Ontology type: schema:ScholarlyArticle
2019-02-28
AUTHORSKenneth C. Wang, Anja Jones, Shivkumar Kambhampati, Mohit N. Gilotra, Peter C. Liacouras, Satre Stuelke, Brian Shiu, Natalie Leong, S. Ashfaq Hasan, Eliot L. Siegel
ABSTRACTTo demonstrate the 3D printed appearance of glenoid morphologies relevant to shoulder replacement surgery and to evaluate the benefits of printed models of the glenoid with regard to surgical planning. A retrospective review of patients referred for shoulder CT was performed, leading to a cohort of nine patients without arthroplasty hardware and exhibiting glenoid changes relevant to shoulder arthroplasty planning. Thin slice CT images were used to create both humerus-subtracted volume renderings of the glenoid, as well as 3D surface models of the glenoid, and 11 printed models were created. Volume renderings, surface models, and printed models were reviewed by a musculoskeletal radiologist for accuracy. Four fellowship-trained orthopaedic surgeons specializing in shoulder surgery reviewed each case individually as follows: First, the source CT images were reviewed, and a score for the clarity of the bony morphologies relevant to shoulder arthroplasty surgery was given. The volume rendering was reviewed, and the clarity was again scored. Finally, the printed model was reviewed, and the clarity again scored. Each printed model was also scored for morphologic complexity, expected usefulness of the printed model, and physical properties of the model. Mann-Whitney-Wilcoxon signed rank tests of the clarity scores were calculated, and the Spearman's ρ correlation coefficient between complexity and usefulness scores was computed. Printed models demonstrated a range of glenoid bony changes including osteophytes, glenoid bone loss, retroversion, and biconcavity. Surgeons rated the glenoid morphology as more clear after review of humerus-subtracted volume rendering, compared with review of the source CT images (p = 0.00903). Clarity was also better with 3D printed models compared to CT (p = 0.00903) and better with 3D printed models compared to humerus-subtracted volume rendering (p = 0. 00879). The expected usefulness of printed models demonstrated a positive correlation with morphologic complexity, with Spearman's ρ 0.73 (p = 0.0108). 3D printing of the glenoid based on pre-operative CT provides a physical representation of patient anatomy. Printed models enabled shoulder surgeons to appreciate glenoid bony morphology more clearly compared to review of CT images or humerus-subtracted volume renderings. These models were more useful as glenoid complexity increased. More... »
PAGES1-11
http://scigraph.springernature.com/pub.10.1007/s10278-019-00177-4
DOIhttp://dx.doi.org/10.1007/s10278-019-00177-4
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1112464227
PUBMEDhttps://www.ncbi.nlm.nih.gov/pubmed/30820811
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/1103",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Clinical Sciences",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/11",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Medical and Health Sciences",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "Baltimore VA Medical Center",
"id": "https://www.grid.ac/institutes/grid.280711.d",
"name": [
"Baltimore VA Medical Center, Baltimore, MD, USA",
"Department of Diagnostic Radiology and Nuclear Medicine, University of Maryland, School of Medicine, Baltimore, MD, USA"
],
"type": "Organization"
},
"familyName": "Wang",
"givenName": "Kenneth C.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Rutgers University\u2013Newark",
"id": "https://www.grid.ac/institutes/grid.469131.8",
"name": [
"Department of Pathology and Laboratory Medicine, Rutgers New Jersey Medical School, Newark, NJ, USA"
],
"type": "Organization"
},
"familyName": "Jones",
"givenName": "Anja",
"type": "Person"
},
{
"affiliation": {
"name": [
"Southeast Radiology, Chester, PA, USA"
],
"type": "Organization"
},
"familyName": "Kambhampati",
"givenName": "Shivkumar",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Baltimore VA Medical Center",
"id": "https://www.grid.ac/institutes/grid.280711.d",
"name": [
"Baltimore VA Medical Center, Baltimore, MD, USA",
"Department of Orthopaedics, University of Maryland, School of Medicine, Baltimore, MD, USA"
],
"type": "Organization"
},
"familyName": "Gilotra",
"givenName": "Mohit N.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Walter Reed National Military Medical Center",
"id": "https://www.grid.ac/institutes/grid.414467.4",
"name": [
"3D Medical Applications Center, Department of Radiology, Walter Reed National Military Medical Center, Radiology and Radiological Services & Naval Postgraduate Dental School, Uniform Services University of the Health Sciences, Bethesda, MD, USA"
],
"type": "Organization"
},
"familyName": "Liacouras",
"givenName": "Peter C.",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Guthrie Hospice",
"id": "https://www.grid.ac/institutes/grid.413595.f",
"name": [
"Guthrie Clinic, Sayre, PA, USA"
],
"type": "Organization"
},
"familyName": "Stuelke",
"givenName": "Satre",
"type": "Person"
},
{
"affiliation": {
"name": [
"Department of Orthopaedics, University of Maryland, School of Medicine, Baltimore, MD, USA"
],
"type": "Organization"
},
"familyName": "Shiu",
"givenName": "Brian",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Baltimore VA Medical Center",
"id": "https://www.grid.ac/institutes/grid.280711.d",
"name": [
"Baltimore VA Medical Center, Baltimore, MD, USA",
"Department of Orthopaedics, University of Maryland, School of Medicine, Baltimore, MD, USA"
],
"type": "Organization"
},
"familyName": "Leong",
"givenName": "Natalie",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Baltimore VA Medical Center",
"id": "https://www.grid.ac/institutes/grid.280711.d",
"name": [
"Baltimore VA Medical Center, Baltimore, MD, USA",
"Department of Orthopaedics, University of Maryland, School of Medicine, Baltimore, MD, USA"
],
"type": "Organization"
},
"familyName": "Hasan",
"givenName": "S. Ashfaq",
"type": "Person"
},
{
"affiliation": {
"alternateName": "Baltimore VA Medical Center",
"id": "https://www.grid.ac/institutes/grid.280711.d",
"name": [
"Baltimore VA Medical Center, Baltimore, MD, USA",
"Department of Diagnostic Radiology and Nuclear Medicine, University of Maryland, School of Medicine, Baltimore, MD, USA"
],
"type": "Organization"
},
"familyName": "Siegel",
"givenName": "Eliot L.",
"type": "Person"
}
],
"citation": [
{
"id": "sg:pub.10.1007/s00261-016-1022-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002323786",
"https://doi.org/10.1007/s00261-016-1022-2"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1067/mse.2000.106921",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1005510254"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/bsd.0b013e3181d345cb",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1012891992"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/bsd.0b013e3181d345cb",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1012891992"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/bco.0000000000000159",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014398988"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/bco.0000000000000159",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1014398988"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jse.2009.05.008",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1015642702"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1148/rg.352140098",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1016024299"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jse.2004.10.006",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1016427050"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00264-014-2641-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1017786831",
"https://doi.org/10.1007/s00264-014-2641-2"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/sla.0b013e3181fdd012",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020709224"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/sla.0b013e3181fdd012",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020709224"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/sla.0b013e3181fdd012",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020709224"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/sla.0b013e3181fdd012",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020709224"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1161/circulationaha.107.740977",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020912747"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1067/mse.2001.115269",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1020935911"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00256-015-2282-6",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1023708719",
"https://doi.org/10.1007/s00256-015-2282-6"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.ijporl.2015.03.004",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1025891503"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11999-015-4135-y",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1028297730",
"https://doi.org/10.1007/s11999-015-4135-y"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s11999-015-4135-y",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1028297730",
"https://doi.org/10.1007/s11999-015-4135-y"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1007/s11999-015-4135-y",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1028297730"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jsurg.2013.08.010",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030066840"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jtcvs.2009.03.011",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030769397"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1302/0301-620x.88b5.16466",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1031898344"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1067/mse.2002.121146",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1032281515"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1148/rg.271065076",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1036114154"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jse.2014.07.004",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1038734648"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jse.2007.09.006",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1039756613"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1053/j.semvascsurg.2004.03.007",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1040731911"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jse.2007.02.112",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1041565368"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00264-010-1125-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1044115469",
"https://doi.org/10.1007/s00264-010-1125-2"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00264-010-1125-2",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1044115469",
"https://doi.org/10.1007/s00264-010-1125-2"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1108/13552541011025852",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1044450846"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jse.2014.06.054",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049881700"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1017/s002187820100810x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1054790263"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1302/0301-620x.98b8.37257",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1064888225"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2106/00004623-199274070-00009",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1068891197"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2106/jbjs.d.02813",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1068899525"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2106/jbjs.d.02813",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1068899525"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2106/jbjs.d.02813",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1068899525"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.2214/ajr.178.4.1780827",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1069324635"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.3171/2013.11.jns131066",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1071078416"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.3171/2013.11.jns131066",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1071078416"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.3171/2013.11.jns131066",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1071078416"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1148/rg.2015140320",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1079178736"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1148/rg.2015140260",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1079178737"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1126/sciadv.aas8652",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1104295236"
],
"type": "CreativeWork"
}
],
"datePublished": "2019-02-28",
"datePublishedReg": "2019-02-28",
"description": "To demonstrate the 3D printed appearance of glenoid morphologies relevant to shoulder replacement surgery and to evaluate the benefits of printed models of the glenoid with regard to surgical planning. A retrospective review of patients referred for shoulder CT was performed, leading to a cohort of nine patients without arthroplasty hardware and exhibiting glenoid changes relevant to shoulder arthroplasty planning. Thin slice CT images were used to create both humerus-subtracted volume renderings of the glenoid, as well as 3D surface models of the glenoid, and 11 printed models were created. Volume renderings, surface models, and printed models were reviewed by a musculoskeletal radiologist for accuracy. Four fellowship-trained orthopaedic surgeons specializing in shoulder surgery reviewed each case individually as follows: First, the source CT images were reviewed, and a score for the clarity of the bony morphologies relevant to shoulder arthroplasty surgery was given. The volume rendering was reviewed, and the clarity was again scored. Finally, the printed model was reviewed, and the clarity again scored. Each printed model was also scored for morphologic complexity, expected usefulness of the printed model, and physical properties of the model. Mann-Whitney-Wilcoxon signed rank tests of the clarity scores were calculated, and the Spearman's \u03c1 correlation coefficient between complexity and usefulness scores was computed. Printed models demonstrated a range of glenoid bony changes including osteophytes, glenoid bone loss, retroversion, and biconcavity. Surgeons rated the glenoid morphology as more clear after review of humerus-subtracted volume rendering, compared with review of the source CT images (p\u2009=\u20090.00903). Clarity was also better with 3D printed models compared to CT (p\u2009=\u20090.00903) and better with 3D printed models compared to humerus-subtracted volume rendering (p\u2009=\u20090. 00879). The expected usefulness of printed models demonstrated a positive correlation with morphologic complexity, with Spearman's \u03c1 0.73 (p\u2009=\u20090.0108). 3D printing of the glenoid based on pre-operative CT provides a physical representation of patient anatomy. Printed models enabled shoulder surgeons to appreciate glenoid bony morphology more clearly compared to review of CT images or humerus-subtracted volume renderings. These models were more useful as glenoid complexity increased.",
"genre": "research_article",
"id": "sg:pub.10.1007/s10278-019-00177-4",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1100894",
"issn": [
"0897-1889",
"1618-727X"
],
"name": "Journal of Digital Imaging",
"type": "Periodical"
}
],
"name": "CT-Based 3D Printing of the Glenoid Prior to Shoulder Arthroplasty: Bony Morphology and Model Evaluation",
"pagination": "1-11",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"cfcbffca41b085d94682a9ce9b53bb16cda4553421632cf85f9f1f0adb3c88f7"
]
},
{
"name": "pubmed_id",
"type": "PropertyValue",
"value": [
"30820811"
]
},
{
"name": "nlm_unique_id",
"type": "PropertyValue",
"value": [
"9100529"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s10278-019-00177-4"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1112464227"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s10278-019-00177-4",
"https://app.dimensions.ai/details/publication/pub.1112464227"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-11T10:30",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000349_0000000349/records_113644_00000005.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.1007%2Fs10278-019-00177-4"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s10278-019-00177-4'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s10278-019-00177-4'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s10278-019-00177-4'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s10278-019-00177-4'
This table displays all metadata directly associated to this object as RDF triples.
244 TRIPLES
21 PREDICATES
62 URIs
18 LITERALS
7 BLANK NODES