An Investigation of Strain Concentration in High-Strength Al-Zn-Mg-Cu Alloy 7085 Subjected to Tensile Deformation View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2009-08-11

AUTHORS

C. C. Menzemer, D. F. Lam, T. S. Srivatsan

ABSTRACT

The strain concentration factors were determined for aluminum alloy 7085 in the T7651 temper using multi-hole structural coupon specimens. Samples of the alloy were evaluated for both the 6.25 mm (0.25 in.) thick and 10 mm (0.4 in.) thick specimens having widths of 50 mm (2 in.) and 100 mm (4 in.), respectively. For the case of the specimens that were 50 mm in width, the mechanical tests were conducted for both the open-hole and filled-hole conditions and the corresponding strain concentration value was determined. For the filled-hole test specimens, threaded fasteners having collars were used. In order to provide for some interference, the fasteners had a shank diameter that was slightly larger than the nominal hole size. The strain concentration values were evaluated at both the failure strain (εf) and the strain at maximum load (εmax). The average strain concentration value was then used to predict the results for the stack-up tests. More... »

PAGES

705-713

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s11665-009-9524-5

DOI

http://dx.doi.org/10.1007/s11665-009-9524-5

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1003589927


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Department of Civil Engineering, University of Akron, 44324, Akron, OH, USA", 
          "id": "http://www.grid.ac/institutes/grid.265881.0", 
          "name": [
            "Department of Civil Engineering, University of Akron, 44324, Akron, OH, USA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Menzemer", 
        "givenName": "C. C.", 
        "id": "sg:person.012042350145.91", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012042350145.91"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Department of Civil Engineering, University of Akron, 44324, Akron, OH, USA", 
          "id": "http://www.grid.ac/institutes/grid.265881.0", 
          "name": [
            "Department of Civil Engineering, University of Akron, 44324, Akron, OH, USA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Lam", 
        "givenName": "D. F.", 
        "id": "sg:person.015406231623.73", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015406231623.73"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Department of Mechanical Engineering, University of Akron, 44324, Akron, OH, USA", 
          "id": "http://www.grid.ac/institutes/grid.265881.0", 
          "name": [
            "Department of Mechanical Engineering, University of Akron, 44324, Akron, OH, USA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Srivatsan", 
        "givenName": "T. S.", 
        "id": "sg:person.015440524245.80", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015440524245.80"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/s11661-008-9703-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1008597862", 
          "https://doi.org/10.1007/s11661-008-9703-2"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf00354237", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036473679", 
          "https://doi.org/10.1007/bf00354237"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf01166019", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1006669349", 
          "https://doi.org/10.1007/bf01166019"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2009-08-11", 
    "datePublishedReg": "2009-08-11", 
    "description": "The strain concentration factors were determined for aluminum alloy 7085 in the T7651 temper using multi-hole structural coupon specimens. Samples of the alloy were evaluated for both the 6.25\u00a0mm (0.25 in.) thick and 10\u00a0mm (0.4 in.) thick specimens having widths of 50\u00a0mm (2 in.) and 100\u00a0mm (4 in.), respectively. For the case of the specimens that were 50\u00a0mm in width, the mechanical tests were conducted for both the open-hole and filled-hole conditions and the corresponding strain concentration value was determined. For the filled-hole test specimens, threaded fasteners having collars were used. In order to provide for some interference, the fasteners had a shank diameter that was slightly larger than the nominal hole size. The strain concentration values were evaluated at both the failure strain (\u03b5f) and the strain at maximum load (\u03b5max). The average strain concentration value was then used to predict the results for the stack-up tests.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/s11665-009-9524-5", 
    "inLanguage": "en", 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1042007", 
        "issn": [
          "1059-9495", 
          "1544-1024"
        ], 
        "name": "Journal of Materials Engineering and Performance", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "5", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "19"
      }
    ], 
    "keywords": [
      "high-strength Al", 
      "strain concentration factors", 
      "T7651 temper", 
      "failure strain", 
      "coupon specimens", 
      "mechanical tests", 
      "strain concentration", 
      "tensile deformation", 
      "test specimens", 
      "maximum load", 
      "Zn-Mg", 
      "nominal hole size", 
      "shank diameter", 
      "concentration factor", 
      "fasteners", 
      "hole size", 
      "concentration values", 
      "alloy", 
      "deformation", 
      "specimens", 
      "load", 
      "width", 
      "temper", 
      "stack", 
      "test", 
      "strains", 
      "diameter", 
      "factors", 
      "cases", 
      "values", 
      "conditions", 
      "collar", 
      "investigation", 
      "al", 
      "concentration", 
      "order", 
      "size", 
      "samples", 
      "interference", 
      "results", 
      "aluminum alloy 7085", 
      "alloy 7085", 
      "multi-hole structural coupon specimens", 
      "structural coupon specimens", 
      "filled-hole conditions", 
      "strain concentration value", 
      "filled-hole test specimens", 
      "average strain concentration value", 
      "Cu Alloy 7085"
    ], 
    "name": "An Investigation of Strain Concentration in High-Strength Al-Zn-Mg-Cu Alloy 7085 Subjected to Tensile Deformation", 
    "pagination": "705-713", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1003589927"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s11665-009-9524-5"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s11665-009-9524-5", 
      "https://app.dimensions.ai/details/publication/pub.1003589927"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2021-11-01T18:12", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20211101/entities/gbq_results/article/article_479.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/s11665-009-9524-5"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11665-009-9524-5'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11665-009-9524-5'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11665-009-9524-5'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11665-009-9524-5'


 

This table displays all metadata directly associated to this object as RDF triples.

135 TRIPLES      22 PREDICATES      77 URIs      66 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s11665-009-9524-5 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author N05b34e38f70843aeb29493305d82b861
4 schema:citation sg:pub.10.1007/bf00354237
5 sg:pub.10.1007/bf01166019
6 sg:pub.10.1007/s11661-008-9703-2
7 schema:datePublished 2009-08-11
8 schema:datePublishedReg 2009-08-11
9 schema:description The strain concentration factors were determined for aluminum alloy 7085 in the T7651 temper using multi-hole structural coupon specimens. Samples of the alloy were evaluated for both the 6.25 mm (0.25 in.) thick and 10 mm (0.4 in.) thick specimens having widths of 50 mm (2 in.) and 100 mm (4 in.), respectively. For the case of the specimens that were 50 mm in width, the mechanical tests were conducted for both the open-hole and filled-hole conditions and the corresponding strain concentration value was determined. For the filled-hole test specimens, threaded fasteners having collars were used. In order to provide for some interference, the fasteners had a shank diameter that was slightly larger than the nominal hole size. The strain concentration values were evaluated at both the failure strain (εf) and the strain at maximum load (εmax). The average strain concentration value was then used to predict the results for the stack-up tests.
10 schema:genre article
11 schema:inLanguage en
12 schema:isAccessibleForFree false
13 schema:isPartOf N10b12f0825bb447b88e25b8a4601b2e1
14 N18efec1003ac46558f95393705bfb3e8
15 sg:journal.1042007
16 schema:keywords Cu Alloy 7085
17 T7651 temper
18 Zn-Mg
19 al
20 alloy
21 alloy 7085
22 aluminum alloy 7085
23 average strain concentration value
24 cases
25 collar
26 concentration
27 concentration factor
28 concentration values
29 conditions
30 coupon specimens
31 deformation
32 diameter
33 factors
34 failure strain
35 fasteners
36 filled-hole conditions
37 filled-hole test specimens
38 high-strength Al
39 hole size
40 interference
41 investigation
42 load
43 maximum load
44 mechanical tests
45 multi-hole structural coupon specimens
46 nominal hole size
47 order
48 results
49 samples
50 shank diameter
51 size
52 specimens
53 stack
54 strain concentration
55 strain concentration factors
56 strain concentration value
57 strains
58 structural coupon specimens
59 temper
60 tensile deformation
61 test
62 test specimens
63 values
64 width
65 schema:name An Investigation of Strain Concentration in High-Strength Al-Zn-Mg-Cu Alloy 7085 Subjected to Tensile Deformation
66 schema:pagination 705-713
67 schema:productId N44103f79986f4161b78dd1b63652d96b
68 N8943f7de6c0a46ce8226af9e931bc1f4
69 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003589927
70 https://doi.org/10.1007/s11665-009-9524-5
71 schema:sdDatePublished 2021-11-01T18:12
72 schema:sdLicense https://scigraph.springernature.com/explorer/license/
73 schema:sdPublisher N79ae6d7cf31e45c8b40eec378355810f
74 schema:url https://doi.org/10.1007/s11665-009-9524-5
75 sgo:license sg:explorer/license/
76 sgo:sdDataset articles
77 rdf:type schema:ScholarlyArticle
78 N05b34e38f70843aeb29493305d82b861 rdf:first sg:person.012042350145.91
79 rdf:rest N47621d450e8544eda9faa463e4d14717
80 N10b12f0825bb447b88e25b8a4601b2e1 schema:volumeNumber 19
81 rdf:type schema:PublicationVolume
82 N18efec1003ac46558f95393705bfb3e8 schema:issueNumber 5
83 rdf:type schema:PublicationIssue
84 N44103f79986f4161b78dd1b63652d96b schema:name doi
85 schema:value 10.1007/s11665-009-9524-5
86 rdf:type schema:PropertyValue
87 N47621d450e8544eda9faa463e4d14717 rdf:first sg:person.015406231623.73
88 rdf:rest Nc6fce5a41340460d94080dedf5c57ed6
89 N79ae6d7cf31e45c8b40eec378355810f schema:name Springer Nature - SN SciGraph project
90 rdf:type schema:Organization
91 N8943f7de6c0a46ce8226af9e931bc1f4 schema:name dimensions_id
92 schema:value pub.1003589927
93 rdf:type schema:PropertyValue
94 Nc6fce5a41340460d94080dedf5c57ed6 rdf:first sg:person.015440524245.80
95 rdf:rest rdf:nil
96 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
97 schema:name Engineering
98 rdf:type schema:DefinedTerm
99 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
100 schema:name Materials Engineering
101 rdf:type schema:DefinedTerm
102 sg:journal.1042007 schema:issn 1059-9495
103 1544-1024
104 schema:name Journal of Materials Engineering and Performance
105 schema:publisher Springer Nature
106 rdf:type schema:Periodical
107 sg:person.012042350145.91 schema:affiliation grid-institutes:grid.265881.0
108 schema:familyName Menzemer
109 schema:givenName C. C.
110 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012042350145.91
111 rdf:type schema:Person
112 sg:person.015406231623.73 schema:affiliation grid-institutes:grid.265881.0
113 schema:familyName Lam
114 schema:givenName D. F.
115 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015406231623.73
116 rdf:type schema:Person
117 sg:person.015440524245.80 schema:affiliation grid-institutes:grid.265881.0
118 schema:familyName Srivatsan
119 schema:givenName T. S.
120 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015440524245.80
121 rdf:type schema:Person
122 sg:pub.10.1007/bf00354237 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036473679
123 https://doi.org/10.1007/bf00354237
124 rdf:type schema:CreativeWork
125 sg:pub.10.1007/bf01166019 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006669349
126 https://doi.org/10.1007/bf01166019
127 rdf:type schema:CreativeWork
128 sg:pub.10.1007/s11661-008-9703-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008597862
129 https://doi.org/10.1007/s11661-008-9703-2
130 rdf:type schema:CreativeWork
131 grid-institutes:grid.265881.0 schema:alternateName Department of Civil Engineering, University of Akron, 44324, Akron, OH, USA
132 Department of Mechanical Engineering, University of Akron, 44324, Akron, OH, USA
133 schema:name Department of Civil Engineering, University of Akron, 44324, Akron, OH, USA
134 Department of Mechanical Engineering, University of Akron, 44324, Akron, OH, USA
135 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...