Ontology type: schema:ScholarlyArticle
2019-03
AUTHORSAnke Dalke, Anja Buchwalder, Rolf Zenker, Heinz-Joachim Spies
ABSTRACTDry sliding friction and wear behavior of nitrided and non-nitrided spray-formed Al alloys against AISI52100 steel were investigated using a linear-reciprocating ball on flat configuration under different normal loads. In case of nitrided spray-formed Al alloys, an increase in the applied normal load leads to a steady reduction of the stationary stage of the coefficient of friction depending on the sustainability of the AlN/Al compound. With regard to the nitride layer, thickness-specific wear regimes are distinguished for both spray-formed Al alloys. Nitrided spray-formed AlSi alloys show mild abrasive wear independent of normal load in case of AlN layers with up to 3 µm thickness. The layers exhibit an increased wear resistance compared to the non-nitrided condition for all applied test loads. Thick AlN layers > 4 µm show a steep increase in wear rate at loads exceeding 10 N, indicating a severe adhesive wear. These layers fail due to nitride layer delamination. Nitrided spray-formed AlMg alloys show mild abrasive wear for thin AlN layers < 4 µm up to normal loads of 12 N. Thick AlN layers almost immediately fail upon the initiation of the sliding contact due to crack formation within the nitride layer. More... »
PAGES6
http://scigraph.springernature.com/pub.10.1007/s11249-018-1122-y
DOIhttp://dx.doi.org/10.1007/s11249-018-1122-y
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1110254992
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "Freiberg University Of Mining And Technology",
"id": "https://www.grid.ac/institutes/grid.6862.a",
"name": [
"Institute of Materials Engineering, TU Bergakademie Freiberg, 09599, Freiberg, Germany"
],
"type": "Organization"
},
"familyName": "Dalke",
"givenName": "Anke",
"id": "sg:person.012333320345.87",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012333320345.87"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Freiberg University Of Mining And Technology",
"id": "https://www.grid.ac/institutes/grid.6862.a",
"name": [
"Institute of Materials Engineering, TU Bergakademie Freiberg, 09599, Freiberg, Germany"
],
"type": "Organization"
},
"familyName": "Buchwalder",
"givenName": "Anja",
"id": "sg:person.01356647611.23",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01356647611.23"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Freiberg University Of Mining And Technology",
"id": "https://www.grid.ac/institutes/grid.6862.a",
"name": [
"Institute of Materials Engineering, TU Bergakademie Freiberg, 09599, Freiberg, Germany",
"Zenker Consult, 09648, Mittweida, Germany"
],
"type": "Organization"
},
"familyName": "Zenker",
"givenName": "Rolf",
"id": "sg:person.011761532403.11",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011761532403.11"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Freiberg University Of Mining And Technology",
"id": "https://www.grid.ac/institutes/grid.6862.a",
"name": [
"Institute of Materials Engineering, TU Bergakademie Freiberg, 09599, Freiberg, Germany"
],
"type": "Organization"
},
"familyName": "Spies",
"givenName": "Heinz-Joachim",
"id": "sg:person.01215273135.07",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01215273135.07"
],
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.1179/174329406x108898",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1000410511"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.matdes.2010.05.010",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1000803937"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.actamat.2011.06.016",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1003029875"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0043-1648(03)00412-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1006348921"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0043-1648(03)00412-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1006348921"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0257-8972(00)00992-0",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1013070740"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.vacuum.2005.01.093",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014839733"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1179/026708304x11305",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1016303621"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1002/adem.201200257",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1017637143"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0924-0136(96)02740-9",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1017646660"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1179/174951409x12542264514284",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1021607201"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2012.10.007",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1023262128"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0257-8972(94)90100-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1026075964"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0257-8972(94)90100-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1026075964"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0257-8972(99)00209-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1026248305"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2006.01.025",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1026427567"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s10853-008-2464-x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030211181",
"https://doi.org/10.1007/s10853-008-2464-x"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.actamat.2008.07.043",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030219006"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2009.03.025",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1031002684"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0043-1648(70)90237-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036196092"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0043-1648(70)90237-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036196092"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2014.07.011",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036797401"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmatprotec.2009.03.009",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036798873"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s1359-6454(96)00191-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036984217"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2009.12.027",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1038832239"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2474/trol.4.115",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1038839069"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.apsusc.2015.11.245",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1039043071"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2006.03.043",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1043591234"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2010.01.008",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1047172847"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.surfcoat.2013.06.106",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1050936815"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2014.02.010",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1051594029"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2005.02.119",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1052428926"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1063/1.126070",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1057690181"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.4028/www.scientific.net/msf.690.91",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1072136375"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.wear.2016.10.025",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1086044659"
],
"type": "CreativeWork"
}
],
"datePublished": "2019-03",
"datePublishedReg": "2019-03-01",
"description": "Dry sliding friction and wear behavior of nitrided and non-nitrided spray-formed Al alloys against AISI52100 steel were investigated using a linear-reciprocating ball on flat configuration under different normal loads. In case of nitrided spray-formed Al alloys, an increase in the applied normal load leads to a steady reduction of the stationary stage of the coefficient of friction depending on the sustainability of the AlN/Al compound. With regard to the nitride layer, thickness-specific wear regimes are distinguished for both spray-formed Al alloys. Nitrided spray-formed AlSi alloys show mild abrasive wear independent of normal load in case of AlN layers with up to 3 \u00b5m thickness. The layers exhibit an increased wear resistance compared to the non-nitrided condition for all applied test loads. Thick AlN layers > 4 \u00b5m show a steep increase in wear rate at loads exceeding 10 N, indicating a severe adhesive wear. These layers fail due to nitride layer delamination. Nitrided spray-formed AlMg alloys show mild abrasive wear for thin AlN layers < 4 \u00b5m up to normal loads of 12 N. Thick AlN layers almost immediately fail upon the initiation of the sliding contact due to crack formation within the nitride layer.",
"genre": "research_article",
"id": "sg:pub.10.1007/s11249-018-1122-y",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1133987",
"issn": [
"1023-8883",
"1573-2711"
],
"name": "Tribology Letters",
"type": "Periodical"
},
{
"issueNumber": "1",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "67"
}
],
"name": "Effect of Nitride Layer Thickness on Reciprocating Sliding Wear Behavior of AlN Layers on Spray-Formed Al Alloys",
"pagination": "6",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"099c59cde2b1f2cbd9de5051426ef683460aff66a85bcee0b3f8a67fc9c1f0ea"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s11249-018-1122-y"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1110254992"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s11249-018-1122-y",
"https://app.dimensions.ai/details/publication/pub.1110254992"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-11T10:16",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000348_0000000348/records_54301_00000002.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.1007%2Fs11249-018-1122-y"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11249-018-1122-y'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11249-018-1122-y'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11249-018-1122-y'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11249-018-1122-y'
This table displays all metadata directly associated to this object as RDF triples.
180 TRIPLES
21 PREDICATES
59 URIs
19 LITERALS
7 BLANK NODES