Thermal Treatment, Sliding Wear and Saline Corrosion of Al In Situ Reinforced with Mg2Si and Ex Situ Reinforced with TiC ... View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2018-02-05

AUTHORS

A. G. Lekatou, A. Poulia, H. Mavros, A. E. Karantzalis

ABSTRACT

The main objective of this work is to produce a composite consisting of (a) a cast heat-treatable Al-Mg-Si alloy with high contents of Mg for corrosion resistance and Si to offset the Mg-due poor castability (in situ hypoeutectic Mg2Si/Al composite) and (b) TiC particles at high enough volume fractions (≤ 15%), in order to achieve a satisfactory combination of wear and corrosion performance. TiCp/Al-7Mg-5Si (wt.%) composites were produced by flux-assisted casting followed by solution and aging heat treatment. Solution treatment led to a relatively uniform dispersion and shape rounding of Mg2Si precipitates and Si particles. TiC particle addition resulted in refinement of primary Al, modification of the Mg2Si Chinese script morphology and refinement/spheroidization of primary Mg2Si. Heat treatment combined with TiC addition notably improved the sliding wear resistance of Al-7Mg-5Si. A wear mechanism has been proposed. The TiC/Al interfaces remained intact of corrosion during potentiodynamic polarization of the heat-treated materials in 3.5 wt.% NaCl. Different main forms of localized corrosion in 3.5 wt.% NaCl were identified for each TiC content (0, 5, 15 vol.%), depending on specific degradation favoring microstructural features (topology/size/interface wetting) at each composition. More... »

PAGES

5030-5039

References to SciGraph publications

  • 2010-03-27. Solidification Observations of Dendritic Cast Al Alloys Reinforced with TiC Particles in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2014-01-18. Abrasive Wear Behavior of In Situ TiC Reinforced with Al-4.5%Cu Matrix in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2017-09-06. Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2013-04-26. The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15 pct Mg2Si Composite in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-04-25. Microstructure and dry sliding wear behavior of cast Al–Mg2Si in-situ metal matrix composite modified by Nd in RARE METALS
  • 1999-05. Microstructural refinement in Al–Mg2Si in situ composites in JOURNAL OF MATERIALS SCIENCE LETTERS
  • 2012-01. Anodic oxidation of alloys in the (α-Al–Mg2Si) quasibinary section of the Al–Mg–Si ternary system in 3% NaCl solution and principle of independence of electrochemical reactions in POWDER METALLURGY AND METAL CERAMICS
  • 2017-03-21. Microstructure Characterization, Mechanical, and Tribological Properties of Slow-Cooled Sb-Treated Al-20Mg2Si-Cu In Situ Composites in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 1984-02. The Al-Si (Aluminum-Silicon) system in BULLETIN OF ALLOY PHASE DIAGRAMS
  • 2009-06-24. Modification of Cast Al-Mg2Si Metal Matrix Composite by Li in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • 2009-07-14. Microstructural Observations in a Cast Al-Si-Cu/TiC Composite in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2010-04-30. Casting-Based Production of Al-TiC-AlB2 Composite Material Through the Use of KBF4 Salt in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2016-12-19. Improvement in Tensile and Wear Properties of As-Cast Al–15%Mg2Si Composite Modified by Zn and Ni in INTERNATIONAL JOURNAL OF METALCASTING
  • 2014-02-22. Mechanical and Tribological Characterization of Al-Mg2Si Composites After Yttrium Addition and Heat Treatment in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2015-02-21. Aluminum-Based Cast In Situ Composites: A Review in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2005-10-25. Corrosion behaviour of aluminium metal matrix composites reinforced with TiC processed by pressureless melt infiltration in JOURNAL OF APPLIED ELECTROCHEMISTRY
  • 2009-12-09. Solidification behaviour of ceramic particle reinforced Al-alloy matrices in JOURNAL OF MATERIALS SCIENCE
  • 2012-08-11. Development of a Cast Al-Mg2Si-Si In Situ Composite: Microstructure, Heat Treatment, and Mechanical Properties in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11665-018-3213-1

    DOI

    http://dx.doi.org/10.1007/s11665-018-3213-1

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1100828793


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece", 
              "id": "http://www.grid.ac/institutes/grid.9594.1", 
              "name": [
                "Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Lekatou", 
            "givenName": "A. G.", 
            "id": "sg:person.010546326615.06", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010546326615.06"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece", 
              "id": "http://www.grid.ac/institutes/grid.9594.1", 
              "name": [
                "Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Poulia", 
            "givenName": "A.", 
            "id": "sg:person.016512312602.91", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016512312602.91"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece", 
              "id": "http://www.grid.ac/institutes/grid.9594.1", 
              "name": [
                "Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Mavros", 
            "givenName": "H.", 
            "id": "sg:person.010400341351.31", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010400341351.31"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece", 
              "id": "http://www.grid.ac/institutes/grid.9594.1", 
              "name": [
                "Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Karantzalis", 
            "givenName": "A. E.", 
            "id": "sg:person.015763045402.38", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015763045402.38"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/s11665-017-2901-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1091498419", 
              "https://doi.org/10.1007/s11665-017-2901-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02868729", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039755537", 
              "https://doi.org/10.1007/bf02868729"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-013-0836-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016105776", 
              "https://doi.org/10.1007/s11665-013-0836-0"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11106-012-9371-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047314422", 
              "https://doi.org/10.1007/s11106-012-9371-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11663-009-9251-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043182608", 
              "https://doi.org/10.1007/s11663-009-9251-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-009-4055-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037410644", 
              "https://doi.org/10.1007/s10853-009-4055-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1023/a:1006684916145", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036778819", 
              "https://doi.org/10.1023/a:1006684916145"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s40962-016-0125-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009374212", 
              "https://doi.org/10.1007/s40962-016-0125-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s12598-013-0030-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041055979", 
              "https://doi.org/10.1007/s12598-013-0030-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-012-0337-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1026932272", 
              "https://doi.org/10.1007/s11665-012-0337-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10800-005-9073-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038773911", 
              "https://doi.org/10.1007/s10800-005-9073-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-015-1424-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006791355", 
              "https://doi.org/10.1007/s11665-015-1424-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-014-0900-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1026095029", 
              "https://doi.org/10.1007/s11665-014-0900-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-010-9636-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018456078", 
              "https://doi.org/10.1007/s11665-010-9636-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-017-2624-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084032495", 
              "https://doi.org/10.1007/s11665-017-2624-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-009-9505-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043234094", 
              "https://doi.org/10.1007/s11665-009-9505-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-013-1747-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010414515", 
              "https://doi.org/10.1007/s11661-013-1747-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-010-9668-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050266420", 
              "https://doi.org/10.1007/s11665-010-9668-3"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2018-02-05", 
        "datePublishedReg": "2018-02-05", 
        "description": "The main objective of this work is to produce a composite consisting of (a) a cast heat-treatable Al-Mg-Si alloy with high contents of Mg for corrosion resistance and Si to offset the Mg-due poor castability (in situ hypoeutectic Mg2Si/Al composite) and (b) TiC particles at high enough volume fractions (\u2264\u00a015%), in order to achieve a satisfactory combination of wear and corrosion performance. TiCp/Al-7Mg-5Si (wt.%) composites were produced by flux-assisted casting followed by solution and aging heat treatment. Solution treatment led to a relatively uniform dispersion and shape rounding of Mg2Si precipitates and Si particles. TiC particle addition resulted in refinement of primary Al, modification of the Mg2Si Chinese script morphology and refinement/spheroidization of primary Mg2Si. Heat treatment combined with TiC addition notably improved the sliding wear resistance of Al-7Mg-5Si. A wear mechanism has been proposed. The TiC/Al interfaces remained intact of corrosion during potentiodynamic polarization of the heat-treated materials in 3.5\u00a0wt.% NaCl. Different main forms of localized corrosion in 3.5\u00a0wt.% NaCl were identified for each TiC content (0, 5, 15\u00a0vol.%), depending on specific degradation favoring microstructural features (topology/size/interface wetting) at each composition.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/s11665-018-3213-1", 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1042007", 
            "issn": [
              "1059-9495", 
              "1544-1024"
            ], 
            "name": "Journal of Materials Engineering and Performance", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "10", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "27"
          }
        ], 
        "keywords": [
          "heat-treatable Al\u2013Mg", 
          "heat treatment", 
          "Chinese script morphology", 
          "TiC particle addition", 
          "heat-treated materials", 
          "Al\u20137Mg", 
          "saline corrosion", 
          "Mg2Si precipitates", 
          "wear resistance", 
          "wear mechanism", 
          "corrosion resistance", 
          "corrosion performance", 
          "Sliding Wear", 
          "TiC particles", 
          "TiC addition", 
          "poor castability", 
          "TiC content", 
          "localized corrosion", 
          "particle addition", 
          "Al-Mg", 
          "composite consisting", 
          "solution treatment", 
          "primary Mg2Si", 
          "Al interface", 
          "microstructural features", 
          "uniform dispersion", 
          "primary Al", 
          "potentiodynamic polarization", 
          "volume fraction", 
          "corrosion", 
          "thermal treatment", 
          "high enough volume fractions", 
          "Reinforced", 
          "Mg2Si", 
          "Si", 
          "wear", 
          "satisfactory combination", 
          "spheroidization", 
          "castability", 
          "wt", 
          "composites", 
          "casting", 
          "main objective", 
          "precipitates", 
          "high content", 
          "TiC", 
          "resistance", 
          "interface", 
          "particles", 
          "materials", 
          "dispersion", 
          "performance", 
          "morphology", 
          "degradation", 
          "polarization", 
          "content", 
          "solution", 
          "Mg", 
          "consisting", 
          "addition", 
          "refinement", 
          "al", 
          "work", 
          "NaCl", 
          "order", 
          "composition", 
          "fraction", 
          "modification", 
          "main forms", 
          "combination", 
          "rounding", 
          "features", 
          "mechanism", 
          "objective", 
          "form", 
          "treatment", 
          "specific degradation"
        ], 
        "name": "Thermal Treatment, Sliding Wear and Saline Corrosion of Al In Situ Reinforced with Mg2Si and Ex Situ Reinforced with TiC Particles", 
        "pagination": "5030-5039", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1100828793"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11665-018-3213-1"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11665-018-3213-1", 
          "https://app.dimensions.ai/details/publication/pub.1100828793"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-09-02T16:02", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20220902/entities/gbq_results/article/article_768.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/s11665-018-3213-1"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11665-018-3213-1'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11665-018-3213-1'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11665-018-3213-1'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11665-018-3213-1'


     

    This table displays all metadata directly associated to this object as RDF triples.

    227 TRIPLES      21 PREDICATES      119 URIs      93 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11665-018-3213-1 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N5b3e9e25d93f47f394ba5f90e7f99d1b
    4 schema:citation sg:pub.10.1007/bf02868729
    5 sg:pub.10.1007/s10800-005-9073-z
    6 sg:pub.10.1007/s10853-009-4055-x
    7 sg:pub.10.1007/s11106-012-9371-z
    8 sg:pub.10.1007/s11661-013-1747-2
    9 sg:pub.10.1007/s11663-009-9251-1
    10 sg:pub.10.1007/s11665-009-9505-8
    11 sg:pub.10.1007/s11665-010-9636-y
    12 sg:pub.10.1007/s11665-010-9668-3
    13 sg:pub.10.1007/s11665-012-0337-6
    14 sg:pub.10.1007/s11665-013-0836-0
    15 sg:pub.10.1007/s11665-014-0900-4
    16 sg:pub.10.1007/s11665-015-1424-2
    17 sg:pub.10.1007/s11665-017-2624-8
    18 sg:pub.10.1007/s11665-017-2901-6
    19 sg:pub.10.1007/s12598-013-0030-4
    20 sg:pub.10.1007/s40962-016-0125-4
    21 sg:pub.10.1023/a:1006684916145
    22 schema:datePublished 2018-02-05
    23 schema:datePublishedReg 2018-02-05
    24 schema:description The main objective of this work is to produce a composite consisting of (a) a cast heat-treatable Al-Mg-Si alloy with high contents of Mg for corrosion resistance and Si to offset the Mg-due poor castability (in situ hypoeutectic Mg2Si/Al composite) and (b) TiC particles at high enough volume fractions (≤ 15%), in order to achieve a satisfactory combination of wear and corrosion performance. TiCp/Al-7Mg-5Si (wt.%) composites were produced by flux-assisted casting followed by solution and aging heat treatment. Solution treatment led to a relatively uniform dispersion and shape rounding of Mg2Si precipitates and Si particles. TiC particle addition resulted in refinement of primary Al, modification of the Mg2Si Chinese script morphology and refinement/spheroidization of primary Mg2Si. Heat treatment combined with TiC addition notably improved the sliding wear resistance of Al-7Mg-5Si. A wear mechanism has been proposed. The TiC/Al interfaces remained intact of corrosion during potentiodynamic polarization of the heat-treated materials in 3.5 wt.% NaCl. Different main forms of localized corrosion in 3.5 wt.% NaCl were identified for each TiC content (0, 5, 15 vol.%), depending on specific degradation favoring microstructural features (topology/size/interface wetting) at each composition.
    25 schema:genre article
    26 schema:isAccessibleForFree false
    27 schema:isPartOf N1ba2649625b04b8583787b9ae7798834
    28 N8c25fd79af1e4805b6e207a97ada3e12
    29 sg:journal.1042007
    30 schema:keywords Al interface
    31 Al-Mg
    32 Al–7Mg
    33 Chinese script morphology
    34 Mg
    35 Mg2Si
    36 Mg2Si precipitates
    37 NaCl
    38 Reinforced
    39 Si
    40 Sliding Wear
    41 TiC
    42 TiC addition
    43 TiC content
    44 TiC particle addition
    45 TiC particles
    46 addition
    47 al
    48 castability
    49 casting
    50 combination
    51 composite consisting
    52 composites
    53 composition
    54 consisting
    55 content
    56 corrosion
    57 corrosion performance
    58 corrosion resistance
    59 degradation
    60 dispersion
    61 features
    62 form
    63 fraction
    64 heat treatment
    65 heat-treatable Al–Mg
    66 heat-treated materials
    67 high content
    68 high enough volume fractions
    69 interface
    70 localized corrosion
    71 main forms
    72 main objective
    73 materials
    74 mechanism
    75 microstructural features
    76 modification
    77 morphology
    78 objective
    79 order
    80 particle addition
    81 particles
    82 performance
    83 polarization
    84 poor castability
    85 potentiodynamic polarization
    86 precipitates
    87 primary Al
    88 primary Mg2Si
    89 refinement
    90 resistance
    91 rounding
    92 saline corrosion
    93 satisfactory combination
    94 solution
    95 solution treatment
    96 specific degradation
    97 spheroidization
    98 thermal treatment
    99 treatment
    100 uniform dispersion
    101 volume fraction
    102 wear
    103 wear mechanism
    104 wear resistance
    105 work
    106 wt
    107 schema:name Thermal Treatment, Sliding Wear and Saline Corrosion of Al In Situ Reinforced with Mg2Si and Ex Situ Reinforced with TiC Particles
    108 schema:pagination 5030-5039
    109 schema:productId Ne2575208ff414c27a2fb4793d492b9fb
    110 Nf936e18bd3ee4c41bf95ea0479e66617
    111 schema:sameAs https://app.dimensions.ai/details/publication/pub.1100828793
    112 https://doi.org/10.1007/s11665-018-3213-1
    113 schema:sdDatePublished 2022-09-02T16:02
    114 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    115 schema:sdPublisher N3830226aa8b54f89adfef530a2023ba1
    116 schema:url https://doi.org/10.1007/s11665-018-3213-1
    117 sgo:license sg:explorer/license/
    118 sgo:sdDataset articles
    119 rdf:type schema:ScholarlyArticle
    120 N0d84c6b9e5e24462a0e4e9d186896908 rdf:first sg:person.016512312602.91
    121 rdf:rest Nd135b548028d492bb7c24a589afc74ad
    122 N1ba2649625b04b8583787b9ae7798834 schema:volumeNumber 27
    123 rdf:type schema:PublicationVolume
    124 N3830226aa8b54f89adfef530a2023ba1 schema:name Springer Nature - SN SciGraph project
    125 rdf:type schema:Organization
    126 N4c284640e3d34199b12523da16259db6 rdf:first sg:person.015763045402.38
    127 rdf:rest rdf:nil
    128 N5b3e9e25d93f47f394ba5f90e7f99d1b rdf:first sg:person.010546326615.06
    129 rdf:rest N0d84c6b9e5e24462a0e4e9d186896908
    130 N8c25fd79af1e4805b6e207a97ada3e12 schema:issueNumber 10
    131 rdf:type schema:PublicationIssue
    132 Nd135b548028d492bb7c24a589afc74ad rdf:first sg:person.010400341351.31
    133 rdf:rest N4c284640e3d34199b12523da16259db6
    134 Ne2575208ff414c27a2fb4793d492b9fb schema:name dimensions_id
    135 schema:value pub.1100828793
    136 rdf:type schema:PropertyValue
    137 Nf936e18bd3ee4c41bf95ea0479e66617 schema:name doi
    138 schema:value 10.1007/s11665-018-3213-1
    139 rdf:type schema:PropertyValue
    140 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    141 schema:name Engineering
    142 rdf:type schema:DefinedTerm
    143 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    144 schema:name Materials Engineering
    145 rdf:type schema:DefinedTerm
    146 sg:journal.1042007 schema:issn 1059-9495
    147 1544-1024
    148 schema:name Journal of Materials Engineering and Performance
    149 schema:publisher Springer Nature
    150 rdf:type schema:Periodical
    151 sg:person.010400341351.31 schema:affiliation grid-institutes:grid.9594.1
    152 schema:familyName Mavros
    153 schema:givenName H.
    154 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010400341351.31
    155 rdf:type schema:Person
    156 sg:person.010546326615.06 schema:affiliation grid-institutes:grid.9594.1
    157 schema:familyName Lekatou
    158 schema:givenName A. G.
    159 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010546326615.06
    160 rdf:type schema:Person
    161 sg:person.015763045402.38 schema:affiliation grid-institutes:grid.9594.1
    162 schema:familyName Karantzalis
    163 schema:givenName A. E.
    164 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015763045402.38
    165 rdf:type schema:Person
    166 sg:person.016512312602.91 schema:affiliation grid-institutes:grid.9594.1
    167 schema:familyName Poulia
    168 schema:givenName A.
    169 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016512312602.91
    170 rdf:type schema:Person
    171 sg:pub.10.1007/bf02868729 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039755537
    172 https://doi.org/10.1007/bf02868729
    173 rdf:type schema:CreativeWork
    174 sg:pub.10.1007/s10800-005-9073-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1038773911
    175 https://doi.org/10.1007/s10800-005-9073-z
    176 rdf:type schema:CreativeWork
    177 sg:pub.10.1007/s10853-009-4055-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1037410644
    178 https://doi.org/10.1007/s10853-009-4055-x
    179 rdf:type schema:CreativeWork
    180 sg:pub.10.1007/s11106-012-9371-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1047314422
    181 https://doi.org/10.1007/s11106-012-9371-z
    182 rdf:type schema:CreativeWork
    183 sg:pub.10.1007/s11661-013-1747-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010414515
    184 https://doi.org/10.1007/s11661-013-1747-2
    185 rdf:type schema:CreativeWork
    186 sg:pub.10.1007/s11663-009-9251-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043182608
    187 https://doi.org/10.1007/s11663-009-9251-1
    188 rdf:type schema:CreativeWork
    189 sg:pub.10.1007/s11665-009-9505-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043234094
    190 https://doi.org/10.1007/s11665-009-9505-8
    191 rdf:type schema:CreativeWork
    192 sg:pub.10.1007/s11665-010-9636-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1018456078
    193 https://doi.org/10.1007/s11665-010-9636-y
    194 rdf:type schema:CreativeWork
    195 sg:pub.10.1007/s11665-010-9668-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050266420
    196 https://doi.org/10.1007/s11665-010-9668-3
    197 rdf:type schema:CreativeWork
    198 sg:pub.10.1007/s11665-012-0337-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026932272
    199 https://doi.org/10.1007/s11665-012-0337-6
    200 rdf:type schema:CreativeWork
    201 sg:pub.10.1007/s11665-013-0836-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016105776
    202 https://doi.org/10.1007/s11665-013-0836-0
    203 rdf:type schema:CreativeWork
    204 sg:pub.10.1007/s11665-014-0900-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026095029
    205 https://doi.org/10.1007/s11665-014-0900-4
    206 rdf:type schema:CreativeWork
    207 sg:pub.10.1007/s11665-015-1424-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006791355
    208 https://doi.org/10.1007/s11665-015-1424-2
    209 rdf:type schema:CreativeWork
    210 sg:pub.10.1007/s11665-017-2624-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084032495
    211 https://doi.org/10.1007/s11665-017-2624-8
    212 rdf:type schema:CreativeWork
    213 sg:pub.10.1007/s11665-017-2901-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091498419
    214 https://doi.org/10.1007/s11665-017-2901-6
    215 rdf:type schema:CreativeWork
    216 sg:pub.10.1007/s12598-013-0030-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041055979
    217 https://doi.org/10.1007/s12598-013-0030-4
    218 rdf:type schema:CreativeWork
    219 sg:pub.10.1007/s40962-016-0125-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009374212
    220 https://doi.org/10.1007/s40962-016-0125-4
    221 rdf:type schema:CreativeWork
    222 sg:pub.10.1023/a:1006684916145 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036778819
    223 https://doi.org/10.1023/a:1006684916145
    224 rdf:type schema:CreativeWork
    225 grid-institutes:grid.9594.1 schema:alternateName Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece
    226 schema:name Department of Materials Science and Engineering, University of Ioannina, 45110, Ioannina, Greece
    227 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...