Ontology type: schema:ScholarlyArticle
2019-03-14
AUTHORSM. Liu, S. Nambu, K. Zhou, P. F. Wang, G. Lu, C. Lu, K. A. Tieu, T. Koseki
ABSTRACTA three-dimensional crystal plasticity finite element method model is developed to investigate the influence of the grain boundary (GB) misorientation on the equal-channel angular pressing deformation of aluminum bicrystals. Aluminum bicrystals with symmetric 〈112〉 tilt boundaries and misorientations of 9 deg (low angle), 15 deg (transitional), and 30 deg (high angle) have been designed to study the influence of GB misorientations on the deformed areas near GBs. The numerical results indicate that a high-angle grain boundary acts as a barrier in terms of Mises stress distribution, plastic slip, and lattice rotation, while the aluminum bicrystal with low-angle grain boundary still behaves similarly to a single crystal. An intermediate configuration is found for the aluminum bicrystal with transitional grain boundary. It is also found that the geometry of the GB after deformation depends on the initial orientation of the grain at the lower part of the billet. More... »
PAGES1-14
http://scigraph.springernature.com/pub.10.1007/s11661-019-05178-0
DOIhttp://dx.doi.org/10.1007/s11661-019-05178-0
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1112780019
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "University of Tokyo",
"id": "https://www.grid.ac/institutes/grid.26999.3d",
"name": [
"Department of Materials Engineering, The University of Tokyo, 7-3-1 Hongo Bunkyo-ku, 113-8656, Tokyo, Japan"
],
"type": "Organization"
},
"familyName": "Liu",
"givenName": "M.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Tokyo",
"id": "https://www.grid.ac/institutes/grid.26999.3d",
"name": [
"Department of Materials Engineering, The University of Tokyo, 7-3-1 Hongo Bunkyo-ku, 113-8656, Tokyo, Japan"
],
"type": "Organization"
},
"familyName": "Nambu",
"givenName": "S.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Nanyang Technological University",
"id": "https://www.grid.ac/institutes/grid.59025.3b",
"name": [
"School of Mechanical & Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore, Singapore"
],
"type": "Organization"
},
"familyName": "Zhou",
"givenName": "K.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Science and Technology of China",
"id": "https://www.grid.ac/institutes/grid.59053.3a",
"name": [
"CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, 230027, Hefei, China"
],
"type": "Organization"
},
"familyName": "Wang",
"givenName": "P. F.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Swinburne University of Technology",
"id": "https://www.grid.ac/institutes/grid.1027.4",
"name": [
"Faculty of Science, Engineering and Technology, Swinburne University of Technology, 3122, Hawthorn, VIC, Australia"
],
"type": "Organization"
},
"familyName": "Lu",
"givenName": "G.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Wollongong",
"id": "https://www.grid.ac/institutes/grid.1007.6",
"name": [
"School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, 2522, Wollongong, NSW, Australia"
],
"type": "Organization"
},
"familyName": "Lu",
"givenName": "C.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Wollongong",
"id": "https://www.grid.ac/institutes/grid.1007.6",
"name": [
"School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, 2522, Wollongong, NSW, Australia"
],
"type": "Organization"
},
"familyName": "Tieu",
"givenName": "K. A.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Tokyo",
"id": "https://www.grid.ac/institutes/grid.26999.3d",
"name": [
"Department of Materials Engineering, The University of Tokyo, 7-3-1 Hongo Bunkyo-ku, 113-8656, Tokyo, Japan"
],
"type": "Organization"
},
"familyName": "Koseki",
"givenName": "T.",
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.2320/jinstmet.ja201202",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1001421552"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(82)90233-4",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1001886676"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(82)90233-4",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1001886676"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.actamat.2007.07.008",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002718649"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2007.06.073",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1003946619"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2016.04.010",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1004215292"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2014.06.002",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1007555320"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1080/14786435.2015.1128127",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1008083090"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2014.09.034",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010426822"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0022-5096(66)90040-8",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1012748192"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0022-5096(66)90040-8",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1012748192"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.pmatsci.2009.01.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1013225720"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2008.03.007",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014947747"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.actamat.2008.11.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1015261857"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(85)90188-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1015762795"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(85)90188-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1015762795"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2006.03.008",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1016254057"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2008.06.008",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1016896656"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s1359-6454(03)00259-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1018248996"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s1359-6454(03)00259-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1018248996"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2015.02.010",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020514490"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.actamat.2003.11.028",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1023232972"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.scriptamat.2006.03.016",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1024995110"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(80)90162-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1025706876"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(80)90162-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1025706876"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(82)90005-0",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030022496"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(82)90005-0",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030022496"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0022-5096(77)90001-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1035734795"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0022-5096(77)90001-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1035734795"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11661-016-3439-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036088173",
"https://doi.org/10.1007/s11661-016-3439-1"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2014.03.012",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1037664192"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.scriptamat.2008.01.062",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1039136957"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2011.03.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1040388042"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2320/matertrans.m2013076",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1042859882"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1557/jmr.2015.223",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1043740599"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00707-013-1048-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1046192565",
"https://doi.org/10.1007/s00707-013-1048-2"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.actamat.2004.06.042",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1046828734"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.msea.2005.08.029",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1048009402"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1098/rspa.1991.0128",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049820490"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11661-015-3298-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049993195",
"https://doi.org/10.1007/s11661-015-3298-1"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0065-2156(08)70242-4",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050828426"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2016.01.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052913065"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2016.01.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052913065"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2016.01.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052913065"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijplas.2016.01.001",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052913065"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1088/0370-1301/64/9/303",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1059092117"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1115/1.3167205",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1062105127"
],
"type": "CreativeWork"
}
],
"datePublished": "2019-03-14",
"datePublishedReg": "2019-03-14",
"description": "A three-dimensional crystal plasticity finite element method model is developed to investigate the influence of the grain boundary (GB) misorientation on the equal-channel angular pressing deformation of aluminum bicrystals. Aluminum bicrystals with symmetric \u3008112\u3009 tilt boundaries and misorientations of 9 deg (low angle), 15 deg (transitional), and 30 deg (high angle) have been designed to study the influence of GB misorientations on the deformed areas near GBs. The numerical results indicate that a high-angle grain boundary acts as a barrier in terms of Mises stress distribution, plastic slip, and lattice rotation, while the aluminum bicrystal with low-angle grain boundary still behaves similarly to a single crystal. An intermediate configuration is found for the aluminum bicrystal with transitional grain boundary. It is also found that the geometry of the GB after deformation depends on the initial orientation of the grain at the lower part of the billet.",
"genre": "research_article",
"id": "sg:pub.10.1007/s11661-019-05178-0",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1136292",
"issn": [
"1073-5623",
"1543-1940"
],
"name": "Metallurgical and Materials Transactions A",
"type": "Periodical"
},
{
"issueNumber": "5",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "50"
}
],
"name": "On the Influence of Grain Boundary Misorientation on the Severe Plastic Deformation of Aluminum Bicrystals: A Three-Dimensional Crystal Plasticity Finite Element Method Study",
"pagination": "1-14",
"productId": [
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s11661-019-05178-0"
]
},
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"d38cb7a3d95d72280682b77c8fec917698891a69922ccbef30c6cc86ab737163"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1112780019"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s11661-019-05178-0",
"https://app.dimensions.ai/details/publication/pub.1112780019"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-15T08:51",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000374_0000000374/records_119737_00000001.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.1007%2Fs11661-019-05178-0"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11661-019-05178-0'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11661-019-05178-0'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11661-019-05178-0'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11661-019-05178-0'
This table displays all metadata directly associated to this object as RDF triples.
228 TRIPLES
21 PREDICATES
63 URIs
18 LITERALS
7 BLANK NODES