Ontology type: schema:ScholarlyArticle
2015-07
AUTHORSM.A. Matin, K. Oishi, A. Katsuta, D. Akai, K. Sawada, M. Ishida
ABSTRACTUsing combined experimental and simulation techniques, this study addresses the critical stress for peeling off crucial layer(s) in multilayered epitaxial functional thin films PbZr0.4Ti0.6O3(PZT)/Pt/γ-Al2O3 on n-Si(001) substrate. The thickness of platinum (Pt) and PZT thin films was varied from 22 nm to 142 nm and 90 nm to 450 nm, respectively. Residual stresses were measured by analyzing captured fringes using Newton’s rings technique. Advanced finite element computation was next conducted to predict the evolution of residual stresses. Induced stresses in Pt thin film were found to be decreased with decreasing the thickness of film from 72 nm to 40 nm. In contrast, stresses are shown to be decreased with increasing the thickness of PZT film from 240 nm to 450 nm. The design of the pyroelectric multilayered sensors was thus optimized employing finite element (FE) simulation. Computed stresses were found to correlate well with that observed in experiments. FE simulations can thus be used as a tool to a priori predict the evolution of residual stresses, which may allow a fail-safe design before the fabrication of pyroelectric image sensors. More... »
PAGES2544-2553
http://scigraph.springernature.com/pub.10.1007/s11664-015-3631-x
DOIhttp://dx.doi.org/10.1007/s11664-015-3631-x
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1046502732
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "Bangladesh University of Engineering and Technology",
"id": "https://www.grid.ac/institutes/grid.411512.2",
"name": [
"Glass and Ceramic Engineering, Bangladesh University of Engineering and Technology, 1000, Dhaka, Bangladesh"
],
"type": "Organization"
},
"familyName": "Matin",
"givenName": "M.A.",
"id": "sg:person.015452131546.47",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015452131546.47"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Toyohashi University of Technology",
"id": "https://www.grid.ac/institutes/grid.412804.b",
"name": [
"Electrical and Electronic Information Engineering, Toyohashi University of Technology, 441-8580, Toyohashi, Aichi, Japan"
],
"type": "Organization"
},
"familyName": "Oishi",
"givenName": "K.",
"id": "sg:person.014301324415.25",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014301324415.25"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Toyohashi University of Technology",
"id": "https://www.grid.ac/institutes/grid.412804.b",
"name": [
"Electrical and Electronic Information Engineering, Toyohashi University of Technology, 441-8580, Toyohashi, Aichi, Japan"
],
"type": "Organization"
},
"familyName": "Katsuta",
"givenName": "A.",
"id": "sg:person.010230525356.69",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010230525356.69"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Toyohashi University of Technology",
"id": "https://www.grid.ac/institutes/grid.412804.b",
"name": [
"Electrical and Electronic Information Engineering, Toyohashi University of Technology, 441-8580, Toyohashi, Aichi, Japan"
],
"type": "Organization"
},
"familyName": "Akai",
"givenName": "D.",
"id": "sg:person.014127227365.87",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014127227365.87"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Toyohashi University of Technology",
"id": "https://www.grid.ac/institutes/grid.412804.b",
"name": [
"Electrical and Electronic Information Engineering, Toyohashi University of Technology, 441-8580, Toyohashi, Aichi, Japan",
"Electronics-Inspired Interdisciplinary Research Institute (EIIRIS), Toyohashi University of Technology, 441-8580, Toyohashi, Japan"
],
"type": "Organization"
},
"familyName": "Sawada",
"givenName": "K.",
"id": "sg:person.016131417075.38",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016131417075.38"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Toyohashi University of Technology",
"id": "https://www.grid.ac/institutes/grid.412804.b",
"name": [
"Electrical and Electronic Information Engineering, Toyohashi University of Technology, 441-8580, Toyohashi, Aichi, Japan",
"Electronics-Inspired Interdisciplinary Research Institute (EIIRIS), Toyohashi University of Technology, 441-8580, Toyohashi, Japan"
],
"type": "Organization"
},
"familyName": "Ishida",
"givenName": "M.",
"id": "sg:person.011406773521.22",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011406773521.22"
],
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.1016/j.tsf.2003.12.102",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1001201557"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0040-6090(03)00276-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002623108"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0040-6090(03)00276-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002623108"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.mseb.2010.07.015",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1008707269"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0257-8972(95)02436-0",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1011039321"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.snb.2006.08.003",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1012504481"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1098/rspa.1909.0021",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014142452"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0924-4247(98)00050-8",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1032431740"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0040-6090(00)00996-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036992674"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.mee.2007.04.053",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1039197777"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0040-6090(00)01314-6",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1043523642"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.tsf.2007.03.007",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1044286973"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0167-9317(03)00461-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1048866791"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0167-9317(03)00461-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1048866791"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.commatsci.2003.10.012",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1048999466"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/(sici)1097-0207(19970315)40:5<817::aid-nme90>3.0.co;2-b",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049123036"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/(sici)1097-0207(19970315)40:5<817::aid-nme90>3.0.co;2-b",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049123036"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0022-0248(03)01587-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049718905"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0022-0248(03)01587-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049718905"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1063/1.1702809",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1057773034"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1063/1.99685",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1058139763"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1103/physrevb.62.4707",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1060597693"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1103/physrevb.62.4707",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1060597693"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1109/58.294117",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1061190685"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1109/58.883530",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1061191893"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1109/96.618223",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1061250777"
],
"type": "CreativeWork"
}
],
"datePublished": "2015-07",
"datePublishedReg": "2015-07-01",
"description": "Using combined experimental and simulation techniques, this study addresses the critical stress for peeling off crucial layer(s) in multilayered epitaxial functional thin films PbZr0.4Ti0.6O3(PZT)/Pt/\u03b3-Al2O3 on n-Si(001) substrate. The thickness of platinum (Pt) and PZT thin films was varied from 22 nm to 142 nm and 90 nm to 450 nm, respectively. Residual stresses were measured by analyzing captured fringes using Newton\u2019s rings technique. Advanced finite element computation was next conducted to predict the evolution of residual stresses. Induced stresses in Pt thin film were found to be decreased with decreasing the thickness of film from 72 nm to 40 nm. In contrast, stresses are shown to be decreased with increasing the thickness of PZT film from 240 nm to 450 nm. The design of the pyroelectric multilayered sensors was thus optimized employing finite element (FE) simulation. Computed stresses were found to correlate well with that observed in experiments. FE simulations can thus be used as a tool to a priori predict the evolution of residual stresses, which may allow a fail-safe design before the fabrication of pyroelectric image sensors.",
"genre": "research_article",
"id": "sg:pub.10.1007/s11664-015-3631-x",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1136213",
"issn": [
"0361-5235",
"1543-186X"
],
"name": "Journal of Electronic Materials",
"type": "Periodical"
},
{
"issueNumber": "7",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "44"
}
],
"name": "Aspects of Integrating Functional Electroceramic Material in Multilayer Thin Films for Image Sensing: Modeling and Experiment",
"pagination": "2544-2553",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"dd854c8fbe69f2e6e67ec45c1f546735c69d41a2c7caa3598d2f3eeb0d14b7fd"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s11664-015-3631-x"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1046502732"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s11664-015-3631-x",
"https://app.dimensions.ai/details/publication/pub.1046502732"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-10T16:45",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8669_00000524.jsonl",
"type": "ScholarlyArticle",
"url": "http://link.springer.com/10.1007%2Fs11664-015-3631-x"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11664-015-3631-x'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11664-015-3631-x'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11664-015-3631-x'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11664-015-3631-x'
This table displays all metadata directly associated to this object as RDF triples.
163 TRIPLES
21 PREDICATES
48 URIs
19 LITERALS
7 BLANK NODES