Test environments and mechanical properties of Zr-base bulk amorphous alloys View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

1998-07

AUTHORS

C. T. Liu, L. Heatherly, J. A. Horton, D. S. Easton, C. A. Carmichael, J. L. Wright, J. H. Schneibel, M. H. Yoo, C. H. Chen, A. Inoue

ABSTRACT

The mechanical properties of two Zr-base bulk amorphous alloys (BAA), Zr-10Al-30Cu-5Ni (BAA-10) and Zr-10Al-5Ti-17.9Cu-14.6Ni (BAA-11), were studied by both tensile and compressive tests at room temperature in various test environments. The BAA ingots up to 7 mm in diameter were successfully produced by both arc melting and drop casting and induction melting and injection casting. The BAA specimens deformed mainly elastically, followed by catastrophic failure along shear bands. Examination of the fracture region revealed ductile fracture features resulting from a substantial increase in temperature, which was attributable to the conversion of the stored elastic strain energy to heat. Surprisingly, “liquid droplets” located at major shear-band cracks adjacent to the fracture section were observed, indicating the occurrence of local melting during fracture. The angle orientation of shear bands, shear-band cracks, and fracture surfaces relative to the stress axis is quite different for BAA specimens tested in tension and compression. This suggests that both shear stress and normal stress may play a role in developing shear bands during plastic deformation. The tensile properties of BAAs were found to be insensitive to the test environment at room temperature. However, the reaction of BAAs with distilled water and heavy water was detected by laser desorption mass spectrometry (LDMS). These results suggest that moisture-induced hydrogen embrittlement in BAAs may be masked by catastrophic fracture following shear bands. More... »

PAGES

1811-1820

References to SciGraph publications

  • 1996-02. The dynamic compressive behavior of beryllium bearing bulk metallic glasses in JOURNAL OF MATERIALS RESEARCH
  • 1998-07. Ferromagnetic bulk amorphous alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1960-09. Non-crystalline Structure in Solidified Gold–Silicon Alloys in NATURE
  • 1987-08. A 3-D finite element analysis of a chevron-notched, three-point bend fracture specimen for ceramic materials in INTERNATIONAL JOURNAL OF FRACTURE
  • 1974-05. The fracture topography of metallic glasses in JOURNAL OF MATERIALS SCIENCE
  • 1972-03. Plastic flow and fracture of metallic glass in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11661-998-0004-6

    DOI

    http://dx.doi.org/10.1007/s11661-998-0004-6

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1009346214


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN", 
              "id": "http://www.grid.ac/institutes/grid.135519.a", 
              "name": [
                "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Liu", 
            "givenName": "C. T.", 
            "id": "sg:person.011275665477.02", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011275665477.02"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN", 
              "id": "http://www.grid.ac/institutes/grid.135519.a", 
              "name": [
                "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Heatherly", 
            "givenName": "L.", 
            "id": "sg:person.014667107665.24", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014667107665.24"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN", 
              "id": "http://www.grid.ac/institutes/grid.135519.a", 
              "name": [
                "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Horton", 
            "givenName": "J. A.", 
            "id": "sg:person.012073246077.19", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012073246077.19"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN", 
              "id": "http://www.grid.ac/institutes/grid.135519.a", 
              "name": [
                "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Easton", 
            "givenName": "D. S.", 
            "id": "sg:person.010346235744.80", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010346235744.80"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN", 
              "id": "http://www.grid.ac/institutes/grid.135519.a", 
              "name": [
                "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Carmichael", 
            "givenName": "C. A.", 
            "id": "sg:person.014006510271.29", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014006510271.29"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN", 
              "id": "http://www.grid.ac/institutes/grid.135519.a", 
              "name": [
                "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Wright", 
            "givenName": "J. L.", 
            "id": "sg:person.014523347451.12", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014523347451.12"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN", 
              "id": "http://www.grid.ac/institutes/grid.135519.a", 
              "name": [
                "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Schneibel", 
            "givenName": "J. H.", 
            "id": "sg:person.012465266145.66", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012465266145.66"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN", 
              "id": "http://www.grid.ac/institutes/grid.135519.a", 
              "name": [
                "the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Yoo", 
            "givenName": "M. H.", 
            "id": "sg:person.015476566317.12", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015476566317.12"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Life Sciences Division, Oak Ridge National Laboratory, Japan", 
              "id": "http://www.grid.ac/institutes/None", 
              "name": [
                "the Life Sciences Division, Oak Ridge National Laboratory, Japan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Chen", 
            "givenName": "C. H.", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "the Institute for Materials Research, Tohoku University, 980-8577, Sendai, Japan", 
              "id": "http://www.grid.ac/institutes/grid.69566.3a", 
              "name": [
                "the Institute for Materials Research, Tohoku University, 980-8577, Sendai, Japan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Inoue", 
            "givenName": "A.", 
            "id": "sg:person.07642612271.86", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07642612271.86"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/bf00761791", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045067964", 
              "https://doi.org/10.1007/bf00761791"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00013083", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023907468", 
              "https://doi.org/10.1007/bf00013083"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02642754", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023862292", 
              "https://doi.org/10.1007/bf02642754"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-998-0001-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009741094", 
              "https://doi.org/10.1007/s11661-998-0001-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1557/jmr.1996.0060", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052916244", 
              "https://doi.org/10.1557/jmr.1996.0060"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/187869b0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018841532", 
              "https://doi.org/10.1038/187869b0"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "1998-07", 
        "datePublishedReg": "1998-07-01", 
        "description": "The mechanical properties of two Zr-base bulk amorphous alloys (BAA), Zr-10Al-30Cu-5Ni (BAA-10) and Zr-10Al-5Ti-17.9Cu-14.6Ni (BAA-11), were studied by both tensile and compressive tests at room temperature in various test environments. The BAA ingots up to 7 mm in diameter were successfully produced by both arc melting and drop casting and induction melting and injection casting. The BAA specimens deformed mainly elastically, followed by catastrophic failure along shear bands. Examination of the fracture region revealed ductile fracture features resulting from a substantial increase in temperature, which was attributable to the conversion of the stored elastic strain energy to heat. Surprisingly, \u201cliquid droplets\u201d located at major shear-band cracks adjacent to the fracture section were observed, indicating the occurrence of local melting during fracture. The angle orientation of shear bands, shear-band cracks, and fracture surfaces relative to the stress axis is quite different for BAA specimens tested in tension and compression. This suggests that both shear stress and normal stress may play a role in developing shear bands during plastic deformation. The tensile properties of BAAs were found to be insensitive to the test environment at room temperature. However, the reaction of BAAs with distilled water and heavy water was detected by laser desorption mass spectrometry (LDMS). These results suggest that moisture-induced hydrogen embrittlement in BAAs may be masked by catastrophic fracture following shear bands.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/s11661-998-0004-6", 
        "inLanguage": "en", 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136292", 
            "issn": [
              "1073-5623", 
              "1543-1940"
            ], 
            "name": "Metallurgical and Materials Transactions A", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "7", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "29"
          }
        ], 
        "keywords": [
          "bulk amorphous alloys", 
          "shear bands", 
          "mechanical properties", 
          "moisture-induced hydrogen embrittlement", 
          "amorphous alloys", 
          "ductile fracture features", 
          "elastic strain energy", 
          "injection casting", 
          "fracture section", 
          "hydrogen embrittlement", 
          "fracture surfaces", 
          "fracture features", 
          "compressive tests", 
          "test environment", 
          "plastic deformation", 
          "tensile properties", 
          "induction melting", 
          "catastrophic fracture", 
          "liquid droplets", 
          "catastrophic failure", 
          "room temperature", 
          "fracture region", 
          "drop casting", 
          "normal stress", 
          "strain energy", 
          "shear stress", 
          "local melting", 
          "cracks", 
          "casting", 
          "angle orientation", 
          "alloy", 
          "temperature", 
          "melting", 
          "heavy water", 
          "distilled water", 
          "stress axis", 
          "properties", 
          "embrittlement", 
          "water", 
          "deformation", 
          "fractures", 
          "droplets", 
          "stress", 
          "surface", 
          "energy", 
          "band", 
          "diameter", 
          "compression", 
          "substantial increase", 
          "environment", 
          "tension", 
          "orientation", 
          "test", 
          "conversion", 
          "results", 
          "failure", 
          "axis", 
          "increase", 
          "sections", 
          "region", 
          "features", 
          "reaction", 
          "occurrence", 
          "spectrometry", 
          "role", 
          "desorption mass spectrometry", 
          "mass spectrometry", 
          "examination", 
          "laser desorption mass spectrometry", 
          "Zr-base bulk amorphous alloys", 
          "Zr-10Al-30Cu-5Ni", 
          "major shear-band cracks", 
          "shear-band cracks", 
          "reaction of BAAs"
        ], 
        "name": "Test environments and mechanical properties of Zr-base bulk amorphous alloys", 
        "pagination": "1811-1820", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1009346214"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11661-998-0004-6"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11661-998-0004-6", 
          "https://app.dimensions.ai/details/publication/pub.1009346214"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2021-11-01T18:01", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20211101/entities/gbq_results/article/article_274.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/s11661-998-0004-6"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11661-998-0004-6'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11661-998-0004-6'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11661-998-0004-6'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11661-998-0004-6'


     

    This table displays all metadata directly associated to this object as RDF triples.

    224 TRIPLES      22 PREDICATES      106 URIs      92 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11661-998-0004-6 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N8086c1c7b07d4d93b03b2f569f4ff8ed
    4 schema:citation sg:pub.10.1007/bf00013083
    5 sg:pub.10.1007/bf00761791
    6 sg:pub.10.1007/bf02642754
    7 sg:pub.10.1007/s11661-998-0001-9
    8 sg:pub.10.1038/187869b0
    9 sg:pub.10.1557/jmr.1996.0060
    10 schema:datePublished 1998-07
    11 schema:datePublishedReg 1998-07-01
    12 schema:description The mechanical properties of two Zr-base bulk amorphous alloys (BAA), Zr-10Al-30Cu-5Ni (BAA-10) and Zr-10Al-5Ti-17.9Cu-14.6Ni (BAA-11), were studied by both tensile and compressive tests at room temperature in various test environments. The BAA ingots up to 7 mm in diameter were successfully produced by both arc melting and drop casting and induction melting and injection casting. The BAA specimens deformed mainly elastically, followed by catastrophic failure along shear bands. Examination of the fracture region revealed ductile fracture features resulting from a substantial increase in temperature, which was attributable to the conversion of the stored elastic strain energy to heat. Surprisingly, “liquid droplets” located at major shear-band cracks adjacent to the fracture section were observed, indicating the occurrence of local melting during fracture. The angle orientation of shear bands, shear-band cracks, and fracture surfaces relative to the stress axis is quite different for BAA specimens tested in tension and compression. This suggests that both shear stress and normal stress may play a role in developing shear bands during plastic deformation. The tensile properties of BAAs were found to be insensitive to the test environment at room temperature. However, the reaction of BAAs with distilled water and heavy water was detected by laser desorption mass spectrometry (LDMS). These results suggest that moisture-induced hydrogen embrittlement in BAAs may be masked by catastrophic fracture following shear bands.
    13 schema:genre article
    14 schema:inLanguage en
    15 schema:isAccessibleForFree false
    16 schema:isPartOf Naa45b8d90b67484a8236b57176dd21f4
    17 Ndb366157b7994d5a94e3d79973be4685
    18 sg:journal.1136292
    19 schema:keywords Zr-10Al-30Cu-5Ni
    20 Zr-base bulk amorphous alloys
    21 alloy
    22 amorphous alloys
    23 angle orientation
    24 axis
    25 band
    26 bulk amorphous alloys
    27 casting
    28 catastrophic failure
    29 catastrophic fracture
    30 compression
    31 compressive tests
    32 conversion
    33 cracks
    34 deformation
    35 desorption mass spectrometry
    36 diameter
    37 distilled water
    38 drop casting
    39 droplets
    40 ductile fracture features
    41 elastic strain energy
    42 embrittlement
    43 energy
    44 environment
    45 examination
    46 failure
    47 features
    48 fracture features
    49 fracture region
    50 fracture section
    51 fracture surfaces
    52 fractures
    53 heavy water
    54 hydrogen embrittlement
    55 increase
    56 induction melting
    57 injection casting
    58 laser desorption mass spectrometry
    59 liquid droplets
    60 local melting
    61 major shear-band cracks
    62 mass spectrometry
    63 mechanical properties
    64 melting
    65 moisture-induced hydrogen embrittlement
    66 normal stress
    67 occurrence
    68 orientation
    69 plastic deformation
    70 properties
    71 reaction
    72 reaction of BAAs
    73 region
    74 results
    75 role
    76 room temperature
    77 sections
    78 shear bands
    79 shear stress
    80 shear-band cracks
    81 spectrometry
    82 strain energy
    83 stress
    84 stress axis
    85 substantial increase
    86 surface
    87 temperature
    88 tensile properties
    89 tension
    90 test
    91 test environment
    92 water
    93 schema:name Test environments and mechanical properties of Zr-base bulk amorphous alloys
    94 schema:pagination 1811-1820
    95 schema:productId N623a167ba55f47ac872594d9c3506ef9
    96 Nef6bd37ac3de4585b2d0f5b42e161222
    97 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009346214
    98 https://doi.org/10.1007/s11661-998-0004-6
    99 schema:sdDatePublished 2021-11-01T18:01
    100 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    101 schema:sdPublisher N2c9da2367e624f8ca68db40a16fccf18
    102 schema:url https://doi.org/10.1007/s11661-998-0004-6
    103 sgo:license sg:explorer/license/
    104 sgo:sdDataset articles
    105 rdf:type schema:ScholarlyArticle
    106 N0b97ffe6f1ca4cc1a1891695aa55d4e2 rdf:first Na9f22cbc8044466bae174fe3b7dce36f
    107 rdf:rest N9c8a208b327a4534aa7ac7bbce557d03
    108 N2c9da2367e624f8ca68db40a16fccf18 schema:name Springer Nature - SN SciGraph project
    109 rdf:type schema:Organization
    110 N49b693b511c24f3abc5acddee52d5ff7 rdf:first sg:person.012073246077.19
    111 rdf:rest Nfd6535ae74424726b65528c1c109063b
    112 N623a167ba55f47ac872594d9c3506ef9 schema:name dimensions_id
    113 schema:value pub.1009346214
    114 rdf:type schema:PropertyValue
    115 N64d926d299794ce7be1fc575882612bd rdf:first sg:person.014006510271.29
    116 rdf:rest Nda6ef92236f64275aa7b1533ec920147
    117 N6b01e2d4119c4cd5a548e8c81d52a5e9 rdf:first sg:person.012465266145.66
    118 rdf:rest N7c35fd294a9d41c3b2eaf32d2777360b
    119 N7c35fd294a9d41c3b2eaf32d2777360b rdf:first sg:person.015476566317.12
    120 rdf:rest N0b97ffe6f1ca4cc1a1891695aa55d4e2
    121 N8086c1c7b07d4d93b03b2f569f4ff8ed rdf:first sg:person.011275665477.02
    122 rdf:rest Ncb62a4601d5f42c3943e82c18a10bbc9
    123 N9c8a208b327a4534aa7ac7bbce557d03 rdf:first sg:person.07642612271.86
    124 rdf:rest rdf:nil
    125 Na9f22cbc8044466bae174fe3b7dce36f schema:affiliation grid-institutes:None
    126 schema:familyName Chen
    127 schema:givenName C. H.
    128 rdf:type schema:Person
    129 Naa45b8d90b67484a8236b57176dd21f4 schema:volumeNumber 29
    130 rdf:type schema:PublicationVolume
    131 Ncb62a4601d5f42c3943e82c18a10bbc9 rdf:first sg:person.014667107665.24
    132 rdf:rest N49b693b511c24f3abc5acddee52d5ff7
    133 Nda6ef92236f64275aa7b1533ec920147 rdf:first sg:person.014523347451.12
    134 rdf:rest N6b01e2d4119c4cd5a548e8c81d52a5e9
    135 Ndb366157b7994d5a94e3d79973be4685 schema:issueNumber 7
    136 rdf:type schema:PublicationIssue
    137 Nef6bd37ac3de4585b2d0f5b42e161222 schema:name doi
    138 schema:value 10.1007/s11661-998-0004-6
    139 rdf:type schema:PropertyValue
    140 Nfd6535ae74424726b65528c1c109063b rdf:first sg:person.010346235744.80
    141 rdf:rest N64d926d299794ce7be1fc575882612bd
    142 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    143 schema:name Engineering
    144 rdf:type schema:DefinedTerm
    145 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    146 schema:name Materials Engineering
    147 rdf:type schema:DefinedTerm
    148 sg:journal.1136292 schema:issn 1073-5623
    149 1543-1940
    150 schema:name Metallurgical and Materials Transactions A
    151 schema:publisher Springer Nature
    152 rdf:type schema:Periodical
    153 sg:person.010346235744.80 schema:affiliation grid-institutes:grid.135519.a
    154 schema:familyName Easton
    155 schema:givenName D. S.
    156 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010346235744.80
    157 rdf:type schema:Person
    158 sg:person.011275665477.02 schema:affiliation grid-institutes:grid.135519.a
    159 schema:familyName Liu
    160 schema:givenName C. T.
    161 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011275665477.02
    162 rdf:type schema:Person
    163 sg:person.012073246077.19 schema:affiliation grid-institutes:grid.135519.a
    164 schema:familyName Horton
    165 schema:givenName J. A.
    166 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012073246077.19
    167 rdf:type schema:Person
    168 sg:person.012465266145.66 schema:affiliation grid-institutes:grid.135519.a
    169 schema:familyName Schneibel
    170 schema:givenName J. H.
    171 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012465266145.66
    172 rdf:type schema:Person
    173 sg:person.014006510271.29 schema:affiliation grid-institutes:grid.135519.a
    174 schema:familyName Carmichael
    175 schema:givenName C. A.
    176 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014006510271.29
    177 rdf:type schema:Person
    178 sg:person.014523347451.12 schema:affiliation grid-institutes:grid.135519.a
    179 schema:familyName Wright
    180 schema:givenName J. L.
    181 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014523347451.12
    182 rdf:type schema:Person
    183 sg:person.014667107665.24 schema:affiliation grid-institutes:grid.135519.a
    184 schema:familyName Heatherly
    185 schema:givenName L.
    186 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014667107665.24
    187 rdf:type schema:Person
    188 sg:person.015476566317.12 schema:affiliation grid-institutes:grid.135519.a
    189 schema:familyName Yoo
    190 schema:givenName M. H.
    191 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015476566317.12
    192 rdf:type schema:Person
    193 sg:person.07642612271.86 schema:affiliation grid-institutes:grid.69566.3a
    194 schema:familyName Inoue
    195 schema:givenName A.
    196 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07642612271.86
    197 rdf:type schema:Person
    198 sg:pub.10.1007/bf00013083 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023907468
    199 https://doi.org/10.1007/bf00013083
    200 rdf:type schema:CreativeWork
    201 sg:pub.10.1007/bf00761791 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045067964
    202 https://doi.org/10.1007/bf00761791
    203 rdf:type schema:CreativeWork
    204 sg:pub.10.1007/bf02642754 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023862292
    205 https://doi.org/10.1007/bf02642754
    206 rdf:type schema:CreativeWork
    207 sg:pub.10.1007/s11661-998-0001-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009741094
    208 https://doi.org/10.1007/s11661-998-0001-9
    209 rdf:type schema:CreativeWork
    210 sg:pub.10.1038/187869b0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018841532
    211 https://doi.org/10.1038/187869b0
    212 rdf:type schema:CreativeWork
    213 sg:pub.10.1557/jmr.1996.0060 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052916244
    214 https://doi.org/10.1557/jmr.1996.0060
    215 rdf:type schema:CreativeWork
    216 grid-institutes:None schema:alternateName the Life Sciences Division, Oak Ridge National Laboratory, Japan
    217 schema:name the Life Sciences Division, Oak Ridge National Laboratory, Japan
    218 rdf:type schema:Organization
    219 grid-institutes:grid.135519.a schema:alternateName the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN
    220 schema:name the Metals and Ceramics Division, Oak Ridge National Laboratory, 37831-6115, Oak Ridge, TN
    221 rdf:type schema:Organization
    222 grid-institutes:grid.69566.3a schema:alternateName the Institute for Materials Research, Tohoku University, 980-8577, Sendai, Japan
    223 schema:name the Institute for Materials Research, Tohoku University, 980-8577, Sendai, Japan
    224 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...