Ontology type: schema:ScholarlyArticle
2013-08-29
AUTHORSGopinath Thirunavukarasu, Sukumar Kundu, Brajendra Mishra, Subrata Chatterjee
ABSTRACTAn investigation was carried out on the solid-state diffusion bonding between Ti-6Al-4V (TiA) and 304 stainless steel (SS) using pure nickel (Ni) of 200-μm thickness as an intermediate material prepared in vacuum in the temperature range from 973 K to 1073 K (700 °C to 800 °C) in steps of 298 K (25 °C) using uniaxial compressive pressure of 3 MPa and 60 minutes as bonding time. Scanning electron microscopy images, in backscattered electron mode, had revealed existence of layerwise Ti-Ni-based intermetallics such as either Ni3Ti or both Ni3Ti and NiTi at titanium alloy-nickel (TiA/Ni) interface, whereas nickel-stainless steel (Ni/SS) diffusion zone was free from intermetallic phases for all joints processed. Chemical composition of the reaction layers was determined in atomic percentage by energy dispersive spectroscopy and confirmed by X-ray diffraction study. Room-temperature properties of the bonded joints were characterized using microhardness evaluation and tensile testing. The maximum hardness value of ~800 HV was observed at TiA/Ni interface for the bond processed at 1073 K (800 °C). The hardness value at Ni/SS interface for all the bonds was found to be ~330 HV. Maximum tensile strength of ~206 MPa along with ~2.9 pct ductility was obtained for the joint processed at 1023 K (750 °C). It was observed from the activation study that the diffusion rate at TiA/Ni interface is lesser than that at the Ni/SS interface. From microhardness profile, fractured surfaces and fracture path, it was demonstrated that failure of the joints was initiated and propagated apparently at the TiA/Ni interface near Ni3Ti intermetallic phase. More... »
PAGES2067-2077
http://scigraph.springernature.com/pub.10.1007/s11661-013-1940-3
DOIhttp://dx.doi.org/10.1007/s11661-013-1940-3
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1024564875
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, 711103, Howrah, West Bengal, India",
"id": "http://www.grid.ac/institutes/grid.440667.7",
"name": [
"Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, 711103, Howrah, West Bengal, India"
],
"type": "Organization"
},
"familyName": "Thirunavukarasu",
"givenName": "Gopinath",
"id": "sg:person.012537775655.66",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012537775655.66"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA",
"id": "http://www.grid.ac/institutes/grid.254549.b",
"name": [
"Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, 711103, Howrah, West Bengal, India",
"Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA"
],
"type": "Organization"
},
"familyName": "Kundu",
"givenName": "Sukumar",
"id": "sg:person.012640625735.37",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012640625735.37"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA",
"id": "http://www.grid.ac/institutes/grid.254549.b",
"name": [
"Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA"
],
"type": "Organization"
},
"familyName": "Mishra",
"givenName": "Brajendra",
"id": "sg:person.01022526340.57",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01022526340.57"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, 711103, Howrah, West Bengal, India",
"id": "http://www.grid.ac/institutes/grid.440667.7",
"name": [
"Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, 711103, Howrah, West Bengal, India"
],
"type": "Organization"
},
"familyName": "Chatterjee",
"givenName": "Subrata",
"id": "sg:person.016424110335.47",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016424110335.47"
],
"type": "Person"
}
],
"citation": [
{
"id": "sg:pub.10.1007/bf02664680",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1015316934",
"https://doi.org/10.1007/bf02664680"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11661-012-1553-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036338329",
"https://doi.org/10.1007/s11661-012-1553-2"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1023/a:1018694106588",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002550592",
"https://doi.org/10.1023/a:1018694106588"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/bf00367903",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1001616107",
"https://doi.org/10.1007/bf00367903"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/bf00540018",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1043130700",
"https://doi.org/10.1007/bf00540018"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11661-007-9273-8",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1023729544",
"https://doi.org/10.1007/s11661-007-9273-8"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11661-005-0052-0",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014449727",
"https://doi.org/10.1007/s11661-005-0052-0"
],
"type": "CreativeWork"
}
],
"datePublished": "2013-08-29",
"datePublishedReg": "2013-08-29",
"description": "An investigation was carried out on the solid-state diffusion bonding between Ti-6Al-4V (TiA) and 304 stainless steel (SS) using pure nickel (Ni) of 200-\u03bcm thickness as an intermediate material prepared in vacuum in the temperature range from 973\u00a0K to 1073\u00a0K (700\u00a0\u00b0C to 800\u00a0\u00b0C) in steps of 298\u00a0K (25\u00a0\u00b0C) using uniaxial compressive pressure of 3\u00a0MPa and 60\u00a0minutes as bonding time. Scanning electron microscopy images, in backscattered electron mode, had revealed existence of layerwise Ti-Ni-based intermetallics such as either Ni3Ti or both Ni3Ti and NiTi at titanium alloy-nickel (TiA/Ni) interface, whereas nickel-stainless steel (Ni/SS) diffusion zone was free from intermetallic phases for all joints processed. Chemical composition of the reaction layers was determined in atomic percentage by energy dispersive spectroscopy and confirmed by X-ray diffraction study. Room-temperature properties of the bonded joints were characterized using microhardness evaluation and tensile testing. The maximum hardness value of ~800\u00a0HV was observed at TiA/Ni interface for the bond processed at 1073\u00a0K (800\u00a0\u00b0C). The hardness value at Ni/SS interface for all the bonds was found to be ~330\u00a0HV. Maximum tensile strength of ~206\u00a0MPa along with ~2.9 pct ductility was obtained for the joint processed at 1023\u00a0K (750\u00a0\u00b0C). It was observed from the activation study that the diffusion rate at TiA/Ni interface is lesser than that at the Ni/SS interface. From microhardness profile, fractured surfaces and fracture path, it was demonstrated that failure of the joints was initiated and propagated apparently at the TiA/Ni interface near Ni3Ti intermetallic phase.",
"genre": "article",
"id": "sg:pub.10.1007/s11661-013-1940-3",
"inLanguage": "en",
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1136292",
"issn": [
"1073-5623",
"1543-1940"
],
"name": "Metallurgical and Materials Transactions A",
"publisher": "Springer Nature",
"type": "Periodical"
},
{
"issueNumber": "4",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "45"
}
],
"keywords": [
"Ni/SS interface",
"stainless steel",
"Ni interface",
"SS interface",
"hardness values",
"intermetallic phases",
"solid-state diffusion bonding",
"Ni3Ti intermetallic phases",
"diffusion-bonded joints",
"Ti-6Al-4V",
"intermediate materials",
"maximum hardness value",
"uniaxial compressive pressure",
"room temperature properties",
"maximum tensile strength",
"energy dispersive spectroscopy",
"pct ductility",
"diffusion bonding",
"bonding temperature",
"microhardness profiles",
"fracture path",
"mechanical properties",
"reaction layer",
"tensile testing",
"electron microscopy images",
"tensile strength",
"compressive pressure",
"Ti\u2013Ni",
"diffusion zone",
"interfacial reaction",
"backscattered electron mode",
"electron mode",
"pure nickel",
"dispersive spectroscopy",
"microhardness evaluation",
"atomic percentage",
"ray diffraction studies",
"steel",
"Ni3Ti",
"temperature range",
"MPa",
"HV",
"diffusion rate",
"microscopy images",
"interface",
"diffraction studies",
"joints",
"nickel",
"ductility",
"materials",
"chemical composition",
"NiTi",
"intermetallics",
"properties",
"vacuum",
"thickness",
"layer",
"phase",
"spectroscopy",
"temperature",
"strength",
"surface",
"bonds",
"bonding",
"mode",
"pressure",
"zone",
"values",
"range",
"path",
"investigation",
"composition",
"existence",
"testing",
"step",
"images",
"activation studies",
"failure",
"profile",
"time",
"effect",
"rate",
"study",
"reaction",
"evaluation",
"percentage",
"minutes"
],
"name": "Effect of Bonding Temperature on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material",
"pagination": "2067-2077",
"productId": [
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1024564875"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s11661-013-1940-3"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s11661-013-1940-3",
"https://app.dimensions.ai/details/publication/pub.1024564875"
],
"sdDataset": "articles",
"sdDatePublished": "2022-05-20T07:28",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-springernature-scigraph/baseset/20220519/entities/gbq_results/article/article_584.jsonl",
"type": "ScholarlyArticle",
"url": "https://doi.org/10.1007/s11661-013-1940-3"
}
]
Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11661-013-1940-3'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11661-013-1940-3'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11661-013-1940-3'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11661-013-1940-3'
This table displays all metadata directly associated to this object as RDF triples.
198 TRIPLES
22 PREDICATES
119 URIs
104 LITERALS
6 BLANK NODES
Subject | Predicate | Object | |
---|---|---|---|
1 | sg:pub.10.1007/s11661-013-1940-3 | schema:about | anzsrc-for:09 |
2 | ″ | ″ | anzsrc-for:0912 |
3 | ″ | schema:author | Ncb5e54f804a44286826b06a4434a1c06 |
4 | ″ | schema:citation | sg:pub.10.1007/bf00367903 |
5 | ″ | ″ | sg:pub.10.1007/bf00540018 |
6 | ″ | ″ | sg:pub.10.1007/bf02664680 |
7 | ″ | ″ | sg:pub.10.1007/s11661-005-0052-0 |
8 | ″ | ″ | sg:pub.10.1007/s11661-007-9273-8 |
9 | ″ | ″ | sg:pub.10.1007/s11661-012-1553-2 |
10 | ″ | ″ | sg:pub.10.1023/a:1018694106588 |
11 | ″ | schema:datePublished | 2013-08-29 |
12 | ″ | schema:datePublishedReg | 2013-08-29 |
13 | ″ | schema:description | An investigation was carried out on the solid-state diffusion bonding between Ti-6Al-4V (TiA) and 304 stainless steel (SS) using pure nickel (Ni) of 200-μm thickness as an intermediate material prepared in vacuum in the temperature range from 973 K to 1073 K (700 °C to 800 °C) in steps of 298 K (25 °C) using uniaxial compressive pressure of 3 MPa and 60 minutes as bonding time. Scanning electron microscopy images, in backscattered electron mode, had revealed existence of layerwise Ti-Ni-based intermetallics such as either Ni3Ti or both Ni3Ti and NiTi at titanium alloy-nickel (TiA/Ni) interface, whereas nickel-stainless steel (Ni/SS) diffusion zone was free from intermetallic phases for all joints processed. Chemical composition of the reaction layers was determined in atomic percentage by energy dispersive spectroscopy and confirmed by X-ray diffraction study. Room-temperature properties of the bonded joints were characterized using microhardness evaluation and tensile testing. The maximum hardness value of ~800 HV was observed at TiA/Ni interface for the bond processed at 1073 K (800 °C). The hardness value at Ni/SS interface for all the bonds was found to be ~330 HV. Maximum tensile strength of ~206 MPa along with ~2.9 pct ductility was obtained for the joint processed at 1023 K (750 °C). It was observed from the activation study that the diffusion rate at TiA/Ni interface is lesser than that at the Ni/SS interface. From microhardness profile, fractured surfaces and fracture path, it was demonstrated that failure of the joints was initiated and propagated apparently at the TiA/Ni interface near Ni3Ti intermetallic phase. |
14 | ″ | schema:genre | article |
15 | ″ | schema:inLanguage | en |
16 | ″ | schema:isAccessibleForFree | false |
17 | ″ | schema:isPartOf | N4a55e4a418834716ae6cde0b1b8329fc |
18 | ″ | ″ | N9c43de3c1b86406f8529a14c6d0a8a6d |
19 | ″ | ″ | sg:journal.1136292 |
20 | ″ | schema:keywords | HV |
21 | ″ | ″ | MPa |
22 | ″ | ″ | Ni interface |
23 | ″ | ″ | Ni/SS interface |
24 | ″ | ″ | Ni3Ti |
25 | ″ | ″ | Ni3Ti intermetallic phases |
26 | ″ | ″ | NiTi |
27 | ″ | ″ | SS interface |
28 | ″ | ″ | Ti-6Al-4V |
29 | ″ | ″ | Ti–Ni |
30 | ″ | ″ | activation studies |
31 | ″ | ″ | atomic percentage |
32 | ″ | ″ | backscattered electron mode |
33 | ″ | ″ | bonding |
34 | ″ | ″ | bonding temperature |
35 | ″ | ″ | bonds |
36 | ″ | ″ | chemical composition |
37 | ″ | ″ | composition |
38 | ″ | ″ | compressive pressure |
39 | ″ | ″ | diffraction studies |
40 | ″ | ″ | diffusion bonding |
41 | ″ | ″ | diffusion rate |
42 | ″ | ″ | diffusion zone |
43 | ″ | ″ | diffusion-bonded joints |
44 | ″ | ″ | dispersive spectroscopy |
45 | ″ | ″ | ductility |
46 | ″ | ″ | effect |
47 | ″ | ″ | electron microscopy images |
48 | ″ | ″ | electron mode |
49 | ″ | ″ | energy dispersive spectroscopy |
50 | ″ | ″ | evaluation |
51 | ″ | ″ | existence |
52 | ″ | ″ | failure |
53 | ″ | ″ | fracture path |
54 | ″ | ″ | hardness values |
55 | ″ | ″ | images |
56 | ″ | ″ | interface |
57 | ″ | ″ | interfacial reaction |
58 | ″ | ″ | intermediate materials |
59 | ″ | ″ | intermetallic phases |
60 | ″ | ″ | intermetallics |
61 | ″ | ″ | investigation |
62 | ″ | ″ | joints |
63 | ″ | ″ | layer |
64 | ″ | ″ | materials |
65 | ″ | ″ | maximum hardness value |
66 | ″ | ″ | maximum tensile strength |
67 | ″ | ″ | mechanical properties |
68 | ″ | ″ | microhardness evaluation |
69 | ″ | ″ | microhardness profiles |
70 | ″ | ″ | microscopy images |
71 | ″ | ″ | minutes |
72 | ″ | ″ | mode |
73 | ″ | ″ | nickel |
74 | ″ | ″ | path |
75 | ″ | ″ | pct ductility |
76 | ″ | ″ | percentage |
77 | ″ | ″ | phase |
78 | ″ | ″ | pressure |
79 | ″ | ″ | profile |
80 | ″ | ″ | properties |
81 | ″ | ″ | pure nickel |
82 | ″ | ″ | range |
83 | ″ | ″ | rate |
84 | ″ | ″ | ray diffraction studies |
85 | ″ | ″ | reaction |
86 | ″ | ″ | reaction layer |
87 | ″ | ″ | room temperature properties |
88 | ″ | ″ | solid-state diffusion bonding |
89 | ″ | ″ | spectroscopy |
90 | ″ | ″ | stainless steel |
91 | ″ | ″ | steel |
92 | ″ | ″ | step |
93 | ″ | ″ | strength |
94 | ″ | ″ | study |
95 | ″ | ″ | surface |
96 | ″ | ″ | temperature |
97 | ″ | ″ | temperature range |
98 | ″ | ″ | tensile strength |
99 | ″ | ″ | tensile testing |
100 | ″ | ″ | testing |
101 | ″ | ″ | thickness |
102 | ″ | ″ | time |
103 | ″ | ″ | uniaxial compressive pressure |
104 | ″ | ″ | vacuum |
105 | ″ | ″ | values |
106 | ″ | ″ | zone |
107 | ″ | schema:name | Effect of Bonding Temperature on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material |
108 | ″ | schema:pagination | 2067-2077 |
109 | ″ | schema:productId | Na110e471966142da931abc1507340e34 |
110 | ″ | ″ | Naf4285b42d594c46ab75977ffc8150d1 |
111 | ″ | schema:sameAs | https://app.dimensions.ai/details/publication/pub.1024564875 |
112 | ″ | ″ | https://doi.org/10.1007/s11661-013-1940-3 |
113 | ″ | schema:sdDatePublished | 2022-05-20T07:28 |
114 | ″ | schema:sdLicense | https://scigraph.springernature.com/explorer/license/ |
115 | ″ | schema:sdPublisher | N20c4e182a9474cc884ae03620dcbd6b1 |
116 | ″ | schema:url | https://doi.org/10.1007/s11661-013-1940-3 |
117 | ″ | sgo:license | sg:explorer/license/ |
118 | ″ | sgo:sdDataset | articles |
119 | ″ | rdf:type | schema:ScholarlyArticle |
120 | N1cbfa150e2c04b199fac151148fcc9f1 | rdf:first | sg:person.012640625735.37 |
121 | ″ | rdf:rest | Nf8cddb7d1ae44d2faec62b424defb3a2 |
122 | N20c4e182a9474cc884ae03620dcbd6b1 | schema:name | Springer Nature - SN SciGraph project |
123 | ″ | rdf:type | schema:Organization |
124 | N4a55e4a418834716ae6cde0b1b8329fc | schema:volumeNumber | 45 |
125 | ″ | rdf:type | schema:PublicationVolume |
126 | N9c43de3c1b86406f8529a14c6d0a8a6d | schema:issueNumber | 4 |
127 | ″ | rdf:type | schema:PublicationIssue |
128 | Na110e471966142da931abc1507340e34 | schema:name | doi |
129 | ″ | schema:value | 10.1007/s11661-013-1940-3 |
130 | ″ | rdf:type | schema:PropertyValue |
131 | Naf4285b42d594c46ab75977ffc8150d1 | schema:name | dimensions_id |
132 | ″ | schema:value | pub.1024564875 |
133 | ″ | rdf:type | schema:PropertyValue |
134 | Ncb5e54f804a44286826b06a4434a1c06 | rdf:first | sg:person.012537775655.66 |
135 | ″ | rdf:rest | N1cbfa150e2c04b199fac151148fcc9f1 |
136 | Nf8cddb7d1ae44d2faec62b424defb3a2 | rdf:first | sg:person.01022526340.57 |
137 | ″ | rdf:rest | Nfc372784c0db474a86e0541161be13ce |
138 | Nfc372784c0db474a86e0541161be13ce | rdf:first | sg:person.016424110335.47 |
139 | ″ | rdf:rest | rdf:nil |
140 | anzsrc-for:09 | schema:inDefinedTermSet | anzsrc-for: |
141 | ″ | schema:name | Engineering |
142 | ″ | rdf:type | schema:DefinedTerm |
143 | anzsrc-for:0912 | schema:inDefinedTermSet | anzsrc-for: |
144 | ″ | schema:name | Materials Engineering |
145 | ″ | rdf:type | schema:DefinedTerm |
146 | sg:journal.1136292 | schema:issn | 1073-5623 |
147 | ″ | ″ | 1543-1940 |
148 | ″ | schema:name | Metallurgical and Materials Transactions A |
149 | ″ | schema:publisher | Springer Nature |
150 | ″ | rdf:type | schema:Periodical |
151 | sg:person.01022526340.57 | schema:affiliation | grid-institutes:grid.254549.b |
152 | ″ | schema:familyName | Mishra |
153 | ″ | schema:givenName | Brajendra |
154 | ″ | schema:sameAs | https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01022526340.57 |
155 | ″ | rdf:type | schema:Person |
156 | sg:person.012537775655.66 | schema:affiliation | grid-institutes:grid.440667.7 |
157 | ″ | schema:familyName | Thirunavukarasu |
158 | ″ | schema:givenName | Gopinath |
159 | ″ | schema:sameAs | https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012537775655.66 |
160 | ″ | rdf:type | schema:Person |
161 | sg:person.012640625735.37 | schema:affiliation | grid-institutes:grid.254549.b |
162 | ″ | schema:familyName | Kundu |
163 | ″ | schema:givenName | Sukumar |
164 | ″ | schema:sameAs | https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012640625735.37 |
165 | ″ | rdf:type | schema:Person |
166 | sg:person.016424110335.47 | schema:affiliation | grid-institutes:grid.440667.7 |
167 | ″ | schema:familyName | Chatterjee |
168 | ″ | schema:givenName | Subrata |
169 | ″ | schema:sameAs | https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016424110335.47 |
170 | ″ | rdf:type | schema:Person |
171 | sg:pub.10.1007/bf00367903 | schema:sameAs | https://app.dimensions.ai/details/publication/pub.1001616107 |
172 | ″ | ″ | https://doi.org/10.1007/bf00367903 |
173 | ″ | rdf:type | schema:CreativeWork |
174 | sg:pub.10.1007/bf00540018 | schema:sameAs | https://app.dimensions.ai/details/publication/pub.1043130700 |
175 | ″ | ″ | https://doi.org/10.1007/bf00540018 |
176 | ″ | rdf:type | schema:CreativeWork |
177 | sg:pub.10.1007/bf02664680 | schema:sameAs | https://app.dimensions.ai/details/publication/pub.1015316934 |
178 | ″ | ″ | https://doi.org/10.1007/bf02664680 |
179 | ″ | rdf:type | schema:CreativeWork |
180 | sg:pub.10.1007/s11661-005-0052-0 | schema:sameAs | https://app.dimensions.ai/details/publication/pub.1014449727 |
181 | ″ | ″ | https://doi.org/10.1007/s11661-005-0052-0 |
182 | ″ | rdf:type | schema:CreativeWork |
183 | sg:pub.10.1007/s11661-007-9273-8 | schema:sameAs | https://app.dimensions.ai/details/publication/pub.1023729544 |
184 | ″ | ″ | https://doi.org/10.1007/s11661-007-9273-8 |
185 | ″ | rdf:type | schema:CreativeWork |
186 | sg:pub.10.1007/s11661-012-1553-2 | schema:sameAs | https://app.dimensions.ai/details/publication/pub.1036338329 |
187 | ″ | ″ | https://doi.org/10.1007/s11661-012-1553-2 |
188 | ″ | rdf:type | schema:CreativeWork |
189 | sg:pub.10.1023/a:1018694106588 | schema:sameAs | https://app.dimensions.ai/details/publication/pub.1002550592 |
190 | ″ | ″ | https://doi.org/10.1023/a:1018694106588 |
191 | ″ | rdf:type | schema:CreativeWork |
192 | grid-institutes:grid.254549.b | schema:alternateName | Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA |
193 | ″ | schema:name | Department of Metallurgical and Materials Engineering, Colorado School of Mines, 80401, Golden, CO, USA |
194 | ″ | ″ | Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, 711103, Howrah, West Bengal, India |
195 | ″ | rdf:type | schema:Organization |
196 | grid-institutes:grid.440667.7 | schema:alternateName | Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, 711103, Howrah, West Bengal, India |
197 | ″ | schema:name | Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, 711103, Howrah, West Bengal, India |
198 | ″ | rdf:type | schema:Organization |