In situ synthesis of ABS containing hydrophobic silica nanoparticles and their effects on mechanical properties View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2017-03

AUTHORS

Charungkit Chaikeaw, Kawee Srikulkit

ABSTRACT

In this study, in situ synthesis of acrylonitrile-butadiene-styrene rubber particles containing hydrophobic silica nanoparticles (HDTMS-silica) was carried out. Firstly, three of HDTMS-silicas (HDTMS-silica1, HDTMS-silica2, and HDTMS-silica3) were prepared by silanization of SiO2 nanoparticle with hexadecyltrimethoxysilane (HDTMS : SiO2 wt ratios of 1 : 1, 2 : 1, and 3 : 1) in an emulsion system. Then, HDTMS-silica/styrene and acrylonitrile mixture was fed into a polybutadiene latex reactor. Following that, graft copolymerization was carried out using persulfate initiator at temperature of 65 °C for 3.5 h. Thus obtained Acrylonitrile-butadiene-styrene rubber containing HDTMS-silica was melt extruded with styrene-acrylonitrile (SAN) to prepare ABS nanocomposite compound. Mechanical properties of ABS nanocomposite compounds were evaluated. It was found that all of HDTMS : SiO2 wt ratios produced hydrophobic SiO2 nanoparticles exhibiting good dispersibility in toluene test. In fact, 3 : 1 HDTMS : SiO2 showed the complete hydrophobicity modification, judged by the absence of silanol absorption band. However, the optimum mechanical properties were achieved at 2 wt% loading of 2 : 1 HDTMS: SiO2. Below 2 : 1 ratio, the HDTMS ratio was not enough to obtain the fully hydrophobic surface modification. Above 2 : 1 ratio, the excessive HDTMS ratio led to a decrease in SiO2 content judged by Si EDX mapping, causing a gradual decrease in its energy absorption and reinforcement performance. In case of 2 : 1 HDTMS : SiO2, optimum mechanical properties were achievable at 2 wt% HDTMS-SiO2 loading, resulting from the optimum dispersibility of HDTMS-SiO2 nanoparticles. Further increase in HDTMS-SiO2 loading resulted in a reverse effect due to agglomeration problem. More... »

PAGES

774-781

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s10971-016-4252-4

DOI

http://dx.doi.org/10.1007/s10971-016-4252-4

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1006475592


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Chulalongkorn University", 
          "id": "https://www.grid.ac/institutes/grid.7922.e", 
          "name": [
            "Department of Materials Science, Faculty of Science, Chulalongkorn University, Bangkok, Thailand"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Chaikeaw", 
        "givenName": "Charungkit", 
        "id": "sg:person.010623757032.01", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010623757032.01"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Chulalongkorn University", 
          "id": "https://www.grid.ac/institutes/grid.7922.e", 
          "name": [
            "Department of Materials Science, Faculty of Science, Chulalongkorn University, Bangkok, Thailand", 
            "Center of Excellence on Petrochemical and Materials Technology, Chulalongkorn University, Bangkok, Thailand"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Srikulkit", 
        "givenName": "Kawee", 
        "id": "sg:person.013147624565.07", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013147624565.07"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/j.proeng.2012.07.361", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1002027319"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10971-014-3530-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1002511586", 
          "https://doi.org/10.1007/s10971-014-3530-2"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.eurpolymj.2012.10.003", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003977949"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.polymdegradstab.2008.08.006", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005837678"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.porgcoat.2012.05.013", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1006072624"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.matdes.2013.11.060", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1011549455"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.eurpolymj.2005.08.002", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1011704283"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jiec.2008.02.002", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022483588"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0021-9797(03)00716-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023973743"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0021-9797(03)00716-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1023973743"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.matlet.2012.09.041", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024687565"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.cap.2006.01.009", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1032622833"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.colsurfa.2012.11.057", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1033234848"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.eurpolymj.2006.01.012", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034493337"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.polymertesting.2012.09.003", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034715500"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.apsusc.2011.09.074", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1035669895"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.polymer.2007.07.061", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036157349"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jcis.2006.10.005", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036469479"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.apsusc.2009.11.030", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1037057178"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.5012/bkcs.2013.34.9.2747", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1039337412"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.compositesb.2011.02.008", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042617132"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.clay.2012.04.024", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1045662680"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.apsusc.2010.05.053", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1050790378"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.apsusc.2011.05.021", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051615252"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.clay.2007.12.005", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052020841"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.polymdegradstab.2013.02.006", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1053083482"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2017-03", 
    "datePublishedReg": "2017-03-01", 
    "description": "In this study, in situ synthesis of acrylonitrile-butadiene-styrene rubber particles containing hydrophobic silica nanoparticles (HDTMS-silica) was carried out. Firstly, three of HDTMS-silicas (HDTMS-silica1, HDTMS-silica2, and HDTMS-silica3) were prepared by silanization of SiO2 nanoparticle with hexadecyltrimethoxysilane (HDTMS : SiO2 wt ratios of 1 : 1, 2 : 1, and 3 : 1) in an emulsion system. Then, HDTMS-silica/styrene and acrylonitrile mixture was fed into a polybutadiene latex reactor. Following that, graft copolymerization was carried out using persulfate initiator at temperature of 65 \u00b0C for 3.5 h. Thus obtained Acrylonitrile-butadiene-styrene rubber containing HDTMS-silica was melt extruded with styrene-acrylonitrile (SAN) to prepare ABS nanocomposite compound. Mechanical properties of ABS nanocomposite compounds were evaluated. It was found that all of HDTMS : SiO2 wt ratios produced hydrophobic SiO2 nanoparticles exhibiting good dispersibility in toluene test. In fact, 3 : 1 HDTMS : SiO2 showed the complete hydrophobicity modification, judged by the absence of silanol absorption band. However, the optimum mechanical properties were achieved at 2 wt% loading of 2 : 1 HDTMS: SiO2. Below 2 : 1 ratio, the HDTMS ratio was not enough to obtain the fully hydrophobic surface modification. Above 2 : 1 ratio, the excessive HDTMS ratio led to a decrease in SiO2 content judged by Si EDX mapping, causing a gradual decrease in its energy absorption and reinforcement performance. In case of 2 : 1 HDTMS : SiO2, optimum mechanical properties were achievable at 2 wt% HDTMS-SiO2 loading, resulting from the optimum dispersibility of HDTMS-SiO2 nanoparticles. Further increase in HDTMS-SiO2 loading resulted in a reverse effect due to agglomeration problem. ", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s10971-016-4252-4", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1048337", 
        "issn": [
          "0928-0707", 
          "1573-4846"
        ], 
        "name": "Journal of Sol-Gel Science and Technology", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "3", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "81"
      }
    ], 
    "name": "In situ synthesis of ABS containing hydrophobic silica nanoparticles and their effects on mechanical properties", 
    "pagination": "774-781", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "1ed833849e30e3ef4bcceffe9d7094dd1d0310260fa3ee6e30b7d5ccd34c5aae"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s10971-016-4252-4"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1006475592"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s10971-016-4252-4", 
      "https://app.dimensions.ai/details/publication/pub.1006475592"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T12:35", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000363_0000000363/records_70027_00000000.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://link.springer.com/10.1007%2Fs10971-016-4252-4"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s10971-016-4252-4'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s10971-016-4252-4'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s10971-016-4252-4'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s10971-016-4252-4'


 

This table displays all metadata directly associated to this object as RDF triples.

145 TRIPLES      21 PREDICATES      52 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s10971-016-4252-4 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author Nbc602afc68ea400ba0e9646025370016
4 schema:citation sg:pub.10.1007/s10971-014-3530-2
5 https://doi.org/10.1016/j.apsusc.2009.11.030
6 https://doi.org/10.1016/j.apsusc.2010.05.053
7 https://doi.org/10.1016/j.apsusc.2011.05.021
8 https://doi.org/10.1016/j.apsusc.2011.09.074
9 https://doi.org/10.1016/j.cap.2006.01.009
10 https://doi.org/10.1016/j.clay.2007.12.005
11 https://doi.org/10.1016/j.clay.2012.04.024
12 https://doi.org/10.1016/j.colsurfa.2012.11.057
13 https://doi.org/10.1016/j.compositesb.2011.02.008
14 https://doi.org/10.1016/j.eurpolymj.2005.08.002
15 https://doi.org/10.1016/j.eurpolymj.2006.01.012
16 https://doi.org/10.1016/j.eurpolymj.2012.10.003
17 https://doi.org/10.1016/j.jcis.2006.10.005
18 https://doi.org/10.1016/j.jiec.2008.02.002
19 https://doi.org/10.1016/j.matdes.2013.11.060
20 https://doi.org/10.1016/j.matlet.2012.09.041
21 https://doi.org/10.1016/j.polymdegradstab.2008.08.006
22 https://doi.org/10.1016/j.polymdegradstab.2013.02.006
23 https://doi.org/10.1016/j.polymer.2007.07.061
24 https://doi.org/10.1016/j.polymertesting.2012.09.003
25 https://doi.org/10.1016/j.porgcoat.2012.05.013
26 https://doi.org/10.1016/j.proeng.2012.07.361
27 https://doi.org/10.1016/s0021-9797(03)00716-1
28 https://doi.org/10.5012/bkcs.2013.34.9.2747
29 schema:datePublished 2017-03
30 schema:datePublishedReg 2017-03-01
31 schema:description In this study, in situ synthesis of acrylonitrile-butadiene-styrene rubber particles containing hydrophobic silica nanoparticles (HDTMS-silica) was carried out. Firstly, three of HDTMS-silicas (HDTMS-silica1, HDTMS-silica2, and HDTMS-silica3) were prepared by silanization of SiO2 nanoparticle with hexadecyltrimethoxysilane (HDTMS : SiO2 wt ratios of 1 : 1, 2 : 1, and 3 : 1) in an emulsion system. Then, HDTMS-silica/styrene and acrylonitrile mixture was fed into a polybutadiene latex reactor. Following that, graft copolymerization was carried out using persulfate initiator at temperature of 65 °C for 3.5 h. Thus obtained Acrylonitrile-butadiene-styrene rubber containing HDTMS-silica was melt extruded with styrene-acrylonitrile (SAN) to prepare ABS nanocomposite compound. Mechanical properties of ABS nanocomposite compounds were evaluated. It was found that all of HDTMS : SiO2 wt ratios produced hydrophobic SiO2 nanoparticles exhibiting good dispersibility in toluene test. In fact, 3 : 1 HDTMS : SiO2 showed the complete hydrophobicity modification, judged by the absence of silanol absorption band. However, the optimum mechanical properties were achieved at 2 wt% loading of 2 : 1 HDTMS: SiO2. Below 2 : 1 ratio, the HDTMS ratio was not enough to obtain the fully hydrophobic surface modification. Above 2 : 1 ratio, the excessive HDTMS ratio led to a decrease in SiO2 content judged by Si EDX mapping, causing a gradual decrease in its energy absorption and reinforcement performance. In case of 2 : 1 HDTMS : SiO2, optimum mechanical properties were achievable at 2 wt% HDTMS-SiO2 loading, resulting from the optimum dispersibility of HDTMS-SiO2 nanoparticles. Further increase in HDTMS-SiO2 loading resulted in a reverse effect due to agglomeration problem.
32 schema:genre research_article
33 schema:inLanguage en
34 schema:isAccessibleForFree false
35 schema:isPartOf N153f7830ddd749ec9ab1fdd5c9442b73
36 N88a70106bc0c4cfba01151e7ca734cbe
37 sg:journal.1048337
38 schema:name In situ synthesis of ABS containing hydrophobic silica nanoparticles and their effects on mechanical properties
39 schema:pagination 774-781
40 schema:productId N1623bb0462c64943b74f4b5d2f0657f8
41 N20a0a2cc1aff408d888d99708eee6853
42 N38b412caed364a448cbfe95ff2b1b65e
43 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006475592
44 https://doi.org/10.1007/s10971-016-4252-4
45 schema:sdDatePublished 2019-04-11T12:35
46 schema:sdLicense https://scigraph.springernature.com/explorer/license/
47 schema:sdPublisher Nfd3b480d21ee46a6b5cf64ee53c83ae1
48 schema:url https://link.springer.com/10.1007%2Fs10971-016-4252-4
49 sgo:license sg:explorer/license/
50 sgo:sdDataset articles
51 rdf:type schema:ScholarlyArticle
52 N153f7830ddd749ec9ab1fdd5c9442b73 schema:issueNumber 3
53 rdf:type schema:PublicationIssue
54 N1623bb0462c64943b74f4b5d2f0657f8 schema:name readcube_id
55 schema:value 1ed833849e30e3ef4bcceffe9d7094dd1d0310260fa3ee6e30b7d5ccd34c5aae
56 rdf:type schema:PropertyValue
57 N20a0a2cc1aff408d888d99708eee6853 schema:name dimensions_id
58 schema:value pub.1006475592
59 rdf:type schema:PropertyValue
60 N379fceb4e2b8457fa3f3098b50112e11 rdf:first sg:person.013147624565.07
61 rdf:rest rdf:nil
62 N38b412caed364a448cbfe95ff2b1b65e schema:name doi
63 schema:value 10.1007/s10971-016-4252-4
64 rdf:type schema:PropertyValue
65 N88a70106bc0c4cfba01151e7ca734cbe schema:volumeNumber 81
66 rdf:type schema:PublicationVolume
67 Nbc602afc68ea400ba0e9646025370016 rdf:first sg:person.010623757032.01
68 rdf:rest N379fceb4e2b8457fa3f3098b50112e11
69 Nfd3b480d21ee46a6b5cf64ee53c83ae1 schema:name Springer Nature - SN SciGraph project
70 rdf:type schema:Organization
71 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
72 schema:name Engineering
73 rdf:type schema:DefinedTerm
74 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
75 schema:name Materials Engineering
76 rdf:type schema:DefinedTerm
77 sg:journal.1048337 schema:issn 0928-0707
78 1573-4846
79 schema:name Journal of Sol-Gel Science and Technology
80 rdf:type schema:Periodical
81 sg:person.010623757032.01 schema:affiliation https://www.grid.ac/institutes/grid.7922.e
82 schema:familyName Chaikeaw
83 schema:givenName Charungkit
84 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010623757032.01
85 rdf:type schema:Person
86 sg:person.013147624565.07 schema:affiliation https://www.grid.ac/institutes/grid.7922.e
87 schema:familyName Srikulkit
88 schema:givenName Kawee
89 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013147624565.07
90 rdf:type schema:Person
91 sg:pub.10.1007/s10971-014-3530-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002511586
92 https://doi.org/10.1007/s10971-014-3530-2
93 rdf:type schema:CreativeWork
94 https://doi.org/10.1016/j.apsusc.2009.11.030 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037057178
95 rdf:type schema:CreativeWork
96 https://doi.org/10.1016/j.apsusc.2010.05.053 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050790378
97 rdf:type schema:CreativeWork
98 https://doi.org/10.1016/j.apsusc.2011.05.021 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051615252
99 rdf:type schema:CreativeWork
100 https://doi.org/10.1016/j.apsusc.2011.09.074 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035669895
101 rdf:type schema:CreativeWork
102 https://doi.org/10.1016/j.cap.2006.01.009 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032622833
103 rdf:type schema:CreativeWork
104 https://doi.org/10.1016/j.clay.2007.12.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052020841
105 rdf:type schema:CreativeWork
106 https://doi.org/10.1016/j.clay.2012.04.024 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045662680
107 rdf:type schema:CreativeWork
108 https://doi.org/10.1016/j.colsurfa.2012.11.057 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033234848
109 rdf:type schema:CreativeWork
110 https://doi.org/10.1016/j.compositesb.2011.02.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042617132
111 rdf:type schema:CreativeWork
112 https://doi.org/10.1016/j.eurpolymj.2005.08.002 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011704283
113 rdf:type schema:CreativeWork
114 https://doi.org/10.1016/j.eurpolymj.2006.01.012 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034493337
115 rdf:type schema:CreativeWork
116 https://doi.org/10.1016/j.eurpolymj.2012.10.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003977949
117 rdf:type schema:CreativeWork
118 https://doi.org/10.1016/j.jcis.2006.10.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036469479
119 rdf:type schema:CreativeWork
120 https://doi.org/10.1016/j.jiec.2008.02.002 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022483588
121 rdf:type schema:CreativeWork
122 https://doi.org/10.1016/j.matdes.2013.11.060 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011549455
123 rdf:type schema:CreativeWork
124 https://doi.org/10.1016/j.matlet.2012.09.041 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024687565
125 rdf:type schema:CreativeWork
126 https://doi.org/10.1016/j.polymdegradstab.2008.08.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005837678
127 rdf:type schema:CreativeWork
128 https://doi.org/10.1016/j.polymdegradstab.2013.02.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053083482
129 rdf:type schema:CreativeWork
130 https://doi.org/10.1016/j.polymer.2007.07.061 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036157349
131 rdf:type schema:CreativeWork
132 https://doi.org/10.1016/j.polymertesting.2012.09.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034715500
133 rdf:type schema:CreativeWork
134 https://doi.org/10.1016/j.porgcoat.2012.05.013 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006072624
135 rdf:type schema:CreativeWork
136 https://doi.org/10.1016/j.proeng.2012.07.361 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002027319
137 rdf:type schema:CreativeWork
138 https://doi.org/10.1016/s0021-9797(03)00716-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023973743
139 rdf:type schema:CreativeWork
140 https://doi.org/10.5012/bkcs.2013.34.9.2747 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039337412
141 rdf:type schema:CreativeWork
142 https://www.grid.ac/institutes/grid.7922.e schema:alternateName Chulalongkorn University
143 schema:name Center of Excellence on Petrochemical and Materials Technology, Chulalongkorn University, Bangkok, Thailand
144 Department of Materials Science, Faculty of Science, Chulalongkorn University, Bangkok, Thailand
145 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...