Shear bond strength and ultrastructural interface analysis of different adhesive systems to Er:YAG laser-prepared dentin View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2015-02

AUTHORS

Yeliz Guven, Oya Aktoren

ABSTRACT

The aim of this study was to evaluate the shear bond strength (SBS) of a microhybrid composite resin bonded with three different adhesive systems to Er:YAG laser- (EL) or bur-prepared dentin surfaces and to analyze the quality and ultrastructure of the adhesive-dentin interfaces by scanning electron microscopy (SEM). The specimens prepared for SBS test and SEM analysis were randomly assigned to eight groups (G1-G8): G1, EL (Fidelis PlusIII, Fotona) + Clearfil S3 Bond (C3S); G2, EL + AdperSE Plus (SE); G3, EL + laser etch + Adper Single Bond2 (SB2); G4, EL + acid etch + SB2; G5, EL + SB2 (no etching); G6, bur + acid etch + SB2; G7, bur + S3; G8, bur + SE. Laser was used in very short pulse mode at a setting of 200 mJ/20 Hz for dentin preparation and at 80 mJ/10 Hz for dentin etching. Bond strength test: 3.5 × 2.0 mm cylindrical molds were placed onto adhesives and filled with the composites. After 24 h in distilled water, SBS was tested at a crosshead speed of 0.5 mm/min. SEM analysis: The dentin-adhesive interfaces were evaluated for the ultrastructure of hybrid layer. Data of SBS (MPa) were statistically analyzed by ANOVA and Tukey HSD. ER:YAG laser-prepared dentin has demonstrated significantly more SBS (p < 0.01) for SE when compared to bur-prepared dentin. No significancies (p > 0.05) in SBS have been determined between the total-etch adhesive applied groups with regard to etching types. SEM analysis revealed that hybrid layers obtained in Er:YAG laser-irradiated dentin exhibited more irregular and non-homogeneous pattern than the conventionally prepared dentin. In conclusion, SE Bond demonstrated superior results in Er:YAG laser-ablated dentin compared to bur-prepared dentin. More... »

PAGES

769-778

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s10103-013-1424-0

DOI

http://dx.doi.org/10.1007/s10103-013-1424-0

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1008800815

PUBMED

https://www.ncbi.nlm.nih.gov/pubmed/23982720


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Composite Resins", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Dental Bonding", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Dental Cements", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Dentin", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Humans", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Lasers, Solid-State", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Materials Testing", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Shear Strength", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Istanbul University", 
          "id": "https://www.grid.ac/institutes/grid.9601.e", 
          "name": [
            "Department of Pedodontics, Faculty of Dentistry, Istanbul University, 34093, \u00c7apa, Istanbul, Turkey"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Guven", 
        "givenName": "Yeliz", 
        "id": "sg:person.0622706754.11", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0622706754.11"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Istanbul University", 
          "id": "https://www.grid.ac/institutes/grid.9601.e", 
          "name": [
            "Department of Pedodontics, Faculty of Dentistry, Istanbul University, 34093, \u00c7apa, Istanbul, Turkey"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Aktoren", 
        "givenName": "Oya", 
        "id": "sg:person.01156023746.66", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01156023746.66"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/s10103-007-0519-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000518711", 
          "https://doi.org/10.1007/s10103-007-0519-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-007-0519-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000518711", 
          "https://doi.org/10.1007/s10103-007-0519-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-007-0519-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000518711", 
          "https://doi.org/10.1007/s10103-007-0519-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.dental.2004.11.003", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003500827"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/lsm.10058", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005175187"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.dental.2007.02.009", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007326688"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-009-0652-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014680556", 
          "https://doi.org/10.1007/s10103-009-0652-9"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-009-0652-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014680556", 
          "https://doi.org/10.1007/s10103-009-0652-9"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-009-0652-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014680556", 
          "https://doi.org/10.1007/s10103-009-0652-9"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-009-0652-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014680556", 
          "https://doi.org/10.1007/s10103-009-0652-9"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/lsm.1900090405", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1017891966"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/lsm.20342", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1019281318"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1067/mpr.2000.108600", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1019828440"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0300-5712(03)00003-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021854245"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0300-5712(03)00003-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021854245"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0300-5712(97)00014-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022115393"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.dental.2010.10.023", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022276897"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-007-0532-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022782290", 
          "https://doi.org/10.1007/s10103-007-0532-0"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-007-0532-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022782290", 
          "https://doi.org/10.1007/s10103-007-0532-0"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-007-0532-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1022782290", 
          "https://doi.org/10.1007/s10103-007-0532-0"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/lsm.20063", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024035837"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/lsm.20064", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1025424047"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/3-540-28559-8_5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1033650969", 
          "https://doi.org/10.1007/3-540-28559-8_5"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1590/s0103-64402004000100002", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1037345998"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/10454411970080030501", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041438005"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/10454411970080030501", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041438005"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/lsm.10106", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1045626392"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/jemt.20470", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1049821027"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.14219/jada.archive.2003.0021", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051291646"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/jemt.20459", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052951582"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1089/104454702760090227", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1059203432"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1089/pho.2005.23.304", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1059305782"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1089/pho.2005.23.304", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1059305782"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1089/pho.2007.2044", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1059306008"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1089/pho.2007.2213", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1059306115"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/00220345960750011401", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063640748"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/00220345960750011401", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063640748"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/00220345960750091401", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063640868"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/00220345960750091401", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063640868"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/154405910208100207", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064058034"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.2341/07-84", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1070754362"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1074803002", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1076577602", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1076974481", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1077002991", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1077073653", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1077317701", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1077620270", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1077881675", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1077930787", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.3290/j.jad.a18136", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1078024647"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1078484133", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1082417026", 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://app.dimensions.ai/details/publication/pub.1083255536", 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2015-02", 
    "datePublishedReg": "2015-02-01", 
    "description": "The aim of this study was to evaluate the shear bond strength (SBS) of a microhybrid composite resin bonded with three different adhesive systems to Er:YAG laser- (EL) or bur-prepared dentin surfaces and to analyze the quality and ultrastructure of the adhesive-dentin interfaces by scanning electron microscopy (SEM). The specimens prepared for SBS test and SEM analysis were randomly assigned to eight groups (G1-G8): G1, EL (Fidelis PlusIII, Fotona)\u2009+\u2009Clearfil S3 Bond (C3S); G2, EL\u2009+\u2009AdperSE Plus (SE); G3, EL\u2009+\u2009laser etch\u2009+\u2009Adper Single Bond2 (SB2); G4, EL\u2009+\u2009acid etch\u2009+\u2009SB2; G5, EL\u2009+\u2009SB2 (no etching); G6, bur\u2009+\u2009acid etch\u2009+\u2009SB2; G7, bur\u2009+\u2009S3; G8, bur\u2009+\u2009SE. Laser was used in very short pulse mode at a setting of 200\u00a0mJ/20\u00a0Hz for dentin preparation and at 80\u00a0mJ/10\u00a0Hz for dentin etching. Bond strength test: 3.5\u2009\u00d7\u20092.0\u00a0mm cylindrical molds were placed onto adhesives and filled with the composites. After 24\u00a0h in distilled water, SBS was tested at a crosshead speed of 0.5\u00a0mm/min. SEM analysis: The dentin-adhesive interfaces were evaluated for the ultrastructure of hybrid layer. Data of SBS (MPa) were statistically analyzed by ANOVA and Tukey HSD. ER:YAG laser-prepared dentin has demonstrated significantly more SBS (p\u2009<\u20090.01) for SE when compared to bur-prepared dentin. No significancies (p\u2009>\u20090.05) in SBS have been determined between the total-etch adhesive applied groups with regard to etching types. SEM analysis revealed that hybrid layers obtained in Er:YAG laser-irradiated dentin exhibited more irregular and non-homogeneous pattern than the conventionally prepared dentin. In conclusion, SE Bond demonstrated superior results in Er:YAG laser-ablated dentin compared to bur-prepared dentin. ", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s10103-013-1424-0", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1096630", 
        "issn": [
          "0268-8921", 
          "1435-604X"
        ], 
        "name": "Lasers in Medical Science", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "2", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "30"
      }
    ], 
    "name": "Shear bond strength and ultrastructural interface analysis of different adhesive systems to Er:YAG laser-prepared dentin", 
    "pagination": "769-778", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "29ee6044300eab20f2e665ceb431719639b36eabcb17f9ba2e6f6cf4f628a06a"
        ]
      }, 
      {
        "name": "pubmed_id", 
        "type": "PropertyValue", 
        "value": [
          "23982720"
        ]
      }, 
      {
        "name": "nlm_unique_id", 
        "type": "PropertyValue", 
        "value": [
          "8611515"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s10103-013-1424-0"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1008800815"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s10103-013-1424-0", 
      "https://app.dimensions.ai/details/publication/pub.1008800815"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T09:54", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000347_0000000347/records_89798_00000000.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://link.springer.com/10.1007%2Fs10103-013-1424-0"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s10103-013-1424-0'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s10103-013-1424-0'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s10103-013-1424-0'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s10103-013-1424-0'


 

This table displays all metadata directly associated to this object as RDF triples.

226 TRIPLES      21 PREDICATES      79 URIs      29 LITERALS      17 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s10103-013-1424-0 schema:about N0b22e379dab046d9998faafa9fc6959a
2 N221ca8dc249f4164b837dfeac0abb27d
3 N3d5a70e09d2e439cac2cec4124db98af
4 N84b85c96863b401f93e336bf38d76e94
5 N8ab2c638134a42b98c3bf7570ce6e03c
6 N8b60ed1c7c9446d1bc5c9c18d6ea34b5
7 Nbb33ab040d504e0ca0276a0ea2b4afe3
8 Nf0d0d7c46e56498088153e0ec217ad91
9 anzsrc-for:09
10 anzsrc-for:0912
11 schema:author Na3e37eb3e8704c4f9f186113eaf6b630
12 schema:citation sg:pub.10.1007/3-540-28559-8_5
13 sg:pub.10.1007/s10103-007-0519-x
14 sg:pub.10.1007/s10103-007-0532-0
15 sg:pub.10.1007/s10103-009-0652-9
16 https://app.dimensions.ai/details/publication/pub.1074803002
17 https://app.dimensions.ai/details/publication/pub.1076577602
18 https://app.dimensions.ai/details/publication/pub.1076974481
19 https://app.dimensions.ai/details/publication/pub.1077002991
20 https://app.dimensions.ai/details/publication/pub.1077073653
21 https://app.dimensions.ai/details/publication/pub.1077317701
22 https://app.dimensions.ai/details/publication/pub.1077620270
23 https://app.dimensions.ai/details/publication/pub.1077881675
24 https://app.dimensions.ai/details/publication/pub.1077930787
25 https://app.dimensions.ai/details/publication/pub.1078484133
26 https://app.dimensions.ai/details/publication/pub.1082417026
27 https://app.dimensions.ai/details/publication/pub.1083255536
28 https://doi.org/10.1002/jemt.20459
29 https://doi.org/10.1002/jemt.20470
30 https://doi.org/10.1002/lsm.10058
31 https://doi.org/10.1002/lsm.10106
32 https://doi.org/10.1002/lsm.1900090405
33 https://doi.org/10.1002/lsm.20063
34 https://doi.org/10.1002/lsm.20064
35 https://doi.org/10.1002/lsm.20342
36 https://doi.org/10.1016/j.dental.2004.11.003
37 https://doi.org/10.1016/j.dental.2007.02.009
38 https://doi.org/10.1016/j.dental.2010.10.023
39 https://doi.org/10.1016/s0300-5712(03)00003-4
40 https://doi.org/10.1016/s0300-5712(97)00014-6
41 https://doi.org/10.1067/mpr.2000.108600
42 https://doi.org/10.1089/104454702760090227
43 https://doi.org/10.1089/pho.2005.23.304
44 https://doi.org/10.1089/pho.2007.2044
45 https://doi.org/10.1089/pho.2007.2213
46 https://doi.org/10.1177/00220345960750011401
47 https://doi.org/10.1177/00220345960750091401
48 https://doi.org/10.1177/10454411970080030501
49 https://doi.org/10.1177/154405910208100207
50 https://doi.org/10.14219/jada.archive.2003.0021
51 https://doi.org/10.1590/s0103-64402004000100002
52 https://doi.org/10.2341/07-84
53 https://doi.org/10.3290/j.jad.a18136
54 schema:datePublished 2015-02
55 schema:datePublishedReg 2015-02-01
56 schema:description The aim of this study was to evaluate the shear bond strength (SBS) of a microhybrid composite resin bonded with three different adhesive systems to Er:YAG laser- (EL) or bur-prepared dentin surfaces and to analyze the quality and ultrastructure of the adhesive-dentin interfaces by scanning electron microscopy (SEM). The specimens prepared for SBS test and SEM analysis were randomly assigned to eight groups (G1-G8): G1, EL (Fidelis PlusIII, Fotona) + Clearfil S3 Bond (C3S); G2, EL + AdperSE Plus (SE); G3, EL + laser etch + Adper Single Bond2 (SB2); G4, EL + acid etch + SB2; G5, EL + SB2 (no etching); G6, bur + acid etch + SB2; G7, bur + S3; G8, bur + SE. Laser was used in very short pulse mode at a setting of 200 mJ/20 Hz for dentin preparation and at 80 mJ/10 Hz for dentin etching. Bond strength test: 3.5 × 2.0 mm cylindrical molds were placed onto adhesives and filled with the composites. After 24 h in distilled water, SBS was tested at a crosshead speed of 0.5 mm/min. SEM analysis: The dentin-adhesive interfaces were evaluated for the ultrastructure of hybrid layer. Data of SBS (MPa) were statistically analyzed by ANOVA and Tukey HSD. ER:YAG laser-prepared dentin has demonstrated significantly more SBS (p < 0.01) for SE when compared to bur-prepared dentin. No significancies (p > 0.05) in SBS have been determined between the total-etch adhesive applied groups with regard to etching types. SEM analysis revealed that hybrid layers obtained in Er:YAG laser-irradiated dentin exhibited more irregular and non-homogeneous pattern than the conventionally prepared dentin. In conclusion, SE Bond demonstrated superior results in Er:YAG laser-ablated dentin compared to bur-prepared dentin.
57 schema:genre research_article
58 schema:inLanguage en
59 schema:isAccessibleForFree false
60 schema:isPartOf N50786a7eb24547a4873d307e25df9178
61 Nee93bffdefe64f22a892fa1183650880
62 sg:journal.1096630
63 schema:name Shear bond strength and ultrastructural interface analysis of different adhesive systems to Er:YAG laser-prepared dentin
64 schema:pagination 769-778
65 schema:productId N7e2c40e2e69b4f5f8ac6f1016fcbe7e7
66 N8a2b2974b8174c3bbc49075305fe0140
67 Ncfca54c1b0f34f7b8d9897e8092befe0
68 Ndd3d306fc4d0416c90b1ee82e096a5ca
69 Nfa4c7e47569046ccb6fd10333d9b3975
70 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008800815
71 https://doi.org/10.1007/s10103-013-1424-0
72 schema:sdDatePublished 2019-04-11T09:54
73 schema:sdLicense https://scigraph.springernature.com/explorer/license/
74 schema:sdPublisher N2215eceac04b4f0c8f0d4e599c69f3a0
75 schema:url https://link.springer.com/10.1007%2Fs10103-013-1424-0
76 sgo:license sg:explorer/license/
77 sgo:sdDataset articles
78 rdf:type schema:ScholarlyArticle
79 N0b22e379dab046d9998faafa9fc6959a schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
80 schema:name Dentin
81 rdf:type schema:DefinedTerm
82 N2215eceac04b4f0c8f0d4e599c69f3a0 schema:name Springer Nature - SN SciGraph project
83 rdf:type schema:Organization
84 N221ca8dc249f4164b837dfeac0abb27d schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
85 schema:name Materials Testing
86 rdf:type schema:DefinedTerm
87 N3d5a70e09d2e439cac2cec4124db98af schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
88 schema:name Humans
89 rdf:type schema:DefinedTerm
90 N50786a7eb24547a4873d307e25df9178 schema:volumeNumber 30
91 rdf:type schema:PublicationVolume
92 N7e2c40e2e69b4f5f8ac6f1016fcbe7e7 schema:name readcube_id
93 schema:value 29ee6044300eab20f2e665ceb431719639b36eabcb17f9ba2e6f6cf4f628a06a
94 rdf:type schema:PropertyValue
95 N84b85c96863b401f93e336bf38d76e94 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
96 schema:name Dental Cements
97 rdf:type schema:DefinedTerm
98 N8a2b2974b8174c3bbc49075305fe0140 schema:name doi
99 schema:value 10.1007/s10103-013-1424-0
100 rdf:type schema:PropertyValue
101 N8ab2c638134a42b98c3bf7570ce6e03c schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
102 schema:name Lasers, Solid-State
103 rdf:type schema:DefinedTerm
104 N8b60ed1c7c9446d1bc5c9c18d6ea34b5 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
105 schema:name Shear Strength
106 rdf:type schema:DefinedTerm
107 Na3e37eb3e8704c4f9f186113eaf6b630 rdf:first sg:person.0622706754.11
108 rdf:rest Nb6f99dfd75c446539f2124b24a1571a9
109 Nb6f99dfd75c446539f2124b24a1571a9 rdf:first sg:person.01156023746.66
110 rdf:rest rdf:nil
111 Nbb33ab040d504e0ca0276a0ea2b4afe3 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
112 schema:name Composite Resins
113 rdf:type schema:DefinedTerm
114 Ncfca54c1b0f34f7b8d9897e8092befe0 schema:name dimensions_id
115 schema:value pub.1008800815
116 rdf:type schema:PropertyValue
117 Ndd3d306fc4d0416c90b1ee82e096a5ca schema:name pubmed_id
118 schema:value 23982720
119 rdf:type schema:PropertyValue
120 Nee93bffdefe64f22a892fa1183650880 schema:issueNumber 2
121 rdf:type schema:PublicationIssue
122 Nf0d0d7c46e56498088153e0ec217ad91 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
123 schema:name Dental Bonding
124 rdf:type schema:DefinedTerm
125 Nfa4c7e47569046ccb6fd10333d9b3975 schema:name nlm_unique_id
126 schema:value 8611515
127 rdf:type schema:PropertyValue
128 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
129 schema:name Engineering
130 rdf:type schema:DefinedTerm
131 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
132 schema:name Materials Engineering
133 rdf:type schema:DefinedTerm
134 sg:journal.1096630 schema:issn 0268-8921
135 1435-604X
136 schema:name Lasers in Medical Science
137 rdf:type schema:Periodical
138 sg:person.01156023746.66 schema:affiliation https://www.grid.ac/institutes/grid.9601.e
139 schema:familyName Aktoren
140 schema:givenName Oya
141 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01156023746.66
142 rdf:type schema:Person
143 sg:person.0622706754.11 schema:affiliation https://www.grid.ac/institutes/grid.9601.e
144 schema:familyName Guven
145 schema:givenName Yeliz
146 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0622706754.11
147 rdf:type schema:Person
148 sg:pub.10.1007/3-540-28559-8_5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033650969
149 https://doi.org/10.1007/3-540-28559-8_5
150 rdf:type schema:CreativeWork
151 sg:pub.10.1007/s10103-007-0519-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1000518711
152 https://doi.org/10.1007/s10103-007-0519-x
153 rdf:type schema:CreativeWork
154 sg:pub.10.1007/s10103-007-0532-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022782290
155 https://doi.org/10.1007/s10103-007-0532-0
156 rdf:type schema:CreativeWork
157 sg:pub.10.1007/s10103-009-0652-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014680556
158 https://doi.org/10.1007/s10103-009-0652-9
159 rdf:type schema:CreativeWork
160 https://app.dimensions.ai/details/publication/pub.1074803002 schema:CreativeWork
161 https://app.dimensions.ai/details/publication/pub.1076577602 schema:CreativeWork
162 https://app.dimensions.ai/details/publication/pub.1076974481 schema:CreativeWork
163 https://app.dimensions.ai/details/publication/pub.1077002991 schema:CreativeWork
164 https://app.dimensions.ai/details/publication/pub.1077073653 schema:CreativeWork
165 https://app.dimensions.ai/details/publication/pub.1077317701 schema:CreativeWork
166 https://app.dimensions.ai/details/publication/pub.1077620270 schema:CreativeWork
167 https://app.dimensions.ai/details/publication/pub.1077881675 schema:CreativeWork
168 https://app.dimensions.ai/details/publication/pub.1077930787 schema:CreativeWork
169 https://app.dimensions.ai/details/publication/pub.1078484133 schema:CreativeWork
170 https://app.dimensions.ai/details/publication/pub.1082417026 schema:CreativeWork
171 https://app.dimensions.ai/details/publication/pub.1083255536 schema:CreativeWork
172 https://doi.org/10.1002/jemt.20459 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052951582
173 rdf:type schema:CreativeWork
174 https://doi.org/10.1002/jemt.20470 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049821027
175 rdf:type schema:CreativeWork
176 https://doi.org/10.1002/lsm.10058 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005175187
177 rdf:type schema:CreativeWork
178 https://doi.org/10.1002/lsm.10106 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045626392
179 rdf:type schema:CreativeWork
180 https://doi.org/10.1002/lsm.1900090405 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017891966
181 rdf:type schema:CreativeWork
182 https://doi.org/10.1002/lsm.20063 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024035837
183 rdf:type schema:CreativeWork
184 https://doi.org/10.1002/lsm.20064 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025424047
185 rdf:type schema:CreativeWork
186 https://doi.org/10.1002/lsm.20342 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019281318
187 rdf:type schema:CreativeWork
188 https://doi.org/10.1016/j.dental.2004.11.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003500827
189 rdf:type schema:CreativeWork
190 https://doi.org/10.1016/j.dental.2007.02.009 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007326688
191 rdf:type schema:CreativeWork
192 https://doi.org/10.1016/j.dental.2010.10.023 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022276897
193 rdf:type schema:CreativeWork
194 https://doi.org/10.1016/s0300-5712(03)00003-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021854245
195 rdf:type schema:CreativeWork
196 https://doi.org/10.1016/s0300-5712(97)00014-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022115393
197 rdf:type schema:CreativeWork
198 https://doi.org/10.1067/mpr.2000.108600 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019828440
199 rdf:type schema:CreativeWork
200 https://doi.org/10.1089/104454702760090227 schema:sameAs https://app.dimensions.ai/details/publication/pub.1059203432
201 rdf:type schema:CreativeWork
202 https://doi.org/10.1089/pho.2005.23.304 schema:sameAs https://app.dimensions.ai/details/publication/pub.1059305782
203 rdf:type schema:CreativeWork
204 https://doi.org/10.1089/pho.2007.2044 schema:sameAs https://app.dimensions.ai/details/publication/pub.1059306008
205 rdf:type schema:CreativeWork
206 https://doi.org/10.1089/pho.2007.2213 schema:sameAs https://app.dimensions.ai/details/publication/pub.1059306115
207 rdf:type schema:CreativeWork
208 https://doi.org/10.1177/00220345960750011401 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063640748
209 rdf:type schema:CreativeWork
210 https://doi.org/10.1177/00220345960750091401 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063640868
211 rdf:type schema:CreativeWork
212 https://doi.org/10.1177/10454411970080030501 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041438005
213 rdf:type schema:CreativeWork
214 https://doi.org/10.1177/154405910208100207 schema:sameAs https://app.dimensions.ai/details/publication/pub.1064058034
215 rdf:type schema:CreativeWork
216 https://doi.org/10.14219/jada.archive.2003.0021 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051291646
217 rdf:type schema:CreativeWork
218 https://doi.org/10.1590/s0103-64402004000100002 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037345998
219 rdf:type schema:CreativeWork
220 https://doi.org/10.2341/07-84 schema:sameAs https://app.dimensions.ai/details/publication/pub.1070754362
221 rdf:type schema:CreativeWork
222 https://doi.org/10.3290/j.jad.a18136 schema:sameAs https://app.dimensions.ai/details/publication/pub.1078024647
223 rdf:type schema:CreativeWork
224 https://www.grid.ac/institutes/grid.9601.e schema:alternateName Istanbul University
225 schema:name Department of Pedodontics, Faculty of Dentistry, Istanbul University, 34093, Çapa, Istanbul, Turkey
226 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...