Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD) View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2012-07

AUTHORS

Bernd Baufeld

ABSTRACT

INCONEL 718 parts have been manufactured by shaped metal deposition (SMD), an additive layer manufacturing technique applying wire-based tungsten inert gas welding. This technique is aimed toward mass customization of parts, omitting time- and scrap-intensive, subtractive fabrication routes. SMD results in dense, “near net-shaped” parts without pores, cracks, or fissures. The microstructure of the SMD parts exhibit large, columnar grains with a fine dendritic microstructure. The interdendritic boundaries are decorated by small Laves phase precipitates and by MC carbides. Tensile tests were performed with different strain rates (10−4, 10−3, and 2 × 10−3 1/s), but no dependency on strength or strain at failure was observed. The ultimate tensile strength was 828 ± 8 MPa, the true plastic strain at failure 28 ± 2%, the micro Vickers hardness 266 ± 21 HV200, and the dynamically measured Young’s module was 154 ± 1 GPa. More... »

PAGES

1416-1421

References to SciGraph publications

  • 2009-04. An Algorithm for Inverse Modeling of Layer-by-Layer Deposition Processes in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2009-10. Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718 in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1993-01. Elastic moduli and internal frictions of Inconel 718 and Ti-6Al-4V as a function of temperature in JOURNAL OF MATERIALS SCIENCE LETTERS
  • 1989-10. INCONEL 718: A solidification diagram in METALLURGICAL TRANSACTIONS A
  • 2011-02. Thermal Modeling of Direct Digital Melt-Deposition Processes in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2010-08. Texture and Crystal Orientation in Ti-6Al-4V Builds Fabricated by Shaped Metal Deposition in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2002-08. Carbide formation in alloy 718 during electron-beam solid freeform fabrication in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11665-011-0009-y

    DOI

    http://dx.doi.org/10.1007/s11665-011-0009-y

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1034834794


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0910", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Manufacturing Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "University of Sheffield", 
              "id": "https://www.grid.ac/institutes/grid.11835.3e", 
              "name": [
                "Nuclear Advanced Manufacturing Research Centre, University of Sheffield, Brunel Way, S60 5WG, Rotherham, UK"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Baufeld", 
            "givenName": "Bernd", 
            "id": "sg:person.012601116517.84", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012601116517.84"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/bf02650300", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000754948", 
              "https://doi.org/10.1007/bf02650300"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02650300", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000754948", 
              "https://doi.org/10.1007/bf02650300"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmatprotec.2007.10.051", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007810332"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-009-9949-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008411727", 
              "https://doi.org/10.1007/s11661-009-9949-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-009-9949-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008411727", 
              "https://doi.org/10.1007/s11661-009-9949-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1088/1468-6996/10/1/015008", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008716819"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jallcom.2010.12.014", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1011993311"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msea.2007.05.079", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016307881"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-010-9659-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017886981", 
              "https://doi.org/10.1007/s11665-010-9659-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-002-0376-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025858170", 
              "https://doi.org/10.1007/s11661-002-0376-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-002-0376-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025858170", 
              "https://doi.org/10.1007/s11661-002-0376-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00420541", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027083801", 
              "https://doi.org/10.1007/bf00420541"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00420541", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027083801", 
              "https://doi.org/10.1007/bf00420541"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmatprotec.2005.05.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027358724"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-010-0255-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027439644", 
              "https://doi.org/10.1007/s11661-010-0255-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-010-0255-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027439644", 
              "https://doi.org/10.1007/s11661-010-0255-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2355/isijinternational.49.1588", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033729321"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2355/isijinternational.49.1588", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033729321"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/mst.1996.12.11.963", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1034957971"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2006.05.024", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041969741"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11665-008-9268-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042230192", 
              "https://doi.org/10.1007/s11665-008-9268-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2009.11.032", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050339407"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1063/1.1148422", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1057676787"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.3139/146.110217", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1071031318"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://app.dimensions.ai/details/publication/pub.1101845190", 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2012-07", 
        "datePublishedReg": "2012-07-01", 
        "description": "INCONEL 718 parts have been manufactured by shaped metal deposition (SMD), an additive layer manufacturing technique applying wire-based tungsten inert gas welding. This technique is aimed toward mass customization of parts, omitting time- and scrap-intensive, subtractive fabrication routes. SMD results in dense, \u201cnear net-shaped\u201d parts without pores, cracks, or fissures. The microstructure of the SMD parts exhibit large, columnar grains with a fine dendritic microstructure. The interdendritic boundaries are decorated by small Laves phase precipitates and by MC carbides. Tensile tests were performed with different strain rates (10\u22124, 10\u22123, and 2 \u00d7 10\u22123 1/s), but no dependency on strength or strain at failure was observed. The ultimate tensile strength was 828 \u00b1 8 MPa, the true plastic strain at failure 28 \u00b1 2%, the micro Vickers hardness 266 \u00b1 21 HV200, and the dynamically measured Young\u2019s module was 154 \u00b1 1 GPa.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s11665-011-0009-y", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1042007", 
            "issn": [
              "1059-9495", 
              "1544-1024"
            ], 
            "name": "Journal of Materials Engineering and Performance", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "7", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "21"
          }
        ], 
        "name": "Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD)", 
        "pagination": "1416-1421", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "a5f05dbf48a569eb4a5424c48933218b934cf7229767ceda2a0aeb0555acc4b9"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11665-011-0009-y"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1034834794"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11665-011-0009-y", 
          "https://app.dimensions.ai/details/publication/pub.1034834794"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-10T20:09", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8681_00000590.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1007%2Fs11665-011-0009-y"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11665-011-0009-y'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11665-011-0009-y'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11665-011-0009-y'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11665-011-0009-y'


     

    This table displays all metadata directly associated to this object as RDF triples.

    124 TRIPLES      21 PREDICATES      46 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11665-011-0009-y schema:about anzsrc-for:09
    2 anzsrc-for:0910
    3 schema:author Nd058b65ddc384fd299b2a3927b811e4c
    4 schema:citation sg:pub.10.1007/bf00420541
    5 sg:pub.10.1007/bf02650300
    6 sg:pub.10.1007/s11661-002-0376-y
    7 sg:pub.10.1007/s11661-009-9949-3
    8 sg:pub.10.1007/s11661-010-0255-x
    9 sg:pub.10.1007/s11665-008-9268-7
    10 sg:pub.10.1007/s11665-010-9659-4
    11 https://app.dimensions.ai/details/publication/pub.1101845190
    12 https://doi.org/10.1016/j.jallcom.2010.12.014
    13 https://doi.org/10.1016/j.jmatprotec.2005.05.005
    14 https://doi.org/10.1016/j.jmatprotec.2007.10.051
    15 https://doi.org/10.1016/j.matdes.2006.05.024
    16 https://doi.org/10.1016/j.matdes.2009.11.032
    17 https://doi.org/10.1016/j.msea.2007.05.079
    18 https://doi.org/10.1063/1.1148422
    19 https://doi.org/10.1088/1468-6996/10/1/015008
    20 https://doi.org/10.1179/mst.1996.12.11.963
    21 https://doi.org/10.2355/isijinternational.49.1588
    22 https://doi.org/10.3139/146.110217
    23 schema:datePublished 2012-07
    24 schema:datePublishedReg 2012-07-01
    25 schema:description INCONEL 718 parts have been manufactured by shaped metal deposition (SMD), an additive layer manufacturing technique applying wire-based tungsten inert gas welding. This technique is aimed toward mass customization of parts, omitting time- and scrap-intensive, subtractive fabrication routes. SMD results in dense, “near net-shaped” parts without pores, cracks, or fissures. The microstructure of the SMD parts exhibit large, columnar grains with a fine dendritic microstructure. The interdendritic boundaries are decorated by small Laves phase precipitates and by MC carbides. Tensile tests were performed with different strain rates (10−4, 10−3, and 2 × 10−3 1/s), but no dependency on strength or strain at failure was observed. The ultimate tensile strength was 828 ± 8 MPa, the true plastic strain at failure 28 ± 2%, the micro Vickers hardness 266 ± 21 HV200, and the dynamically measured Young’s module was 154 ± 1 GPa.
    26 schema:genre research_article
    27 schema:inLanguage en
    28 schema:isAccessibleForFree false
    29 schema:isPartOf N247751aa379c40f5ad15fa73f4abfc89
    30 Nd0ca05cc512e47d0a19afd977a269bf4
    31 sg:journal.1042007
    32 schema:name Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD)
    33 schema:pagination 1416-1421
    34 schema:productId N30d19b59663c478281aa5a6a6cced909
    35 N7480d9979b0f46918c32ec9c5fd8708a
    36 Nc4b67f9a8c074822800d35997efe2734
    37 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034834794
    38 https://doi.org/10.1007/s11665-011-0009-y
    39 schema:sdDatePublished 2019-04-10T20:09
    40 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    41 schema:sdPublisher Nb82ce2a9d15d411a90a6d0ac26ca0e6e
    42 schema:url http://link.springer.com/10.1007%2Fs11665-011-0009-y
    43 sgo:license sg:explorer/license/
    44 sgo:sdDataset articles
    45 rdf:type schema:ScholarlyArticle
    46 N247751aa379c40f5ad15fa73f4abfc89 schema:volumeNumber 21
    47 rdf:type schema:PublicationVolume
    48 N30d19b59663c478281aa5a6a6cced909 schema:name doi
    49 schema:value 10.1007/s11665-011-0009-y
    50 rdf:type schema:PropertyValue
    51 N7480d9979b0f46918c32ec9c5fd8708a schema:name dimensions_id
    52 schema:value pub.1034834794
    53 rdf:type schema:PropertyValue
    54 Nb82ce2a9d15d411a90a6d0ac26ca0e6e schema:name Springer Nature - SN SciGraph project
    55 rdf:type schema:Organization
    56 Nc4b67f9a8c074822800d35997efe2734 schema:name readcube_id
    57 schema:value a5f05dbf48a569eb4a5424c48933218b934cf7229767ceda2a0aeb0555acc4b9
    58 rdf:type schema:PropertyValue
    59 Nd058b65ddc384fd299b2a3927b811e4c rdf:first sg:person.012601116517.84
    60 rdf:rest rdf:nil
    61 Nd0ca05cc512e47d0a19afd977a269bf4 schema:issueNumber 7
    62 rdf:type schema:PublicationIssue
    63 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    64 schema:name Engineering
    65 rdf:type schema:DefinedTerm
    66 anzsrc-for:0910 schema:inDefinedTermSet anzsrc-for:
    67 schema:name Manufacturing Engineering
    68 rdf:type schema:DefinedTerm
    69 sg:journal.1042007 schema:issn 1059-9495
    70 1544-1024
    71 schema:name Journal of Materials Engineering and Performance
    72 rdf:type schema:Periodical
    73 sg:person.012601116517.84 schema:affiliation https://www.grid.ac/institutes/grid.11835.3e
    74 schema:familyName Baufeld
    75 schema:givenName Bernd
    76 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012601116517.84
    77 rdf:type schema:Person
    78 sg:pub.10.1007/bf00420541 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027083801
    79 https://doi.org/10.1007/bf00420541
    80 rdf:type schema:CreativeWork
    81 sg:pub.10.1007/bf02650300 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000754948
    82 https://doi.org/10.1007/bf02650300
    83 rdf:type schema:CreativeWork
    84 sg:pub.10.1007/s11661-002-0376-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1025858170
    85 https://doi.org/10.1007/s11661-002-0376-y
    86 rdf:type schema:CreativeWork
    87 sg:pub.10.1007/s11661-009-9949-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008411727
    88 https://doi.org/10.1007/s11661-009-9949-3
    89 rdf:type schema:CreativeWork
    90 sg:pub.10.1007/s11661-010-0255-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1027439644
    91 https://doi.org/10.1007/s11661-010-0255-x
    92 rdf:type schema:CreativeWork
    93 sg:pub.10.1007/s11665-008-9268-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042230192
    94 https://doi.org/10.1007/s11665-008-9268-7
    95 rdf:type schema:CreativeWork
    96 sg:pub.10.1007/s11665-010-9659-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017886981
    97 https://doi.org/10.1007/s11665-010-9659-4
    98 rdf:type schema:CreativeWork
    99 https://app.dimensions.ai/details/publication/pub.1101845190 schema:CreativeWork
    100 https://doi.org/10.1016/j.jallcom.2010.12.014 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011993311
    101 rdf:type schema:CreativeWork
    102 https://doi.org/10.1016/j.jmatprotec.2005.05.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027358724
    103 rdf:type schema:CreativeWork
    104 https://doi.org/10.1016/j.jmatprotec.2007.10.051 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007810332
    105 rdf:type schema:CreativeWork
    106 https://doi.org/10.1016/j.matdes.2006.05.024 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041969741
    107 rdf:type schema:CreativeWork
    108 https://doi.org/10.1016/j.matdes.2009.11.032 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050339407
    109 rdf:type schema:CreativeWork
    110 https://doi.org/10.1016/j.msea.2007.05.079 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016307881
    111 rdf:type schema:CreativeWork
    112 https://doi.org/10.1063/1.1148422 schema:sameAs https://app.dimensions.ai/details/publication/pub.1057676787
    113 rdf:type schema:CreativeWork
    114 https://doi.org/10.1088/1468-6996/10/1/015008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008716819
    115 rdf:type schema:CreativeWork
    116 https://doi.org/10.1179/mst.1996.12.11.963 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034957971
    117 rdf:type schema:CreativeWork
    118 https://doi.org/10.2355/isijinternational.49.1588 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033729321
    119 rdf:type schema:CreativeWork
    120 https://doi.org/10.3139/146.110217 schema:sameAs https://app.dimensions.ai/details/publication/pub.1071031318
    121 rdf:type schema:CreativeWork
    122 https://www.grid.ac/institutes/grid.11835.3e schema:alternateName University of Sheffield
    123 schema:name Nuclear Advanced Manufacturing Research Centre, University of Sheffield, Brunel Way, S60 5WG, Rotherham, UK
    124 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...