
    124 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    125 schema:name Materials Engineering
    126 rdf:type schema:DefinedTerm
    127 sg:journal.1042007 schema:issn 1059-9495
    128 1544-1024
    129 schema:name Journal of Materials Engineering and Performance
    130 schema:publisher Springer Nature
    131 rdf:type schema:Periodical
    132 sg:person.010211007377.90 schema:affiliation grid-institutes:grid.410413.3
    133 schema:familyName Auer
    134 schema:givenName Peter
    135 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010211007377.90
    136 rdf:type schema:Person
    137 sg:person.010477425273.00 schema:affiliation grid-institutes:grid.410413.3
    138 schema:familyName Sommitsch
    139 schema:givenName Christof
    140 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010477425273.00
    141 rdf:type schema:Person
    142 sg:person.011750312135.35 schema:affiliation grid-institutes:grid.410413.3
    143 schema:familyName Silvayeh
    144 schema:givenName Zahra
    145 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011750312135.35
    146 rdf:type schema:Person
    147 sg:person.013034541675.38 schema:affiliation grid-institutes:grid.410413.3
    148 schema:familyName Domitner
    149 schema:givenName Josef
    150 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013034541675.38
    151 rdf:type schema:Person
    152 sg:person.016173306160.66 schema:affiliation grid-institutes:grid.425393.a
    153 schema:familyName Hönsch
    154 schema:givenName Florian
    155 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016173306160.66
    156 rdf:type schema:Person
    157 sg:pub.10.1007/s00170-011-3414-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045939727
    158 https://doi.org/10.1007/s00170-011-3414-3
    159 rdf:type schema:CreativeWork
    160 sg:pub.10.1007/s00170-017-0156-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1084694719
    161 https://doi.org/10.1007/s00170-017-0156-x
    162 rdf:type schema:CreativeWork
    163 sg:pub.10.1007/s11665-014-0962-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004405551
    164 https://doi.org/10.1007/s11665-014-0962-3
    165 rdf:type schema:CreativeWork
    166 sg:pub.10.1007/s11665-020-04894-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1128713300
    167 https://doi.org/10.1007/s11665-020-04894-8
    168 rdf:type schema:CreativeWork
    169 sg:pub.10.1007/s11740-020-00973-w schema:sameAs https://app.dimensions.ai/details/publication/pub.1129830489
    170 https://doi.org/10.1007/s11740-020-00973-w
    171 rdf:type schema:CreativeWork
    172 sg:pub.10.1016/j.acme.2017.06.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1090680210
    173 https://doi.org/10.1016/j.acme.2017.06.003
    174 rdf:type schema:CreativeWork
    175 grid-institutes:grid.410413.3 schema:alternateName Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria
    176 schema:name Graz University of Technology, Institute of Materials Science, Joining and Forming, Research Group of Lightweight and Forming Technologies, Inffeldgasse 11/I, 8010, Graz, Austria
    177 rdf:type schema:Organization
    178 grid-institutes:grid.425393.a schema:alternateName Magna Steyr Fahrzeugtechnik AG & Co KG, Liebenauer Hauptstraße 317, 8041, Graz, Austria
    179 schema:name Magna Steyr Fahrzeugtechnik AG & Co KG, Liebenauer Hauptstraße 317, 8041, Graz, Austria
    180 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...