Formation of Structure and Properties of Aluminum Alloys During Roll Casting View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2022-05

AUTHORS

A. S. El’darkhanov, A. S. Nuradinov, Yu. I. Kondrat’ev, A. I. Nuradinov

ABSTRACT

Physical and technological parameters for preparing aluminum alloy thin sheet billets in a two-roll casting and rolling unit are developed. For each stage of the production chain of roll casting + hot rolling + heat treatment the effect of hot deformation and heat treatment on the structure and properties of sheet workpieces and final rolled metal products obtained is investigated. A significant dependence is established for the level of cast strip mechanical properties on changes in structure that occur under the influence of various production factors. It is shown that for all alloys studied rolled metal strength properties reached a maximum level with twofold reduction (Σi = 50%). With a further increase in the degree of reduction rolled product strength increases insignificantly, but for high-strength alloys (D16 and V95) there is a tendency towards an increase in relative elongation. This pattern differs from that usually observed in classical heat treatment when alloy ductility decreases with an increase in strength indices. The level of mechanical properties obtained for rolled metal products for almost all alloys studied is higher than the corresponding standard values. More... »

PAGES

130-138

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s11015-022-01308-z

DOI

http://dx.doi.org/10.1007/s11015-022-01308-z

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1149183599


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Scientific Center for Latest Materials and Technologies, Moscow, Russia", 
          "id": "http://www.grid.ac/institutes/None", 
          "name": [
            "Scientific Center for Latest Materials and Technologies, Moscow, Russia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "El\u2019darkhanov", 
        "givenName": "A. S.", 
        "id": "sg:person.014723624702.85", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014723624702.85"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Physico-Technological Institute of Metals and Alloys, National Academy of Sciences of Ukraine, Kiev, Ukraine", 
          "id": "http://www.grid.ac/institutes/grid.418751.e", 
          "name": [
            "Physico-Technological Institute of Metals and Alloys, National Academy of Sciences of Ukraine, Kiev, Ukraine"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Nuradinov", 
        "givenName": "A. S.", 
        "id": "sg:person.010452420575.33", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010452420575.33"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "North Caucasian Institute of Mining and Metallurgy, State Technological University, Vladikavkaz, Russia", 
          "id": "http://www.grid.ac/institutes/grid.483964.4", 
          "name": [
            "North Caucasian Institute of Mining and Metallurgy, State Technological University, Vladikavkaz, Russia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kondrat\u2019ev", 
        "givenName": "Yu. I.", 
        "id": "sg:person.010362646604.00", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010362646604.00"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "North Caucasian Institute of Mining and Metallurgy, State Technological University, Vladikavkaz, Russia", 
          "id": "http://www.grid.ac/institutes/grid.483964.4", 
          "name": [
            "North Caucasian Institute of Mining and Metallurgy, State Technological University, Vladikavkaz, Russia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Nuradinov", 
        "givenName": "A. I.", 
        "type": "Person"
      }
    ], 
    "datePublished": "2022-05", 
    "datePublishedReg": "2022-05-01", 
    "description": "Physical and technological parameters for preparing aluminum alloy thin sheet billets in a two-roll casting and rolling unit are developed. For each stage of the production chain of roll casting + hot rolling + heat treatment the effect of hot deformation and heat treatment on the structure and properties of sheet workpieces and final rolled metal products obtained is investigated. A significant dependence is established for the level of cast strip mechanical properties on changes in structure that occur under the influence of various production factors. It is shown that for all alloys studied rolled metal strength properties reached a maximum level with twofold reduction (\u03a3i = 50%). With a further increase in the degree of reduction rolled product strength increases insignificantly, but for high-strength alloys (D16 and V95) there is a tendency towards an increase in relative elongation. This pattern differs from that usually observed in classical heat treatment when alloy ductility decreases with an increase in strength indices. The level of mechanical properties obtained for rolled metal products for almost all alloys studied is higher than the corresponding standard values.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/s11015-022-01308-z", 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1136341", 
        "issn": [
          "0026-0894", 
          "1573-8892"
        ], 
        "name": "Metallurgist", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "1-2", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "66"
      }
    ], 
    "keywords": [
      "roll casting", 
      "heat treatment", 
      "mechanical properties", 
      "metal products", 
      "high strength alloys", 
      "sheet billets", 
      "sheet workpiece", 
      "hot rolling", 
      "hot deformation", 
      "classical heat treatment", 
      "aluminum alloy", 
      "strength properties", 
      "technological parameters", 
      "alloy", 
      "strength increases", 
      "relative elongation", 
      "casting", 
      "formation of structures", 
      "strength index", 
      "properties", 
      "degree of reduction", 
      "ductility", 
      "billet", 
      "significant dependence", 
      "workpiece", 
      "rolling", 
      "further increase", 
      "corresponding standard values", 
      "standard values", 
      "deformation", 
      "aluminum", 
      "structure", 
      "production chain", 
      "elongation", 
      "reduction", 
      "parameters", 
      "increase", 
      "products", 
      "twofold reduction", 
      "influence", 
      "dependence", 
      "formation", 
      "values", 
      "units", 
      "production factors", 
      "maximum level", 
      "effect", 
      "degree", 
      "stage", 
      "levels", 
      "tendency", 
      "changes", 
      "treatment", 
      "factors", 
      "chain", 
      "index", 
      "patterns"
    ], 
    "name": "Formation of Structure and Properties of Aluminum Alloys During Roll Casting", 
    "pagination": "130-138", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1149183599"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s11015-022-01308-z"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s11015-022-01308-z", 
      "https://app.dimensions.ai/details/publication/pub.1149183599"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2022-10-01T06:50", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20221001/entities/gbq_results/article/article_936.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/s11015-022-01308-z"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s11015-022-01308-z'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s11015-022-01308-z'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s11015-022-01308-z'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s11015-022-01308-z'


 

This table displays all metadata directly associated to this object as RDF triples.

140 TRIPLES      20 PREDICATES      82 URIs      74 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s11015-022-01308-z schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author N7eb39fc036694924841a5393ce6aa1bd
4 schema:datePublished 2022-05
5 schema:datePublishedReg 2022-05-01
6 schema:description Physical and technological parameters for preparing aluminum alloy thin sheet billets in a two-roll casting and rolling unit are developed. For each stage of the production chain of roll casting + hot rolling + heat treatment the effect of hot deformation and heat treatment on the structure and properties of sheet workpieces and final rolled metal products obtained is investigated. A significant dependence is established for the level of cast strip mechanical properties on changes in structure that occur under the influence of various production factors. It is shown that for all alloys studied rolled metal strength properties reached a maximum level with twofold reduction (Σi = 50%). With a further increase in the degree of reduction rolled product strength increases insignificantly, but for high-strength alloys (D16 and V95) there is a tendency towards an increase in relative elongation. This pattern differs from that usually observed in classical heat treatment when alloy ductility decreases with an increase in strength indices. The level of mechanical properties obtained for rolled metal products for almost all alloys studied is higher than the corresponding standard values.
7 schema:genre article
8 schema:isAccessibleForFree false
9 schema:isPartOf N4010b7e9e8074e819725f7741b3dfbd0
10 N629150ba7ece433b98ed7d776f52490f
11 sg:journal.1136341
12 schema:keywords alloy
13 aluminum
14 aluminum alloy
15 billet
16 casting
17 chain
18 changes
19 classical heat treatment
20 corresponding standard values
21 deformation
22 degree
23 degree of reduction
24 dependence
25 ductility
26 effect
27 elongation
28 factors
29 formation
30 formation of structures
31 further increase
32 heat treatment
33 high strength alloys
34 hot deformation
35 hot rolling
36 increase
37 index
38 influence
39 levels
40 maximum level
41 mechanical properties
42 metal products
43 parameters
44 patterns
45 production chain
46 production factors
47 products
48 properties
49 reduction
50 relative elongation
51 roll casting
52 rolling
53 sheet billets
54 sheet workpiece
55 significant dependence
56 stage
57 standard values
58 strength increases
59 strength index
60 strength properties
61 structure
62 technological parameters
63 tendency
64 treatment
65 twofold reduction
66 units
67 values
68 workpiece
69 schema:name Formation of Structure and Properties of Aluminum Alloys During Roll Casting
70 schema:pagination 130-138
71 schema:productId N2f4f546218c14dff83612d3bd2376707
72 N47204d664c49421faca70ac249bb2179
73 schema:sameAs https://app.dimensions.ai/details/publication/pub.1149183599
74 https://doi.org/10.1007/s11015-022-01308-z
75 schema:sdDatePublished 2022-10-01T06:50
76 schema:sdLicense https://scigraph.springernature.com/explorer/license/
77 schema:sdPublisher Nc38a7ff191c74475a5bab37e5096bbdf
78 schema:url https://doi.org/10.1007/s11015-022-01308-z
79 sgo:license sg:explorer/license/
80 sgo:sdDataset articles
81 rdf:type schema:ScholarlyArticle
82 N038c33ab59f0432aa420c67abddbf365 schema:affiliation grid-institutes:grid.483964.4
83 schema:familyName Nuradinov
84 schema:givenName A. I.
85 rdf:type schema:Person
86 N1ba2fd1c7e684699b13b4a5b46bc0545 rdf:first sg:person.010362646604.00
87 rdf:rest Ndfb9cdb57a494616991a131ffb9a74f0
88 N2f4f546218c14dff83612d3bd2376707 schema:name dimensions_id
89 schema:value pub.1149183599
90 rdf:type schema:PropertyValue
91 N4010b7e9e8074e819725f7741b3dfbd0 schema:volumeNumber 66
92 rdf:type schema:PublicationVolume
93 N47204d664c49421faca70ac249bb2179 schema:name doi
94 schema:value 10.1007/s11015-022-01308-z
95 rdf:type schema:PropertyValue
96 N629150ba7ece433b98ed7d776f52490f schema:issueNumber 1-2
97 rdf:type schema:PublicationIssue
98 N7eb39fc036694924841a5393ce6aa1bd rdf:first sg:person.014723624702.85
99 rdf:rest Nb57fbdc49fbd48a88bd4bef99a8b8e35
100 Nb57fbdc49fbd48a88bd4bef99a8b8e35 rdf:first sg:person.010452420575.33
101 rdf:rest N1ba2fd1c7e684699b13b4a5b46bc0545
102 Nc38a7ff191c74475a5bab37e5096bbdf schema:name Springer Nature - SN SciGraph project
103 rdf:type schema:Organization
104 Ndfb9cdb57a494616991a131ffb9a74f0 rdf:first N038c33ab59f0432aa420c67abddbf365
105 rdf:rest rdf:nil
106 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
107 schema:name Engineering
108 rdf:type schema:DefinedTerm
109 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
110 schema:name Materials Engineering
111 rdf:type schema:DefinedTerm
112 sg:journal.1136341 schema:issn 0026-0894
113 1573-8892
114 schema:name Metallurgist
115 schema:publisher Springer Nature
116 rdf:type schema:Periodical
117 sg:person.010362646604.00 schema:affiliation grid-institutes:grid.483964.4
118 schema:familyName Kondrat’ev
119 schema:givenName Yu. I.
120 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010362646604.00
121 rdf:type schema:Person
122 sg:person.010452420575.33 schema:affiliation grid-institutes:grid.418751.e
123 schema:familyName Nuradinov
124 schema:givenName A. S.
125 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010452420575.33
126 rdf:type schema:Person
127 sg:person.014723624702.85 schema:affiliation grid-institutes:None
128 schema:familyName El’darkhanov
129 schema:givenName A. S.
130 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014723624702.85
131 rdf:type schema:Person
132 grid-institutes:None schema:alternateName Scientific Center for Latest Materials and Technologies, Moscow, Russia
133 schema:name Scientific Center for Latest Materials and Technologies, Moscow, Russia
134 rdf:type schema:Organization
135 grid-institutes:grid.418751.e schema:alternateName Physico-Technological Institute of Metals and Alloys, National Academy of Sciences of Ukraine, Kiev, Ukraine
136 schema:name Physico-Technological Institute of Metals and Alloys, National Academy of Sciences of Ukraine, Kiev, Ukraine
137 rdf:type schema:Organization
138 grid-institutes:grid.483964.4 schema:alternateName North Caucasian Institute of Mining and Metallurgy, State Technological University, Vladikavkaz, Russia
139 schema:name North Caucasian Institute of Mining and Metallurgy, State Technological University, Vladikavkaz, Russia
140 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...