Effects of Cr addition on glass-forming ability and mechanical properties of Cu–Zr–Al bulk metallic glass View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2012-03-13

AUTHORS

W. Zhou, L. T. Kong, J. F. Li, Y. H. Zhou

ABSTRACT

Effects of a small amount addition of Cr on glass-forming ability (GFA) and mechanical properties of Cu–Zr–Al bulk metallic glass were investigated. The GFA of (Cu46Zr46Al8)100−xCrx (x = 0, 0.25, 0.5, 0.75, and 1 at%) alloys tends to decrease with the increasing Cr content. A good correlation between the GFA and the temperature interval of supercooled liquid region ΔTx or parameter γ exists in these alloys. Addition of an appropriate amount of Cr can significantly improve the plasticity of the alloys. The bulk metallic glass with x = 0.5 exhibits promising mechanical properties with high fracture strength of 1870 MPa and obvious plastic strain of 2.23%. More... »

PAGES

4996-5001

References to SciGraph publications

  • 2009-02-01. Failure behavior of Cu–Ti–Zr-based bulk metallic glass alloys in JOURNAL OF MATERIALS SCIENCE
  • 2005-12-18. Temperature rise at shear bands in metallic glasses in NATURE MATERIALS
  • 2010-11-11. Glass-forming ability and thermoplastic formability of a Pd40Ni40Si4P16 glassy alloy in JOURNAL OF MATERIALS SCIENCE
  • 2008-12-01. Solid-state amorphization of Cu + Zr multi-stacks by ARB and HPT techniques in JOURNAL OF MATERIALS SCIENCE
  • 2007-02. Mechanical properties of bulk metallic glasses and composites in JOURNAL OF MATERIALS RESEARCH
  • 1960-09. Non-crystalline Structure in Solidified Gold–Silicon Alloys in NATURE
  • 2007-02. Design of a bulk amorphous alloy containing Cu–Zr with simultaneous improvement in glass-forming ability and plasticity in JOURNAL OF MATERIALS RESEARCH
  • 2009-05-15. Effects of additional elements (M) on the thermal stability and structure of (Zr52.2Cu39.1Al8.7)100−xMx (M = Ag, Be, Gd, x = 8, 7, 2) amorphous alloys in JOURNAL OF MATERIALS SCIENCE
  • 2009-08-01. Microstructural and mechanical behavior of Zr-based metallic glasses with the addition of Nb in JOURNAL OF MATERIALS SCIENCE
  • 2008-02. Designing metallic glass matrix composites with high toughness and tensile ductility in NATURE
  • 2011-10-18. Microstructure and mechanical property of Zr65Al7.5Ni10Cu12.5Ag5 bulk metallic glass subjected to rolling in JOURNAL OF MATERIALS SCIENCE
  • 2010-05-21. Glass forming ability of Fe–Co–Zr–Nd–B alloys and bulk permanent magnets derived from amorphous precursor in JOURNAL OF MATERIALS SCIENCE
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s10853-012-6375-5

    DOI

    http://dx.doi.org/10.1007/s10853-012-6375-5

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1045980501


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China", 
              "id": "http://www.grid.ac/institutes/grid.16821.3c", 
              "name": [
                "State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zhou", 
            "givenName": "W.", 
            "id": "sg:person.010326435157.84", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010326435157.84"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China", 
              "id": "http://www.grid.ac/institutes/grid.16821.3c", 
              "name": [
                "State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Kong", 
            "givenName": "L. T.", 
            "id": "sg:person.0733056026.17", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0733056026.17"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China", 
              "id": "http://www.grid.ac/institutes/grid.16821.3c", 
              "name": [
                "State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Li", 
            "givenName": "J. F.", 
            "id": "sg:person.014153265005.52", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014153265005.52"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China", 
              "id": "http://www.grid.ac/institutes/grid.16821.3c", 
              "name": [
                "State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zhou", 
            "givenName": "Y. H.", 
            "id": "sg:person.012060425461.24", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012060425461.24"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/s10853-010-5043-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012580989", 
              "https://doi.org/10.1007/s10853-010-5043-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1557/jmr.2007.0050", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035034841", 
              "https://doi.org/10.1557/jmr.2007.0050"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-009-3661-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014796064", 
              "https://doi.org/10.1007/s10853-009-3661-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-011-6027-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028229521", 
              "https://doi.org/10.1007/s10853-011-6027-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-008-2634-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1031116444", 
              "https://doi.org/10.1007/s10853-008-2634-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1557/jmr.2007.0063", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018171742", 
              "https://doi.org/10.1557/jmr.2007.0063"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-008-3194-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042620314", 
              "https://doi.org/10.1007/s10853-008-3194-9"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/187869b0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018841532", 
              "https://doi.org/10.1038/187869b0"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/nmat1536", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035691384", 
              "https://doi.org/10.1038/nmat1536"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-009-3523-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048890927", 
              "https://doi.org/10.1007/s10853-009-3523-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1038/nature06598", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037157089", 
              "https://doi.org/10.1038/nature06598"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10853-010-4614-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043319580", 
              "https://doi.org/10.1007/s10853-010-4614-1"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2012-03-13", 
        "datePublishedReg": "2012-03-13", 
        "description": "Effects of a small amount addition of Cr on glass-forming ability (GFA) and mechanical properties of Cu\u2013Zr\u2013Al bulk metallic glass were investigated. The GFA of (Cu46Zr46Al8)100\u2212xCrx (x\u00a0=\u00a00, 0.25, 0.5, 0.75, and 1 at%) alloys tends to decrease with the increasing Cr content. A good correlation between the GFA and the temperature interval of supercooled liquid region \u0394Tx or parameter \u03b3 exists in these alloys. Addition of an appropriate amount of Cr can significantly improve the plasticity of the alloys. The bulk metallic glass with x\u00a0=\u00a00.5 exhibits promising mechanical properties with high fracture strength of 1870\u00a0MPa and obvious plastic strain of 2.23%.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/s10853-012-6375-5", 
        "isAccessibleForFree": false, 
        "isFundedItemOf": [
          {
            "id": "sg:grant.4989149", 
            "type": "MonetaryGrant"
          }, 
          {
            "id": "sg:grant.4953607", 
            "type": "MonetaryGrant"
          }
        ], 
        "isPartOf": [
          {
            "id": "sg:journal.1312116", 
            "issn": [
              "0022-2461", 
              "1573-4803"
            ], 
            "name": "Journal of Materials Science", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "12", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "47"
          }
        ], 
        "keywords": [
          "bulk metallic glass", 
          "glass-forming ability", 
          "Al bulk metallic glasses", 
          "mechanical properties", 
          "metallic glasses", 
          "Cu\u2013Zr", 
          "obvious plastic strain", 
          "high fracture strength", 
          "liquid region \u0394Tx", 
          "small amount addition", 
          "plastic strain", 
          "fracture strength", 
          "Cr addition", 
          "Cr content", 
          "alloy", 
          "appropriate amount", 
          "glass", 
          "temperature interval", 
          "properties", 
          "\u0394Tx", 
          "MPa", 
          "parameter \u03b3", 
          "Cr", 
          "good correlation", 
          "strength", 
          "addition", 
          "effect", 
          "amount", 
          "content", 
          "strains", 
          "ability", 
          "plasticity", 
          "correlation", 
          "interval"
        ], 
        "name": "Effects of Cr addition on glass-forming ability and mechanical properties of Cu\u2013Zr\u2013Al bulk metallic glass", 
        "pagination": "4996-5001", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1045980501"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s10853-012-6375-5"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s10853-012-6375-5", 
          "https://app.dimensions.ai/details/publication/pub.1045980501"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-12-01T06:29", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20221201/entities/gbq_results/article/article_554.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/s10853-012-6375-5"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s10853-012-6375-5'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s10853-012-6375-5'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s10853-012-6375-5'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s10853-012-6375-5'


     

    This table displays all metadata directly associated to this object as RDF triples.

    164 TRIPLES      21 PREDICATES      70 URIs      50 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s10853-012-6375-5 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author Nc476fc85e7a04c3b9bd6e598cd8a7685
    4 schema:citation sg:pub.10.1007/s10853-008-2634-x
    5 sg:pub.10.1007/s10853-008-3194-9
    6 sg:pub.10.1007/s10853-009-3523-7
    7 sg:pub.10.1007/s10853-009-3661-y
    8 sg:pub.10.1007/s10853-010-4614-1
    9 sg:pub.10.1007/s10853-010-5043-x
    10 sg:pub.10.1007/s10853-011-6027-1
    11 sg:pub.10.1038/187869b0
    12 sg:pub.10.1038/nature06598
    13 sg:pub.10.1038/nmat1536
    14 sg:pub.10.1557/jmr.2007.0050
    15 sg:pub.10.1557/jmr.2007.0063
    16 schema:datePublished 2012-03-13
    17 schema:datePublishedReg 2012-03-13
    18 schema:description Effects of a small amount addition of Cr on glass-forming ability (GFA) and mechanical properties of Cu–Zr–Al bulk metallic glass were investigated. The GFA of (Cu46Zr46Al8)100−xCrx (x = 0, 0.25, 0.5, 0.75, and 1 at%) alloys tends to decrease with the increasing Cr content. A good correlation between the GFA and the temperature interval of supercooled liquid region ΔTx or parameter γ exists in these alloys. Addition of an appropriate amount of Cr can significantly improve the plasticity of the alloys. The bulk metallic glass with x = 0.5 exhibits promising mechanical properties with high fracture strength of 1870 MPa and obvious plastic strain of 2.23%.
    19 schema:genre article
    20 schema:isAccessibleForFree false
    21 schema:isPartOf N60cab0fb4a3348e299d7c3d49b2ca67a
    22 Ne0f502ba033e4fa580ab5692a798f72a
    23 sg:journal.1312116
    24 schema:keywords Al bulk metallic glasses
    25 Cr
    26 Cr addition
    27 Cr content
    28 Cu–Zr
    29 MPa
    30 ability
    31 addition
    32 alloy
    33 amount
    34 appropriate amount
    35 bulk metallic glass
    36 content
    37 correlation
    38 effect
    39 fracture strength
    40 glass
    41 glass-forming ability
    42 good correlation
    43 high fracture strength
    44 interval
    45 liquid region ΔTx
    46 mechanical properties
    47 metallic glasses
    48 obvious plastic strain
    49 parameter γ
    50 plastic strain
    51 plasticity
    52 properties
    53 small amount addition
    54 strains
    55 strength
    56 temperature interval
    57 ΔTx
    58 schema:name Effects of Cr addition on glass-forming ability and mechanical properties of Cu–Zr–Al bulk metallic glass
    59 schema:pagination 4996-5001
    60 schema:productId N8a5fa226e9cd4e42b797a447fa7051f0
    61 Naa17d71a686745858e980eff254dcdc0
    62 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045980501
    63 https://doi.org/10.1007/s10853-012-6375-5
    64 schema:sdDatePublished 2022-12-01T06:29
    65 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    66 schema:sdPublisher N750d413288814ae9ae75bf1b1aa56f9c
    67 schema:url https://doi.org/10.1007/s10853-012-6375-5
    68 sgo:license sg:explorer/license/
    69 sgo:sdDataset articles
    70 rdf:type schema:ScholarlyArticle
    71 N1f87bbd833434a0ab71bbb6e520e0c6d rdf:first sg:person.012060425461.24
    72 rdf:rest rdf:nil
    73 N60cab0fb4a3348e299d7c3d49b2ca67a schema:volumeNumber 47
    74 rdf:type schema:PublicationVolume
    75 N750d413288814ae9ae75bf1b1aa56f9c schema:name Springer Nature - SN SciGraph project
    76 rdf:type schema:Organization
    77 N8a5fa226e9cd4e42b797a447fa7051f0 schema:name dimensions_id
    78 schema:value pub.1045980501
    79 rdf:type schema:PropertyValue
    80 Naa17d71a686745858e980eff254dcdc0 schema:name doi
    81 schema:value 10.1007/s10853-012-6375-5
    82 rdf:type schema:PropertyValue
    83 Nc476fc85e7a04c3b9bd6e598cd8a7685 rdf:first sg:person.010326435157.84
    84 rdf:rest Ne8b16966eb284a6384f504e0387c2be5
    85 Ne0f502ba033e4fa580ab5692a798f72a schema:issueNumber 12
    86 rdf:type schema:PublicationIssue
    87 Ne74f59e8f290413687c4f61f8f205871 rdf:first sg:person.014153265005.52
    88 rdf:rest N1f87bbd833434a0ab71bbb6e520e0c6d
    89 Ne8b16966eb284a6384f504e0387c2be5 rdf:first sg:person.0733056026.17
    90 rdf:rest Ne74f59e8f290413687c4f61f8f205871
    91 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    92 schema:name Engineering
    93 rdf:type schema:DefinedTerm
    94 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    95 schema:name Materials Engineering
    96 rdf:type schema:DefinedTerm
    97 sg:grant.4953607 http://pending.schema.org/fundedItem sg:pub.10.1007/s10853-012-6375-5
    98 rdf:type schema:MonetaryGrant
    99 sg:grant.4989149 http://pending.schema.org/fundedItem sg:pub.10.1007/s10853-012-6375-5
    100 rdf:type schema:MonetaryGrant
    101 sg:journal.1312116 schema:issn 0022-2461
    102 1573-4803
    103 schema:name Journal of Materials Science
    104 schema:publisher Springer Nature
    105 rdf:type schema:Periodical
    106 sg:person.010326435157.84 schema:affiliation grid-institutes:grid.16821.3c
    107 schema:familyName Zhou
    108 schema:givenName W.
    109 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010326435157.84
    110 rdf:type schema:Person
    111 sg:person.012060425461.24 schema:affiliation grid-institutes:grid.16821.3c
    112 schema:familyName Zhou
    113 schema:givenName Y. H.
    114 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012060425461.24
    115 rdf:type schema:Person
    116 sg:person.014153265005.52 schema:affiliation grid-institutes:grid.16821.3c
    117 schema:familyName Li
    118 schema:givenName J. F.
    119 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014153265005.52
    120 rdf:type schema:Person
    121 sg:person.0733056026.17 schema:affiliation grid-institutes:grid.16821.3c
    122 schema:familyName Kong
    123 schema:givenName L. T.
    124 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0733056026.17
    125 rdf:type schema:Person
    126 sg:pub.10.1007/s10853-008-2634-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1031116444
    127 https://doi.org/10.1007/s10853-008-2634-x
    128 rdf:type schema:CreativeWork
    129 sg:pub.10.1007/s10853-008-3194-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042620314
    130 https://doi.org/10.1007/s10853-008-3194-9
    131 rdf:type schema:CreativeWork
    132 sg:pub.10.1007/s10853-009-3523-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048890927
    133 https://doi.org/10.1007/s10853-009-3523-7
    134 rdf:type schema:CreativeWork
    135 sg:pub.10.1007/s10853-009-3661-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1014796064
    136 https://doi.org/10.1007/s10853-009-3661-y
    137 rdf:type schema:CreativeWork
    138 sg:pub.10.1007/s10853-010-4614-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043319580
    139 https://doi.org/10.1007/s10853-010-4614-1
    140 rdf:type schema:CreativeWork
    141 sg:pub.10.1007/s10853-010-5043-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1012580989
    142 https://doi.org/10.1007/s10853-010-5043-x
    143 rdf:type schema:CreativeWork
    144 sg:pub.10.1007/s10853-011-6027-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028229521
    145 https://doi.org/10.1007/s10853-011-6027-1
    146 rdf:type schema:CreativeWork
    147 sg:pub.10.1038/187869b0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018841532
    148 https://doi.org/10.1038/187869b0
    149 rdf:type schema:CreativeWork
    150 sg:pub.10.1038/nature06598 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037157089
    151 https://doi.org/10.1038/nature06598
    152 rdf:type schema:CreativeWork
    153 sg:pub.10.1038/nmat1536 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035691384
    154 https://doi.org/10.1038/nmat1536
    155 rdf:type schema:CreativeWork
    156 sg:pub.10.1557/jmr.2007.0050 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035034841
    157 https://doi.org/10.1557/jmr.2007.0050
    158 rdf:type schema:CreativeWork
    159 sg:pub.10.1557/jmr.2007.0063 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018171742
    160 https://doi.org/10.1557/jmr.2007.0063
    161 rdf:type schema:CreativeWork
    162 grid-institutes:grid.16821.3c schema:alternateName State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China
    163 schema:name State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 200240, Shanghai, China
    164 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...