Influence of Temperature and Holding Time on the Interaction of V, Al, and N in Microalloyed Forging Steels View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2014-09

AUTHORS

Lee M. Rothleutner, Robert Cryderman, Chester J. Van Tyne

ABSTRACT

A medium-carbon vanadium microalloyed steel (38MnSiVS5) with three different aluminum levels (0.006, 0.020, and 0.03 wt pct) was used to examine the interaction of vanadium, aluminum, and nitrogen during the heating and cooling cycle for forging. The thermal cycle was simulated using a Gleeble® 1500. Hold times varied from 5 to 45 minutes and temperature varied from 1323 K to 1523 K (1050 °C to 1250 °C). Thermal simulation specimens and as-received material were characterized by quantitative metallography, hardness, and chemical analysis of electrolytically extracted precipitates. The hardness was observed to be relatively constant for all aluminum levels after all thermal simulations at and above 1423 K (1150 °C). Hardness, pearlite fraction, and austenite grain size decreased with increasing aluminum content at the two lowest temperatures examined, which were 1323 K and 1373 K (1050 °C and 1100 °C). The amount of vanadium precipitated in the lowest aluminum steel was very consistent, approximately 70 pct, for the thermal simulations. The amount of precipitated vanadium decreased with increasing amount of aluminum nitride for the 0.03 wt pct Al level. More... »

PAGES

4594-4609

References to SciGraph publications

  • 2011-07. Matrix Dissolution Techniques Applied to Extract and Quantify Precipitates from a Microalloyed Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2008-12. Precipitation and hetero-nucleation effect of V(C, N) in V-microalloyed steel in JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATER. SCI. ED.
  • 2001-01. A model for interphase precipitation in V-microalloyed structural steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1994-05. Intragranular ferrite nucleation in medium-carbon vanadium steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s11661-014-2375-1

    DOI

    http://dx.doi.org/10.1007/s11661-014-2375-1

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1045085901


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0915", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Interdisciplinary Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Colorado School of Mines", 
              "id": "https://www.grid.ac/institutes/grid.254549.b", 
              "name": [
                "Advanced Steel Processing and Products Research Center, George S. Ansell Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Rothleutner", 
            "givenName": "Lee M.", 
            "id": "sg:person.011770327351.44", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011770327351.44"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Colorado School of Mines", 
              "id": "https://www.grid.ac/institutes/grid.254549.b", 
              "name": [
                "Advanced Steel Processing and Products Research Center, George S. Ansell Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Cryderman", 
            "givenName": "Robert", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Colorado School of Mines", 
              "id": "https://www.grid.ac/institutes/grid.254549.b", 
              "name": [
                "Advanced Steel Processing and Products Research Center, George S. Ansell Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Van Tyne", 
            "givenName": "Chester J.", 
            "id": "sg:person.07741770136.12", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07741770136.12"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/j.msea.2008.04.013", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005643996"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/174328409x453253", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008579147"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-010-0579-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014436485", 
              "https://doi.org/10.1007/s11661-010-0579-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1088/0965-0393/18/5/055003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019869582"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1088/0965-0393/18/5/055003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019869582"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/174328409x455233", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023354773"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2355/isijinternational.38.1130", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025175545"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02652268", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027041308", 
              "https://doi.org/10.1007/bf02652268"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02652268", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027041308", 
              "https://doi.org/10.1007/bf02652268"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(02)00498-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027420548"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-6454(02)00498-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027420548"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0364-5916(98)00013-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028295751"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0584-8547(81)80124-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030621647"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0584-8547(81)80124-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030621647"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/srin.201000037", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1031580699"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/srin.201000037", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1031580699"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/imr.1988.33.1.221", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1032083762"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matchar.2007.04.015", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038986641"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-001-0249-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039650659", 
              "https://doi.org/10.1007/s11661-001-0249-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11661-001-0249-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039650659", 
              "https://doi.org/10.1007/s11661-001-0249-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/cmq.2009.48.4.443", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040323861"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11595-007-6844-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047912371", 
              "https://doi.org/10.1007/s11595-007-6844-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1179/cmq.2009.48.2.115", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049675494"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/msf.284-286.83", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1072108442"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/msf.500-501.75", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1072121131"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2320/jinstmet1952.43.11_1068", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084962350"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2320/jinstmet1952.45.1_63", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084970725"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2320/jinstmet1952.44.11_1288", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084973928"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.2320/jinstmet1952.59.4_373", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084976868"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2014-09", 
        "datePublishedReg": "2014-09-01", 
        "description": "A medium-carbon vanadium microalloyed steel (38MnSiVS5) with three different aluminum levels (0.006, 0.020, and 0.03 wt pct) was used to examine the interaction of vanadium, aluminum, and nitrogen during the heating and cooling cycle for forging. The thermal cycle was simulated using a Gleeble\u00ae 1500. Hold times varied from 5 to 45 minutes and temperature varied from 1323 K to 1523 K (1050 \u00b0C to 1250 \u00b0C). Thermal simulation specimens and as-received material were characterized by quantitative metallography, hardness, and chemical analysis of electrolytically extracted precipitates. The hardness was observed to be relatively constant for all aluminum levels after all thermal simulations at and above 1423 K (1150 \u00b0C). Hardness, pearlite fraction, and austenite grain size decreased with increasing aluminum content at the two lowest temperatures examined, which were 1323 K and 1373 K (1050 \u00b0C and 1100 \u00b0C). The amount of vanadium precipitated in the lowest aluminum steel was very consistent, approximately 70 pct, for the thermal simulations. The amount of precipitated vanadium decreased with increasing amount of aluminum nitride for the 0.03 wt pct Al level.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s11661-014-2375-1", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136292", 
            "issn": [
              "1073-5623", 
              "1543-1940"
            ], 
            "name": "Metallurgical and Materials Transactions A", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "10", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "45"
          }
        ], 
        "name": "Influence of Temperature and Holding Time on the Interaction of V, Al, and N in Microalloyed Forging Steels", 
        "pagination": "4594-4609", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "d6c21ca0a79088718e32986f3e7617b28c121b8fa952ab93b1c84c72e752bc0c"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s11661-014-2375-1"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1045085901"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s11661-014-2375-1", 
          "https://app.dimensions.ai/details/publication/pub.1045085901"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-10T15:54", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8664_00000524.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1007%2Fs11661-014-2375-1"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11661-014-2375-1'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11661-014-2375-1'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11661-014-2375-1'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11661-014-2375-1'


     

    This table displays all metadata directly associated to this object as RDF triples.

    147 TRIPLES      21 PREDICATES      50 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s11661-014-2375-1 schema:about anzsrc-for:09
    2 anzsrc-for:0915
    3 schema:author N6c37f6101536406bab11bf6749e6c03d
    4 schema:citation sg:pub.10.1007/bf02652268
    5 sg:pub.10.1007/s11595-007-6844-x
    6 sg:pub.10.1007/s11661-001-0249-9
    7 sg:pub.10.1007/s11661-010-0579-6
    8 https://doi.org/10.1002/srin.201000037
    9 https://doi.org/10.1016/0584-8547(81)80124-3
    10 https://doi.org/10.1016/j.matchar.2007.04.015
    11 https://doi.org/10.1016/j.msea.2008.04.013
    12 https://doi.org/10.1016/s0364-5916(98)00013-3
    13 https://doi.org/10.1016/s1359-6454(02)00498-6
    14 https://doi.org/10.1088/0965-0393/18/5/055003
    15 https://doi.org/10.1179/174328409x453253
    16 https://doi.org/10.1179/174328409x455233
    17 https://doi.org/10.1179/cmq.2009.48.2.115
    18 https://doi.org/10.1179/cmq.2009.48.4.443
    19 https://doi.org/10.1179/imr.1988.33.1.221
    20 https://doi.org/10.2320/jinstmet1952.43.11_1068
    21 https://doi.org/10.2320/jinstmet1952.44.11_1288
    22 https://doi.org/10.2320/jinstmet1952.45.1_63
    23 https://doi.org/10.2320/jinstmet1952.59.4_373
    24 https://doi.org/10.2355/isijinternational.38.1130
    25 https://doi.org/10.4028/www.scientific.net/msf.284-286.83
    26 https://doi.org/10.4028/www.scientific.net/msf.500-501.75
    27 schema:datePublished 2014-09
    28 schema:datePublishedReg 2014-09-01
    29 schema:description A medium-carbon vanadium microalloyed steel (38MnSiVS5) with three different aluminum levels (0.006, 0.020, and 0.03 wt pct) was used to examine the interaction of vanadium, aluminum, and nitrogen during the heating and cooling cycle for forging. The thermal cycle was simulated using a Gleeble® 1500. Hold times varied from 5 to 45 minutes and temperature varied from 1323 K to 1523 K (1050 °C to 1250 °C). Thermal simulation specimens and as-received material were characterized by quantitative metallography, hardness, and chemical analysis of electrolytically extracted precipitates. The hardness was observed to be relatively constant for all aluminum levels after all thermal simulations at and above 1423 K (1150 °C). Hardness, pearlite fraction, and austenite grain size decreased with increasing aluminum content at the two lowest temperatures examined, which were 1323 K and 1373 K (1050 °C and 1100 °C). The amount of vanadium precipitated in the lowest aluminum steel was very consistent, approximately 70 pct, for the thermal simulations. The amount of precipitated vanadium decreased with increasing amount of aluminum nitride for the 0.03 wt pct Al level.
    30 schema:genre research_article
    31 schema:inLanguage en
    32 schema:isAccessibleForFree false
    33 schema:isPartOf N0b61aea52a204f7b8e96be5ccce46e64
    34 Ndd6458e24d0c4d69ac05b8bcfd4bfc18
    35 sg:journal.1136292
    36 schema:name Influence of Temperature and Holding Time on the Interaction of V, Al, and N in Microalloyed Forging Steels
    37 schema:pagination 4594-4609
    38 schema:productId N1d5bc42d22354909a881b17764c07a91
    39 Nb0e18f2a682b4de7a96ebadf841216bb
    40 Nd41aa145964f416e97475681b6946a05
    41 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045085901
    42 https://doi.org/10.1007/s11661-014-2375-1
    43 schema:sdDatePublished 2019-04-10T15:54
    44 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    45 schema:sdPublisher Nc6672a3937f549a29afd65dce2695e0d
    46 schema:url http://link.springer.com/10.1007%2Fs11661-014-2375-1
    47 sgo:license sg:explorer/license/
    48 sgo:sdDataset articles
    49 rdf:type schema:ScholarlyArticle
    50 N0b61aea52a204f7b8e96be5ccce46e64 schema:volumeNumber 45
    51 rdf:type schema:PublicationVolume
    52 N1d5bc42d22354909a881b17764c07a91 schema:name readcube_id
    53 schema:value d6c21ca0a79088718e32986f3e7617b28c121b8fa952ab93b1c84c72e752bc0c
    54 rdf:type schema:PropertyValue
    55 N3b9650f80dc14c8e860edcf3e63542e5 rdf:first Naba55536f5d14b02a262b8fcce183e55
    56 rdf:rest Nf3b2b80934be433ba2393788b95c4675
    57 N6c37f6101536406bab11bf6749e6c03d rdf:first sg:person.011770327351.44
    58 rdf:rest N3b9650f80dc14c8e860edcf3e63542e5
    59 Naba55536f5d14b02a262b8fcce183e55 schema:affiliation https://www.grid.ac/institutes/grid.254549.b
    60 schema:familyName Cryderman
    61 schema:givenName Robert
    62 rdf:type schema:Person
    63 Nb0e18f2a682b4de7a96ebadf841216bb schema:name doi
    64 schema:value 10.1007/s11661-014-2375-1
    65 rdf:type schema:PropertyValue
    66 Nc6672a3937f549a29afd65dce2695e0d schema:name Springer Nature - SN SciGraph project
    67 rdf:type schema:Organization
    68 Nd41aa145964f416e97475681b6946a05 schema:name dimensions_id
    69 schema:value pub.1045085901
    70 rdf:type schema:PropertyValue
    71 Ndd6458e24d0c4d69ac05b8bcfd4bfc18 schema:issueNumber 10
    72 rdf:type schema:PublicationIssue
    73 Nf3b2b80934be433ba2393788b95c4675 rdf:first sg:person.07741770136.12
    74 rdf:rest rdf:nil
    75 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    76 schema:name Engineering
    77 rdf:type schema:DefinedTerm
    78 anzsrc-for:0915 schema:inDefinedTermSet anzsrc-for:
    79 schema:name Interdisciplinary Engineering
    80 rdf:type schema:DefinedTerm
    81 sg:journal.1136292 schema:issn 1073-5623
    82 1543-1940
    83 schema:name Metallurgical and Materials Transactions A
    84 rdf:type schema:Periodical
    85 sg:person.011770327351.44 schema:affiliation https://www.grid.ac/institutes/grid.254549.b
    86 schema:familyName Rothleutner
    87 schema:givenName Lee M.
    88 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011770327351.44
    89 rdf:type schema:Person
    90 sg:person.07741770136.12 schema:affiliation https://www.grid.ac/institutes/grid.254549.b
    91 schema:familyName Van Tyne
    92 schema:givenName Chester J.
    93 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07741770136.12
    94 rdf:type schema:Person
    95 sg:pub.10.1007/bf02652268 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027041308
    96 https://doi.org/10.1007/bf02652268
    97 rdf:type schema:CreativeWork
    98 sg:pub.10.1007/s11595-007-6844-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1047912371
    99 https://doi.org/10.1007/s11595-007-6844-x
    100 rdf:type schema:CreativeWork
    101 sg:pub.10.1007/s11661-001-0249-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039650659
    102 https://doi.org/10.1007/s11661-001-0249-9
    103 rdf:type schema:CreativeWork
    104 sg:pub.10.1007/s11661-010-0579-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014436485
    105 https://doi.org/10.1007/s11661-010-0579-6
    106 rdf:type schema:CreativeWork
    107 https://doi.org/10.1002/srin.201000037 schema:sameAs https://app.dimensions.ai/details/publication/pub.1031580699
    108 rdf:type schema:CreativeWork
    109 https://doi.org/10.1016/0584-8547(81)80124-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030621647
    110 rdf:type schema:CreativeWork
    111 https://doi.org/10.1016/j.matchar.2007.04.015 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038986641
    112 rdf:type schema:CreativeWork
    113 https://doi.org/10.1016/j.msea.2008.04.013 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005643996
    114 rdf:type schema:CreativeWork
    115 https://doi.org/10.1016/s0364-5916(98)00013-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028295751
    116 rdf:type schema:CreativeWork
    117 https://doi.org/10.1016/s1359-6454(02)00498-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027420548
    118 rdf:type schema:CreativeWork
    119 https://doi.org/10.1088/0965-0393/18/5/055003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019869582
    120 rdf:type schema:CreativeWork
    121 https://doi.org/10.1179/174328409x453253 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008579147
    122 rdf:type schema:CreativeWork
    123 https://doi.org/10.1179/174328409x455233 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023354773
    124 rdf:type schema:CreativeWork
    125 https://doi.org/10.1179/cmq.2009.48.2.115 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049675494
    126 rdf:type schema:CreativeWork
    127 https://doi.org/10.1179/cmq.2009.48.4.443 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040323861
    128 rdf:type schema:CreativeWork
    129 https://doi.org/10.1179/imr.1988.33.1.221 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032083762
    130 rdf:type schema:CreativeWork
    131 https://doi.org/10.2320/jinstmet1952.43.11_1068 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084962350
    132 rdf:type schema:CreativeWork
    133 https://doi.org/10.2320/jinstmet1952.44.11_1288 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084973928
    134 rdf:type schema:CreativeWork
    135 https://doi.org/10.2320/jinstmet1952.45.1_63 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084970725
    136 rdf:type schema:CreativeWork
    137 https://doi.org/10.2320/jinstmet1952.59.4_373 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084976868
    138 rdf:type schema:CreativeWork
    139 https://doi.org/10.2355/isijinternational.38.1130 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025175545
    140 rdf:type schema:CreativeWork
    141 https://doi.org/10.4028/www.scientific.net/msf.284-286.83 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072108442
    142 rdf:type schema:CreativeWork
    143 https://doi.org/10.4028/www.scientific.net/msf.500-501.75 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072121131
    144 rdf:type schema:CreativeWork
    145 https://www.grid.ac/institutes/grid.254549.b schema:alternateName Colorado School of Mines
    146 schema:name Advanced Steel Processing and Products Research Center, George S. Ansell Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA
    147 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...