A novel method for making ultra-fine metal fibers and particles View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2014-07

AUTHORS

Gang Chen, XiaoHong Zhang, JinLiang Qiao

ABSTRACT

A novel method based on plastic processing and equipment for preparing ultra-fine metal fibers and particles is reported. With this new method, metal fibers and particles can both be produced on the same equipment and the surfaces of the fibers and particles can be protected from oxidation by the polymers or solvents during the preparation process. Metal-alloy powders with lower melt point were filled into polymer by an extruder, followed by a die-drawing process at a temperature lower than the melt temperature of the metal alloy. Metal fibers or particles were obtained after the polymer matrix was washed away. Metal alloy fibers can be obtained when a polymer that strongly interacts with metal alloy, such as a special polyvinyl alcohol with a low alcoholysis degree, is used as the polymer matrix. Metal-alloy particles can be obtained when a polymer with weak interaction with metal alloy, such as polyethylene (PE), is used as the polymer matrix. Based on the principle of this new method, it is possible to produce finer or even nano-sized metal fibers and particles with higher melting points. More... »

PAGES

1053-1056

References to SciGraph publications

Journal

TITLE

Science China Chemistry

ISSUE

7

VOLUME

57

Author Affiliations

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s11426-014-5131-x

DOI

http://dx.doi.org/10.1007/s11426-014-5131-x

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1031684108


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Sinopec (China)", 
          "id": "https://www.grid.ac/institutes/grid.418531.a", 
          "name": [
            "College of Materials Science and Engineering, Beijing University of Chemical Technology, 100029, Beijing, China", 
            "SINOPEC Beijing Research Institute of Chemical Industry, 100013, Beijing, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Chen", 
        "givenName": "Gang", 
        "id": "sg:person.015366257313.46", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015366257313.46"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Sinopec (China)", 
          "id": "https://www.grid.ac/institutes/grid.418531.a", 
          "name": [
            "SINOPEC Beijing Research Institute of Chemical Industry, 100013, Beijing, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Zhang", 
        "givenName": "XiaoHong", 
        "id": "sg:person.011014420761.10", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011014420761.10"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Sinopec (China)", 
          "id": "https://www.grid.ac/institutes/grid.418531.a", 
          "name": [
            "College of Materials Science and Engineering, Beijing University of Chemical Technology, 100029, Beijing, China", 
            "SINOPEC Beijing Research Institute of Chemical Industry, 100013, Beijing, China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Qiao", 
        "givenName": "JinLiang", 
        "id": "sg:person.07535706361.70", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07535706361.70"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1002/1521-4095(20021002)14:19<1413::aid-adma1413>3.0.co;2-l", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1001273143"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.matchemphys.2005.05.027", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005443482"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0894-1777(03)00039-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007403522"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0894-1777(03)00039-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007403522"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11426-013-4881-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1011734985", 
          "https://doi.org/10.1007/s11426-013-4881-1"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1038/nmat1528", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014544589", 
          "https://doi.org/10.1038/nmat1528"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1038/nmat1528", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014544589", 
          "https://doi.org/10.1038/nmat1528"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-007-1207-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016581298", 
          "https://doi.org/10.1007/s00170-007-1207-5"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-007-1207-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016581298", 
          "https://doi.org/10.1007/s00170-007-1207-5"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1038/35826", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022704048", 
          "https://doi.org/10.1038/35826"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1038/35826", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022704048", 
          "https://doi.org/10.1038/35826"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/adma.201003188", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024903673"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1039/b314868h", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026000661"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-005-0355-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035949960", 
          "https://doi.org/10.1007/s00170-005-0355-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-005-0355-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035949960", 
          "https://doi.org/10.1007/s00170-005-0355-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/nl060105l", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036348519"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/nl060105l", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036348519"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.msea.2010.05.057", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1037670492"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/nl073296g", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038175388"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/nl073296g", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038175388"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/nl050127s", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038768857"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/nl050127s", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038768857"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-012-4396-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1040690005", 
          "https://doi.org/10.1007/s00170-012-4396-5"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/cr010350j", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041760827"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/cr010350j", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041760827"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijhydene.2008.04.006", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048938444"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.actamat.2006.10.060", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1049073015"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s11106-012-9387-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1049390879", 
          "https://doi.org/10.1007/s11106-012-9387-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/1521-4095(20020104)14:1<61::aid-adma61>3.0.co;2-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1050426997"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/1521-4095(20020104)14:1<61::aid-adma61>3.0.co;2-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1050426997"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/nl2017042", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1056218690"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1021/nl2017042", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1056218690"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2014-07", 
    "datePublishedReg": "2014-07-01", 
    "description": "A novel method based on plastic processing and equipment for preparing ultra-fine metal fibers and particles is reported. With this new method, metal fibers and particles can both be produced on the same equipment and the surfaces of the fibers and particles can be protected from oxidation by the polymers or solvents during the preparation process. Metal-alloy powders with lower melt point were filled into polymer by an extruder, followed by a die-drawing process at a temperature lower than the melt temperature of the metal alloy. Metal fibers or particles were obtained after the polymer matrix was washed away. Metal alloy fibers can be obtained when a polymer that strongly interacts with metal alloy, such as a special polyvinyl alcohol with a low alcoholysis degree, is used as the polymer matrix. Metal-alloy particles can be obtained when a polymer with weak interaction with metal alloy, such as polyethylene (PE), is used as the polymer matrix. Based on the principle of this new method, it is possible to produce finer or even nano-sized metal fibers and particles with higher melting points.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s11426-014-5131-x", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1297513", 
        "issn": [
          "1674-7291", 
          "1862-2771"
        ], 
        "name": "Science China Chemistry", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "7", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "57"
      }
    ], 
    "name": "A novel method for making ultra-fine metal fibers and particles", 
    "pagination": "1053-1056", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "96f02054fab903b722d97aa6ecb315bb0cf5edd713b03b6da95fe8fa30aed772"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s11426-014-5131-x"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1031684108"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s11426-014-5131-x", 
      "https://app.dimensions.ai/details/publication/pub.1031684108"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T01:09", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8697_00000522.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1007%2Fs11426-014-5131-x"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11426-014-5131-x'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11426-014-5131-x'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11426-014-5131-x'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11426-014-5131-x'


 

This table displays all metadata directly associated to this object as RDF triples.

146 TRIPLES      21 PREDICATES      48 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s11426-014-5131-x schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author Ne9b10a888cc745019efa3b61af268d24
4 schema:citation sg:pub.10.1007/s00170-005-0355-8
5 sg:pub.10.1007/s00170-007-1207-5
6 sg:pub.10.1007/s00170-012-4396-5
7 sg:pub.10.1007/s11106-012-9387-4
8 sg:pub.10.1007/s11426-013-4881-1
9 sg:pub.10.1038/35826
10 sg:pub.10.1038/nmat1528
11 https://doi.org/10.1002/1521-4095(20020104)14:1<61::aid-adma61>3.0.co;2-y
12 https://doi.org/10.1002/1521-4095(20021002)14:19<1413::aid-adma1413>3.0.co;2-l
13 https://doi.org/10.1002/adma.201003188
14 https://doi.org/10.1016/j.actamat.2006.10.060
15 https://doi.org/10.1016/j.ijhydene.2008.04.006
16 https://doi.org/10.1016/j.matchemphys.2005.05.027
17 https://doi.org/10.1016/j.msea.2010.05.057
18 https://doi.org/10.1016/s0894-1777(03)00039-6
19 https://doi.org/10.1021/cr010350j
20 https://doi.org/10.1021/nl050127s
21 https://doi.org/10.1021/nl060105l
22 https://doi.org/10.1021/nl073296g
23 https://doi.org/10.1021/nl2017042
24 https://doi.org/10.1039/b314868h
25 schema:datePublished 2014-07
26 schema:datePublishedReg 2014-07-01
27 schema:description A novel method based on plastic processing and equipment for preparing ultra-fine metal fibers and particles is reported. With this new method, metal fibers and particles can both be produced on the same equipment and the surfaces of the fibers and particles can be protected from oxidation by the polymers or solvents during the preparation process. Metal-alloy powders with lower melt point were filled into polymer by an extruder, followed by a die-drawing process at a temperature lower than the melt temperature of the metal alloy. Metal fibers or particles were obtained after the polymer matrix was washed away. Metal alloy fibers can be obtained when a polymer that strongly interacts with metal alloy, such as a special polyvinyl alcohol with a low alcoholysis degree, is used as the polymer matrix. Metal-alloy particles can be obtained when a polymer with weak interaction with metal alloy, such as polyethylene (PE), is used as the polymer matrix. Based on the principle of this new method, it is possible to produce finer or even nano-sized metal fibers and particles with higher melting points.
28 schema:genre research_article
29 schema:inLanguage en
30 schema:isAccessibleForFree false
31 schema:isPartOf N4133ae874009422687ecaede7471939f
32 N72f592dc868d4e02839c4a647b285035
33 sg:journal.1297513
34 schema:name A novel method for making ultra-fine metal fibers and particles
35 schema:pagination 1053-1056
36 schema:productId N3e27989430f74c648cc0f9b64131564b
37 N5f47948478824b66b4c6ce9eb189a126
38 Ncf6c6fb35c554b11bfd32f51d1fa9ff2
39 schema:sameAs https://app.dimensions.ai/details/publication/pub.1031684108
40 https://doi.org/10.1007/s11426-014-5131-x
41 schema:sdDatePublished 2019-04-11T01:09
42 schema:sdLicense https://scigraph.springernature.com/explorer/license/
43 schema:sdPublisher N25b404578c6f4a36abae4416238294bd
44 schema:url http://link.springer.com/10.1007%2Fs11426-014-5131-x
45 sgo:license sg:explorer/license/
46 sgo:sdDataset articles
47 rdf:type schema:ScholarlyArticle
48 N139d7f61246e4e92a991e374da240a90 rdf:first sg:person.011014420761.10
49 rdf:rest N44d20de69c8a4f36ac8b1d9b4da7ef2e
50 N25b404578c6f4a36abae4416238294bd schema:name Springer Nature - SN SciGraph project
51 rdf:type schema:Organization
52 N3e27989430f74c648cc0f9b64131564b schema:name readcube_id
53 schema:value 96f02054fab903b722d97aa6ecb315bb0cf5edd713b03b6da95fe8fa30aed772
54 rdf:type schema:PropertyValue
55 N4133ae874009422687ecaede7471939f schema:issueNumber 7
56 rdf:type schema:PublicationIssue
57 N44d20de69c8a4f36ac8b1d9b4da7ef2e rdf:first sg:person.07535706361.70
58 rdf:rest rdf:nil
59 N5f47948478824b66b4c6ce9eb189a126 schema:name doi
60 schema:value 10.1007/s11426-014-5131-x
61 rdf:type schema:PropertyValue
62 N72f592dc868d4e02839c4a647b285035 schema:volumeNumber 57
63 rdf:type schema:PublicationVolume
64 Ncf6c6fb35c554b11bfd32f51d1fa9ff2 schema:name dimensions_id
65 schema:value pub.1031684108
66 rdf:type schema:PropertyValue
67 Ne9b10a888cc745019efa3b61af268d24 rdf:first sg:person.015366257313.46
68 rdf:rest N139d7f61246e4e92a991e374da240a90
69 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
70 schema:name Engineering
71 rdf:type schema:DefinedTerm
72 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
73 schema:name Materials Engineering
74 rdf:type schema:DefinedTerm
75 sg:journal.1297513 schema:issn 1674-7291
76 1862-2771
77 schema:name Science China Chemistry
78 rdf:type schema:Periodical
79 sg:person.011014420761.10 schema:affiliation https://www.grid.ac/institutes/grid.418531.a
80 schema:familyName Zhang
81 schema:givenName XiaoHong
82 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011014420761.10
83 rdf:type schema:Person
84 sg:person.015366257313.46 schema:affiliation https://www.grid.ac/institutes/grid.418531.a
85 schema:familyName Chen
86 schema:givenName Gang
87 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015366257313.46
88 rdf:type schema:Person
89 sg:person.07535706361.70 schema:affiliation https://www.grid.ac/institutes/grid.418531.a
90 schema:familyName Qiao
91 schema:givenName JinLiang
92 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07535706361.70
93 rdf:type schema:Person
94 sg:pub.10.1007/s00170-005-0355-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035949960
95 https://doi.org/10.1007/s00170-005-0355-8
96 rdf:type schema:CreativeWork
97 sg:pub.10.1007/s00170-007-1207-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016581298
98 https://doi.org/10.1007/s00170-007-1207-5
99 rdf:type schema:CreativeWork
100 sg:pub.10.1007/s00170-012-4396-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040690005
101 https://doi.org/10.1007/s00170-012-4396-5
102 rdf:type schema:CreativeWork
103 sg:pub.10.1007/s11106-012-9387-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049390879
104 https://doi.org/10.1007/s11106-012-9387-4
105 rdf:type schema:CreativeWork
106 sg:pub.10.1007/s11426-013-4881-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011734985
107 https://doi.org/10.1007/s11426-013-4881-1
108 rdf:type schema:CreativeWork
109 sg:pub.10.1038/35826 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022704048
110 https://doi.org/10.1038/35826
111 rdf:type schema:CreativeWork
112 sg:pub.10.1038/nmat1528 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014544589
113 https://doi.org/10.1038/nmat1528
114 rdf:type schema:CreativeWork
115 https://doi.org/10.1002/1521-4095(20020104)14:1<61::aid-adma61>3.0.co;2-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1050426997
116 rdf:type schema:CreativeWork
117 https://doi.org/10.1002/1521-4095(20021002)14:19<1413::aid-adma1413>3.0.co;2-l schema:sameAs https://app.dimensions.ai/details/publication/pub.1001273143
118 rdf:type schema:CreativeWork
119 https://doi.org/10.1002/adma.201003188 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024903673
120 rdf:type schema:CreativeWork
121 https://doi.org/10.1016/j.actamat.2006.10.060 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049073015
122 rdf:type schema:CreativeWork
123 https://doi.org/10.1016/j.ijhydene.2008.04.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048938444
124 rdf:type schema:CreativeWork
125 https://doi.org/10.1016/j.matchemphys.2005.05.027 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005443482
126 rdf:type schema:CreativeWork
127 https://doi.org/10.1016/j.msea.2010.05.057 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037670492
128 rdf:type schema:CreativeWork
129 https://doi.org/10.1016/s0894-1777(03)00039-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007403522
130 rdf:type schema:CreativeWork
131 https://doi.org/10.1021/cr010350j schema:sameAs https://app.dimensions.ai/details/publication/pub.1041760827
132 rdf:type schema:CreativeWork
133 https://doi.org/10.1021/nl050127s schema:sameAs https://app.dimensions.ai/details/publication/pub.1038768857
134 rdf:type schema:CreativeWork
135 https://doi.org/10.1021/nl060105l schema:sameAs https://app.dimensions.ai/details/publication/pub.1036348519
136 rdf:type schema:CreativeWork
137 https://doi.org/10.1021/nl073296g schema:sameAs https://app.dimensions.ai/details/publication/pub.1038175388
138 rdf:type schema:CreativeWork
139 https://doi.org/10.1021/nl2017042 schema:sameAs https://app.dimensions.ai/details/publication/pub.1056218690
140 rdf:type schema:CreativeWork
141 https://doi.org/10.1039/b314868h schema:sameAs https://app.dimensions.ai/details/publication/pub.1026000661
142 rdf:type schema:CreativeWork
143 https://www.grid.ac/institutes/grid.418531.a schema:alternateName Sinopec (China)
144 schema:name College of Materials Science and Engineering, Beijing University of Chemical Technology, 100029, Beijing, China
145 SINOPEC Beijing Research Institute of Chemical Industry, 100013, Beijing, China
146 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...