Review of the Shearing Process for Sheet Steels and Its Effect on Sheared-Edge Stretching View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2012-07

AUTHORS

B. S. Levy, C. J. Van Tyne

ABSTRACT

Failure in sheared-edge stretching often limits the use of advanced high-strength steel sheets in automotive applications. The present study analyzes data in the literature from laboratory experiments on both the shearing process and the characteristics of sheared edges. Shearing produces a surface with regions of rollover, burnish, fracture, and burr. The effect of clearance and tensile strength on the shear face characteristics is quantified. Higher strength, lower ductility steels exhibit an increase in percent fracture region. The shearing process also creates a zone of deformation adjacent to the shear face called the shear-affected zone (SAZ). From an analysis of data in the literature, it is concluded that deformation in the SAZ is the dominant factor in controlling failure during sheared-edge stretching. The characteristics of the shear face are generally important for failures during sheared-edge stretching only as there is a correlation between the characteristics of the shear face and the characteristics of the SAZ. The effect of the shear burr on shear-edge stretching is also related to a correlation with the characteristics of the SAZ. In reviewing the literature, many shearing variables that could affect sheared-edge stretching limits are not identified or if identified, not quantified. It is likely that some of these variables could affect subsequent sheared-edge stretching limits. More... »

PAGES

1205-1213

References to SciGraph publications

  • 1987. Simulation of sheared edge behaviour in stretch flanging by a modified Fukui test in ADVANCED TECHNOLOGY OF PLASTICITY 1987
  • 2006-12. Hole expansion in a variety of sheet steels in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2008-12. Failure During Sheared Edge Stretching in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 1983-01. Edge cracking in high strength steels in JOURNAL OF APPLIED METALWORKING
  • 1986-01. Sheared edge extension of high-strength cold-rolled steels in JOURNAL OF APPLIED METALWORKING
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11665-011-9997-x

    DOI

    http://dx.doi.org/10.1007/s11665-011-9997-x

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1036596412


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "name": [
                "B.S. Levy Consultants Ltd, 1700 E. 56th St., Suite 3705, 60637, Chicago, IL, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Levy", 
            "givenName": "B. S.", 
            "id": "sg:person.07631244432.33", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07631244432.33"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Colorado School of Mines", 
              "id": "https://www.grid.ac/institutes/grid.254549.b", 
              "name": [
                "Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Van Tyne", 
            "givenName": "C. J.", 
            "id": "sg:person.07741770136.12", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07741770136.12"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/bf02834379", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006180487", 
              "https://doi.org/10.1007/bf02834379"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02834379", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006180487", 
              "https://doi.org/10.1007/bf02834379"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-008-9218-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1032603816", 
              "https://doi.org/10.1007/s11665-008-9218-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105994906x150830", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033687754", 
              "https://doi.org/10.1361/105994906x150830"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02833914", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044149910", 
              "https://doi.org/10.1007/bf02833914"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02833914", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044149910", 
              "https://doi.org/10.1007/bf02833914"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1504/ijmpt.2003.003465", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1067477776"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-3-662-11046-1_2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1089752153", 
              "https://doi.org/10.1007/978-3-662-11046-1_2"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2012-07", 
        "datePublishedReg": "2012-07-01", 
        "description": "Failure in sheared-edge stretching often limits the use of advanced high-strength steel sheets in automotive applications. The present study analyzes data in the literature from laboratory experiments on both the shearing process and the characteristics of sheared edges. Shearing produces a surface with regions of rollover, burnish, fracture, and burr. The effect of clearance and tensile strength on the shear face characteristics is quantified. Higher strength, lower ductility steels exhibit an increase in percent fracture region. The shearing process also creates a zone of deformation adjacent to the shear face called the shear-affected zone (SAZ). From an analysis of data in the literature, it is concluded that deformation in the SAZ is the dominant factor in controlling failure during sheared-edge stretching. The characteristics of the shear face are generally important for failures during sheared-edge stretching only as there is a correlation between the characteristics of the shear face and the characteristics of the SAZ. The effect of the shear burr on shear-edge stretching is also related to a correlation with the characteristics of the SAZ. In reviewing the literature, many shearing variables that could affect sheared-edge stretching limits are not identified or if identified, not quantified. It is likely that some of these variables could affect subsequent sheared-edge stretching limits.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s11665-011-9997-x", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1042007", 
            "issn": [
              "1059-9495", 
              "1544-1024"
            ], 
            "name": "Journal of Materials Engineering and Performance", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "7", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "21"
          }
        ], 
        "name": "Review of the Shearing Process for Sheet Steels and Its Effect on Sheared-Edge Stretching", 
        "pagination": "1205-1213", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "ae54f7086cd0e7e4fc68eb2338e9e481f29f2ad5bc4fab9ebb2501b6419ad457"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11665-011-9997-x"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1036596412"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11665-011-9997-x", 
          "https://app.dimensions.ai/details/publication/pub.1036596412"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-10T13:20", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8659_00000523.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1007%2Fs11665-011-9997-x"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11665-011-9997-x'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11665-011-9997-x'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11665-011-9997-x'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11665-011-9997-x'


     

    This table displays all metadata directly associated to this object as RDF triples.

    93 TRIPLES      21 PREDICATES      33 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11665-011-9997-x schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N9f9a8b439fbf4f2797d25f92c6989598
    4 schema:citation sg:pub.10.1007/978-3-662-11046-1_2
    5 sg:pub.10.1007/bf02833914
    6 sg:pub.10.1007/bf02834379
    7 sg:pub.10.1007/s11665-008-9218-4
    8 sg:pub.10.1361/105994906x150830
    9 https://doi.org/10.1504/ijmpt.2003.003465
    10 schema:datePublished 2012-07
    11 schema:datePublishedReg 2012-07-01
    12 schema:description Failure in sheared-edge stretching often limits the use of advanced high-strength steel sheets in automotive applications. The present study analyzes data in the literature from laboratory experiments on both the shearing process and the characteristics of sheared edges. Shearing produces a surface with regions of rollover, burnish, fracture, and burr. The effect of clearance and tensile strength on the shear face characteristics is quantified. Higher strength, lower ductility steels exhibit an increase in percent fracture region. The shearing process also creates a zone of deformation adjacent to the shear face called the shear-affected zone (SAZ). From an analysis of data in the literature, it is concluded that deformation in the SAZ is the dominant factor in controlling failure during sheared-edge stretching. The characteristics of the shear face are generally important for failures during sheared-edge stretching only as there is a correlation between the characteristics of the shear face and the characteristics of the SAZ. The effect of the shear burr on shear-edge stretching is also related to a correlation with the characteristics of the SAZ. In reviewing the literature, many shearing variables that could affect sheared-edge stretching limits are not identified or if identified, not quantified. It is likely that some of these variables could affect subsequent sheared-edge stretching limits.
    13 schema:genre research_article
    14 schema:inLanguage en
    15 schema:isAccessibleForFree false
    16 schema:isPartOf N22563faff34347ae9630d15ac3e6fc4f
    17 Ne41d58b9e59f41fca6747e664d176dd3
    18 sg:journal.1042007
    19 schema:name Review of the Shearing Process for Sheet Steels and Its Effect on Sheared-Edge Stretching
    20 schema:pagination 1205-1213
    21 schema:productId Nf40f9b974a464daaa0ee1953bc4889d3
    22 Nf565c25ae15a47efa5b2181d68a73ec3
    23 Nffa2387d7a394642a7548befc4c1b1fa
    24 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036596412
    25 https://doi.org/10.1007/s11665-011-9997-x
    26 schema:sdDatePublished 2019-04-10T13:20
    27 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    28 schema:sdPublisher N8a80bf99b21d4564b9efbe7669eafc26
    29 schema:url http://link.springer.com/10.1007%2Fs11665-011-9997-x
    30 sgo:license sg:explorer/license/
    31 sgo:sdDataset articles
    32 rdf:type schema:ScholarlyArticle
    33 N22563faff34347ae9630d15ac3e6fc4f schema:issueNumber 7
    34 rdf:type schema:PublicationIssue
    35 N438db116e70546bca8029586b22aac20 rdf:first sg:person.07741770136.12
    36 rdf:rest rdf:nil
    37 N8a80bf99b21d4564b9efbe7669eafc26 schema:name Springer Nature - SN SciGraph project
    38 rdf:type schema:Organization
    39 N9713e6997657453283d3365a5132f056 schema:name B.S. Levy Consultants Ltd, 1700 E. 56th St., Suite 3705, 60637, Chicago, IL, USA
    40 rdf:type schema:Organization
    41 N9f9a8b439fbf4f2797d25f92c6989598 rdf:first sg:person.07631244432.33
    42 rdf:rest N438db116e70546bca8029586b22aac20
    43 Ne41d58b9e59f41fca6747e664d176dd3 schema:volumeNumber 21
    44 rdf:type schema:PublicationVolume
    45 Nf40f9b974a464daaa0ee1953bc4889d3 schema:name doi
    46 schema:value 10.1007/s11665-011-9997-x
    47 rdf:type schema:PropertyValue
    48 Nf565c25ae15a47efa5b2181d68a73ec3 schema:name dimensions_id
    49 schema:value pub.1036596412
    50 rdf:type schema:PropertyValue
    51 Nffa2387d7a394642a7548befc4c1b1fa schema:name readcube_id
    52 schema:value ae54f7086cd0e7e4fc68eb2338e9e481f29f2ad5bc4fab9ebb2501b6419ad457
    53 rdf:type schema:PropertyValue
    54 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    55 schema:name Engineering
    56 rdf:type schema:DefinedTerm
    57 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    58 schema:name Materials Engineering
    59 rdf:type schema:DefinedTerm
    60 sg:journal.1042007 schema:issn 1059-9495
    61 1544-1024
    62 schema:name Journal of Materials Engineering and Performance
    63 rdf:type schema:Periodical
    64 sg:person.07631244432.33 schema:affiliation N9713e6997657453283d3365a5132f056
    65 schema:familyName Levy
    66 schema:givenName B. S.
    67 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07631244432.33
    68 rdf:type schema:Person
    69 sg:person.07741770136.12 schema:affiliation https://www.grid.ac/institutes/grid.254549.b
    70 schema:familyName Van Tyne
    71 schema:givenName C. J.
    72 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07741770136.12
    73 rdf:type schema:Person
    74 sg:pub.10.1007/978-3-662-11046-1_2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1089752153
    75 https://doi.org/10.1007/978-3-662-11046-1_2
    76 rdf:type schema:CreativeWork
    77 sg:pub.10.1007/bf02833914 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044149910
    78 https://doi.org/10.1007/bf02833914
    79 rdf:type schema:CreativeWork
    80 sg:pub.10.1007/bf02834379 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006180487
    81 https://doi.org/10.1007/bf02834379
    82 rdf:type schema:CreativeWork
    83 sg:pub.10.1007/s11665-008-9218-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032603816
    84 https://doi.org/10.1007/s11665-008-9218-4
    85 rdf:type schema:CreativeWork
    86 sg:pub.10.1361/105994906x150830 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033687754
    87 https://doi.org/10.1361/105994906x150830
    88 rdf:type schema:CreativeWork
    89 https://doi.org/10.1504/ijmpt.2003.003465 schema:sameAs https://app.dimensions.ai/details/publication/pub.1067477776
    90 rdf:type schema:CreativeWork
    91 https://www.grid.ac/institutes/grid.254549.b schema:alternateName Colorado School of Mines
    92 schema:name Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA
    93 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...