Analytical method for softness abrasive flow field based on discrete phase model View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2010-10

AUTHORS

ShiMing Ji, FengQing Xiao, DaPeng Tan

ABSTRACT

Aiming at the problem of difficult contact finishing for mini structural surface in course of mould manufacturing, a new no-tool precision machining method based on soft abrasive flow machining (SAFM) was proposed. It allocated restrained component near surface machined, constituted restrained abrasive flow passage, and made the surface become a segment of passage wall. It could control turbulence abrasive flow in restrained passage, realize micro cutting for passage wall, and utilize the irregular motion of abrasive flow to eliminate the mono-directional marks on machined surfaces, and the precision could reach the specular level. A two-phase dynamic model of abrasive flow oriented to SAFM combined with discrete phase model (DPM) was established, the law of two-phase flow motion and the related physical parameters was obtained by corresponding numerical simulation method, and the mechanism of precision machining in SAFM was discussed. Simulation results show that the abrasive flow machining process mainly appears as translation of ablating location with the influence by granular pressure, and as the variation of machining efficiency with the influence by near-wall particle velocity. Thus via control of the inlet velocity and its corresponding machining time, it is supposed to work out the machining process according to the machining requirements by using the Preston equation to seek the relationship among velocity, pressure and material removing rate. By tracking near-wall particles, it can be confirmed that the movement of near-wall abrasive particles is similar to stream-wise vortices. The cutting traces on workpiece surfaces assume disorderly arrangement, so the feasibility of the SAFM method can be reaffirmed. More... »

PAGES

2867-2877

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s11431-010-4046-9

DOI

http://dx.doi.org/10.1007/s11431-010-4046-9

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1024609296


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0910", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Manufacturing Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Zhejiang University of Technology", 
          "id": "https://www.grid.ac/institutes/grid.469325.f", 
          "name": [
            "Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology, (Zhejiang University of Technology), Ministry of Education, 310014, Hangzhou, China", 
            "Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology of Zhejiang Province, 310014, Hangzhou, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Ji", 
        "givenName": "ShiMing", 
        "id": "sg:person.01046153163.59", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01046153163.59"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Zhejiang University of Technology", 
          "id": "https://www.grid.ac/institutes/grid.469325.f", 
          "name": [
            "Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology, (Zhejiang University of Technology), Ministry of Education, 310014, Hangzhou, China", 
            "Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology of Zhejiang Province, 310014, Hangzhou, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Xiao", 
        "givenName": "FengQing", 
        "id": "sg:person.016546503037.10", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016546503037.10"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Zhejiang University of Technology", 
          "id": "https://www.grid.ac/institutes/grid.469325.f", 
          "name": [
            "Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology, (Zhejiang University of Technology), Ministry of Education, 310014, Hangzhou, China", 
            "Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology of Zhejiang Province, 310014, Hangzhou, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Tan", 
        "givenName": "DaPeng", 
        "id": "sg:person.012130642732.30", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012130642732.30"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/0301-9322(93)90093-a", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1002424527"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0301-9322(93)90093-a", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1002424527"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11431-008-0138-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003262505", 
          "https://doi.org/10.1007/s11431-008-0138-1"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0041-624x(97)00147-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005301076"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0017-9310(81)90220-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005636208"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0017-9310(81)90220-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005636208"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0921-5093(00)00668-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1008110897"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02412797", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021048388", 
          "https://doi.org/10.1007/bf02412797"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02412797", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021048388", 
          "https://doi.org/10.1007/bf02412797"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0924-0136(91)90210-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022177795"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0924-0136(91)90210-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022177795"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1117/1.1489677", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024825037"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11431-007-0075-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1025009152", 
          "https://doi.org/10.1007/s11431-007-0075-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0017-9310(87)90139-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027407421"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0017-9310(87)90139-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027407421"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0360-1285(96)00006-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032029206"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0890-6955(99)00114-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1039345644"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijmachtools.2007.09.004", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1039350869"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ces.2008.01.031", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1039580709"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1017/s0022112079001191", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1053824894"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1115/1.3241835", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1062110542"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1142/9789812817822_0042", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1096082485"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2010-10", 
    "datePublishedReg": "2010-10-01", 
    "description": "Aiming at the problem of difficult contact finishing for mini structural surface in course of mould manufacturing, a new no-tool precision machining method based on soft abrasive flow machining (SAFM) was proposed. It allocated restrained component near surface machined, constituted restrained abrasive flow passage, and made the surface become a segment of passage wall. It could control turbulence abrasive flow in restrained passage, realize micro cutting for passage wall, and utilize the irregular motion of abrasive flow to eliminate the mono-directional marks on machined surfaces, and the precision could reach the specular level. A two-phase dynamic model of abrasive flow oriented to SAFM combined with discrete phase model (DPM) was established, the law of two-phase flow motion and the related physical parameters was obtained by corresponding numerical simulation method, and the mechanism of precision machining in SAFM was discussed. Simulation results show that the abrasive flow machining process mainly appears as translation of ablating location with the influence by granular pressure, and as the variation of machining efficiency with the influence by near-wall particle velocity. Thus via control of the inlet velocity and its corresponding machining time, it is supposed to work out the machining process according to the machining requirements by using the Preston equation to seek the relationship among velocity, pressure and material removing rate. By tracking near-wall particles, it can be confirmed that the movement of near-wall abrasive particles is similar to stream-wise vortices. The cutting traces on workpiece surfaces assume disorderly arrangement, so the feasibility of the SAFM method can be reaffirmed.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s11431-010-4046-9", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1134340", 
        "issn": [
          "1674-7321", 
          "1869-1900"
        ], 
        "name": "Science China Technological Sciences", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "10", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "53"
      }
    ], 
    "name": "Analytical method for softness abrasive flow field based on discrete phase model", 
    "pagination": "2867-2877", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "753d24bc473534849b177bb96d263db2d6a7780c2dd3b5af52beab71f069f582"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s11431-010-4046-9"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1024609296"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s11431-010-4046-9", 
      "https://app.dimensions.ai/details/publication/pub.1024609296"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T10:54", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000351_0000000351/records_43256_00000000.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1007%2Fs11431-010-4046-9"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11431-010-4046-9'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11431-010-4046-9'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11431-010-4046-9'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11431-010-4046-9'


 

This table displays all metadata directly associated to this object as RDF triples.

130 TRIPLES      21 PREDICATES      44 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s11431-010-4046-9 schema:about anzsrc-for:09
2 anzsrc-for:0910
3 schema:author Na50bdd1fdca842378b5f19122d7f2c92
4 schema:citation sg:pub.10.1007/bf02412797
5 sg:pub.10.1007/s11431-007-0075-4
6 sg:pub.10.1007/s11431-008-0138-1
7 https://doi.org/10.1016/0017-9310(81)90220-9
8 https://doi.org/10.1016/0017-9310(87)90139-6
9 https://doi.org/10.1016/0301-9322(93)90093-a
10 https://doi.org/10.1016/0924-0136(91)90210-6
11 https://doi.org/10.1016/j.ces.2008.01.031
12 https://doi.org/10.1016/j.ijmachtools.2007.09.004
13 https://doi.org/10.1016/s0041-624x(97)00147-9
14 https://doi.org/10.1016/s0360-1285(96)00006-8
15 https://doi.org/10.1016/s0890-6955(99)00114-5
16 https://doi.org/10.1016/s0921-5093(00)00668-7
17 https://doi.org/10.1017/s0022112079001191
18 https://doi.org/10.1115/1.3241835
19 https://doi.org/10.1117/1.1489677
20 https://doi.org/10.1142/9789812817822_0042
21 schema:datePublished 2010-10
22 schema:datePublishedReg 2010-10-01
23 schema:description Aiming at the problem of difficult contact finishing for mini structural surface in course of mould manufacturing, a new no-tool precision machining method based on soft abrasive flow machining (SAFM) was proposed. It allocated restrained component near surface machined, constituted restrained abrasive flow passage, and made the surface become a segment of passage wall. It could control turbulence abrasive flow in restrained passage, realize micro cutting for passage wall, and utilize the irregular motion of abrasive flow to eliminate the mono-directional marks on machined surfaces, and the precision could reach the specular level. A two-phase dynamic model of abrasive flow oriented to SAFM combined with discrete phase model (DPM) was established, the law of two-phase flow motion and the related physical parameters was obtained by corresponding numerical simulation method, and the mechanism of precision machining in SAFM was discussed. Simulation results show that the abrasive flow machining process mainly appears as translation of ablating location with the influence by granular pressure, and as the variation of machining efficiency with the influence by near-wall particle velocity. Thus via control of the inlet velocity and its corresponding machining time, it is supposed to work out the machining process according to the machining requirements by using the Preston equation to seek the relationship among velocity, pressure and material removing rate. By tracking near-wall particles, it can be confirmed that the movement of near-wall abrasive particles is similar to stream-wise vortices. The cutting traces on workpiece surfaces assume disorderly arrangement, so the feasibility of the SAFM method can be reaffirmed.
24 schema:genre research_article
25 schema:inLanguage en
26 schema:isAccessibleForFree false
27 schema:isPartOf Nb675b98bf6f14b5da899df6a7dcd65f3
28 Ne3868b9d21804dbe97b811cd9b230793
29 sg:journal.1134340
30 schema:name Analytical method for softness abrasive flow field based on discrete phase model
31 schema:pagination 2867-2877
32 schema:productId N34be7edc4922493882d53f75b5d67f5b
33 N53198a2746274487b929f7fc5047e26e
34 N9f5729b2e6494dd787bfb3e64a1b89c8
35 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024609296
36 https://doi.org/10.1007/s11431-010-4046-9
37 schema:sdDatePublished 2019-04-11T10:54
38 schema:sdLicense https://scigraph.springernature.com/explorer/license/
39 schema:sdPublisher N820a4cbcdd514bc08b2f80636ae7489c
40 schema:url http://link.springer.com/10.1007%2Fs11431-010-4046-9
41 sgo:license sg:explorer/license/
42 sgo:sdDataset articles
43 rdf:type schema:ScholarlyArticle
44 N1c2f97b56e2849d3a797e10d466a8cd3 rdf:first sg:person.012130642732.30
45 rdf:rest rdf:nil
46 N34be7edc4922493882d53f75b5d67f5b schema:name doi
47 schema:value 10.1007/s11431-010-4046-9
48 rdf:type schema:PropertyValue
49 N53198a2746274487b929f7fc5047e26e schema:name dimensions_id
50 schema:value pub.1024609296
51 rdf:type schema:PropertyValue
52 N61a002e9bad349b5b5bb0e075fa8ebd5 rdf:first sg:person.016546503037.10
53 rdf:rest N1c2f97b56e2849d3a797e10d466a8cd3
54 N820a4cbcdd514bc08b2f80636ae7489c schema:name Springer Nature - SN SciGraph project
55 rdf:type schema:Organization
56 N9f5729b2e6494dd787bfb3e64a1b89c8 schema:name readcube_id
57 schema:value 753d24bc473534849b177bb96d263db2d6a7780c2dd3b5af52beab71f069f582
58 rdf:type schema:PropertyValue
59 Na50bdd1fdca842378b5f19122d7f2c92 rdf:first sg:person.01046153163.59
60 rdf:rest N61a002e9bad349b5b5bb0e075fa8ebd5
61 Nb675b98bf6f14b5da899df6a7dcd65f3 schema:issueNumber 10
62 rdf:type schema:PublicationIssue
63 Ne3868b9d21804dbe97b811cd9b230793 schema:volumeNumber 53
64 rdf:type schema:PublicationVolume
65 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
66 schema:name Engineering
67 rdf:type schema:DefinedTerm
68 anzsrc-for:0910 schema:inDefinedTermSet anzsrc-for:
69 schema:name Manufacturing Engineering
70 rdf:type schema:DefinedTerm
71 sg:journal.1134340 schema:issn 1674-7321
72 1869-1900
73 schema:name Science China Technological Sciences
74 rdf:type schema:Periodical
75 sg:person.01046153163.59 schema:affiliation https://www.grid.ac/institutes/grid.469325.f
76 schema:familyName Ji
77 schema:givenName ShiMing
78 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01046153163.59
79 rdf:type schema:Person
80 sg:person.012130642732.30 schema:affiliation https://www.grid.ac/institutes/grid.469325.f
81 schema:familyName Tan
82 schema:givenName DaPeng
83 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012130642732.30
84 rdf:type schema:Person
85 sg:person.016546503037.10 schema:affiliation https://www.grid.ac/institutes/grid.469325.f
86 schema:familyName Xiao
87 schema:givenName FengQing
88 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016546503037.10
89 rdf:type schema:Person
90 sg:pub.10.1007/bf02412797 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021048388
91 https://doi.org/10.1007/bf02412797
92 rdf:type schema:CreativeWork
93 sg:pub.10.1007/s11431-007-0075-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025009152
94 https://doi.org/10.1007/s11431-007-0075-4
95 rdf:type schema:CreativeWork
96 sg:pub.10.1007/s11431-008-0138-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003262505
97 https://doi.org/10.1007/s11431-008-0138-1
98 rdf:type schema:CreativeWork
99 https://doi.org/10.1016/0017-9310(81)90220-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005636208
100 rdf:type schema:CreativeWork
101 https://doi.org/10.1016/0017-9310(87)90139-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027407421
102 rdf:type schema:CreativeWork
103 https://doi.org/10.1016/0301-9322(93)90093-a schema:sameAs https://app.dimensions.ai/details/publication/pub.1002424527
104 rdf:type schema:CreativeWork
105 https://doi.org/10.1016/0924-0136(91)90210-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022177795
106 rdf:type schema:CreativeWork
107 https://doi.org/10.1016/j.ces.2008.01.031 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039580709
108 rdf:type schema:CreativeWork
109 https://doi.org/10.1016/j.ijmachtools.2007.09.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039350869
110 rdf:type schema:CreativeWork
111 https://doi.org/10.1016/s0041-624x(97)00147-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005301076
112 rdf:type schema:CreativeWork
113 https://doi.org/10.1016/s0360-1285(96)00006-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032029206
114 rdf:type schema:CreativeWork
115 https://doi.org/10.1016/s0890-6955(99)00114-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039345644
116 rdf:type schema:CreativeWork
117 https://doi.org/10.1016/s0921-5093(00)00668-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008110897
118 rdf:type schema:CreativeWork
119 https://doi.org/10.1017/s0022112079001191 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053824894
120 rdf:type schema:CreativeWork
121 https://doi.org/10.1115/1.3241835 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062110542
122 rdf:type schema:CreativeWork
123 https://doi.org/10.1117/1.1489677 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024825037
124 rdf:type schema:CreativeWork
125 https://doi.org/10.1142/9789812817822_0042 schema:sameAs https://app.dimensions.ai/details/publication/pub.1096082485
126 rdf:type schema:CreativeWork
127 https://www.grid.ac/institutes/grid.469325.f schema:alternateName Zhejiang University of Technology
128 schema:name Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology of Zhejiang Province, 310014, Hangzhou, China
129 Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology, (Zhejiang University of Technology), Ministry of Education, 310014, Hangzhou, China
130 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...